From: Tom Tromey Date: Wed, 2 Dec 1998 12:42:22 +0000 (+0000) Subject: * texinfo.tex, config.guess, config.sub, install-sh: New X-Git-Tag: Release-1-3d~2 X-Git-Url: https://sourceware.org/git/?a=commitdiff_plain;h=91e54dcb800912c04bf00047fcf444534528298d;p=automake.git * texinfo.tex, config.guess, config.sub, install-sh: New versions. * ansi2knr.c: New version. --- diff --git a/ChangeLog b/ChangeLog index 42621819..8100200a 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,5 +1,9 @@ 1998-12-02 Tom Tromey + * texinfo.tex, config.guess, config.sub, install-sh: New + versions. + * ansi2knr.c: New version. + * automake.in (handle_configure): Quote @MAINTAINER_MODE_TRUE@ to avoid problems where AM_MAINTAINER_MODE is put into automake's own configure.in. diff --git a/ansi2knr.c b/ansi2knr.c index 80086856..148f7af4 100644 --- a/ansi2knr.c +++ b/ansi2knr.c @@ -1,6 +1,6 @@ -/* Copyright (C) 1989, 1997 Aladdin Enterprises. All rights reserved. */ +/* Copyright (C) 1989, 1997, 1998 Aladdin Enterprises. All rights reserved. */ -/*$Id: ansi2knr.c,v 1.9 1998/04/03 21:56:52 tromey Exp $*/ +/*$Id: ansi2knr.c $*/ /* Convert ANSI C function definitions to K&R ("traditional C") syntax */ /* @@ -40,9 +40,12 @@ program under the GPL. * identifier at the left margin, followed by a left parenthesis, * with a right parenthesis as the last character on the line, * and with a left brace as the first token on the following line - * (ignoring possible intervening comments). - * It will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. + * (ignoring possible intervening comments), except that a line + * consisting of only + * identifier1(identifier2) + * will not be considered a function definition unless identifier2 is + * the word "void". ansi2knr will recognize a multi-line header provided + * that no intervening line ends with a left or right brace or a semicolon. * These algorithms ignore whitespace and comments, except that * the function name must be the first thing on the line. * The following constructs will confuse it: @@ -55,35 +58,39 @@ program under the GPL. * The original and principal author of ansi2knr is L. Peter Deutsch * . Other authors are noted in the change history * that follows (in reverse chronological order): - lpd 97-12-08 made input_file optional; only closes input and/or + lpd 1998-11-09 added further hack to recognize identifier(void) + as being a procedure + lpd 1998-10-23 added hack to recognize lines consisting of + identifier1(identifier2) as *not* being procedures + lpd 1997-12-08 made input_file optional; only closes input and/or output file if not stdin or stdout respectively; prints usage message on stderr rather than stdout; adds --filename switch (changes suggested by ) - lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with + lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with compilers that don't understand void, as suggested by Tom Lane - lpd 96-01-15 changed to require that the first non-comment token + lpd 1996-01-15 changed to require that the first non-comment token on the line following a function header be a left brace, to reduce sensitivity to macros, as suggested by Tom Lane - lpd 95-06-22 removed #ifndefs whose sole purpose was to define + lpd 1995-06-22 removed #ifndefs whose sole purpose was to define undefined preprocessor symbols as 0; changed all #ifdefs for configuration symbols to #ifs - lpd 95-04-05 changed copyright notice to make it clear that + lpd 1995-04-05 changed copyright notice to make it clear that including ansi2knr in a program does not bring the entire program under the GPL - lpd 94-12-18 added conditionals for systems where ctype macros + lpd 1994-12-18 added conditionals for systems where ctype macros don't handle 8-bit characters properly, suggested by Francois Pinard ; removed --varargs switch (this is now the default) - lpd 94-10-10 removed CONFIG_BROKETS conditional - lpd 94-07-16 added some conditionals to help GNU `configure', + lpd 1994-10-10 removed CONFIG_BROKETS conditional + lpd 1994-07-16 added some conditionals to help GNU `configure', suggested by Francois Pinard ; properly erase prototype args in function parameters, contributed by Jim Avera ; correct error in writeblanks (it shouldn't erase EOLs) - lpd 89-xx-xx original version + lpd 1989-xx-xx original version */ /* Most of the conditionals here are to make ansi2knr work with */ @@ -397,6 +404,34 @@ test1(buf) key++; } } + { + char *id = p; + int len; + /* + * Check for identifier1(identifier2) and not + * identifier1(void). + */ + + while ( isidchar(*p) ) + p++; + len = p - id; + p = skipspace(p, 1); + if ( *p == ')' && (len != 4 || strncmp(id, "void", 4)) ) + return 0; /* not a function */ + } + /* + * If the last significant character was a ), we need to count + * parentheses, because it might be part of a formal parameter + * that is a procedure. + */ + if (contin > 0) { + int level = 0; + + for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) + level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); + if (level > 0) + contin = -1; + } return contin; } diff --git a/config.guess b/config.guess index e31f37dc..1ec70cc1 100755 --- a/config.guess +++ b/config.guess @@ -142,7 +142,7 @@ EOF SR2?01:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; - Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) + Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 @@ -222,6 +222,9 @@ EOF powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; + macppc:NetBSD:*:*) + echo powerpc-apple-netbsd${UNAME_RELEASE} + exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; @@ -327,7 +330,8 @@ EOF fi exit 0 ;; *:AIX:*:4) - if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc @@ -360,12 +364,44 @@ EOF hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; - 9000/[3478]??:HP-UX:*:*) + 9000/[34678]??:HP-UX:*:*) case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;; - 9000/8?? ) HP_ARCH=hppa1.0 ;; + 9000/6?? | 9000/7?? | 9000/80[24] | 9000/8?[13679] | 9000/892 ) + sed 's/^ //' << EOF >dummy.c + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (${CC-cc} dummy.c -o dummy 2>/dev/null ) && HP_ARCH=`./dummy` + rm -f dummy.c dummy esac HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} @@ -471,6 +507,9 @@ EOF hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; i?86:BSD/386:*:* | *:BSD/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; @@ -665,6 +704,13 @@ EOF echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; + i?86:UnixWare:*:*) + if /bin/uname -X 2>/dev/null >/dev/null ; then + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + fi + echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION} + exit 0 ;; pc:*:*:*) # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. diff --git a/config.sub b/config.sub index b077de37..f7911664 100644 --- a/config.sub +++ b/config.sub @@ -150,9 +150,8 @@ case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 \ - | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ - | hppa2.0 \ + | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ + | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \ | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ diff --git a/install-sh b/install-sh index e8436696..e9de2384 100755 --- a/install-sh +++ b/install-sh @@ -118,6 +118,7 @@ if [ x"$dir_arg" != x ]; then if [ -d $dst ]; then instcmd=: + chmodcmd="" else instcmd=mkdir fi diff --git a/lib/ansi2knr.c b/lib/ansi2knr.c index 80086856..148f7af4 100644 --- a/lib/ansi2knr.c +++ b/lib/ansi2knr.c @@ -1,6 +1,6 @@ -/* Copyright (C) 1989, 1997 Aladdin Enterprises. All rights reserved. */ +/* Copyright (C) 1989, 1997, 1998 Aladdin Enterprises. All rights reserved. */ -/*$Id: ansi2knr.c,v 1.9 1998/04/03 21:56:52 tromey Exp $*/ +/*$Id: ansi2knr.c $*/ /* Convert ANSI C function definitions to K&R ("traditional C") syntax */ /* @@ -40,9 +40,12 @@ program under the GPL. * identifier at the left margin, followed by a left parenthesis, * with a right parenthesis as the last character on the line, * and with a left brace as the first token on the following line - * (ignoring possible intervening comments). - * It will recognize a multi-line header provided that no intervening - * line ends with a left or right brace or a semicolon. + * (ignoring possible intervening comments), except that a line + * consisting of only + * identifier1(identifier2) + * will not be considered a function definition unless identifier2 is + * the word "void". ansi2knr will recognize a multi-line header provided + * that no intervening line ends with a left or right brace or a semicolon. * These algorithms ignore whitespace and comments, except that * the function name must be the first thing on the line. * The following constructs will confuse it: @@ -55,35 +58,39 @@ program under the GPL. * The original and principal author of ansi2knr is L. Peter Deutsch * . Other authors are noted in the change history * that follows (in reverse chronological order): - lpd 97-12-08 made input_file optional; only closes input and/or + lpd 1998-11-09 added further hack to recognize identifier(void) + as being a procedure + lpd 1998-10-23 added hack to recognize lines consisting of + identifier1(identifier2) as *not* being procedures + lpd 1997-12-08 made input_file optional; only closes input and/or output file if not stdin or stdout respectively; prints usage message on stderr rather than stdout; adds --filename switch (changes suggested by ) - lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with + lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with compilers that don't understand void, as suggested by Tom Lane - lpd 96-01-15 changed to require that the first non-comment token + lpd 1996-01-15 changed to require that the first non-comment token on the line following a function header be a left brace, to reduce sensitivity to macros, as suggested by Tom Lane - lpd 95-06-22 removed #ifndefs whose sole purpose was to define + lpd 1995-06-22 removed #ifndefs whose sole purpose was to define undefined preprocessor symbols as 0; changed all #ifdefs for configuration symbols to #ifs - lpd 95-04-05 changed copyright notice to make it clear that + lpd 1995-04-05 changed copyright notice to make it clear that including ansi2knr in a program does not bring the entire program under the GPL - lpd 94-12-18 added conditionals for systems where ctype macros + lpd 1994-12-18 added conditionals for systems where ctype macros don't handle 8-bit characters properly, suggested by Francois Pinard ; removed --varargs switch (this is now the default) - lpd 94-10-10 removed CONFIG_BROKETS conditional - lpd 94-07-16 added some conditionals to help GNU `configure', + lpd 1994-10-10 removed CONFIG_BROKETS conditional + lpd 1994-07-16 added some conditionals to help GNU `configure', suggested by Francois Pinard ; properly erase prototype args in function parameters, contributed by Jim Avera ; correct error in writeblanks (it shouldn't erase EOLs) - lpd 89-xx-xx original version + lpd 1989-xx-xx original version */ /* Most of the conditionals here are to make ansi2knr work with */ @@ -397,6 +404,34 @@ test1(buf) key++; } } + { + char *id = p; + int len; + /* + * Check for identifier1(identifier2) and not + * identifier1(void). + */ + + while ( isidchar(*p) ) + p++; + len = p - id; + p = skipspace(p, 1); + if ( *p == ')' && (len != 4 || strncmp(id, "void", 4)) ) + return 0; /* not a function */ + } + /* + * If the last significant character was a ), we need to count + * parentheses, because it might be part of a formal parameter + * that is a procedure. + */ + if (contin > 0) { + int level = 0; + + for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) + level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); + if (level > 0) + contin = -1; + } return contin; } diff --git a/lib/config.guess b/lib/config.guess index e31f37dc..1ec70cc1 100755 --- a/lib/config.guess +++ b/lib/config.guess @@ -142,7 +142,7 @@ EOF SR2?01:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; - Pyramid*:OSx*:*:*|MIS*:OSx*:*:*) + Pyramid*:OSx*:*:*|MIS*:OSx*:*:*|MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 @@ -222,6 +222,9 @@ EOF powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; + macppc:NetBSD:*:*) + echo powerpc-apple-netbsd${UNAME_RELEASE} + exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; @@ -327,7 +330,8 @@ EOF fi exit 0 ;; *:AIX:*:4) - if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc @@ -360,12 +364,44 @@ EOF hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; - 9000/[3478]??:HP-UX:*:*) + 9000/[34678]??:HP-UX:*:*) case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/7?? | 9000/8?[1679] ) HP_ARCH=hppa1.1 ;; - 9000/8?? ) HP_ARCH=hppa1.0 ;; + 9000/6?? | 9000/7?? | 9000/80[24] | 9000/8?[13679] | 9000/892 ) + sed 's/^ //' << EOF >dummy.c + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (${CC-cc} dummy.c -o dummy 2>/dev/null ) && HP_ARCH=`./dummy` + rm -f dummy.c dummy esac HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} @@ -471,6 +507,9 @@ EOF hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; i?86:BSD/386:*:* | *:BSD/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; @@ -665,6 +704,13 @@ EOF echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; + i?86:UnixWare:*:*) + if /bin/uname -X 2>/dev/null >/dev/null ; then + (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + fi + echo ${UNAME_MACHINE}-unixware-${UNAME_RELEASE}-${UNAME_VERSION} + exit 0 ;; pc:*:*:*) # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. diff --git a/lib/config.sub b/lib/config.sub index b077de37..f7911664 100644 --- a/lib/config.sub +++ b/lib/config.sub @@ -150,9 +150,8 @@ case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 \ - | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \ - | hppa2.0 \ + | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ + | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \ | alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \ | i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \ | mips64 | mipsel | mips64el | mips64orion | mips64orionel \ diff --git a/lib/install-sh b/lib/install-sh index e8436696..e9de2384 100755 --- a/lib/install-sh +++ b/lib/install-sh @@ -118,6 +118,7 @@ if [ x"$dir_arg" != x ]; then if [ -d $dst ]; then instcmd=: + chmodcmd="" else instcmd=mkdir fi diff --git a/lib/texinfo.tex b/lib/texinfo.tex index f2b8545e..2b8a9ccc 100644 --- a/lib/texinfo.tex +++ b/lib/texinfo.tex @@ -1,5 +1,9 @@ % texinfo.tex -- TeX macros to handle Texinfo files. -% $Id: texinfo.tex,v 2.253 1998/07/19 14:20:42 karl Exp $ +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{1998-11-13}% % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98 % Free Software Foundation, Inc. @@ -27,10 +31,10 @@ % reports; you can get the latest version from: % ftp://ftp.gnu.org/pub/gnu/texinfo.tex % /home/gd/gnu/doc/texinfo.tex on the GNU machines. -% (and all GNU mirrors, see ftp://ftp.gnu.org/pub/gnu/README.mirrors) +% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://tug.org/tex/texinfo.tex % ftp://ctan.org/macros/texinfo/texinfo.tex -% (and all CTAN mirrors, finger ctan@tug.org for a list). +% (and all CTAN mirrors, finger ctan@ctan.org for a list). % The texinfo.tex in the texinfo distribution itself could well be out % of date, so if that's what you're using, please check. % @@ -40,7 +44,7 @@ % % To process a Texinfo manual with TeX, it's most reliable to use the % texi2dvi shell script that comes with the distribution. For simple -% manuals, you can get away with: +% manuals, however, you can get away with: % tex foo.texi % texindex foo.?? % tex foo.texi @@ -50,21 +54,12 @@ % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. - -% Make it possible to create a .fmt file just by loading this file: -% if the underlying format is not loaded, start by loading it now. -% Added by gildea November 1993. -\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi - -% This automatically updates the version number based on RCS. -\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 2.253 $ -\message{Loading texinfo package [Version \texinfoversion]:} +\message{Loading texinfo [version \texinfoversion]:} % If in a .fmt file, print the version number % and turn on active characters that we couldn't do earlier because % they might have appeared in the input file name. -\everyjob{\message{[Texinfo version \texinfoversion]}\message{} +\everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} % Save some parts of plain tex whose names we will redefine. @@ -192,13 +187,16 @@ \shipout\vbox{% \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize - \line{\ewtop\hfil\ewtop}% - \nointerlineskip - \line{% - \vbox{\moveleft\cornerthick\nstop}% - \hfill - \vbox{\moveright\cornerthick\nstop}% - }% + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% \vskip\topandbottommargin \line\bgroup \hfil % center the page within the outer (page) hsize. @@ -221,13 +219,15 @@ \hfil\egroup % end of (centering) \line\bgroup \vskip\topandbottommargin plus1fill minus1fill \boxmaxdepth = \cornerthick - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox @@ -343,11 +343,11 @@ %% Call \inENV within environments (after a \begingroup) \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} \def\ENVcheck{% -\ifENV\errmessage{Still within an environment. Type Return to continue.} +\ifENV\errmessage{Still within an environment; press RETURN to continue} \endgroup\fi} % This is not perfect, but it should reduce lossage % @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Type to continue.} +\newhelp\EMsimple{Press RETURN to continue.} \outer\def\begin{\parsearg\beginxxx} @@ -849,7 +849,7 @@ where each line of input produces a line of output.} \immediate\write16{If you are running another version of TeX, relax.} \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} \immediate\write16{If you are stuck with version 3.0, run the} \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} \immediate\write16{ to use a workaround.} @@ -959,9 +959,17 @@ where each line of input produces a line of output.} % @value{foo} gets the text saved in variable foo. % -\def\value{\begingroup - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \valuexxx} +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} +} \def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's @@ -975,7 +983,7 @@ where each line of input produces a line of output.} % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']v}% + {[No value for ``#1'']}% \else \csname SET#1\endcsname \fi @@ -1190,8 +1198,8 @@ where each line of input produces a line of output.} \setfont\ninett\ttshape{9}{1000} \setfont\ninettsl\ttslshape{10}{900} \setfont\indrm\rmshape{9}{1000} -\setfont\indit\slshape{9}{1000} -\let\indsl=\indit +\setfont\indit\itshape{9}{1000} +\setfont\indsl\slshape{9}{1000} \let\indtt=\ninett \let\indttsl=\ninettsl \let\indsf=\indrm @@ -1340,13 +1348,14 @@ where each line of input produces a line of output.} % \smartitalic{ARG} outputs arg in italics, followed by an italic correction % unless the following character is such as not to need one. \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} \let\i=\smartitalic -\let\var=\smartitalic -\let\dfn=\smartitalic +\let\var=\smartslanted +\let\dfn=\smartslanted \let\emph=\smartitalic -\let\cite=\smartitalic +\let\cite=\smartslanted \def\b#1{{\bf #1}} \let\strong=\b @@ -1413,20 +1422,18 @@ where each line of input produces a line of output.} % and arrange explicitly to hyphenate at a dash. % -- rms. { -\catcode`\-=\active -\catcode`\_=\active -\catcode`\|=\active -\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex} -% The following is used by \doprintindex to insure that long function names -% wrap around. It is necessary for - and _ to be active before the index is -% read from the file, as \entry parses the arguments long before \code is -% ever called. -- mycroft -% _ is always active; and it shouldn't be \let = to an _ that is a -% subscript character anyway. Then, @cindex @samp{_} (for example) -% fails. --karl -\global\def\indexbreaks{% - \catcode`\-=\active \let-\realdash -} + \catcode`\-=\active + \catcode`\_=\active + % + \global\def\code{\begingroup + \catcode`\-=\active \let-\codedash + \catcode`\_=\active \let_\codeunder + \codex + } + % + % If we end up with any active - characters when handling the index, + % just treat them as a normal -. + \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} @@ -1834,15 +1841,13 @@ July\or August\or September\or October\or November\or December\fi \itemxneedsnegativevskipfalse \else % The item text fits into the space. Start a paragraph, so that the - % following text (if any) will end up on the same line. Since that - % text will be indented by \tableindent, we make the item text be in - % a zero-width box. + % following text (if any) will end up on the same line. \noindent % Do this with kerns and \unhbox so that if there is a footnote in % the item text, it can migrate to the main vertical list and % eventually be printed. \nobreak\kern-\tableindent - \dimen0 = \itemmax \advance\dimen0 by -\wd0 + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 \unhbox0 \nobreak\kern\dimen0 \endgroup @@ -2406,6 +2411,11 @@ width0pt\relax} \fi \def\copyright{\realbackslash copyright}% \def\tclose##1{\realbackslash tclose {##1}}% \def\code##1{\realbackslash code {##1}}% +\def\uref##1{\realbackslash uref {##1}}% +\def\url##1{\realbackslash url {##1}}% +\def\env##1{\realbackslash env {##1}}% +\def\command##1{\realbackslash command {##1}}% +\def\option##1{\realbackslash option {##1}}% \def\dotless##1{\realbackslash dotless {##1}}% \def\samp##1{\realbackslash samp {##1}}% \def\,##1{\realbackslash ,{##1}}% @@ -2421,6 +2431,7 @@ width0pt\relax} \fi \def\kbd##1{\realbackslash kbd {##1}}% \def\dfn##1{\realbackslash dfn {##1}}% \def\emph##1{\realbackslash emph {##1}}% +\def\acronym##1{\realbackslash acronym {##1}}% % % Handle some cases of @value -- where the variable name does not % contain - or _, and the value does not contain any @@ -2484,6 +2495,11 @@ width0pt\relax} \fi %\let\tt=\indexdummyfont \let\tclose=\indexdummyfont \let\code=\indexdummyfont +\let\url=\indexdummyfont +\let\uref=\indexdummyfont +\let\env=\indexdummyfont +\let\command=\indexdummyfont +\let\option=\indexdummyfont \let\file=\indexdummyfont \let\samp=\indexdummyfont \let\kbd=\indexdummyfont @@ -3990,20 +4006,18 @@ width0pt\relax} \fi % outside the @def... \dimen2=\leftskip \advance\dimen2 by -\defbodyindent -\dimen3=\rightskip -\advance\dimen3 by -\defbodyindent -\noindent % +\noindent \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 % +\parshape 2 0in \dimen0 \defargsindent \dimen1 % Now output arg 2 ("Function" or some such) % ending at \deftypemargin from the right margin, % but stuck inside a box of width 0 so it does not interfere with linebreaking {% Adjust \hsize to exclude the ambient margins, % so that \rightline will obey them. -\advance \hsize by -\dimen2 \advance \hsize by -\dimen3 -\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}% +\advance \hsize by -\dimen2 +\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% % Make all lines underfull and no complaints: \tolerance=10000 \hbadness=10000 \advance\leftskip by -\defbodyindent @@ -4024,7 +4038,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % 61 is `=' @@ -4042,7 +4056,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}}} @@ -4060,7 +4074,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} @@ -4072,7 +4086,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#5}}} @@ -4087,7 +4101,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % @@ -4104,7 +4118,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% \parindent=0in - \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent + \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines } @@ -4149,7 +4163,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\spacesplit{#3{#5}}} @@ -4511,6 +4525,17 @@ width0pt\relax} \fi \catcode`\^^M=12 \usembodybackslash} +\def\macroargctxt{% + \catcode`\~=12 + \catcode`\^=12 + \catcode`\_=12 + \catcode`\|=12 + \catcode`\<=12 + \catcode`\>=12 + \catcode`\+=12 + \catcode`\@=12 + \catcode`\\=12} + % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. @@ -4607,17 +4632,21 @@ width0pt\relax} \fi \noexpand\scanmacro{\temp}}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt \noexpand\braceorline\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \noexpand\scanmacro{\temp}}% + \egroup\noexpand\scanmacro{\temp}}% \else % many - \expandafter\xdef\csname\the\macname\endcsname##1{% + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname} + \expandafter\xdef\csname\the\macname xx\endcsname##1{% \csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname - \paramlist{\noexpand\scanmacro{\temp}}% + \paramlist{\egroup\noexpand\scanmacro{\temp}}% \fi \else \ifcase\paramno @@ -4627,18 +4656,24 @@ width0pt\relax} \fi \noexpand\scanmacro{\temp}\egroup}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt \noexpand\braceorline\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \else % many - \expandafter\xdef\csname\the\macname\endcsname##1{% + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname} + \expandafter\xdef\csname\the\macname xx\endcsname##1{% \csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname \paramlist{% + \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \fi @@ -5184,7 +5219,7 @@ width0pt\relax} \fi \vsize = #1\relax \advance\vsize by \topskip \outervsize = \vsize - \advance\outervsize by 0.6in + \advance\outervsize by 2\topandbottommargin \pageheight = \vsize % \hsize = #2\relax @@ -5424,5 +5459,9 @@ width0pt\relax} \fi @rm @c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d" +@c time-stamp-end: "}" @c End: diff --git a/texinfo.tex b/texinfo.tex index f2b8545e..2b8a9ccc 100644 --- a/texinfo.tex +++ b/texinfo.tex @@ -1,5 +1,9 @@ % texinfo.tex -- TeX macros to handle Texinfo files. -% $Id: texinfo.tex,v 2.253 1998/07/19 14:20:42 karl Exp $ +% +% Load plain if necessary, i.e., if running under initex. +\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi +% +\def\texinfoversion{1998-11-13}% % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98 % Free Software Foundation, Inc. @@ -27,10 +31,10 @@ % reports; you can get the latest version from: % ftp://ftp.gnu.org/pub/gnu/texinfo.tex % /home/gd/gnu/doc/texinfo.tex on the GNU machines. -% (and all GNU mirrors, see ftp://ftp.gnu.org/pub/gnu/README.mirrors) +% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html) % ftp://tug.org/tex/texinfo.tex % ftp://ctan.org/macros/texinfo/texinfo.tex -% (and all CTAN mirrors, finger ctan@tug.org for a list). +% (and all CTAN mirrors, finger ctan@ctan.org for a list). % The texinfo.tex in the texinfo distribution itself could well be out % of date, so if that's what you're using, please check. % @@ -40,7 +44,7 @@ % % To process a Texinfo manual with TeX, it's most reliable to use the % texi2dvi shell script that comes with the distribution. For simple -% manuals, you can get away with: +% manuals, however, you can get away with: % tex foo.texi % texindex foo.?? % tex foo.texi @@ -50,21 +54,12 @@ % Sometimes one run after texindex suffices, and sometimes you need more % than two; texi2dvi does it as many times as necessary. - -% Make it possible to create a .fmt file just by loading this file: -% if the underlying format is not loaded, start by loading it now. -% Added by gildea November 1993. -\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi - -% This automatically updates the version number based on RCS. -\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 2.253 $ -\message{Loading texinfo package [Version \texinfoversion]:} +\message{Loading texinfo [version \texinfoversion]:} % If in a .fmt file, print the version number % and turn on active characters that we couldn't do earlier because % they might have appeared in the input file name. -\everyjob{\message{[Texinfo version \texinfoversion]}\message{} +\everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} % Save some parts of plain tex whose names we will redefine. @@ -192,13 +187,16 @@ \shipout\vbox{% \ifcropmarks \vbox to \outervsize\bgroup \hsize = \outerhsize - \line{\ewtop\hfil\ewtop}% - \nointerlineskip - \line{% - \vbox{\moveleft\cornerthick\nstop}% - \hfill - \vbox{\moveright\cornerthick\nstop}% - }% + \vskip-\topandbottommargin + \vtop to0pt{% + \line{\ewtop\hfil\ewtop}% + \nointerlineskip + \line{% + \vbox{\moveleft\cornerthick\nstop}% + \hfill + \vbox{\moveright\cornerthick\nstop}% + }% + \vss}% \vskip\topandbottommargin \line\bgroup \hfil % center the page within the outer (page) hsize. @@ -221,13 +219,15 @@ \hfil\egroup % end of (centering) \line\bgroup \vskip\topandbottommargin plus1fill minus1fill \boxmaxdepth = \cornerthick - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% + \vbox to0pt{\vss + \line{% + \vbox{\moveleft\cornerthick\nsbot}% + \hfill + \vbox{\moveright\cornerthick\nsbot}% + }% + \nointerlineskip + \line{\ewbot\hfil\ewbot}% }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox @@ -343,11 +343,11 @@ %% Call \inENV within environments (after a \begingroup) \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} \def\ENVcheck{% -\ifENV\errmessage{Still within an environment. Type Return to continue.} +\ifENV\errmessage{Still within an environment; press RETURN to continue} \endgroup\fi} % This is not perfect, but it should reduce lossage % @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Type to continue.} +\newhelp\EMsimple{Press RETURN to continue.} \outer\def\begin{\parsearg\beginxxx} @@ -849,7 +849,7 @@ where each line of input produces a line of output.} \immediate\write16{If you are running another version of TeX, relax.} \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} \immediate\write16{If you are stuck with version 3.0, run the} \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} \immediate\write16{ to use a workaround.} @@ -959,9 +959,17 @@ where each line of input produces a line of output.} % @value{foo} gets the text saved in variable foo. % -\def\value{\begingroup - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \valuexxx} +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} +} \def\valuexxx#1{\expandablevalue{#1}\endgroup} % We have this subroutine so that we can handle at least some @value's @@ -975,7 +983,7 @@ where each line of input produces a line of output.} % \def\expandablevalue#1{% \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']v}% + {[No value for ``#1'']}% \else \csname SET#1\endcsname \fi @@ -1190,8 +1198,8 @@ where each line of input produces a line of output.} \setfont\ninett\ttshape{9}{1000} \setfont\ninettsl\ttslshape{10}{900} \setfont\indrm\rmshape{9}{1000} -\setfont\indit\slshape{9}{1000} -\let\indsl=\indit +\setfont\indit\itshape{9}{1000} +\setfont\indsl\slshape{9}{1000} \let\indtt=\ninett \let\indttsl=\ninettsl \let\indsf=\indrm @@ -1340,13 +1348,14 @@ where each line of input produces a line of output.} % \smartitalic{ARG} outputs arg in italics, followed by an italic correction % unless the following character is such as not to need one. \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx} +\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx} \let\i=\smartitalic -\let\var=\smartitalic -\let\dfn=\smartitalic +\let\var=\smartslanted +\let\dfn=\smartslanted \let\emph=\smartitalic -\let\cite=\smartitalic +\let\cite=\smartslanted \def\b#1{{\bf #1}} \let\strong=\b @@ -1413,20 +1422,18 @@ where each line of input produces a line of output.} % and arrange explicitly to hyphenate at a dash. % -- rms. { -\catcode`\-=\active -\catcode`\_=\active -\catcode`\|=\active -\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex} -% The following is used by \doprintindex to insure that long function names -% wrap around. It is necessary for - and _ to be active before the index is -% read from the file, as \entry parses the arguments long before \code is -% ever called. -- mycroft -% _ is always active; and it shouldn't be \let = to an _ that is a -% subscript character anyway. Then, @cindex @samp{_} (for example) -% fails. --karl -\global\def\indexbreaks{% - \catcode`\-=\active \let-\realdash -} + \catcode`\-=\active + \catcode`\_=\active + % + \global\def\code{\begingroup + \catcode`\-=\active \let-\codedash + \catcode`\_=\active \let_\codeunder + \codex + } + % + % If we end up with any active - characters when handling the index, + % just treat them as a normal -. + \global\def\indexbreaks{\catcode`\-=\active \let-\realdash} } \def\realdash{-} @@ -1834,15 +1841,13 @@ July\or August\or September\or October\or November\or December\fi \itemxneedsnegativevskipfalse \else % The item text fits into the space. Start a paragraph, so that the - % following text (if any) will end up on the same line. Since that - % text will be indented by \tableindent, we make the item text be in - % a zero-width box. + % following text (if any) will end up on the same line. \noindent % Do this with kerns and \unhbox so that if there is a footnote in % the item text, it can migrate to the main vertical list and % eventually be printed. \nobreak\kern-\tableindent - \dimen0 = \itemmax \advance\dimen0 by -\wd0 + \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 \unhbox0 \nobreak\kern\dimen0 \endgroup @@ -2406,6 +2411,11 @@ width0pt\relax} \fi \def\copyright{\realbackslash copyright}% \def\tclose##1{\realbackslash tclose {##1}}% \def\code##1{\realbackslash code {##1}}% +\def\uref##1{\realbackslash uref {##1}}% +\def\url##1{\realbackslash url {##1}}% +\def\env##1{\realbackslash env {##1}}% +\def\command##1{\realbackslash command {##1}}% +\def\option##1{\realbackslash option {##1}}% \def\dotless##1{\realbackslash dotless {##1}}% \def\samp##1{\realbackslash samp {##1}}% \def\,##1{\realbackslash ,{##1}}% @@ -2421,6 +2431,7 @@ width0pt\relax} \fi \def\kbd##1{\realbackslash kbd {##1}}% \def\dfn##1{\realbackslash dfn {##1}}% \def\emph##1{\realbackslash emph {##1}}% +\def\acronym##1{\realbackslash acronym {##1}}% % % Handle some cases of @value -- where the variable name does not % contain - or _, and the value does not contain any @@ -2484,6 +2495,11 @@ width0pt\relax} \fi %\let\tt=\indexdummyfont \let\tclose=\indexdummyfont \let\code=\indexdummyfont +\let\url=\indexdummyfont +\let\uref=\indexdummyfont +\let\env=\indexdummyfont +\let\command=\indexdummyfont +\let\option=\indexdummyfont \let\file=\indexdummyfont \let\samp=\indexdummyfont \let\kbd=\indexdummyfont @@ -3990,20 +4006,18 @@ width0pt\relax} \fi % outside the @def... \dimen2=\leftskip \advance\dimen2 by -\defbodyindent -\dimen3=\rightskip -\advance\dimen3 by -\defbodyindent -\noindent % +\noindent \setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line \dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 % +\parshape 2 0in \dimen0 \defargsindent \dimen1 % Now output arg 2 ("Function" or some such) % ending at \deftypemargin from the right margin, % but stuck inside a box of width 0 so it does not interfere with linebreaking {% Adjust \hsize to exclude the ambient margins, % so that \rightline will obey them. -\advance \hsize by -\dimen2 \advance \hsize by -\dimen3 -\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}% +\advance \hsize by -\dimen2 +\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}% % Make all lines underfull and no complaints: \tolerance=10000 \hbadness=10000 \advance\leftskip by -\defbodyindent @@ -4024,7 +4038,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % 61 is `=' @@ -4042,7 +4056,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}}} @@ -4060,7 +4074,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} @@ -4072,7 +4086,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\activeparens\spacesplit{#3{#5}}} @@ -4087,7 +4101,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2{\begingroup\obeylines\spacesplit#3}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup % \catcode 61=\active % @@ -4104,7 +4118,7 @@ width0pt\relax} \fi \def#1{\endgraf\endgroup\medbreak}% \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% \parindent=0in - \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent + \advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines } @@ -4149,7 +4163,7 @@ width0pt\relax} \fi \def#2##1 ##2 {\def#4{##1}% \begingroup\obeylines\spacesplit{#3{##2}}}% \parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent +\advance\leftskip by \defbodyindent \exdentamount=\defbodyindent \begingroup\obeylines\spacesplit{#3{#5}}} @@ -4511,6 +4525,17 @@ width0pt\relax} \fi \catcode`\^^M=12 \usembodybackslash} +\def\macroargctxt{% + \catcode`\~=12 + \catcode`\^=12 + \catcode`\_=12 + \catcode`\|=12 + \catcode`\<=12 + \catcode`\>=12 + \catcode`\+=12 + \catcode`\@=12 + \catcode`\\=12} + % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. @@ -4607,17 +4632,21 @@ width0pt\relax} \fi \noexpand\scanmacro{\temp}}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt \noexpand\braceorline\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \noexpand\scanmacro{\temp}}% + \egroup\noexpand\scanmacro{\temp}}% \else % many - \expandafter\xdef\csname\the\macname\endcsname##1{% + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname} + \expandafter\xdef\csname\the\macname xx\endcsname##1{% \csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname - \paramlist{\noexpand\scanmacro{\temp}}% + \paramlist{\egroup\noexpand\scanmacro{\temp}}% \fi \else \ifcase\paramno @@ -4627,18 +4656,24 @@ width0pt\relax} \fi \noexpand\scanmacro{\temp}\egroup}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt \noexpand\braceorline\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \else % many - \expandafter\xdef\csname\the\macname\endcsname##1{% + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname} + \expandafter\xdef\csname\the\macname xx\endcsname##1{% \csname\the\macname xxx\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter \csname\the\macname xxx\endcsname \paramlist{% + \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% \fi @@ -5184,7 +5219,7 @@ width0pt\relax} \fi \vsize = #1\relax \advance\vsize by \topskip \outervsize = \vsize - \advance\outervsize by 0.6in + \advance\outervsize by 2\topandbottommargin \pageheight = \vsize % \hsize = #2\relax @@ -5424,5 +5459,9 @@ width0pt\relax} \fi @rm @c Local variables: +@c eval: (add-hook 'write-file-hooks 'time-stamp) @c page-delimiter: "^\\\\message" +@c time-stamp-start: "def\\\\texinfoversion{" +@c time-stamp-format: "%:y-%02m-%02d" +@c time-stamp-end: "}" @c End: