From: Alexandre Duret-Lutz Date: Mon, 10 Jun 2002 17:44:06 +0000 (+0000) Subject: * lib/config.guess, lib/config.sub, lib/texinfo.tex, lib/INSTALL, X-Git-Tag: Release-1-6b~72 X-Git-Url: https://sourceware.org/git/?a=commitdiff_plain;h=17dd3562de1d10170c33065c686642ce6455a059;p=automake.git * lib/config.guess, lib/config.sub, lib/texinfo.tex, lib/INSTALL, INSTALL: New upstream versions. --- diff --git a/ChangeLog b/ChangeLog index 78a943f0..5ff8d446 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,8 @@ +2002-06-10 Alexandre Duret-Lutz + + * lib/config.guess, lib/config.sub, lib/texinfo.tex, lib/INSTALL, + INSTALL: New upstream versions. + 2002-06-10 Alexandre Duret-Lutz * tests/sinclude.test: Check for m4_include too. diff --git a/INSTALL b/INSTALL index 62ea076c..a4b34144 100644 --- a/INSTALL +++ b/INSTALL @@ -1,5 +1,5 @@ -Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation, -Inc. +Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. @@ -71,8 +71,9 @@ Compilers and Options the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. - You can give `configure' initial values for variables by setting -them in the environment. You can do that on the command line like this: + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix @@ -137,9 +138,10 @@ Specifying the System Type ========================== There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it cannot guess the host type, give it the +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -151,20 +153,16 @@ where SYSTEM can have one of these forms: See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't -need to know the host type. +need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the `--target=TYPE' option to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the host -platform (i.e., that on which the generated programs will eventually be -run) with `--host=TYPE'. In this case, you should also specify the -build platform with `--build=TYPE', because, in this case, it may not -be possible to guess the build platform (it sometimes involves -compiling and running simple test programs, and this can't be done if -the compiler is a cross compiler). +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. Sharing Defaults ================ diff --git a/lib/INSTALL b/lib/INSTALL index 62ea076c..a4b34144 100644 --- a/lib/INSTALL +++ b/lib/INSTALL @@ -1,5 +1,5 @@ -Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation, -Inc. +Copyright 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. @@ -71,8 +71,9 @@ Compilers and Options the `configure' script does not know about. Run `./configure --help' for details on some of the pertinent environment variables. - You can give `configure' initial values for variables by setting -them in the environment. You can do that on the command line like this: + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix @@ -137,9 +138,10 @@ Specifying the System Type ========================== There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it cannot guess the host type, give it the +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -151,20 +153,16 @@ where SYSTEM can have one of these forms: See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't -need to know the host type. +need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should use the `--target=TYPE' option to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the host -platform (i.e., that on which the generated programs will eventually be -run) with `--host=TYPE'. In this case, you should also specify the -build platform with `--build=TYPE', because, in this case, it may not -be possible to guess the build platform (it sometimes involves -compiling and running simple test programs, and this can't be done if -the compiler is a cross compiler). +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. Sharing Defaults ================ diff --git a/lib/config.guess b/lib/config.guess index ed2e03b7..fb9a2bad 100755 --- a/lib/config.guess +++ b/lib/config.guess @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002 Free Software Foundation, Inc. -timestamp='2002-03-20' +timestamp='2002-05-29' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -142,6 +142,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ /usr/sbin/$sysctl 2>/dev/null || echo unknown)` case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; @@ -428,6 +429,9 @@ EOF Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS) + echo powerpc-harris-powermax + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; @@ -917,13 +921,13 @@ EOF UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` - (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 - (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ && UNAME_MACHINE=i686 - (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else @@ -958,7 +962,7 @@ EOF exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` diff --git a/lib/config.sub b/lib/config.sub index f3657978..7f614e1c 100644 --- a/lib/config.sub +++ b/lib/config.sub @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002 Free Software Foundation, Inc. -timestamp='2002-03-07' +timestamp='2002-05-28' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -230,7 +230,7 @@ case $basic_machine in | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ - | d10v | d30v | dsp16xx \ + | d10v | d30v | dlx | dsp16xx \ | fr30 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ @@ -281,12 +281,12 @@ case $basic_machine in | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armv*-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c54x-* \ | clipper-* | cydra-* \ - | d10v-* | d30v-* \ + | d10v-* | d30v-* | dlx-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | fx80-* \ | h8300-* | h8500-* \ @@ -1090,7 +1090,7 @@ case $os in | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova*) + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1409,7 +1409,7 @@ case $basic_machine in -ptx*) vendor=sequent ;; - -vxsim* | -vxworks*) + -vxsim* | -vxworks* | -windiss*) vendor=wrs ;; -aux*) diff --git a/lib/texinfo.tex b/lib/texinfo.tex index df62a127..b0a1cfc3 100644 --- a/lib/texinfo.tex +++ b/lib/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2002-03-26.08} +\def\texinfoversion{2002-06-04.06} % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, % 2000, 01, 02 Free Software Foundation, Inc. @@ -4730,56 +4730,60 @@ width0pt\relax} \fi {\df #1}\enskip % Generate function name } -% Actually process the body of a definition -% #1 should be the terminating control sequence, such as \Edefun. -% #2 should be the "another name" control sequence, such as \defunx. -% #3 should be the control sequence that actually processes the header, -% such as \defunheader. - -\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % 61 is `=' -\obeylines\activeparens\spacesplit#3} - +% Common pieces to start any @def... % #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. +% #2 is the \...x control sequence (which our caller defines). +% #3 is the control sequence to process the header, such as \defunheader. +% +\def\parsebodycommon#1#2#3{% + \begingroup\inENV + % If there are two @def commands in a row, we'll have a \nobreak, + % which is there to keep the function description together with its + % header. But if there's nothing but headers, we want to allow a + % break after all. + \ifnum\lastpenalty = 10000 \penalty0 \fi + \medbreak + % + % Define the \E... end token that this defining construct specifies + % so that it will exit this group. + \def#1{\endgraf\endgroup\medbreak}% + % + \parindent=0in + \advance\leftskip by \defbodyindent + \exdentamount=\defbodyindent +} + +% Process body of @defun, @deffn, @defmac, etc. +% +\def\defparsebody#1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\begingroup\obeylines\activeparens\spacesplit#3}% + \catcode61=\active % 61 is `=' + \begingroup\obeylines\activeparens + \spacesplit#3% +} + +% #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by the space, is the class name. % -\def\defmethparsebody#1#2#3#4 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} +\def\defmethparsebody#1#2#3#4 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#4}}% +} % Used for @deftypemethod and @deftypeivar. -% #1 is the \E... control sequence to end the definition (which we define). -% #2 is the \...x control sequence for consecutive fns (which we define). -% #3 is the control sequence to call to resume processing. +% #1, #2, #3 are the common arguments (see \defparsebody). % #4, delimited by a space, is the class name. % #5 is the method's return type. % -\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV - \medbreak - \def#1{\endgraf\endgroup\medbreak}% +\def\deftypemethparsebody#1#2#3#4 #5 {% + \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}} + \begingroup\obeylines\activeparens + \spacesplit{#3{#4}{#5}}% +} % Used for @deftypeop. The change from \deftypemethparsebody is an % extra argument at the beginning which is the `category', instead of it @@ -4788,64 +4792,49 @@ width0pt\relax} \fi % input at hand. Thus also need a control sequence (passed as #5) for % the \E... definition to assign the category name to. % -\def\deftypeopparsebody#1#2#3#4#5 #6 {\begingroup\inENV - \medbreak - \def#1{\endgraf\endgroup\medbreak}% +\def\deftypeopparsebody#1#2#3#4#5 #6 {% + \parsebodycommon{#1}{#2}{#3}% \def#2##1 ##2 ##3 {% \def#4{##1}% \begingroup\obeylines\activeparens\spacesplit{#3{##2}{##3}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent - \begingroup\obeylines\activeparens\spacesplit{#3{#5}{#6}}} - -\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}{#6}}% +} + +% For @defop. +\def\defopparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% + \begingroup\obeylines\activeparens + \spacesplit{#3{#5}}% +} % These parsing functions are similar to the preceding ones % except that they do not make parens into active characters. % These are used for "variables" since they have no arguments. - -\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup % -\catcode 61=\active % -\obeylines\spacesplit#3} - -% This is used for \def{tp,vr}parsebody. It could probably be used for -% some of the others, too, with some judicious conditionals. % -\def\parsebodycommon#1#2#3{% - \begingroup\inENV % - \medbreak % - % Define the end token that this defining construct specifies - % so that it will exit this group. - \def#1{\endgraf\endgroup\medbreak}% - \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent +\def\defvarparsebody #1#2#3{% + \parsebodycommon{#1}{#2}{#3}% + \def#2{\begingroup\obeylines\spacesplit#3}% + \catcode61=\active % + \begingroup\obeylines + \spacesplit#3% +} + +% @defopvar. +\def\defopvarparsebody #1#2#3#4#5 {% + \parsebodycommon{#1}{#2}{#3}% + \def#2##1 ##2 {\def#4{##1}% + \begingroup\obeylines\spacesplit{#3{##2}}}% \begingroup\obeylines + \spacesplit{#3{#5}}% } \def\defvrparsebody#1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% + \begingroup\obeylines \spacesplit{#3{#4}}% } @@ -4860,6 +4849,8 @@ width0pt\relax} \fi % \def\deftpparsebody #1#2#3#4 {% \parsebodycommon{#1}{#2}{#3}% + \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}% + \begingroup\obeylines \spacesplit{\parsetpheaderline{#3{#4}}}\empty } @@ -4876,33 +4867,19 @@ width0pt\relax} \fi #1{\removeemptybraces#2\relax}{#3}% }% -\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent -\exdentamount=\defbodyindent -\begingroup\obeylines\spacesplit{#3{#5}}} - % Split up #2 at the first space token. % call #1 with two arguments: % the first is all of #2 before the space token, % the second is all of #2 after that space token. % If #2 contains no space token, all of it is passed as the first arg % and the second is passed as empty. - +% {\obeylines \gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% \long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% \ifx\relax #3% #1{#2}{}\else #1{#2}{#3#4}\fi}} -% So much for the things common to all kinds of definitions. - % Define @defun. % First, define the processing that is wanted for arguments of \defun