.SH "SYNOPSIS"
.sp
.nf
- ctime:string(epochsecs:long)
+1) ctime:string(epochsecs:long)
+.fi
+.sp
+.nf
+2) ctime:string()
.fi
.SH "ARGUMENTS"
.PP
.RE
.SH "DESCRIPTION"
.PP
-Takes an argument of seconds since the epoch as returned by
-\fBgettimeofday_s\fR\&. Returns a string of the form
+1) Takes an argument of seconds since the epoch as returned by\fBgettimeofday_s\fR\&. Returns a string of the form
.PP
+2)
\(lqWed Jun 30 21:49:08 1993\(rq
.PP
The string will always be exactly 24 characters\&. If the time would be unreasonable far in the past (before what can be represented with a 32 bit offset in seconds from the epoch) an error will occur (which can be avoided with try/catch)\&. If the time would be unreasonable far in the future, an error will also occur\&.
Note that the real C library
\fBctime\fR
function puts a newline (\*(Aq\en\*(Aq) character at the end of the string that this function does not\&. Also note that since the kernel has no concept of timezones, the returned time is always in GMT\&.
+.PP
+Without an argument, does the same as ctime(\fBgettimeofday_s\fR)\&.
.SH SEE ALSO\n
.IR tapset::ctime (3stap)
block device name
.RE
.PP
-\fIino\fR
+\fIphys_segments\fR
.RS 4
-i\-node number of the mapped file
+number of segments in this bio after physical address coalescing is performed\&.
.RE
.PP
-\fIhw_segments\fR
+\fIerror\fR
.RS 4
-number of segments after physical and DMA remapping hardware coalescing is performed
+0 on success
.RE
.PP
-\fIname\fR
+\fIsector\fR
.RS 4
-name of the probe point
+beginning sector for the entire bio
.RE
.PP
-\fIidx\fR
+\fIvcnt\fR
.RS 4
-offset into the bio vector array
+bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
.RE
.PP
-\fIerror\fR
+\fIname\fR
.RS 4
-0 on success
+name of the probe point
.RE
.PP
\fIflags\fR
see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
.RE
.PP
-\fIrw\fR
+\fIsize\fR
.RS 4
-binary trace for read/write request
+total size in bytes
.RE
.PP
-\fIphys_segments\fR
+\fIrw\fR
.RS 4
-number of segments in this bio after physical address coalescing is performed\&.
+binary trace for read/write request
.RE
.PP
-\fIvcnt\fR
+\fIidx\fR
.RS 4
-bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
+offset into the bio vector array
.RE
.PP
-\fIsector\fR
+\fIino\fR
.RS 4
-beginning sector for the entire bio
+i\-node number of the mapped file
.RE
.PP
-\fIsize\fR
+\fIbytes_done\fR
.RS 4
-total size in bytes
+number of bytes transferred
.RE
.PP
-\fIbytes_done\fR
+\fIhw_segments\fR
.RS 4
-number of bytes transferred
+number of segments after physical and DMA remapping hardware coalescing is performed
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIbdev\fR
-.RS 4
-target block device
-.RE
-.PP
-\fIdevname\fR
+\fIphys_segments\fR
.RS 4
-block device name
+number of segments in this bio after physical address coalescing is performed
.RE
.PP
-\fIino\fR
+\fIbdev_contains\fR
.RS 4
-i\-node number of the mapped file
+points to the device object which contains the partition (when bio structure represents a partition)
.RE
.PP
-\fIp_start_sect\fR
+\fIdevname\fR
.RS 4
-points to the start sector of the partition structure of the device
+block device name
.RE
.PP
\fIsize\fR
total size in bytes
.RE
.PP
-\fIphys_segments\fR
+\fIflags\fR
.RS 4
-number of segments in this bio after physical address coalescing is performed
+see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
.RE
.PP
-\fIrw\fR
+\fIsector\fR
.RS 4
-binary trace for read/write request
+beginning sector for the entire bio
.RE
.PP
-\fIsector\fR
+\fIp_start_sect\fR
.RS 4
-beginning sector for the entire bio
+points to the start sector of the partition structure of the device
.RE
.PP
\fIvcnt\fR
bio vector count which represents number of array element (page, offset, length) which make up this I/O request
.RE
.PP
-\fIhw_segments\fR
+\fIname\fR
.RS 4
-number of segments after physical and DMA remapping hardware coalescing is performed
+name of the probe point
.RE
.PP
-\fIbdev_contains\fR
+\fIrw\fR
.RS 4
-points to the device object which contains the partition (when bio structure represents a partition)
+binary trace for read/write request
.RE
.PP
-\fIflags\fR
+\fIidx\fR
.RS 4
-see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
+offset into the bio vector array
.RE
.PP
-\fIname\fR
+\fIino\fR
.RS 4
-name of the probe point
+i\-node number of the mapped file
.RE
.PP
-\fIidx\fR
+\fIbdev\fR
.RS 4
-offset into the bio vector array
+target block device
+.RE
+.PP
+\fIhw_segments\fR
+.RS 4
+number of segments after physical and DMA remapping hardware coalescing is performed
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIvcnt\fR
+\fIrw\fR
.RS 4
-bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
+binary trace for read/write request
.RE
.PP
-\fIsector\fR
+\fIidx\fR
.RS 4
-beginning sector for the entire bio
+offset into the bio vector array
+\fIphys_segments\fR
+\- number of segments in this bio after physical address coalescing is performed\&.
.RE
.PP
-\fIrw\fR
+\fIino\fR
.RS 4
-binary trace for read/write request
+i\-node number of the mapped file
.RE
.PP
-\fIsize\fR
+\fIq\fR
.RS 4
-total size in bytes
+request queue on which this bio was queued\&.
+.RE
+.PP
+\fIbdev\fR
+.RS 4
+target block device
.RE
.PP
\fIbytes_done\fR
number of bytes transferred
.RE
.PP
-\fIq\fR
+\fIbdev_contains\fR
.RS 4
-request queue on which this bio was queued\&.
+points to the device object which contains the partition (when bio structure represents a partition)
.RE
.PP
-\fIname\fR
+\fIdevname\fR
.RS 4
-name of the probe point
+device for which a buffer bounce was needed\&.
.RE
.PP
-\fIidx\fR
+\fIsize\fR
.RS 4
-offset into the bio vector array
-\fIphys_segments\fR
-\- number of segments in this bio after physical address coalescing is performed\&.
+total size in bytes
.RE
.PP
\fIflags\fR
see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
.RE
.PP
-\fIbdev_contains\fR
-.RS 4
-points to the device object which contains the partition (when bio structure represents a partition)
-.RE
-.PP
-\fIino\fR
+\fIsector\fR
.RS 4
-i\-node number of the mapped file
+beginning sector for the entire bio
.RE
.PP
-\fIbdev\fR
+\fIp_start_sect\fR
.RS 4
-target block device
+points to the start sector of the partition structure of the device
.RE
.PP
-\fIdevname\fR
+\fIname\fR
.RS 4
-device for which a buffer bounce was needed\&.
+name of the probe point
.RE
.PP
-\fIp_start_sect\fR
+\fIvcnt\fR
.RS 4
-points to the start sector of the partition structure of the device
+bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsector\fR
-.RS 4
-beginning sector for the entire bio
-.RE
-.PP
-\fIvcnt\fR
+\fIbdev_contains\fR
.RS 4
-bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
+points to the device object which contains the partition (when bio structure represents a partition)
.RE
.PP
-\fIrw\fR
+\fIdevname\fR
.RS 4
-binary trace for read/write request
+block device name
.RE
.PP
-\fIbytes_done\fR
+\fIflags\fR
.RS 4
-number of bytes transferred
+see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
.RE
.PP
\fIsize\fR
total size in bytes
.RE
.PP
-\fIq\fR
+\fIsector\fR
.RS 4
-request queue on which this bio was queued\&.
+beginning sector for the entire bio
.RE
.PP
-\fIidx\fR
+\fIp_start_sect\fR
.RS 4
-offset into the bio vector array
-\fIphys_segments\fR
-\- number of segments in this bio after physical address coalescing is performed\&.
+points to the start sector of the partition structure of the device
.RE
.PP
\fIname\fR
name of the probe point
.RE
.PP
-\fIflags\fR
+\fIvcnt\fR
.RS 4
-see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
+bio vector count which represents number of array element (page, offset, length) which makes up this I/O request
.RE
.PP
-\fIbdev_contains\fR
+\fIrw\fR
.RS 4
-points to the device object which contains the partition (when bio structure represents a partition)
+binary trace for read/write request
.RE
.PP
-\fIdevname\fR
+\fIidx\fR
.RS 4
-block device name
+offset into the bio vector array
+\fIphys_segments\fR
+\- number of segments in this bio after physical address coalescing is performed\&.
.RE
.PP
-\fIbdev\fR
+\fIino\fR
.RS 4
-target block device
+i\-node number of the mapped file
.RE
.PP
-\fIino\fR
+\fIq\fR
.RS 4
-i\-node number of the mapped file
+request queue on which this bio was queued\&.
.RE
.PP
-\fIp_start_sect\fR
+\fIbdev\fR
.RS 4
-points to the start sector of the partition structure of the device
+target block device
+.RE
+.PP
+\fIbytes_done\fR
+.RS 4
+number of bytes transferred
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIbdev\fR
.RS 4
-name of the probe point
+target block device
.RE
.PP
-\fIidx\fR
+\fIbytes_done\fR
.RS 4
-offset into the bio vector array
-\fIphys_segments\fR
-\- number of segments in this bio after physical address coalescing is performed\&.
+number of bytes transferred
.RE
.PP
-\fIflags\fR
+\fIino\fR
.RS 4
-see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
+i\-node number of the mapped file
.RE
.PP
-\fIbdev_contains\fR
+\fIidx\fR
.RS 4
-points to the device object which contains the partition (when bio structure represents a partition)
+offset into the bio vector array
+\fIphys_segments\fR
+\- number of segments in this bio after physical address coalescing is performed\&.
.RE
.PP
\fIrw\fR
binary trace for read/write request
.RE
.PP
-\fIvcnt\fR
-.RS 4
-bio vector count which represents number of array element (page, offset, length) which make up this I/O request
-.RE
-.PP
-\fIsector\fR
+\fIq\fR
.RS 4
-beginning sector for the entire bio
+request queue on which this bio was queued\&.
.RE
.PP
-\fIbytes_done\fR
+\fIflags\fR
.RS 4
-number of bytes transferred
+see below BIO_UPTODATE 0 ok after I/O completion BIO_RW_BLOCK 1 RW_AHEAD set, and read/write would block BIO_EOF 2 out\-out\-bounds error BIO_SEG_VALID 3 nr_hw_seg valid BIO_CLONED 4 doesn\*(Aqt own data BIO_BOUNCED 5 bio is a bounce bio BIO_USER_MAPPED 6 contains user pages BIO_EOPNOTSUPP 7 not supported
.RE
.PP
\fIsize\fR
total size in bytes
.RE
.PP
-\fIq\fR
+\fIp_start_sect\fR
.RS 4
-request queue on which this bio was queued\&.
+points to the start sector of the partition structure of the device
.RE
.PP
-\fIp_start_sect\fR
+\fIname\fR
.RS 4
-points to the start sector of the partition structure of the device
+name of the probe point
.RE
.PP
-\fIino\fR
+\fIvcnt\fR
.RS 4
-i\-node number of the mapped file
+bio vector count which represents number of array element (page, offset, length) which make up this I/O request
.RE
.PP
-\fIbdev\fR
+\fIsector\fR
.RS 4
-target block device
+beginning sector for the entire bio
.RE
.PP
\fIdevname\fR
.RS 4
block device name
.RE
+.PP
+\fIbdev_contains\fR
+.RS 4
+points to the device object which contains the partition (when bio structure represents a partition)
+.RE
.SH "CONTEXT"
.PP
The process makes block I/O request
.fi
.SH "VALUES"
.PP
-\fIrq_flags\fR
-.RS 4
-Request flags\&.
-.RE
-.PP
\fIdisk_minor\fR
.RS 4
Disk minor number of request\&.
.RE
.PP
-\fIelevator_name\fR
+\fIdisk_major\fR
.RS 4
-The type of I/O elevator currently enabled\&.
+Disk major no of request\&.
.RE
.PP
-\fIrq\fR
+\fIrq_flags\fR
.RS 4
-Address of request\&.
+Request flags\&.
.RE
.PP
\fIq\fR
Pointer to request queue\&.
.RE
.PP
-\fIdisk_major\fR
+\fIelevator_name\fR
.RS 4
-Disk major no of request\&.
+The type of I/O elevator currently enabled\&.
+.RE
+.PP
+\fIrq\fR
+.RS 4
+Address of request\&.
.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIrq_flags\fR
-.RS 4
-Request flags
-.RE
-.PP
-\fIdisk_minor\fR
+\fIq\fR
.RS 4
-Disk minor number of the request
+pointer to request queue
.RE
.PP
\fIelevator_name\fR
The type of I/O elevator currently enabled
.RE
.PP
-\fIrq\fR
+\fIrq_flags\fR
.RS 4
-Address of the request
+Request flags
.RE
.PP
-\fIq\fR
+\fIdisk_major\fR
.RS 4
-pointer to request queue
+Disk major number of the request
.RE
.PP
-\fIdisk_major\fR
+\fIdisk_minor\fR
.RS 4
-Disk major number of the request
+Disk minor number of the request
.RE
.PP
\fIname\fR
.RS 4
Name of the probe point
.RE
+.PP
+\fIrq\fR
+.RS 4
+Address of the request
+.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIdisk_minor\fR
.RS 4
-Name of the probe point
+Disk minor number of request\&.
.RE
.PP
\fIdisk_major\fR
Disk major no of request\&.
.RE
.PP
-\fIq\fR
+\fIrq_flags\fR
.RS 4
-Pointer to request queue\&.
+Request flags\&.
.RE
.PP
-\fIrq\fR
+\fIq\fR
.RS 4
-Address of request\&.
+Pointer to request queue\&.
.RE
.PP
\fIelevator_name\fR
The type of I/O elevator currently enabled\&.
.RE
.PP
-\fIdisk_minor\fR
+\fIrq\fR
.RS 4
-Disk minor number of request\&.
+Address of request\&.
.RE
.PP
-\fIrq_flags\fR
+\fIname\fR
.RS 4
-Request flags\&.
+Name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
.fi
.SH "VALUES"
.PP
+\fIrq\fR
+.RS 4
+Address of the request
+.RE
+.PP
\fIname\fR
.RS 4
Name of the probe point
.RE
.PP
-\fIdisk_major\fR
+\fIdisk_minor\fR
.RS 4
-Disk major number of the request
+Disk minor number of the request
.RE
.PP
-\fIrq\fR
+\fIdisk_major\fR
.RS 4
-Address of the request
+Disk major number of the request
.RE
.PP
\fIelevator_name\fR
The type of I/O elevator currently enabled
.RE
.PP
-\fIdisk_minor\fR
-.RS 4
-Disk minor number of the request
-.RE
-.PP
\fIrq_flags\fR
.RS 4
Request flags
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIelevator_name\fR
.RS 4
-Name of the probe point
+The type of I/O elevator currently enabled
.RE
.PP
-\fIelevator_name\fR
+\fIname\fR
.RS 4
-The type of I/O elevator currently enabled
+Name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIdisk_major\fR
-.RS 4
-Disk major number of the request
-.RE
-.PP
-\fIname\fR
+\fIrq_flags\fR
.RS 4
-Name of the probe point
+Request flags
.RE
.PP
-\fIrq_flags\fR
+\fIdisk_major\fR
.RS 4
-Request flags
+Disk major number of the request
.RE
.PP
\fIdisk_minor\fR
.RS 4
Address of the request
.RE
+.PP
+\fIname\fR
+.RS 4
+Name of the probe point
+.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
Name of the probe point
.RE
.PP
-\fIdisk_major\fR
+\fIrq\fR
.RS 4
-Disk major no of request\&.
+Address of request\&.
.RE
.PP
-\fIrq_flags\fR
+\fIelevator_name\fR
.RS 4
-Request flags\&.
+The type of I/O elevator currently enabled\&.
.RE
.PP
-\fIdisk_minor\fR
+\fIrq_flags\fR
.RS 4
-Disk minor number of request\&.
+Request flags\&.
.RE
.PP
-\fIelevator_name\fR
+\fIdisk_major\fR
.RS 4
-The type of I/O elevator currently enabled\&.
+Disk major no of request\&.
.RE
.PP
-\fIrq\fR
+\fIdisk_minor\fR
.RS 4
-Address of request\&.
+Disk minor number of request\&.
.RE
.SH SEE ALSO\n
.IR tapset::ioscheduler (3stap)
.fi
.SH "VALUES"
.PP
+\fIdisk_minor\fR
+.RS 4
+Disk minor number of request\&.
+.RE
+.PP
\fIdisk_major\fR
.RS 4
Disk major no of request\&.
.RE
.PP
-\fIname\fR
+\fIrq_flags\fR
.RS 4
-Name of the probe point
+Request flags\&.
.RE
.PP
\fIelevator_name\fR
The type of I/O elevator currently enabled\&.
.RE
.PP
-\fIrq\fR
-.RS 4
-Address of request\&.
-.RE
-.PP
-\fIdisk_minor\fR
+\fIname\fR
.RS 4
-Disk minor number of request\&.
+Name of the probe point
.RE
.PP
-\fIrq_flags\fR
+\fIrq\fR
.RS 4
-Request flags\&.
+Address of request\&.
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
+\fIrq\fR
+.RS 4
+Address of request\&.
+.RE
+.PP
\fIname\fR
.RS 4
Name of the probe point
.RE
.PP
-\fIdisk_major\fR
+\fIelevator_name\fR
.RS 4
-Disk major no of request\&.
+The type of I/O elevator currently enabled\&.
.RE
.PP
-\fIrq\fR
+\fIrq_flags\fR
.RS 4
-Address of request\&.
+Request flags\&.
.RE
.PP
-\fIelevator_name\fR
+\fIdisk_major\fR
.RS 4
-The type of I/O elevator currently enabled\&.
+Disk major no of request\&.
.RE
.PP
\fIdisk_minor\fR
.RS 4
Disk minor number of request\&.
.RE
-.PP
-\fIrq_flags\fR
-.RS 4
-Request flags\&.
-.RE
.SH "DESCRIPTION"
.PP
scheduled\&.
.fi
.SH "VALUES"
.PP
-\fIdisk_major\fR
+\fIelevator_name\fR
.RS 4
-Disk major no of request\&.
+The type of I/O elevator currently enabled\&.
.RE
.PP
-\fIname\fR
+\fIrq_flags\fR
.RS 4
-Name of the probe point
+Request flags\&.
.RE
.PP
-\fIelevator_name\fR
+\fIdisk_major\fR
.RS 4
-The type of I/O elevator currently enabled\&.
+Disk major no of request\&.
.RE
.PP
-\fIrq\fR
+\fIdisk_minor\fR
.RS 4
-Address of request\&.
+Disk minor number of request\&.
.RE
.PP
-\fIdisk_minor\fR
+\fIrq\fR
.RS 4
-Disk minor number of request\&.
+Address of request\&.
.RE
.PP
-\fIrq_flags\fR
+\fIname\fR
.RS 4
-Request flags\&.
+Name of the probe point
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIrq_queue\fR
+\fIname\fR
.RS 4
-request queue
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIrq_queue\fR
.RS 4
-Name of the probe point
+request queue
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIrq_queue\fR
.RS 4
-Name of the probe point
+request queue
.RE
.PP
-\fIrq_queue\fR
+\fIname\fR
.RS 4
-request queue
+Name of the probe point
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIskb\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sk_buff being acted on
.RE
.PP
-\fIskb\fR
+\fIop\fR
.RS 4
-pointer to the struct sk_buff being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIskb\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sk_buff being acted on
.RE
.PP
-\fIskb\fR
+\fIop\fR
.RS 4
-pointer to the struct sk_buff being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIskb\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sk_buff being acted on
.RE
.PP
-\fIskb\fR
+\fIop\fR
.RS 4
-pointer to the struct sk_buff being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIskb\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sk_buff being acted on
.RE
.PP
-\fIskb\fR
+\fIop\fR
.RS 4
-pointer to the struct sk_buff being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIskb\fR
+\fIop\fR
.RS 4
-pointer to the struct sk_buff being acted on
+value to be added to the counter (default value of 1)
.RE
.PP
-\fIop\fR
+\fIskb\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sk_buff being acted on
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIdir\fR
+\fIflags\fR
.RS 4
-pointer to the proc/irq/NN/name entry
+Flags for IRQ handler
.RE
.PP
\fIdev_id\fR
Cookie to identify device
.RE
.PP
-\fInext_irqaction\fR
+\fIthread_flags\fR
.RS 4
-pointer to next irqaction for shared interrupts
+Flags related to thread
.RE
.PP
-\fIirq\fR
+\fIdir\fR
.RS 4
-irq number
+pointer to the proc/irq/NN/name entry
.RE
.PP
\fIhandler\fR
interrupt handler function
.RE
.PP
-\fIthread\fR
+\fIaction\fR
.RS 4
-thread pointer for threaded interrupts
+struct irqaction* for this interrupt num
.RE
.PP
\fIthread_fn\fR
interrupt handler function for threaded interrupts
.RE
.PP
+\fInext_irqaction\fR
+.RS 4
+pointer to next irqaction for shared interrupts
+.RE
+.PP
\fIdev_name\fR
.RS 4
name of device
symbolic string representation of IRQ flags
.RE
.PP
-\fIflags\fR
-.RS 4
-Flags for IRQ handler
-.RE
-.PP
-\fIthread_flags\fR
+\fIirq\fR
.RS 4
-Flags related to thread
+irq number
.RE
.PP
-\fIaction\fR
+\fIthread\fR
.RS 4
-struct irqaction* for this interrupt num
+thread pointer for threaded interrupts
.RE
.SH SEE ALSO\n
.IR tapset::irq (3stap)
.fi
.SH "VALUES"
.PP
-\fIhandler\fR
+\fIthread\fR
.RS 4
-interrupt handler function that was executed
+thread pointer for threaded interrupts
.RE
.PP
-\fIdev_name\fR
+\fIflags_str\fR
.RS 4
-name of device
+symbolic string representation of IRQ flags
.RE
.PP
-\fIthread_fn\fR
+\fIret\fR
.RS 4
-interrupt handler function for threaded interrupts
+return value of the handler
.RE
.PP
-\fIthread\fR
+\fIirq\fR
.RS 4
-thread pointer for threaded interrupts
+interrupt number
.RE
.PP
-\fIdir\fR
+\fIdev_name\fR
.RS 4
-pointer to the proc/irq/NN/name entry
+name of device
.RE
.PP
\fInext_irqaction\fR
pointer to next irqaction for shared interrupts
.RE
.PP
-\fIirq\fR
+\fIthread_fn\fR
.RS 4
-interrupt number
+interrupt handler function for threaded interrupts
.RE
.PP
-\fIdev_id\fR
+\fIhandler\fR
.RS 4
-Cookie to identify device
+interrupt handler function that was executed
.RE
.PP
\fIaction\fR
struct irqaction*
.RE
.PP
-\fIflags\fR
+\fIdir\fR
.RS 4
-flags for IRQ handler
+pointer to the proc/irq/NN/name entry
.RE
.PP
-\fIflags_str\fR
+\fIthread_flags\fR
.RS 4
-symbolic string representation of IRQ flags
+Flags related to thread
.RE
.PP
-\fIret\fR
+\fIdev_id\fR
.RS 4
-return value of the handler
+Cookie to identify device
.RE
.PP
-\fIthread_flags\fR
+\fIflags\fR
.RS 4
-Flags related to thread
+flags for IRQ handler
.RE
.SH SEE ALSO\n
.IR tapset::irq (3stap)
None
.SH "CONTEXT"
.PP
-This probe fires when the JSON data is about to be read\&. This probe must gather up data and then call the following macros to output the data in JSON format\&. First,
-\fIjson_output_data_start\fR() must be called\&. That call is followed by one or more of the following (one call for each data item):
-\fIjson_output_string_value\fR(),
-\fIjson_output_numeric_value\fR(),
-\fIjson_output_array_string_value\fR(), and
-\fIjson_output_array_numeric_value\fR()\&. Finally
-\fIjson_output_data_end\fR() must be called\&.
+This probe fires when the JSON data is about to be read\&. This probe must gather up data and then call the following macros to output the data in JSON format\&. First, @\fBjson_output_data_start\fR
+must be called\&. That call is followed by one or more of the following (one call for each data item): @\fBjson_output_string_value\fR, @\fBjson_output_numeric_value\fR, @\fBjson_output_array_string_value\fR, and @\fBjson_output_array_numeric_value\fR\&. Finally @\fBjson_output_data_end\fR
+must be called\&.
.SH SEE ALSO\n
.IR tapset::json (3stap)
.fi
.SH "VALUES"
.PP
-\fIargstr\fR
+\fIargs\fR
.RS 4
-A string containing the filename followed by the arguments to pass, excluding 0th arg (SystemTap v2\&.5+)
+The arguments to pass to the new executable, including the 0th arg (SystemTap v2\&.5+)
.RE
.PP
-\fIfilename\fR
+\fIname\fR
.RS 4
-The path to the new executable
+Name of the system call (\(lqexecve\(rq) (SystemTap v2\&.5+)
.RE
.PP
-\fIargs\fR
+\fIargstr\fR
.RS 4
-The arguments to pass to the new executable, including the 0th arg (SystemTap v2\&.5+)
+A string containing the filename followed by the arguments to pass, excluding 0th arg (SystemTap v2\&.5+)
.RE
.PP
-\fIname\fR
+\fIfilename\fR
.RS 4
-Name of the system call (\(lqexecve\(rq) (SystemTap v2\&.5+)
+The path to the new executable
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsuccess\fR
+\fIretstr\fR
.RS 4
-A boolean indicating whether the exec was successful
+A string representation of errno (SystemTap v2\&.5+)
.RE
.PP
-\fIerrno\fR
+\fIname\fR
.RS 4
-The error number resulting from the exec
+Name of the system call (\(lqexecve\(rq) (SystemTap v2\&.5+)
.RE
.PP
-\fIname\fR
+\fIerrno\fR
.RS 4
-Name of the system call (\(lqexecve\(rq) (SystemTap v2\&.5+)
+The error number resulting from the exec
.RE
.PP
-\fIretstr\fR
+\fIsuccess\fR
.RS 4
-A string representation of errno (SystemTap v2\&.5+)
+A boolean indicating whether the exec was successful
.RE
.SH "CONTEXT"
.PP
A task handle to the process being released
.RE
.PP
-\fIreleased_tid\fR
+\fIpid\fR
.RS 4
-TID of the task being released
+Same as
+\fIreleased_pid\fR
+for compatibility (deprecated)
.RE
.PP
\fIreleased_pid\fR
PID of the process being released
.RE
.PP
-\fIpid\fR
+\fIreleased_tid\fR
.RS 4
-Same as
-\fIreleased_pid\fR
-for compatibility (deprecated)
+TID of the task being released
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-Pointer to the struct sock being acted on
+Value to be added to the counter (default value of 1)
.RE
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-Value to be added to the counter (default value of 1)
+Pointer to the struct sock being acted on
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-Value to be added to the counter (default value of 1)
+Pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-Pointer to the struct sock being acted on
+Value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-Pointer to the struct sock being acted on
+Value to be added to the counter (default value of 1)
.RE
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-Value to be added to the counter (default value of 1)
+Pointer to the struct sock being acted on
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIdev_name\fR
+\fIold_mac\fR
.RS 4
-The device that will have the MAC changed
+The current MAC address
.RE
.PP
-\fInew_mac\fR
+\fImac_len\fR
.RS 4
-The new MAC address
+The MAC length
.RE
.PP
-\fIold_mac\fR
+\fIdev_name\fR
.RS 4
-The current MAC address
+The device that will have the MAC changed
.RE
.PP
-\fImac_len\fR
+\fInew_mac\fR
.RS 4
-The MAC length
+The new MAC address
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fIold_mtu\fR
-.RS 4
-The current MTU
-.RE
-.PP
\fInew_mtu\fR
.RS 4
The new MTU
.RS 4
The device that will have the MTU changed
.RE
+.PP
+\fIold_mtu\fR
+.RS 4
+The current MTU
+.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fIdev_name\fR
+\fIflags\fR
.RS 4
-The device that will be changed
+The new flags
.RE
.PP
-\fIflags\fR
+\fIdev_name\fR
.RS 4
-The new flags
+The device that will be changed
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
Protocol of received packet\&.
.RE
.PP
-\fIdev_name\fR
+\fIlength\fR
.RS 4
-The name of the device\&. e\&.g: eth0, ath1\&.
+The length of the receiving buffer\&.
.RE
.PP
-\fIlength\fR
+\fIdev_name\fR
.RS 4
-The length of the receiving buffer\&.
+The name of the device\&. e\&.g: eth0, ath1\&.
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fIprotocol\fR
+\fIdev_name\fR
.RS 4
-The packet protocol
+The device received the packet
.RE
.PP
-\fIdev_name\fR
+\fIprotocol\fR
.RS 4
-The device received the packet
+The packet protocol
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fIdisable\fR
+\fIinc\fR
.RS 4
-If the device is leaving promiscuity mode
+Count the number of promiscuity openers
.RE
.PP
\fIdev_name\fR
The device that is entering/leaving promiscuity mode
.RE
.PP
-\fIinc\fR
+\fIenable\fR
.RS 4
-Count the number of promiscuity openers
+If the device is entering promiscuity mode
.RE
.PP
-\fIenable\fR
+\fIdisable\fR
.RS 4
-If the device is entering promiscuity mode
+If the device is leaving promiscuity mode
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fIdev_name\fR
+\fIprotocol\fR
.RS 4
-The name of the device\&. e\&.g: eth0, ath1\&.
+The protocol of this packet(defined in include/linux/if_ether\&.h)\&.
.RE
.PP
-\fIlength\fR
+\fItruesize\fR
.RS 4
-The length of the transmit buffer\&.
+The size of the data to be transmitted\&.
.RE
.PP
-\fIprotocol\fR
+\fIdev_name\fR
.RS 4
-The protocol of this packet(defined in include/linux/if_ether\&.h)\&.
+The name of the device\&. e\&.g: eth0, ath1\&.
.RE
.PP
-\fItruesize\fR
+\fIlength\fR
.RS 4
-The size of the data to be transmitted\&.
+The length of the transmit buffer\&.
.RE
.SH SEE ALSO\n
.IR tapset::networking (3stap)
.fi
.SH "VALUES"
.PP
-\fInf_stop\fR
+\fIlength\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIar_hrd\fR
+\fInf_repeat\fR
.RS 4
-Format of hardware address
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIoutdev_name\fR
+\fIar_hln\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Length of hardware address
.RE
.PP
-\fIar_pro\fR
+\fInf_stolen\fR
.RS 4
-Format of protocol address
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIoutdev\fR
+\fIar_data\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Address of ARP packet data region (after the header)
.RE
.PP
-\fIpf\fR
+\fInf_drop\fR
.RS 4
-Protocol family \-\- always
-\(lqarp\(rq
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIarphdr\fR
+\fIindev_name\fR
.RS 4
-Address of ARP header
+Name of network device packet was received on (if known)
.RE
.PP
-\fIar_tha\fR
+\fIar_sip\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
+Ethernet+IP only (ar_pro==0x800): source IP address
.RE
.PP
-\fIar_hln\fR
+\fIarphdr\fR
.RS 4
-Length of hardware address
+Address of ARP header
.RE
.PP
-\fIindev\fR
+\fIar_op\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+ARP opcode (command)
.RE
.PP
-\fInf_drop\fR
+\fIar_tip\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Ethernet+IP only (ar_pro==0x800): target IP address
.RE
.PP
-\fIar_op\fR
+\fInf_queue\fR
.RS 4
-ARP opcode (command)
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIindev_name\fR
+\fIpf\fR
.RS 4
-Name of network device packet was received on (if known)
+Protocol family \-\- always
+\(lqarp\(rq
.RE
.PP
-\fInf_accept\fR
+\fIar_tha\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
.RE
.PP
-\fIar_pln\fR
+\fIar_pro\fR
.RS 4
-Length of protocol address
+Format of protocol address
.RE
.PP
-\fInf_queue\fR
+\fIoutdev_name\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIlength\fR
+\fIindev\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIar_data\fR
+\fIar_sha\fR
.RS 4
-Address of ARP packet data region (after the header)
+Ethernet+IP only (ar_pro==0x800): source hardware (MAC) address
.RE
.PP
-\fIar_tip\fR
+\fIar_pln\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target IP address
+Length of protocol address
.RE
.PP
-\fInf_repeat\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIar_sip\fR
+\fInf_stop\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): source IP address
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fInf_stolen\fR
+\fIar_hrd\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Format of hardware address
.RE
.PP
-\fIar_sha\fR
+\fInf_accept\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): source hardware (MAC) address
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIarphdr\fR
+\fIar_hrd\fR
.RS 4
-Address of ARP header
+Format of hardware address
.RE
.PP
-\fIpf\fR
+\fIoutdev\fR
.RS 4
-Protocol family \-\- always
-\(lqarp\(rq
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIar_pro\fR
+\fInf_stop\fR
.RS 4
-Format of protocol address
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIoutdev\fR
+\fInf_accept\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIar_hrd\fR
+\fIar_pro\fR
.RS 4
-Format of hardware address
+Format of protocol address
.RE
.PP
\fIoutdev_name\fR
Name of network device packet will be routed to (if known)
.RE
.PP
-\fInf_stop\fR
-.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
-.RE
-.PP
-\fIar_sip\fR
+\fIar_tha\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): source IP address
+Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
.RE
.PP
-\fInf_stolen\fR
+\fIpf\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Protocol family \-\- always
+\(lqarp\(rq
.RE
.PP
\fIar_sha\fR
Ethernet+IP only (ar_pro==0x800): source hardware (MAC) address
.RE
.PP
-\fIar_data\fR
+\fIindev\fR
.RS 4
-Address of ARP packet data region (after the header)
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIar_tip\fR
+\fIar_pln\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target IP address
+Length of protocol address
.RE
.PP
-\fInf_repeat\fR
+\fInf_queue\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIindev_name\fR
+\fIar_tip\fR
.RS 4
-Name of network device packet was received on (if known)
+Ethernet+IP only (ar_pro==0x800): target IP address
.RE
.PP
-\fInf_accept\fR
+\fIar_hln\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Length of hardware address
.RE
.PP
-\fIar_pln\fR
+\fIar_data\fR
.RS 4
-Length of protocol address
+Address of ARP packet data region (after the header)
.RE
.PP
-\fInf_queue\fR
+\fInf_stolen\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
\fIlength\fR
The length of the packet buffer contents, in bytes
.RE
.PP
-\fIar_tha\fR
+\fInf_repeat\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIar_hln\fR
+\fIarphdr\fR
.RS 4
-Length of hardware address
+Address of ARP header
.RE
.PP
-\fIindev\fR
+\fIar_op\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+ARP opcode (command)
.RE
.PP
\fInf_drop\fR
Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIar_op\fR
+\fIar_sip\fR
.RS 4
-ARP opcode (command)
+Ethernet+IP only (ar_pro==0x800): source IP address
+.RE
+.PP
+\fIindev_name\fR
+.RS 4
+Name of network device packet was received on (if known)
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fInf_stop\fR
+\fInf_queue\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIoutdev_name\fR
+\fIar_tip\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Ethernet+IP only (ar_pro==0x800): target IP address
.RE
.PP
-\fIar_hrd\fR
+\fInf_stolen\fR
.RS 4
-Format of hardware address
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIoutdev\fR
+\fIar_data\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Address of ARP packet data region (after the header)
.RE
.PP
-\fIar_pro\fR
+\fIar_hln\fR
.RS 4
-Format of protocol address
+Length of hardware address
.RE
.PP
-\fIarphdr\fR
+\fInf_repeat\fR
.RS 4
-Address of ARP header
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIpf\fR
+\fIlength\fR
.RS 4
-Protocol family \-\- always
-\(lqarp\(rq
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIar_hln\fR
+\fIar_op\fR
.RS 4
-Length of hardware address
+ARP opcode (command)
.RE
.PP
-\fIindev\fR
+\fIarphdr\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Address of ARP header
.RE
.PP
-\fInf_drop\fR
+\fIindev_name\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Name of network device packet was received on (if known)
.RE
.PP
-\fIar_op\fR
+\fIar_sip\fR
.RS 4
-ARP opcode (command)
+Ethernet+IP only (ar_pro==0x800): source IP address
.RE
.PP
-\fIar_tha\fR
+\fInf_drop\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIar_pln\fR
+\fIar_hrd\fR
.RS 4
-Length of protocol address
+Format of hardware address
.RE
.PP
-\fInf_queue\fR
+\fInf_stop\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIlength\fR
+\fIoutdev\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIindev_name\fR
+\fInf_accept\fR
.RS 4
-Name of network device packet was received on (if known)
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fInf_accept\fR
+\fIoutdev_name\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIar_tip\fR
+\fIar_pro\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): target IP address
+Format of protocol address
.RE
.PP
-\fIar_data\fR
+\fIar_tha\fR
.RS 4
-Address of ARP packet data region (after the header)
+Ethernet+IP only (ar_pro==0x800): target hardware (MAC) address
.RE
.PP
-\fInf_repeat\fR
+\fIpf\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Protocol family \-\- always
+\(lqarp\(rq
.RE
.PP
-\fIar_sha\fR
+\fIar_pln\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): source hardware (MAC) address
+Length of protocol address
.RE
.PP
-\fIar_sip\fR
+\fIindev\fR
.RS 4
-Ethernet+IP only (ar_pro==0x800): source IP address
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fInf_stolen\fR
+\fIar_sha\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Ethernet+IP only (ar_pro==0x800): source hardware (MAC) address
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIbrhdr\fR
+\fIindev_name\fR
.RS 4
-Address of bridge header
+Name of network device packet was received on (if known)
.RE
.PP
-\fInf_stop\fR
+\fInf_drop\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIoutdev_name\fR
+\fIbr_rmac\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Root bridge MAC address
.RE
.PP
-\fIbr_bid\fR
+\fIprotocol\fR
.RS 4
-Identity of bridge
+Packet protocol
.RE
.PP
-\fIbr_prid\fR
+\fInf_repeat\fR
.RS 4
-Protocol identifier
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIprotocol\fR
+\fIlength\fR
.RS 4
-Packet protocol
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIoutdev\fR
+\fInf_stolen\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIpf\fR
+\fIbr_poid\fR
.RS 4
-Protocol family \-\- always
-\(lqbridge\(rq
+Port identifier
.RE
.PP
-\fIbr_htime\fR
+\fIbr_type\fR
.RS 4
-Hello time in 1/256 secs
+BPDU type
.RE
.PP
-\fIbr_vid\fR
+\fIbrhdr\fR
.RS 4
-Protocol version identifier
+Address of bridge header
.RE
.PP
-\fIindev\fR
+\fIbr_prid\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Protocol identifier
.RE
.PP
-\fInf_drop\fR
+\fIbr_msg\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Message age in 1/256 secs
.RE
.PP
-\fIbr_rid\fR
+\fIbr_vid\fR
.RS 4
-Identity of root bridge
+Protocol version identifier
.RE
.PP
-\fIbr_poid\fR
+\fIbr_fd\fR
.RS 4
-Port identifier
+Forward delay in 1/256 secs
.RE
.PP
-\fIllcproto_stp\fR
+\fIbr_mac\fR
.RS 4
-Constant used to signify Bridge Spanning Tree Protocol packet
+Bridge MAC address
.RE
.PP
-\fIbr_fd\fR
+\fIbr_flags\fR
.RS 4
-Forward delay in 1/256 secs
+BPDU flags
.RE
.PP
\fInf_queue\fR
Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIlength\fR
-.RS 4
-The length of the packet buffer contents, in bytes
-.RE
-.PP
-\fIbr_flags\fR
+\fIbr_htime\fR
.RS 4
-BPDU flags
+Hello time in 1/256 secs
.RE
.PP
-\fIbr_mac\fR
+\fIindev\fR
.RS 4
-Bridge MAC address
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIllcpdu\fR
+\fIpf\fR
.RS 4
-Address of LLC Protocol Data Unit
+Protocol family \-\- always
+\(lqbridge\(rq
.RE
.PP
-\fIindev_name\fR
+\fIllcproto_stp\fR
.RS 4
-Name of network device packet was received on (if known)
+Constant used to signify Bridge Spanning Tree Protocol packet
.RE
.PP
-\fInf_accept\fR
+\fIoutdev_name\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Name of network device packet will be routed to (if known)
.RE
.PP
\fIbr_cost\fR
Total cost from transmitting bridge to root
.RE
.PP
-\fIbr_msg\fR
+\fIllcpdu\fR
.RS 4
-Message age in 1/256 secs
+Address of LLC Protocol Data Unit
.RE
.PP
-\fInf_repeat\fR
+\fInf_accept\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIbr_type\fR
+\fIbr_bid\fR
.RS 4
-BPDU type
+Identity of bridge
.RE
.PP
-\fIbr_rmac\fR
+\fInf_stop\fR
.RS 4
-Root bridge MAC address
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
\fIbr_max\fR
Max age in 1/256 secs
.RE
.PP
-\fInf_stolen\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
+.RE
+.PP
+\fIbr_rid\fR
+.RS 4
+Identity of root bridge
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIoutdev\fR
+\fIbr_poid\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Port identifier
.RE
.PP
-\fIprotocol\fR
+\fInf_stolen\fR
.RS 4
-Packet protocol
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIpf\fR
+\fIbr_type\fR
.RS 4
-Protocol family \-\- always
-\(lqbridge\(rq
+BPDU type
.RE
.PP
-\fIbr_htime\fR
+\fIprotocol\fR
.RS 4
-Hello time in 1/256 secs
+Packet protocol
.RE
.PP
-\fIbr_vid\fR
+\fInf_repeat\fR
.RS 4
-Protocol version identifier
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fInf_stop\fR
+\fIlength\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIbrhdr\fR
+\fIbr_rmac\fR
.RS 4
-Address of bridge header
+Root bridge MAC address
.RE
.PP
-\fIoutdev_name\fR
+\fIindev_name\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Name of network device packet was received on (if known)
.RE
.PP
-\fIbr_prid\fR
+\fInf_drop\fR
.RS 4
-Protocol identifier
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIbr_bid\fR
+\fInf_queue\fR
.RS 4
-Identity of bridge
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fInf_repeat\fR
+\fIbr_flags\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+BPDU flags
.RE
.PP
-\fIbr_rmac\fR
+\fIbr_msg\fR
.RS 4
-Root bridge MAC address
+Message age in 1/256 secs
.RE
.PP
-\fIbr_type\fR
+\fIbr_mac\fR
.RS 4
-BPDU type
+Bridge MAC address
.RE
.PP
-\fIbr_max\fR
+\fIbr_fd\fR
.RS 4
-Max age in 1/256 secs
+Forward delay in 1/256 secs
.RE
.PP
-\fInf_stolen\fR
+\fIbr_vid\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Protocol version identifier
.RE
.PP
-\fIbr_rid\fR
+\fIbrhdr\fR
.RS 4
-Identity of root bridge
+Address of bridge header
.RE
.PP
-\fInf_drop\fR
+\fIbr_prid\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Protocol identifier
.RE
.PP
-\fIindev\fR
+\fIoutdev_name\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIllcproto_stp\fR
+\fIbr_cost\fR
.RS 4
-Constant used to signify Bridge Spanning Tree Protocol packet
+Total cost from transmitting bridge to root
.RE
.PP
-\fIbr_poid\fR
+\fIpf\fR
.RS 4
-Port identifier
+Protocol family \-\- always
+\(lqbridge\(rq
.RE
.PP
-\fIllcpdu\fR
+\fIllcproto_stp\fR
.RS 4
-Address of LLC Protocol Data Unit
+Constant used to signify Bridge Spanning Tree Protocol packet
.RE
.PP
-\fIbr_mac\fR
+\fIindev\fR
.RS 4
-Bridge MAC address
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIbr_fd\fR
+\fIbr_htime\fR
.RS 4
-Forward delay in 1/256 secs
+Hello time in 1/256 secs
.RE
.PP
-\fInf_queue\fR
+\fIbr_rid\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Identity of root bridge
.RE
.PP
-\fIlength\fR
+\fInf_stop\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIbr_flags\fR
+\fIbr_bid\fR
.RS 4
-BPDU flags
+Identity of bridge
.RE
.PP
-\fIbr_msg\fR
+\fIbr_max\fR
.RS 4
-Message age in 1/256 secs
+Max age in 1/256 secs
.RE
.PP
-\fInf_accept\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIindev_name\fR
+\fInf_accept\fR
.RS 4
-Name of network device packet was received on (if known)
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIbr_cost\fR
+\fIllcpdu\fR
.RS 4
-Total cost from transmitting bridge to root
+Address of LLC Protocol Data Unit
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIbr_prid\fR
+\fIbr_htime\fR
.RS 4
-Protocol identifier
+Hello time in 1/256 secs
.RE
.PP
-\fIbr_bid\fR
+\fIindev\fR
.RS 4
-Identity of bridge
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIoutdev_name\fR
+\fIllcproto_stp\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Constant used to signify Bridge Spanning Tree Protocol packet
.RE
.PP
-\fInf_stop\fR
+\fIpf\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Protocol family \-\- always
+\(lqbridge\(rq
.RE
.PP
-\fIbrhdr\fR
+\fIbr_cost\fR
.RS 4
-Address of bridge header
+Total cost from transmitting bridge to root
.RE
.PP
-\fIbr_vid\fR
+\fIoutdev_name\fR
.RS 4
-Protocol version identifier
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIbr_htime\fR
+\fIllcpdu\fR
.RS 4
-Hello time in 1/256 secs
+Address of LLC Protocol Data Unit
.RE
.PP
-\fIpf\fR
+\fInf_accept\fR
.RS 4
-Protocol family \-\- always
-\(lqbridge\(rq
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
\fIoutdev\fR
Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIprotocol\fR
+\fIbr_max\fR
.RS 4
-Packet protocol
+Max age in 1/256 secs
.RE
.PP
-\fIbr_msg\fR
+\fInf_stop\fR
.RS 4
-Message age in 1/256 secs
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fInf_accept\fR
+\fIbr_bid\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Identity of bridge
.RE
.PP
-\fIindev_name\fR
+\fIbr_rid\fR
.RS 4
-Name of network device packet was received on (if known)
+Identity of root bridge
.RE
.PP
-\fIbr_cost\fR
+\fInf_drop\fR
.RS 4
-Total cost from transmitting bridge to root
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIbr_mac\fR
+\fIindev_name\fR
.RS 4
-Bridge MAC address
+Name of network device packet was received on (if known)
.RE
.PP
-\fIllcpdu\fR
+\fIbr_rmac\fR
.RS 4
-Address of LLC Protocol Data Unit
+Root bridge MAC address
.RE
.PP
-\fIbr_flags\fR
+\fIlength\fR
.RS 4
-BPDU flags
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fInf_queue\fR
+\fIprotocol\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Packet protocol
.RE
.PP
-\fIlength\fR
+\fInf_repeat\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIbr_fd\fR
+\fIbr_type\fR
.RS 4
-Forward delay in 1/256 secs
+BPDU type
.RE
.PP
-\fIllcproto_stp\fR
+\fInf_stolen\fR
.RS 4
-Constant used to signify Bridge Spanning Tree Protocol packet
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
\fIbr_poid\fR
Port identifier
.RE
.PP
-\fIindev\fR
+\fIbr_prid\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Protocol identifier
.RE
.PP
-\fInf_drop\fR
+\fIbrhdr\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Address of bridge header
.RE
.PP
-\fIbr_rid\fR
+\fIbr_fd\fR
.RS 4
-Identity of root bridge
+Forward delay in 1/256 secs
.RE
.PP
-\fInf_stolen\fR
+\fIbr_vid\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Protocol version identifier
.RE
.PP
-\fIbr_max\fR
+\fIbr_mac\fR
.RS 4
-Max age in 1/256 secs
+Bridge MAC address
.RE
.PP
-\fInf_repeat\fR
+\fIbr_msg\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Message age in 1/256 secs
.RE
.PP
-\fIbr_rmac\fR
+\fIbr_flags\fR
.RS 4
-Root bridge MAC address
+BPDU flags
.RE
.PP
-\fIbr_type\fR
+\fInf_queue\fR
.RS 4
-BPDU type
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fInf_repeat\fR
+\fIbr_rmac\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Root bridge MAC address
.RE
.PP
-\fIbr_rmac\fR
+\fInf_drop\fR
.RS 4
-Root bridge MAC address
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIbr_type\fR
+\fIindev_name\fR
.RS 4
-BPDU type
+Name of network device packet was received on (if known)
.RE
.PP
-\fIbr_max\fR
+\fIbr_type\fR
.RS 4
-Max age in 1/256 secs
+BPDU type
.RE
.PP
\fInf_stolen\fR
Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fInf_drop\fR
+\fIbr_poid\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Port identifier
.RE
.PP
-\fIbr_rid\fR
+\fIlength\fR
.RS 4
-Identity of root bridge
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIindev\fR
+\fInf_repeat\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIbr_poid\fR
+\fIprotocol\fR
.RS 4
-Port identifier
+Packet protocol
.RE
.PP
-\fIllcproto_stp\fR
+\fIbr_fd\fR
.RS 4
-Constant used to signify Bridge Spanning Tree Protocol packet
+Forward delay in 1/256 secs
.RE
.PP
-\fIllcpdu\fR
+\fIbr_mac\fR
.RS 4
-Address of LLC Protocol Data Unit
+Bridge MAC address
.RE
.PP
-\fIbr_mac\fR
+\fIbr_vid\fR
.RS 4
-Bridge MAC address
+Protocol version identifier
.RE
.PP
-\fInf_queue\fR
+\fIbr_msg\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Message age in 1/256 secs
.RE
.PP
-\fIlength\fR
+\fIbr_prid\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Protocol identifier
.RE
.PP
-\fIbr_fd\fR
+\fIbrhdr\fR
.RS 4
-Forward delay in 1/256 secs
+Address of bridge header
.RE
.PP
-\fIbr_flags\fR
+\fInf_queue\fR
.RS 4
-BPDU flags
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIbr_msg\fR
+\fIbr_flags\fR
.RS 4
-Message age in 1/256 secs
+BPDU flags
.RE
.PP
-\fIindev_name\fR
+\fIindev\fR
.RS 4
-Name of network device packet was received on (if known)
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fInf_accept\fR
+\fIbr_htime\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Hello time in 1/256 secs
.RE
.PP
\fIbr_cost\fR
Total cost from transmitting bridge to root
.RE
.PP
-\fIoutdev\fR
+\fIoutdev_name\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIprotocol\fR
+\fIllcproto_stp\fR
.RS 4
-Packet protocol
+Constant used to signify Bridge Spanning Tree Protocol packet
.RE
.PP
\fIpf\fR
\(lqbridge\(rq
.RE
.PP
-\fIbr_htime\fR
+\fInf_accept\fR
.RS 4
-Hello time in 1/256 secs
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIbr_vid\fR
+\fIllcpdu\fR
.RS 4
-Protocol version identifier
+Address of LLC Protocol Data Unit
.RE
.PP
-\fInf_stop\fR
+\fIbr_rid\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Identity of root bridge
.RE
.PP
-\fIbrhdr\fR
+\fIoutdev\fR
.RS 4
-Address of bridge header
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIoutdev_name\fR
+\fInf_stop\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIbr_prid\fR
+\fIbr_max\fR
.RS 4
-Protocol identifier
+Max age in 1/256 secs
.RE
.PP
\fIbr_bid\fR
.fi
.SH "VALUES"
.PP
-\fIbr_msg\fR
+\fIbr_rid\fR
.RS 4
-Message age in 1/256 secs
+Identity of root bridge
.RE
.PP
-\fInf_accept\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIbr_cost\fR
+\fInf_stop\fR
.RS 4
-Total cost from transmitting bridge to root
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIindev_name\fR
+\fIbr_bid\fR
.RS 4
-Name of network device packet was received on (if known)
+Identity of bridge
.RE
.PP
-\fIllcpdu\fR
+\fIbr_max\fR
.RS 4
-Address of LLC Protocol Data Unit
+Max age in 1/256 secs
.RE
.PP
-\fIbr_mac\fR
+\fInf_accept\fR
.RS 4
-Bridge MAC address
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fInf_queue\fR
+\fIllcpdu\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Address of LLC Protocol Data Unit
.RE
.PP
-\fIlength\fR
+\fIbr_cost\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Total cost from transmitting bridge to root
.RE
.PP
-\fIbr_flags\fR
+\fIoutdev_name\fR
.RS 4
-BPDU flags
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIbr_fd\fR
+\fIllcproto_stp\fR
.RS 4
-Forward delay in 1/256 secs
+Constant used to signify Bridge Spanning Tree Protocol packet
.RE
.PP
-\fIbr_poid\fR
+\fIpf\fR
.RS 4
-Port identifier
+Protocol family \-\- always
+\(lqbridge\(rq
.RE
.PP
-\fIllcproto_stp\fR
+\fIindev\fR
.RS 4
-Constant used to signify Bridge Spanning Tree Protocol packet
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fInf_drop\fR
+\fIbr_htime\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Hello time in 1/256 secs
.RE
.PP
-\fIbr_rid\fR
+\fInf_queue\fR
.RS 4
-Identity of root bridge
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIindev\fR
+\fIbr_flags\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+BPDU flags
.RE
.PP
-\fInf_stolen\fR
+\fIbr_fd\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Forward delay in 1/256 secs
.RE
.PP
-\fIbr_max\fR
+\fIbr_vid\fR
.RS 4
-Max age in 1/256 secs
+Protocol version identifier
.RE
.PP
-\fInf_repeat\fR
+\fIbr_mac\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Bridge MAC address
.RE
.PP
-\fIbr_rmac\fR
+\fIbr_msg\fR
.RS 4
-Root bridge MAC address
+Message age in 1/256 secs
.RE
.PP
-\fIbr_type\fR
+\fIbr_prid\fR
.RS 4
-BPDU type
+Protocol identifier
.RE
.PP
-\fIbr_prid\fR
+\fIbrhdr\fR
.RS 4
-Protocol identifier
+Address of bridge header
.RE
.PP
-\fIbr_bid\fR
+\fIbr_type\fR
.RS 4
-Identity of bridge
+BPDU type
.RE
.PP
-\fIoutdev_name\fR
+\fIbr_poid\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Port identifier
.RE
.PP
-\fInf_stop\fR
+\fInf_stolen\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIbrhdr\fR
+\fIlength\fR
.RS 4
-Address of bridge header
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIbr_vid\fR
+\fInf_repeat\fR
.RS 4
-Protocol version identifier
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIbr_htime\fR
+\fIprotocol\fR
.RS 4
-Hello time in 1/256 secs
+Packet protocol
.RE
.PP
-\fIpf\fR
+\fIbr_rmac\fR
.RS 4
-Protocol family \-\- always
-\(lqbridge\(rq
+Root bridge MAC address
.RE
.PP
-\fIoutdev\fR
+\fInf_drop\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIprotocol\fR
+\fIindev_name\fR
.RS 4
-Packet protocol
+Name of network device packet was received on (if known)
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIprotocol\fR
-.RS 4
-Packet protocol from driver (ipv4 only)
-.RE
-.PP
-\fIoutdev\fR
+\fInf_repeat\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIiphdr\fR
+\fIdaddr\fR
.RS 4
-Address of IP header
+A string representing the destination IP address
.RE
.PP
-\fIurg\fR
+\fIprotocol\fR
.RS 4
-TCP URG flag (if protocol is TCP; ipv4 only)
+Packet protocol from driver (ipv4 only)
.RE
.PP
-\fIpf\fR
+\fIlength\fR
.RS 4
-Protocol family \-\- either
-\(lqipv4\(rq
-or
-\(lqipv6\(rq
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIdport\fR
+\fInf_stolen\fR
.RS 4
-TCP or UDP destination port (ipv4 only)
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIack\fR
+\fIindev_name\fR
.RS 4
-TCP ACK flag (if protocol is TCP; ipv4 only)
+Name of network device packet was received on (if known)
.RE
.PP
-\fIrst\fR
+\fInf_drop\fR
.RS 4
-TCP RST flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIipproto_udp\fR
+\fIurg\fR
.RS 4
-Constant used to signify that the packet protocol is UDP
+TCP URG flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIdaddr\fR
+\fIsaddr\fR
.RS 4
-A string representing the destination IP address
+A string representing the source IP address
.RE
.PP
-\fIpsh\fR
+\fIipproto_tcp\fR
.RS 4
-TCP PSH flag (if protocol is TCP; ipv4 only)
+Constant used to signify that the packet protocol is TCP
.RE
.PP
-\fInf_stop\fR
+\fIrst\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+TCP RST flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIoutdev_name\fR
+\fInf_queue\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIipproto_tcp\fR
+\fIsyn\fR
.RS 4
-Constant used to signify that the packet protocol is TCP
+TCP SYN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsaddr\fR
+\fIpf\fR
.RS 4
-A string representing the source IP address
+Protocol family \-\- either
+\(lqipv4\(rq
+or
+\(lqipv6\(rq
.RE
.PP
-\fInf_repeat\fR
+\fIoutdev_name\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fInf_stolen\fR
+\fIpsh\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+TCP PSH flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsyn\fR
+\fIindev\fR
.RS 4
-TCP SYN flag (if protocol is TCP; ipv4 only)
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIindev\fR
+\fInf_stop\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fInf_drop\fR
+\fIsport\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+TCP or UDP source port (ipv4 only)
.RE
.PP
\fIfamily\fR
TCP FIN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fInf_queue\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIsport\fR
+\fIack\fR
.RS 4
-TCP or UDP source port (ipv4 only)
+TCP ACK flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIlength\fR
+\fIdport\fR
.RS 4
-The length of the packet buffer contents, in bytes
+TCP or UDP destination port (ipv4 only)
.RE
.PP
-\fIindev_name\fR
+\fIipproto_udp\fR
.RS 4
-Name of network device packet was received on (if known)
+Constant used to signify that the packet protocol is UDP
.RE
.PP
\fInf_accept\fR
.RS 4
Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
+.PP
+\fIiphdr\fR
+.RS 4
+Address of IP header
+.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIoutdev_name\fR
+\fInf_accept\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIipproto_tcp\fR
+\fIiphdr\fR
.RS 4
-Constant used to signify that the packet protocol is TCP
+Address of IP header
.RE
.PP
-\fIsaddr\fR
+\fIipproto_udp\fR
.RS 4
-A string representing the source IP address
+Constant used to signify that the packet protocol is UDP
.RE
.PP
-\fIpsh\fR
+\fIdport\fR
.RS 4
-TCP PSH flag (if protocol is TCP; ipv4 only)
+TCP or UDP destination port (ipv4 only)
.RE
.PP
-\fInf_stop\fR
+\fIack\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+TCP ACK flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIpf\fR
+\fInf_stop\fR
.RS 4
-Protocol family \-\- either
-\(lqipv4\(rq
-or
-\(lqipv6\(rq
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIdport\fR
+\fIsport\fR
.RS 4
-TCP or UDP destination port (ipv4 only)
+TCP or UDP source port (ipv4 only)
.RE
.PP
-\fIipproto_udp\fR
+\fIfin\fR
.RS 4
-Constant used to signify that the packet protocol is UDP
+TCP FIN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIrst\fR
+\fIoutdev\fR
.RS 4
-TCP RST flag (if protocol is TCP; ipv4 only)
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIack\fR
+\fIfamily\fR
.RS 4
-TCP ACK flag (if protocol is TCP; ipv4 only)
+IP address family
.RE
.PP
-\fIdaddr\fR
+\fIindev\fR
.RS 4
-A string representing the destination IP address
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fIprotocol\fR
+\fIpsh\fR
.RS 4
-Packet protocol from driver (ipv4 only)
+TCP PSH flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIoutdev\fR
+\fIoutdev_name\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIiphdr\fR
+\fIpf\fR
.RS 4
-Address of IP header
+Protocol family \-\- either
+\(lqipv4\(rq
+or
+\(lqipv6\(rq
.RE
.PP
-\fIurg\fR
+\fInf_queue\fR
.RS 4
-TCP URG flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIsport\fR
+\fIrst\fR
.RS 4
-TCP or UDP source port (ipv4 only)
+TCP RST flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fInf_queue\fR
+\fIsyn\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+TCP SYN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIlength\fR
+\fIipproto_tcp\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Constant used to signify that the packet protocol is TCP
.RE
.PP
-\fInf_accept\fR
+\fIsaddr\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+A string representing the source IP address
.RE
.PP
\fIindev_name\fR
Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIindev\fR
+\fIurg\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+TCP URG flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIfamily\fR
+\fInf_stolen\fR
.RS 4
-IP address family
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIfin\fR
+\fIprotocol\fR
.RS 4
-TCP FIN flag (if protocol is TCP; ipv4 only)
+Packet protocol from driver (ipv4 only)
.RE
.PP
-\fIsyn\fR
+\fIdaddr\fR
.RS 4
-TCP SYN flag (if protocol is TCP; ipv4 only)
+A string representing the destination IP address
.RE
.PP
-\fInf_stolen\fR
+\fInf_repeat\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fInf_repeat\fR
+\fIlength\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+The length of the packet buffer contents, in bytes
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIindev_name\fR
+\fIpf\fR
.RS 4
-Name of network device packet was received on (if known)
+Protocol family \-\- either
+\(lqipv4\(rq
+or
+\(lqipv6\(rq
.RE
.PP
-\fInf_accept\fR
+\fIoutdev_name\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fIsport\fR
+\fIpsh\fR
.RS 4
-TCP or UDP source port (ipv4 only)
+TCP PSH flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIlength\fR
+\fIindev\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fInf_queue\fR
+\fIsport\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+TCP or UDP source port (ipv4 only)
.RE
.PP
-\fIfin\fR
+\fInf_stop\fR
.RS 4
-TCP FIN flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIfamily\fR
+\fIoutdev\fR
.RS 4
-IP address family
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIindev\fR
+\fIfin\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+TCP FIN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fInf_drop\fR
+\fIfamily\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+IP address family
.RE
.PP
-\fInf_stolen\fR
+\fIack\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+TCP ACK flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsyn\fR
+\fIdport\fR
.RS 4
-TCP SYN flag (if protocol is TCP; ipv4 only)
+TCP or UDP destination port (ipv4 only)
.RE
.PP
-\fInf_repeat\fR
+\fIiphdr\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Address of IP header
.RE
.PP
-\fIsaddr\fR
+\fInf_accept\fR
.RS 4
-A string representing the source IP address
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIipproto_tcp\fR
+\fIipproto_udp\fR
.RS 4
-Constant used to signify that the packet protocol is TCP
+Constant used to signify that the packet protocol is UDP
.RE
.PP
-\fIoutdev_name\fR
+\fIdaddr\fR
.RS 4
-Name of network device packet will be routed to (if known)
+A string representing the destination IP address
.RE
.PP
-\fInf_stop\fR
+\fIprotocol\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Packet protocol from driver (ipv4 only)
.RE
.PP
-\fIpsh\fR
+\fInf_repeat\fR
.RS 4
-TCP PSH flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIdaddr\fR
+\fIlength\fR
.RS 4
-A string representing the destination IP address
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIrst\fR
+\fInf_stolen\fR
.RS 4
-TCP RST flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIipproto_udp\fR
+\fIindev_name\fR
.RS 4
-Constant used to signify that the packet protocol is UDP
+Name of network device packet was received on (if known)
.RE
.PP
-\fIack\fR
+\fIurg\fR
.RS 4
-TCP ACK flag (if protocol is TCP; ipv4 only)
+TCP URG flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIdport\fR
+\fInf_drop\fR
.RS 4
-TCP or UDP destination port (ipv4 only)
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIpf\fR
+\fIsaddr\fR
.RS 4
-Protocol family \-\- either
-\(lqipv4\(rq
-or
-\(lqipv6\(rq
+A string representing the source IP address
.RE
.PP
-\fIiphdr\fR
+\fIipproto_tcp\fR
.RS 4
-Address of IP header
+Constant used to signify that the packet protocol is TCP
.RE
.PP
-\fIurg\fR
+\fIrst\fR
.RS 4
-TCP URG flag (if protocol is TCP; ipv4 only)
+TCP RST flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIoutdev\fR
+\fInf_queue\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIprotocol\fR
+\fIsyn\fR
.RS 4
-Packet protocol from driver (ipv4 only)
+TCP SYN flag (if protocol is TCP; ipv4 only)
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIrst\fR
+\fInf_stolen\fR
.RS 4
-TCP RST flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIipproto_udp\fR
+\fInf_repeat\fR
.RS 4
-Constant used to signify that the packet protocol is UDP
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIack\fR
+\fIdaddr\fR
.RS 4
-TCP ACK flag (if protocol is TCP; ipv4 only)
+A string representing the destination IP address
.RE
.PP
-\fIdaddr\fR
+\fIprotocol\fR
.RS 4
-A string representing the destination IP address
+Packet protocol from driver (ipv4 only)
.RE
.PP
-\fIpf\fR
+\fIlength\fR
.RS 4
-Protocol family \-\- either
-\(lqipv4\(rq
-or
-\(lqipv6\(rq
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIdport\fR
+\fIsaddr\fR
.RS 4
-TCP or UDP destination port (ipv4 only)
+A string representing the source IP address
+.RE
+.PP
+\fIindev_name\fR
+.RS 4
+Name of network device packet was received on (if known)
.RE
.PP
\fIurg\fR
TCP URG flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIiphdr\fR
+\fInf_drop\fR
.RS 4
-Address of IP header
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIprotocol\fR
+\fInf_queue\fR
.RS 4
-Packet protocol from driver (ipv4 only)
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIoutdev\fR
+\fIrst\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+TCP RST flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsaddr\fR
+\fIsyn\fR
.RS 4
-A string representing the source IP address
+TCP SYN flag (if protocol is TCP; ipv4 only)
.RE
.PP
\fIipproto_tcp\fR
Name of network device packet will be routed to (if known)
.RE
.PP
-\fIpsh\fR
-.RS 4
-TCP PSH flag (if protocol is TCP; ipv4 only)
-.RE
-.PP
-\fInf_stop\fR
+\fIpf\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Protocol family \-\- either
+\(lqipv4\(rq
+or
+\(lqipv6\(rq
.RE
.PP
-\fIsyn\fR
+\fIindev\fR
.RS 4
-TCP SYN flag (if protocol is TCP; ipv4 only)
+Address of net_device representing input device, 0 if unknown
.RE
.PP
-\fInf_stolen\fR
+\fIpsh\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+TCP PSH flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fInf_repeat\fR
+\fIack\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+TCP ACK flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIindev_name\fR
+\fIsport\fR
.RS 4
-Name of network device packet was received on (if known)
+TCP or UDP source port (ipv4 only)
.RE
.PP
-\fInf_accept\fR
+\fInf_stop\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.PP
-\fIlength\fR
+\fIfin\fR
.RS 4
-The length of the packet buffer contents, in bytes
+TCP FIN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsport\fR
+\fIoutdev\fR
.RS 4
-TCP or UDP source port (ipv4 only)
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fInf_queue\fR
+\fIfamily\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+IP address family
.RE
.PP
-\fIfin\fR
+\fIiphdr\fR
.RS 4
-TCP FIN flag (if protocol is TCP; ipv4 only)
+Address of IP header
.RE
.PP
-\fIfamily\fR
+\fInf_accept\fR
.RS 4
-IP address family
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIindev\fR
+\fIipproto_udp\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+Constant used to signify that the packet protocol is UDP
.RE
.PP
-\fInf_drop\fR
+\fIdport\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+TCP or UDP destination port (ipv4 only)
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIdport\fR
+\fIsaddr\fR
.RS 4
-TCP or UDP destination port (ipv4 only)
+A string representing the source IP address
.RE
.PP
-\fIpf\fR
+\fIurg\fR
.RS 4
-Protocol family \- either \*(Aqipv4\*(Aq or \*(Aqipv6\*(Aq
+TCP URG flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIdaddr\fR
+\fInf_drop\fR
.RS 4
-A string representing the destination IP address
+Constant used to signify a \*(Aqdrop\*(Aq verdict
.RE
.PP
-\fIipproto_udp\fR
+\fIindev_name\fR
.RS 4
-Constant used to signify that the packet protocol is UDP
+Name of network device packet was received on (if known)
.RE
.PP
-\fIrst\fR
+\fInf_stolen\fR
.RS 4
-TCP RST flag (if protocol is TCP; ipv4 only)
+Constant used to signify a \*(Aqstolen\*(Aq verdict
.RE
.PP
-\fIack\fR
+\fIlength\fR
.RS 4
-TCP ACK flag (if protocol is TCP; ipv4 only)
+The length of the packet buffer contents, in bytes
.RE
.PP
-\fIoutdev\fR
+\fIdaddr\fR
.RS 4
-Address of net_device representing output device, 0 if unknown
+A string representing the destination IP address
.RE
.PP
-\fIprotocol\fR
+\fInf_repeat\fR
.RS 4
-Packet protocol from driver (ipv4 only)
+Constant used to signify a \*(Aqrepeat\*(Aq verdict
.RE
.PP
-\fIiphdr\fR
+\fIprotocol\fR
.RS 4
-Address of IP header
+Packet protocol from driver (ipv4 only)
.RE
.PP
-\fIurg\fR
+\fIsyn\fR
.RS 4
-TCP URG flag (if protocol is TCP; ipv4 only)
+TCP SYN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIipproto_tcp\fR
+\fIrst\fR
.RS 4
-Constant used to signify that the packet protocol is TCP
+TCP RST flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIoutdev_name\fR
+\fInf_queue\fR
.RS 4
-Name of network device packet will be routed to (if known)
+Constant used to signify a \*(Aqqueue\*(Aq verdict
.RE
.PP
-\fIsaddr\fR
+\fIipproto_tcp\fR
.RS 4
-A string representing the source IP address
+Constant used to signify that the packet protocol is TCP
.RE
.PP
-\fInf_stop\fR
+\fIindev\fR
.RS 4
-Constant used to signify a \*(Aqstop\*(Aq verdict
+Address of net_device representing input device, 0 if unknown
.RE
.PP
\fIpsh\fR
TCP PSH flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIsyn\fR
+\fIoutdev_name\fR
.RS 4
-TCP SYN flag (if protocol is TCP; ipv4 only)
+Name of network device packet will be routed to (if known)
.RE
.PP
-\fInf_stolen\fR
+\fIpf\fR
.RS 4
-Constant used to signify a \*(Aqstolen\*(Aq verdict
+Protocol family \- either \*(Aqipv4\*(Aq or \*(Aqipv6\*(Aq
.RE
.PP
-\fInf_repeat\fR
+\fInf_accept\fR
.RS 4
-Constant used to signify a \*(Aqrepeat\*(Aq verdict
+Constant used to signify an \*(Aqaccept\*(Aq verdict
.RE
.PP
-\fIsport\fR
+\fIipproto_udp\fR
.RS 4
-TCP or UDP source port (ipv4 only)
+Constant used to signify that the packet protocol is UDP
.RE
.PP
-\fIlength\fR
+\fIiphdr\fR
.RS 4
-The length of the packet buffer contents, in bytes
+Address of IP header
.RE
.PP
-\fInf_queue\fR
+\fIdport\fR
.RS 4
-Constant used to signify a \*(Aqqueue\*(Aq verdict
+TCP or UDP destination port (ipv4 only)
.RE
.PP
-\fInf_accept\fR
+\fIack\fR
.RS 4
-Constant used to signify an \*(Aqaccept\*(Aq verdict
+TCP ACK flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fIindev_name\fR
+\fIfin\fR
.RS 4
-Name of network device packet was received on (if known)
+TCP FIN flag (if protocol is TCP; ipv4 only)
.RE
.PP
-\fInf_drop\fR
+\fIoutdev\fR
.RS 4
-Constant used to signify a \*(Aqdrop\*(Aq verdict
+Address of net_device representing output device, 0 if unknown
.RE
.PP
-\fIindev\fR
+\fIfamily\fR
.RS 4
-Address of net_device representing input device, 0 if unknown
+IP address family
.RE
.PP
-\fIfin\fR
+\fIsport\fR
.RS 4
-TCP FIN flag (if protocol is TCP; ipv4 only)
+TCP or UDP source port (ipv4 only)
.RE
.PP
-\fIfamily\fR
+\fInf_stop\fR
.RS 4
-IP address family
+Constant used to signify a \*(Aqstop\*(Aq verdict
.RE
.SH SEE ALSO\n
.IR tapset::netfilter (3stap)
.fi
.SH "VALUES"
.PP
-\fIpage_index\fR
+\fIsb_flag\fR
.RS 4
-offset within mapping, can used a page identifier and position identifier in the page frame
+super block flags
.RE
.PP
-\fIi_flag\fR
+\fIrsize\fR
.RS 4
-file flags
+read size (in bytes)
.RE
.PP
-\fIsb_flag\fR
+\fIsize\fR
.RS 4
-super block flags
+number of pages to be read in this execution
.RE
.PP
-\fIdev\fR
+\fIpage_index\fR
.RS 4
-device identifier
+offset within mapping, can used a page identifier and position identifier in the page frame
.RE
.PP
-\fIi_size\fR
+\fIfile\fR
.RS 4
-file length in bytes
+file argument
.RE
.PP
-\fIrsize\fR
+\fIi_size\fR
.RS 4
-read size (in bytes)
+file length in bytes
.RE
.PP
-\fIsize\fR
+\fI__page\fR
.RS 4
-number of pages to be read in this execution
+the address of page
.RE
.PP
-\fIino\fR
+\fIi_flag\fR
.RS 4
-inode number
+file flags
.RE
.PP
-\fI__page\fR
+\fIdev\fR
.RS 4
-the address of page
+device identifier
.RE
.PP
-\fIfile\fR
+\fIino\fR
.RS 4
-file argument
+inode number
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIdev\fR
+\fIrpages\fR
.RS 4
-device identifier
+read size (in pages)
.RE
.PP
-\fIrpages\fR
+\fIrsize\fR
.RS 4
-read size (in pages)
+read size (in bytes)
.RE
.PP
-\fInr_pages\fR
+\fIsize\fR
.RS 4
number of pages attempted to read in this execution
.RE
.PP
-\fIino\fR
+\fIfile\fR
.RS 4
-inode number
+filp argument
.RE
.PP
-\fIsize\fR
+\fIdev\fR
.RS 4
-number of pages attempted to read in this execution
+device identifier
.RE
.PP
-\fIfile\fR
+\fInr_pages\fR
.RS 4
-filp argument
+number of pages attempted to read in this execution
.RE
.PP
-\fIrsize\fR
+\fIino\fR
.RS 4
-read size (in bytes)
+inode number
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fI__page\fR
+\fIsize\fR
.RS 4
-the address of page
+release pages
.RE
.PP
-\fIsize\fR
+\fIdev\fR
.RS 4
-release pages
+device identifier
.RE
.PP
\fIino\fR
inode number
.RE
.PP
-\fIdev\fR
+\fIpage_index\fR
.RS 4
-device identifier
+offset within mapping, can used a page identifier and position identifier in the page frame
.RE
.PP
-\fIpage_index\fR
+\fI__page\fR
.RS 4
-offset within mapping, can used a page identifier and position identifier in the page frame
+the address of page
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIpage_flag\fR
+\fI__page\fR
.RS 4
-page flags
+the address of page
.RE
.PP
-\fI__page\fR
+\fIpage_flag\fR
.RS 4
-the address of page
+page flags
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIto\fR
-.RS 4
-end address of this write operation
-.RE
-.PP
\fIoffset\fR
.RS 4
start address of this write operation
.RE
.PP
-\fIino\fR
-.RS 4
-inode number
-.RE
-.PP
\fIsize\fR
.RS 4
write bytes
offset within mapping, can used a page identifier and position identifier in the page frame
.RE
.PP
+\fIto\fR
+.RS 4
+end address of this write operation
+.RE
+.PP
+\fIino\fR
+.RS 4
+inode number
+.RE
+.PP
\fIdev\fR
.RS 4
device identifier
.fi
.SH "VALUES"
.PP
-\fIi_flag\fR
+\fIoffset\fR
.RS 4
-file flags
+start address of this write operation
.RE
.PP
-\fIdev\fR
+\fIsize\fR
.RS 4
-device identifier
+write bytes
.RE
.PP
\fIsb_flag\fR
super block flags
.RE
.PP
-\fIpage_index\fR
-.RS 4
-offset within mapping, can used a page identifier and position identifier in the page frame
-.RE
-.PP
-\fIsize\fR
+\fIto\fR
.RS 4
-write bytes
+end address of this write operation
.RE
.PP
-\fIoffset\fR
+\fIino\fR
.RS 4
-start address of this write operation
+inode number
.RE
.PP
-\fIto\fR
+\fIi_flag\fR
.RS 4
-end address of this write operation
+file flags
.RE
.PP
-\fIino\fR
+\fIdev\fR
.RS 4
-inode number
+device identifier
.RE
.PP
\fI__page\fR
.RS 4
file length in bytes
.RE
+.PP
+\fIpage_index\fR
+.RS 4
+offset within mapping, can used a page identifier and position identifier in the page frame
+.RE
.SH "DESCRIPTION"
.PP
Fires when do a write operation on nfs, often after prepare_write
.fi
.SH "VALUES"
.PP
-\fIsb_flag\fR
+\fIfor_reclaim\fR
.RS 4
-super block flags
+a flag of writeback_control, indicates if it\*(Aqs invoked from the page allocator
.RE
.PP
-\fIdev\fR
+\fIpage_index\fR
.RS 4
-device identifier
+offset within mapping, can used a page identifier and position identifier in the page frame
.RE
.PP
-\fIi_flag\fR
+\fI__page\fR
.RS 4
-file flags
+the address of page
.RE
.PP
-\fIfor_reclaim\fR
+\fIi_size\fR
.RS 4
-a flag of writeback_control, indicates if it\*(Aqs invoked from the page allocator
+file length in bytes
.RE
.PP
-\fIpage_index\fR
+\fIfor_kupdate\fR
.RS 4
-offset within mapping, can used a page identifier and position identifier in the page frame
+a flag of writeback_control, indicates if it\*(Aqs a kupdate writeback
.RE
.PP
-\fIi_state\fR
+\fIdev\fR
.RS 4
-inode state flags
+device identifier
.RE
.PP
-\fIfor_kupdate\fR
+\fIi_flag\fR
.RS 4
-a flag of writeback_control, indicates if it\*(Aqs a kupdate writeback
+file flags
+.RE
+.PP
+\fIwsize\fR
+.RS 4
+write size
.RE
.PP
\fIino\fR
inode number
.RE
.PP
-\fIwsize\fR
+\fIsb_flag\fR
.RS 4
-write size
+super block flags
.RE
.PP
\fIsize\fR
number of pages to be written in this execution
.RE
.PP
-\fI__page\fR
-.RS 4
-the address of page
-.RE
-.PP
-\fIi_size\fR
+\fIi_state\fR
.RS 4
-file length in bytes
+inode state flags
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIfor_reclaim\fR
+\fIdev\fR
.RS 4
-a flag of writeback_control, indicates if it\*(Aqs invoked from the page allocator
+device identifier
.RE
.PP
-\fInr_to_write\fR
+\fIwpages\fR
.RS 4
-number of pages attempted to be written in this execution
+write size (in pages)
.RE
.PP
-\fIdev\fR
+\fIwsize\fR
.RS 4
-device identifier
+write size
.RE
.PP
-\fIfor_kupdate\fR
+\fIino\fR
.RS 4
-a flag of writeback_control, indicates if it\*(Aqs a kupdate writeback
+inode number
.RE
.PP
-\fIwpages\fR
+\fIfor_reclaim\fR
.RS 4
-write size (in pages)
+a flag of writeback_control, indicates if it\*(Aqs invoked from the page allocator
.RE
.PP
-\fIsize\fR
+\fInr_to_write\fR
.RS 4
number of pages attempted to be written in this execution
.RE
.PP
-\fIwsize\fR
+\fIfor_kupdate\fR
.RS 4
-write size
+a flag of writeback_control, indicates if it\*(Aqs a kupdate writeback
.RE
.PP
-\fIino\fR
+\fIsize\fR
.RS 4
-inode number
+number of pages attempted to be written in this execution
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
+\fIcache_valid\fR
+.RS 4
+cache related bit mask flag
+.RE
+.PP
\fIattrtimeo\fR
.RS 4
how long the cached information is assumed to be valid\&. We need to revalidate the cached attrs for this inode if jiffies \- read_cache_jiffies > attrtimeo\&.
the address of buf in user space
.RE
.PP
-\fIcache_valid\fR
-.RS 4
-cache related bit mask flag
-.RE
-.PP
-\fIpos\fR
-.RS 4
-current position of file
-.RE
-.PP
\fIcache_time\fR
.RS 4
when we started read\-caching this inode
parent dir name
.RE
.PP
+\fIpos\fR
+.RS 4
+current position of file
+.RE
+.PP
\fIdev\fR
.RS 4
device identifier
.RE
.PP
-\fIfile_name\fR
+\fIino\fR
.RS 4
-file name
+inode number
.RE
.PP
\fIcount\fR
read bytes
.RE
.PP
-\fIino\fR
+\fIfile_name\fR
.RS 4
-inode number
+file name
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
+\fIino\fR
.RS 4
-file name
+inode number
.RE
.PP
-\fIino\fR
+\fIparent_name\fR
.RS 4
-inode number
+parent dir name
.RE
.PP
-\fIcount\fR
+\fIpos\fR
.RS 4
-read bytes
+offset of the file
.RE
.PP
-\fIbuf\fR
+\fIdev\fR
.RS 4
-the address of buf in user space
+device identifier
.RE
.PP
-\fIparent_name\fR
+\fIfile_name\fR
.RS 4
-parent dir name
+file name
.RE
.PP
-\fIdev\fR
+\fIcount\fR
.RS 4
-device identifier
+read bytes
.RE
.PP
-\fIpos\fR
+\fIbuf\fR
.RS 4
-offset of the file
+the address of buf in user space
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
number of dirty pages
.RE
.PP
-\fIdev\fR
+\fIino\fR
.RS 4
-device identifier
+inode number
.RE
.PP
-\fIino\fR
+\fIdev\fR
.RS 4
-inode number
+device identifier
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
the offset of the file will be repositioned
.RE
.PP
+\fIwhence\fR
+.RS 4
+the position to seek from
+.RE
+.PP
\fIino\fR
.RS 4
inode number
.RS 4
device identifier
.RE
-.PP
-\fIwhence\fR
-.RS 4
-the position to seek from
-.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIino\fR
+\fIfl_flag\fR
.RS 4
-inode number
+lock flags
.RE
.PP
-\fIfl_start\fR
+\fIdev\fR
.RS 4
-starting offset of locked region
+device identifier
.RE
.PP
-\fIcmd\fR
+\fIino\fR
.RS 4
-cmd arguments
+inode number
.RE
.PP
-\fIfl_flag\fR
+\fIi_mode\fR
.RS 4
-lock flags
+file type and access rights
.RE
.PP
-\fIdev\fR
+\fIfl_type\fR
.RS 4
-device identifier
+lock type
.RE
.PP
-\fIfl_end\fR
+\fIfl_start\fR
.RS 4
-ending offset of locked region
+starting offset of locked region
.RE
.PP
-\fIfl_type\fR
+\fIfl_end\fR
.RS 4
-lock type
+ending offset of locked region
.RE
.PP
-\fIi_mode\fR
+\fIcmd\fR
.RS 4
-file type and access rights
+cmd arguments
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIino\fR
-.RS 4
-inode number
-.RE
-.PP
-\fIvm_flag\fR
+\fIfile_name\fR
.RS 4
-vm flags
+file name
.RE
.PP
\fIvm_end\fR
the first byte after end address within vm_mm
.RE
.PP
-\fIfile_name\fR
+\fIino\fR
.RS 4
-file name
+inode number
.RE
.PP
-\fIcache_time\fR
+\fIparent_name\fR
.RS 4
-when we started read\-caching this inode
+parent dir name
.RE
.PP
\fIdev\fR
device identifier
.RE
.PP
-\fIparent_name\fR
+\fIvm_flag\fR
.RS 4
-parent dir name
+vm flags
.RE
.PP
-\fIvm_start\fR
+\fIcache_time\fR
.RS 4
-start address within vm_mm
+when we started read\-caching this inode
.RE
.PP
-\fIcache_valid\fR
+\fIbuf\fR
.RS 4
-cache related bit mask flag
+the address of buf in user space
+.RE
+.PP
+\fIvm_start\fR
+.RS 4
+start address within vm_mm
.RE
.PP
\fIattrtimeo\fR
how long the cached information is assumed to be valid\&. We need to revalidate the cached attrs for this inode if jiffies \- read_cache_jiffies > attrtimeo\&.
.RE
.PP
-\fIbuf\fR
+\fIcache_valid\fR
.RS 4
-the address of buf in user space
+cache related bit mask flag
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIdev\fR
+\fIi_size\fR
.RS 4
-device identifier
+file length in bytes
.RE
.PP
-\fIino\fR
+\fIfile_name\fR
.RS 4
-inode number
+file name
.RE
.PP
-\fIi_size\fR
+\fIflag\fR
.RS 4
-file length in bytes
+file flag
.RE
.PP
-\fIflag\fR
+\fIdev\fR
.RS 4
-file flag
+device identifier
.RE
.PP
-\fIfile_name\fR
+\fIino\fR
.RS 4
-file name
+inode number
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
+\fIcache_time\fR
+.RS 4
+when we started read\-caching this inode
+.RE
+.PP
\fIattrtimeo\fR
.RS 4
how long the cached information is assumed to be valid\&. We need to revalidate the cached attrs for this inode if jiffies \- read_cache_jiffies > attrtimeo\&.
cache related bit mask flag
.RE
.PP
-\fIpos\fR
+\fIfile_name\fR
.RS 4
-current position of file
+file name
.RE
.PP
-\fIcache_time\fR
+\fIcount\fR
.RS 4
-when we started read\-caching this inode
+read bytes
.RE
.PP
-\fIdev\fR
+\fIino\fR
.RS 4
-device identifier
+inode number
.RE
.PP
\fIparent_name\fR
parent dir name
.RE
.PP
-\fIfile_name\fR
-.RS 4
-file name
-.RE
-.PP
-\fIcount\fR
+\fIpos\fR
.RS 4
-read bytes
+current position of file
.RE
.PP
-\fIino\fR
+\fIdev\fR
.RS 4
-inode number
+device identifier
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIdev\fR
+\fIino\fR
.RS 4
-device identifier
+inode number
.RE
.PP
\fImode\fR
file mode
.RE
.PP
-\fIino\fR
+\fIdev\fR
.RS 4
-inode number
+device identifier
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIcache_valid\fR
-.RS 4
-cache related bit mask flag
-.RE
-.PP
\fIattrtimeo\fR
.RS 4
how long the cached information is assumed to be valid\&. We need to revalidate the cached attrs for this inode if jiffies \- read_cache_jiffies > attrtimeo\&.
.RE
.PP
-\fIdev\fR
+\fIcache_valid\fR
.RS 4
-device identifier
+cache related bit mask flag
.RE
.PP
\fIcache_time\fR
when we started read\-caching this inode
.RE
.PP
-\fIppos\fR
+\fIino\fR
.RS 4
-current position of file
+inode number
.RE
.PP
-\fIino\fR
+\fIdev\fR
.RS 4
-inode number
+device identifier
.RE
.PP
\fIcount\fR
.RS 4
read bytes
.RE
+.PP
+\fIppos\fR
+.RS 4
+current position of file
+.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
+\fIdev\fR
.RS 4
-file name
+device identifier
.RE
.PP
-\fIino\fR
+\fIparent_name\fR
.RS 4
-inode number
+parent dir name
.RE
.PP
-\fIcount\fR
+\fIpos\fR
.RS 4
-read bytes
+offset of the file
.RE
.PP
-\fIparent_name\fR
+\fIino\fR
.RS 4
-parent dir name
+inode number
.RE
.PP
-\fIdev\fR
+\fIcount\fR
.RS 4
-device identifier
+read bytes
.RE
.PP
-\fIpos\fR
+\fIfile_name\fR
.RS 4
-offset of the file
+file name
.RE
.SH SEE ALSO\n
.IR tapset::nfs (3stap)
.fi
.SH "VALUES"
.PP
+\fIsize\fR
+.RS 4
+read bytes in this execution
+.RE
+.PP
\fIbitmask1\fR
.RS 4
V4 bitmask representing the set of attributes supported on this filesystem
transfer protocol
.RE
.PP
-\fIbitmask0\fR
+\fIserver_ip\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+IP address of server
.RE
.PP
-\fIsize\fR
+\fIversion\fR
.RS 4
-read bytes in this execution
+NFS version
.RE
.PP
\fIoffset\fR
the file offset
.RE
.PP
-\fIserver_ip\fR
-.RS 4
-IP address of server
-.RE
-.PP
-\fIversion\fR
+\fIbitmask0\fR
.RS 4
-NFS version
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIversion\fR
+\fIprot\fR
.RS 4
-NFS version
+transfer protocol
.RE
.PP
-\fItimestamp\fR
+\fIserver_ip\fR
.RS 4
-V4 timestamp, which is used for lease renewal
+IP address of server
.RE
.PP
-\fIserver_ip\fR
+\fIversion\fR
.RS 4
-IP address of server
+NFS version
.RE
.PP
-\fIvalid\fR
+\fIcount\fR
.RS 4
-fattr\->valid, indicates which fields are valid
+number of bytes committed
.RE
.PP
-\fIstatus\fR
+\fItimestamp\fR
.RS 4
-result of last operation
+V4 timestamp, which is used for lease renewal
.RE
.PP
-\fIprot\fR
+\fIstatus\fR
.RS 4
-transfer protocol
+result of last operation
.RE
.PP
-\fIcount\fR
+\fIvalid\fR
.RS 4
-number of bytes committed
+fattr\->valid, indicates which fields are valid
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
+\fIsize\fR
+.RS 4
+bytes in this commit
+.RE
+.PP
\fIcount\fR
.RS 4
bytes in this commit
transfer protocol
.RE
.PP
-\fIsize\fR
+\fIserver_ip\fR
.RS 4
-bytes in this commit
+IP address of server
.RE
.PP
-\fIbitmask0\fR
+\fIversion\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+NFS version
.RE
.PP
\fIoffset\fR
the file offset
.RE
.PP
-\fIserver_ip\fR
-.RS 4
-IP address of server
-.RE
-.PP
-\fIversion\fR
+\fIbitmask0\fR
.RS 4
-NFS version
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIfilelen\fR
+\fIserver_ip\fR
.RS 4
-length of file name
+IP address of server
.RE
.PP
-\fIflag\fR
+\fIprot\fR
.RS 4
-indicates create mode (only for NFSv3 and NFSv4)
+transfer protocol
.RE
.PP
\fIfilename\fR
file name
.RE
.PP
-\fIprot\fR
+\fIversion\fR
.RS 4
-transfer protocol
+NFS version (the function is used for all NFS version)
.RE
.PP
-\fIfh\fR
+\fIfilelen\fR
.RS 4
-file handle of parent dir
+length of file name
.RE
.PP
-\fIversion\fR
+\fIflag\fR
.RS 4
-NFS version (the function is used for all NFS version)
+indicates create mode (only for NFSv3 and NFSv4)
.RE
.PP
-\fIserver_ip\fR
+\fIfh\fR
.RS 4
-IP address of server
+file handle of parent dir
.RE
.SH SEE ALSO\n
.IR tapset::nfs_proc (3stap)
IP address of server
.RE
.PP
-\fIname_len\fR
+\fIprot\fR
.RS 4
-the length of file name
+transfer protocol
.RE
.PP
-\fIfilename\fR
+\fIversion\fR
.RS 4
-the name of file which client opens/searches on server
+NFS version
.RE
.PP
-\fIbitmask0\fR
+\fIfilename\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+the name of file which client opens/searches on server
.RE
.PP
-\fIversion\fR
+\fIname_len\fR
.RS 4
-NFS version
+the length of file name
.RE
.PP
\fIbitmask1\fR
V4 bitmask representing the set of attributes supported on this filesystem
.RE
.PP
-\fIprot\fR
+\fIbitmask0\fR
.RS 4
-transfer protocol
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.SH SEE ALSO\n
.IR tapset::nfs_proc (3stap)
.fi
.SH "VALUES"
.PP
-\fIversion\fR
+\fImode\fR
.RS 4
-NFS version (the function is used for all NFS version)
+file mode
.RE
.PP
-\fIserver_ip\fR
+\fIflag\fR
.RS 4
-IP address of server
+file flag
.RE
.PP
-\fIprot\fR
+\fIfilename\fR
.RS 4
-transfer protocol
+file name
.RE
.PP
-\fIflag\fR
+\fIversion\fR
.RS 4
-file flag
+NFS version (the function is used for all NFS version)
.RE
.PP
-\fIfilename\fR
+\fIprot\fR
.RS 4
-file name
+transfer protocol
.RE
.PP
-\fImode\fR
+\fIserver_ip\fR
.RS 4
-file mode
+IP address of server
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIflags\fR
+\fIprot\fR
.RS 4
-used to set task\->tk_flags in rpc_init_task function
+transfer protocol
.RE
.PP
\fIserver_ip\fR
NFS version
.RE
.PP
-\fIcount\fR
+\fIoffset\fR
.RS 4
-read bytes in this execution
+the file offset
.RE
.PP
-\fIoffset\fR
+\fIflags\fR
.RS 4
-the file offset
+used to set task\->tk_flags in rpc_init_task function
.RE
.PP
-\fIprot\fR
+\fIcount\fR
.RS 4
-transfer protocol
+read bytes in this execution
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIversion\fR
+\fIstatus\fR
.RS 4
-NFS version
+result of last operation
.RE
.PP
\fItimestamp\fR
V4 timestamp, which is used for lease renewal
.RE
.PP
-\fIserver_ip\fR
+\fIversion\fR
.RS 4
-IP address of server
+NFS version
.RE
.PP
-\fIstatus\fR
+\fIserver_ip\fR
.RS 4
-result of last operation
+IP address of server
.RE
.PP
\fIprot\fR
.fi
.SH "VALUES"
.PP
-\fIcount\fR
-.RS 4
-read bytes in this execution
-.RE
-.PP
-\fIprot\fR
+\fIoffset\fR
.RS 4
-transfer protocol
+the file offset
.RE
.PP
\fIsize\fR
read bytes in this execution
.RE
.PP
-\fIoffset\fR
+\fIcount\fR
.RS 4
-the file offset
+read bytes in this execution
.RE
.PP
\fIserver_ip\fR
IP address of server
.RE
.PP
+\fIprot\fR
+.RS 4
+transfer protocol
+.RE
+.PP
\fIversion\fR
.RS 4
NFS version
.fi
.SH "VALUES"
.PP
-\fIfilename\fR
+\fIflag\fR
.RS 4
-file name
+file flag
.RE
.PP
\fImode\fR
file mode
.RE
.PP
-\fIflag\fR
+\fIversion\fR
.RS 4
-file flag
+NFS version (the function is used for all NFS version)
.RE
.PP
-\fIprot\fR
+\fIfilename\fR
.RS 4
-transfer protocol
+file name
.RE
.PP
-\fIversion\fR
+\fIprot\fR
.RS 4
-NFS version (the function is used for all NFS version)
+transfer protocol
.RE
.PP
\fIserver_ip\fR
.fi
.SH "VALUES"
.PP
-\fIserver_ip\fR
+\fIfh\fR
.RS 4
-IP address of server
+file handle of parent dir
.RE
.PP
-\fIfh\fR
+\fIfilelen\fR
.RS 4
-file handle of parent dir
+length of file name
.RE
.PP
\fIversion\fR
file name
.RE
.PP
-\fIfilelen\fR
+\fIserver_ip\fR
.RS 4
-length of file name
+IP address of server
.RE
.PP
\fIprot\fR
NFS version (the function is used for all NFS version)
.RE
.PP
-\fIserver_ip\fR
+\fInew_fh\fR
.RS 4
-IP address of server
+file handle of new parent dir
.RE
.PP
-\fInew_fh\fR
+\fIprot\fR
.RS 4
-file handle of new parent dir
+transfer protocol
+.RE
+.PP
+\fIserver_ip\fR
+.RS 4
+IP address of server
.RE
.PP
\fIold_fh\fR
old file name
.RE
.PP
-\fInew_filelen\fR
+\fIold_filelen\fR
.RS 4
-length of new file name
+length of old file name
.RE
.PP
\fInew_name\fR
new file name
.RE
.PP
-\fIold_filelen\fR
-.RS 4
-length of old file name
-.RE
-.PP
-\fIprot\fR
+\fInew_filelen\fR
.RS 4
-transfer protocol
+length of new file name
.RE
.SH SEE ALSO\n
.IR tapset::nfs_proc (3stap)
.fi
.SH "VALUES"
.PP
+\fIold_fh\fR
+.RS 4
+file handle of old parent dir
+.RE
+.PP
\fIserver_ip\fR
.RS 4
IP address of server
.RE
.PP
-\fItimestamp\fR
+\fIprot\fR
.RS 4
-V4 timestamp, which is used for lease renewal
+transfer protocol
.RE
.PP
-\fIversion\fR
+\fInew_fh\fR
.RS 4
-NFS version
+file handle of new parent dir
.RE
.PP
-\fIold_fh\fR
+\fIversion\fR
.RS 4
-file handle of old parent dir
+NFS version
.RE
.PP
-\fInew_fh\fR
+\fItimestamp\fR
.RS 4
-file handle of new parent dir
+V4 timestamp, which is used for lease renewal
.RE
.PP
\fIstatus\fR
.RS 4
result of last operation
.RE
-.PP
-\fIprot\fR
-.RS 4
-transfer protocol
-.RE
.SH "DESCRIPTION"
.PP
Fires when a reply to a rename RPC task is received or some rename error occurs (timeout or socket shutdown)\&.
.fi
.SH "VALUES"
.PP
-\fIprot\fR
+\fIversion\fR
.RS 4
-transfer protocol
+NFS version
.RE
.PP
-\fIversion\fR
+\fIserver_ip\fR
.RS 4
-NFS version
+IP address of server
.RE
.PP
-\fIfh\fR
+\fIprot\fR
.RS 4
-file handle of parent dir
+transfer protocol
.RE
.PP
-\fIserver_ip\fR
+\fIfh\fR
.RS 4
-IP address of server
+file handle of parent dir
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIprot\fR
-.RS 4
-transfer protocol
-.RE
-.PP
-\fIbitmask1\fR
+\fIoffset\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+the file offset
.RE
.PP
\fIbitmask0\fR
used to set task\->tk_flags in rpc_init_task function
.RE
.PP
-\fIoffset\fR
+\fIbitmask1\fR
.RS 4
-the file offset
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.PP
-\fIversion\fR
+\fIprot\fR
.RS 4
-NFS version
+transfer protocol
.RE
.PP
\fIserver_ip\fR
.RS 4
IP address of server
.RE
+.PP
+\fIversion\fR
+.RS 4
+NFS version
+.RE
.SH "DESCRIPTION"
.PP
All the nfs\&.proc\&.write kernel functions were removed in kernel commit 200baa in December 2006, so these probes do not exist on Linux 2\&.6\&.21 and newer kernels\&.
.fi
.SH "VALUES"
.PP
+\fItimestamp\fR
+.RS 4
+V4 timestamp, which is used for lease renewal
+.RE
+.PP
\fIstatus\fR
.RS 4
result of last operation
.RE
.PP
-\fIprot\fR
+\fIvalid\fR
.RS 4
-transfer protocol
+fattr\->valid, indicates which fields are valid
.RE
.PP
\fIcount\fR
number of bytes written
.RE
.PP
-\fIserver_ip\fR
-.RS 4
-IP address of server
-.RE
-.PP
-\fIvalid\fR
+\fIprot\fR
.RS 4
-fattr\->valid, indicates which fields are valid
+transfer protocol
.RE
.PP
-\fItimestamp\fR
+\fIserver_ip\fR
.RS 4
-V4 timestamp, which is used for lease renewal
+IP address of server
.RE
.PP
\fIversion\fR
IP address of server
.RE
.PP
-\fIhow\fR
+\fIprot\fR
.RS 4
-used to set args\&.stable\&. The stable value could be: NFS_UNSTABLE,NFS_DATA_SYNC,NFS_FILE_SYNC (in nfs\&.proc3\&.write_setup and nfs\&.proc4\&.write_setup)
+transfer protocol
.RE
.PP
-\fIoffset\fR
+\fIbitmask1\fR
.RS 4
-the file offset
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.PP
-\fIsize\fR
+\fIcount\fR
.RS 4
bytes written in this execution
.RE
.PP
-\fIbitmask0\fR
+\fIsize\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+bytes written in this execution
.RE
.PP
-\fIcount\fR
+\fIhow\fR
.RS 4
-bytes written in this execution
+used to set args\&.stable\&. The stable value could be: NFS_UNSTABLE,NFS_DATA_SYNC,NFS_FILE_SYNC (in nfs\&.proc3\&.write_setup and nfs\&.proc4\&.write_setup)
.RE
.PP
-\fIprot\fR
+\fIbitmask0\fR
.RS 4
-transfer protocol
+V4 bitmask representing the set of attributes supported on this filesystem
.RE
.PP
-\fIbitmask1\fR
+\fIoffset\fR
.RS 4
-V4 bitmask representing the set of attributes supported on this filesystem
+the file offset
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIsize\fR
+\fIfh\fR
.RS 4
-read bytes
+file handle (the first part is the length of the file handle)
.RE
.PP
-\fIcount\fR
+\fIclient_ip\fR
.RS 4
-read bytes
+the ip address of client
.RE
.PP
-\fIflag\fR
+\fIoffset\fR
.RS 4
-indicates whether this execution is a sync operation
+the offset of file
.RE
.PP
-\fIoffset\fR
+\fIflag\fR
.RS 4
-the offset of file
+indicates whether this execution is a sync operation
.RE
.PP
-\fIclient_ip\fR
+\fIcount\fR
.RS 4
-the ip address of client
+read bytes
.RE
.PP
-\fIfh\fR
+\fIsize\fR
.RS 4
-file handle (the first part is the length of the file handle)
+read bytes
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIiap_valid\fR
+\fIfilelen\fR
.RS 4
-Attribute flags
+the length of file name
.RE
.PP
\fItype\fR
file type(regular,dir,device,fifo \&.\&.\&.)
.RE
.PP
-\fIclient_ip\fR
+\fIiap_valid\fR
.RS 4
-the ip address of client
+Attribute flags
+.RE
+.PP
+\fIiap_mode\fR
+.RS 4
+file access mode
.RE
.PP
\fIfilename\fR
file handle (the first part is the length of the file handle)
.RE
.PP
-\fIfilelen\fR
-.RS 4
-the length of file name
-.RE
-.PP
-\fIiap_mode\fR
+\fIclient_ip\fR
.RS 4
-file access mode
+the ip address of client
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
+\fIfilelen\fR
+.RS 4
+the length of file name
+.RE
+.PP
\fIiap_valid\fR
.RS 4
Attribute flags
.RE
.PP
-\fIcreatemode\fR
+\fIiap_mode\fR
.RS 4
-create mode \&.The possible values could be: NFS3_CREATE_EXCLUSIVE, NFS3_CREATE_UNCHECKED, or NFS3_CREATE_GUARDED
+file access mode
.RE
.PP
\fIfilename\fR
file name
.RE
.PP
-\fIclient_ip\fR
-.RS 4
-the ip address of client
-.RE
-.PP
\fIverifier\fR
.RS 4
file attributes (atime,mtime,mode)\&. It\*(Aqs used to reset file attributes for CREATE_EXCLUSIVE
.RE
.PP
-\fIiap_mode\fR
+\fIfh\fR
.RS 4
-file access mode
+file handle (the first part is the length of the file handle)
.RE
.PP
-\fIfilelen\fR
+\fIclient_ip\fR
.RS 4
-the length of file name
+the ip address of client
.RE
.PP
-\fIfh\fR
+\fItruncp\fR
.RS 4
-file handle (the first part is the length of the file handle)
+trunp arguments, indicates if the file shouldbe truncate
.RE
.PP
-\fItruncp\fR
+\fIcreatemode\fR
.RS 4
-trunp arguments, indicates if the file shouldbe truncate
+create mode \&.The possible values could be: NFS3_CREATE_EXCLUSIVE, NFS3_CREATE_UNCHECKED, or NFS3_CREATE_GUARDED
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIprog\fR
-.RS 4
-program number
-.RE
-.PP
-\fIproto\fR
-.RS 4
-transfer protocol
-.RE
-.PP
\fIproc\fR
.RS 4
procedure number
the ip address of client
.RE
.PP
+\fIxid\fR
+.RS 4
+transmission id
+.RE
+.PP
\fIversion\fR
.RS 4
nfs version
.RE
.PP
-\fIxid\fR
+\fIprog\fR
.RS 4
-transmission id
+program number
+.RE
+.PP
+\fIproto\fR
+.RS 4
+transfer protocol
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIfh\fR
+\fIfilename\fR
.RS 4
-file handle of parent dir(the first part is the length of the file handle)
+file name
.RE
.PP
\fIfilelen\fR
the length of file name
.RE
.PP
-\fIfilename\fR
+\fIclient_ip\fR
.RS 4
-file name
+the ip address of client
.RE
.PP
-\fIclient_ip\fR
+\fIfh\fR
.RS 4
-the ip address of client
+file handle of parent dir(the first part is the length of the file handle)
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIclient_ip\fR
+\fIfh\fR
.RS 4
-the ip address of client
+file handle (the first part is the length of the file handle)
.RE
.PP
-\fIfh\fR
+\fIclient_ip\fR
.RS 4
-file handle (the first part is the length of the file handle)
+the ip address of client
.RE
.PP
\fIaccess\fR
file handle (the first part is the length of the file handle)
.RE
.PP
-\fIgid\fR
-.RS 4
-requester\*(Aqs group id
-.RE
-.PP
-\fIproto\fR
+\fIclient_ip\fR
.RS 4
-transfer protocol
+the ip address of client
.RE
.PP
-\fIuid\fR
+\fIgid\fR
.RS 4
-requester\*(Aqs user id
+requester\*(Aqs group id
.RE
.PP
-\fIclient_ip\fR
+\fIversion\fR
.RS 4
-the ip address of client
+nfs version
.RE
.PP
\fIoffset\fR
the offset of file
.RE
.PP
-\fIversion\fR
+\fIsize\fR
.RS 4
-nfs version
+read bytes
.RE
.PP
\fIcount\fR
read bytes
.RE
.PP
-\fIsize\fR
+\fIuid\fR
.RS 4
-read bytes
+requester\*(Aqs user id
+.RE
+.PP
+\fIproto\fR
+.RS 4
+transfer protocol
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIproto\fR
-.RS 4
-transfer protocol
-.RE
-.PP
-\fIfilelen\fR
+\fIversion\fR
.RS 4
-length of file name
+nfs version
.RE
.PP
\fIgid\fR
file handle (the first part is the length of the file handle)
.RE
.PP
-\fIuid\fR
+\fIclient_ip\fR
.RS 4
-requester\*(Aqs user id
+the ip address of client
+.RE
+.PP
+\fIproto\fR
+.RS 4
+transfer protocol
.RE
.PP
\fIfilename\fR
file name
.RE
.PP
-\fIclient_ip\fR
+\fIuid\fR
.RS 4
-the ip address of client
+requester\*(Aqs user id
.RE
.PP
-\fIversion\fR
+\fIfilelen\fR
.RS 4
-nfs version
+length of file name
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
+\fIfilename\fR
+.RS 4
+file name
+.RE
+.PP
\fIuid\fR
.RS 4
requester\*(Aqs user id
transfer protocol
.RE
.PP
-\fIgid\fR
-.RS 4
-requester\*(Aqs group id
-.RE
-.PP
\fIfilelen\fR
.RS 4
the length of file name
.RE
.PP
-\fIfh\fR
+\fIversion\fR
.RS 4
-file handle of parent dir (the first part is the length of the file handle)
+nfs version
.RE
.PP
-\fIversion\fR
+\fIclient_ip\fR
.RS 4
-nfs version
+the ip address of client
.RE
.PP
-\fIfilename\fR
+\fIfh\fR
.RS 4
-file name
+file handle of parent dir (the first part is the length of the file handle)
.RE
.PP
-\fIclient_ip\fR
+\fIgid\fR
.RS 4
-the ip address of client
+requester\*(Aqs group id
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIversion\fR
+\fIvec\fR
.RS 4
-nfs version
+struct kvec, includes buf address in kernel address and length of each buffer
.RE
.PP
-\fIoffset\fR
+\fIsize\fR
.RS 4
-the offset of file
+read bytes
.RE
.PP
-\fIclient_ip\fR
+\fIcount\fR
.RS 4
-the ip address of client
+read bytes
.RE
.PP
\fIuid\fR
requester\*(Aqs user id
.RE
.PP
-\fIgid\fR
+\fIproto\fR
.RS 4
-requester\*(Aqs group id
+transfer protocol
.RE
.PP
\fIfh\fR
file handle (the first part is the length of the file handle)
.RE
.PP
-\fIvec\fR
+\fIvlen\fR
.RS 4
-struct kvec, includes buf address in kernel address and length of each buffer
+read blocks
.RE
.PP
-\fIproto\fR
+\fIclient_ip\fR
.RS 4
-transfer protocol
+the ip address of client
.RE
.PP
-\fIsize\fR
+\fIgid\fR
.RS 4
-read bytes
+requester\*(Aqs group id
.RE
.PP
-\fIcount\fR
+\fIoffset\fR
.RS 4
-read bytes
+the offset of file
.RE
.PP
-\fIvlen\fR
+\fIversion\fR
.RS 4
-read blocks
+nfs version
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIuid\fR
-.RS 4
-requester\*(Aqs user id
-.RE
-.PP
\fIproto\fR
.RS 4
transfer protocol
.RE
.PP
-\fIgid\fR
+\fIfilename\fR
.RS 4
-requester\*(Aqs group id
+file name
.RE
.PP
-\fIfh\fR
+\fIuid\fR
.RS 4
-file handle (the first part is the length of the file handle)
+requester\*(Aqs user id
.RE
.PP
\fIfilelen\fR
nfs version
.RE
.PP
-\fIfilename\fR
+\fIgid\fR
.RS 4
-file name
+requester\*(Aqs group id
.RE
.PP
\fIclient_ip\fR
.RS 4
the ip address of client
.RE
+.PP
+\fIfh\fR
+.RS 4
+file handle (the first part is the length of the file handle)
+.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fItfh\fR
+\fIuid\fR
.RS 4
-file handler of new path
+requester\*(Aqs user id
.RE
.PP
-\fIclient_ip\fR
+\fIfilename\fR
.RS 4
-the ip address of client
+old file name
.RE
.PP
-\fIfilename\fR
+\fItfh\fR
.RS 4
-old file name
+file handler of new path
.RE
.PP
\fItlen\fR
length of new file name
.RE
.PP
-\fIuid\fR
+\fItname\fR
.RS 4
-requester\*(Aqs user id
+new file name
.RE
.PP
-\fIgid\fR
+\fIflen\fR
.RS 4
-requester\*(Aqs group id
+length of old file name
.RE
.PP
\fIfh\fR
file handler of old path
.RE
.PP
-\fIflen\fR
+\fIclient_ip\fR
.RS 4
-length of old file name
+the ip address of client
.RE
.PP
-\fItname\fR
+\fIgid\fR
.RS 4
-new file name
+requester\*(Aqs group id
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIcount\fR
+\fIgid\fR
.RS 4
-read bytes
+requester\*(Aqs group id
.RE
.PP
\fIvlen\fR
read blocks
.RE
.PP
-\fIstable\fR
+\fIclient_ip\fR
.RS 4
-argp\->stable
+the ip address of client
.RE
.PP
-\fIsize\fR
+\fIfh\fR
.RS 4
-read bytes
+file handle (the first part is the length of the file handle)
.RE
.PP
-\fIuid\fR
+\fIversion\fR
.RS 4
-requester\*(Aqs user id
+nfs version
.RE
.PP
-\fIproto\fR
+\fIoffset\fR
.RS 4
-transfer protocol
+the offset of file
.RE
.PP
\fIvec\fR
struct kvec, includes buf address in kernel address and length of each buffer
.RE
.PP
-\fIgid\fR
+\fIproto\fR
.RS 4
-requester\*(Aqs group id
+transfer protocol
.RE
.PP
-\fIfh\fR
+\fIstable\fR
.RS 4
-file handle (the first part is the length of the file handle)
+argp\->stable
.RE
.PP
-\fIoffset\fR
+\fIuid\fR
.RS 4
-the offset of file
+requester\*(Aqs user id
.RE
.PP
-\fIversion\fR
+\fIcount\fR
.RS 4
-nfs version
+read bytes
.RE
.PP
-\fIclient_ip\fR
+\fIsize\fR
.RS 4
-the ip address of client
+read bytes
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile\fR
+\fIoffset\fR
.RS 4
-argument file, indicates if the file has been opened\&.
+the offset of file
.RE
.PP
-\fIvec\fR
+\fIfile\fR
.RS 4
-struct kvec, includes buf address in kernel address and length of each buffer
+argument file, indicates if the file has been opened\&.
.RE
.PP
-\fIfh\fR
+\fIvlen\fR
.RS 4
-file handle (the first part is the length of the file handle)
+read blocks
.RE
.PP
-\fIoffset\fR
+\fIclient_ip\fR
.RS 4
-the offset of file
+the ip address of client
.RE
.PP
-\fIclient_ip\fR
+\fIfh\fR
.RS 4
-the ip address of client
+file handle (the first part is the length of the file handle)
.RE
.PP
\fIcount\fR
read bytes
.RE
.PP
-\fIvlen\fR
+\fIsize\fR
.RS 4
-read blocks
+read bytes
.RE
.PP
-\fIsize\fR
+\fIvec\fR
.RS 4
-read bytes
+struct kvec, includes buf address in kernel address and length of each buffer
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIflen\fR
+\fItfh\fR
.RS 4
-length of old file name
+file handler of new path
.RE
.PP
-\fItname\fR
+\fItlen\fR
.RS 4
-new file name
+length of new file name
.RE
.PP
-\fIfh\fR
+\fIfilename\fR
.RS 4
-file handler of old path
+old file name
.RE
.PP
-\fItfh\fR
+\fIflen\fR
.RS 4
-file handler of new path
+length of old file name
.RE
.PP
-\fIclient_ip\fR
+\fItname\fR
.RS 4
-the ip address of client
+new file name
.RE
.PP
-\fItlen\fR
+\fIclient_ip\fR
.RS 4
-length of new file name
+the ip address of client
.RE
.PP
-\fIfilename\fR
+\fIfh\fR
.RS 4
-old file name
+file handler of old path
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fItype\fR
+\fIfilelen\fR
.RS 4
-file type (file or dir)
+the length of file name
.RE
.PP
-\fIclient_ip\fR
+\fItype\fR
.RS 4
-the ip address of client
+file type (file or dir)
.RE
.PP
\fIfilename\fR
file name
.RE
.PP
-\fIfilelen\fR
+\fIclient_ip\fR
.RS 4
-the length of file name
+the ip address of client
.RE
.PP
\fIfh\fR
.fi
.SH "VALUES"
.PP
-\fIsize\fR
+\fIvec\fR
.RS 4
-read bytes
+struct kvec, includes buf address in kernel address and length of each buffer
.RE
.PP
-\fIvlen\fR
+\fIcount\fR
.RS 4
-read blocks
+read bytes
.RE
.PP
-\fIcount\fR
+\fIsize\fR
.RS 4
read bytes
.RE
the ip address of client
.RE
.PP
-\fIoffset\fR
+\fIvlen\fR
.RS 4
-the offset of file
+read blocks
.RE
.PP
\fIfh\fR
file handle (the first part is the length of the file handle)
.RE
.PP
-\fIvec\fR
+\fIfile\fR
.RS 4
-struct kvec, includes buf address in kernel address and length of each buffer
+argument file, indicates if the file has been opened\&.
.RE
.PP
-\fIfile\fR
+\fIoffset\fR
.RS 4
-argument file, indicates if the file has been opened\&.
+the offset of file
.RE
.SH SEE ALSO\n
.IR tapset::nfsd (3stap)
.fi
.SH "VALUES"
.PP
-\fIidle\fR
+\fItask_prev\fR
.RS 4
-boolean indicating whether current is the idle process
+the process leaving the cpu (same as current)
.RE
.PP
\fIname\fR
the process replacing current
.RE
.PP
-\fItask_prev\fR
+\fIidle\fR
.RS 4
-the process leaving the cpu (same as current)
+boolean indicating whether current is the idle process
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIidle\fR
-.RS 4
-\- boolean indicating whether current is the idle process
-.RE
-.PP
\fIname\fR
.RS 4
name of the probe point
.RS 4
the process that was previously running on this cpu
.RE
+.PP
+\fIidle\fR
+.RS 4
+\- boolean indicating whether current is the idle process
+.RE
.SH "CONTEXT"
.PP
The resuming process\&.
.fi
.SH "VALUES"
.PP
-\fIprev_priority\fR
+\fIprevtsk_state\fR
.RS 4
-The priority of the process to be switched out
+the state of the process to be switched out
.RE
.PP
-\fInext_pid\fR
+\fIprev_tid\fR
.RS 4
-The PID of the process to be switched in
+The TID of the process to be switched out
.RE
.PP
-\fIprevtsk_state\fR
+\fInext_task_name\fR
.RS 4
-the state of the process to be switched out
+The name of the process to be switched in
.RE
.PP
-\fIprev_pid\fR
+\fInext_pid\fR
.RS 4
-The PID of the process to be switched out
+The PID of the process to be switched in
.RE
.PP
-\fInext_task_name\fR
+\fInexttsk_state\fR
.RS 4
-The name of the process to be switched in
+the state of the process to be switched in
.RE
.PP
-\fInext_tid\fR
+\fIprev_pid\fR
.RS 4
-The TID of the process to be switched in
+The PID of the process to be switched out
.RE
.PP
-\fIname\fR
+\fIprev_priority\fR
.RS 4
-name of the probe point
+The priority of the process to be switched out
.RE
.PP
-\fIprev_tid\fR
+\fIprev_task_name\fR
.RS 4
-The TID of the process to be switched out
+The name of the process to be switched out
.RE
.PP
-\fInext_priority\fR
+\fInext_tid\fR
.RS 4
-The priority of the process to be switched in
+The TID of the process to be switched in
.RE
.PP
-\fInexttsk_state\fR
+\fInext_priority\fR
.RS 4
-the state of the process to be switched in
+The priority of the process to be switched in
.RE
.PP
-\fIprev_task_name\fR
+\fIname\fR
.RS 4
-The name of the process to be switched out
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIreturn_value\fR
.RS 4
-name of the probe point
+return value after stopping the thread
.RE
.PP
-\fIreturn_value\fR
+\fIname\fR
.RS 4
-return value after stopping the thread
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIcpu_to\fR
+\fIname\fR
.RS 4
-the destination cpu
+name of the probe point
+.RE
+.PP
+\fIpid\fR
+.RS 4
+PID of the task being migrated
.RE
.PP
\fItask\fR
the original cpu
.RE
.PP
-\fIpid\fR
-.RS 4
-PID of the task being migrated
-.RE
-.PP
\fIpriority\fR
.RS 4
priority of the task being migrated
.RE
.PP
-\fIname\fR
+\fIcpu_to\fR
.RS 4
-name of the probe point
+the destination cpu
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIpid\fR
+\fIpriority\fR
.RS 4
-PID of the process exiting
+priority of the process exiting
.RE
.PP
-\fIpriority\fR
+\fIpid\fR
.RS 4
-priority of the process exiting
+PID of the process exiting
.RE
.PP
\fIname\fR
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIparent_pid\fR
.RS 4
-name of the probe point
+PID of the parent process
.RE
.PP
\fIchild_pid\fR
PID of the child process
.RE
.PP
-\fIparent_pid\fR
+\fIname\fR
.RS 4
-PID of the parent process
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIpid\fR
-.RS 4
-PID of the process getting freed
-.RE
-.PP
\fIpriority\fR
.RS 4
priority of the process getting freed
.RS 4
name of the probe point
.RE
+.PP
+\fIpid\fR
+.RS 4
+PID of the process getting freed
+.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIsignal_number\fR
+\fIpid\fR
.RS 4
-signal number
+pid of the process sending signal
.RE
.PP
\fIname\fR
name of the probe point
.RE
.PP
-\fIpid\fR
+\fIsignal_number\fR
.RS 4
-pid of the process sending signal
+signal number
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fItask_priority\fR
.RS 4
-name of the probe point
+priority of the task
.RE
.PP
\fItask_pid\fR
PID of the task the scheduler is waiting on
.RE
.PP
-\fItask_priority\fR
+\fIname\fR
.RS 4
-priority of the task
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fItask_state\fR
+\fItask_priority\fR
.RS 4
-state of the task being woken up
+priority of the task being woken up
.RE
.PP
-\fIname\fR
+\fItask_cpu\fR
.RS 4
-name of the probe point
+cpu of the task being woken up
.RE
.PP
\fItask_pid\fR
PID of the task being woken up
.RE
.PP
-\fItask_priority\fR
+\fItask_state\fR
.RS 4
-priority of the task being woken up
+state of the task being woken up
.RE
.PP
-\fItask_cpu\fR
+\fIname\fR
.RS 4
-cpu of the task being woken up
+name of the probe point
.RE
.PP
\fItask_tid\fR
priority of the new task
.RE
.PP
-\fItask_tid\fR
-.RS 4
-TID of the new task woken up
-.RE
-.PP
\fItask_cpu\fR
.RS 4
cpu of the task woken up
PID of the new task woken up
.RE
.PP
+\fItask_state\fR
+.RS 4
+state of the task woken up
+.RE
+.PP
\fIname\fR
.RS 4
name of the probe point
.RE
.PP
-\fItask_state\fR
+\fItask_tid\fR
.RS 4
-state of the task woken up
+TID of the new task woken up
.RE
.SH SEE ALSO\n
.IR tapset::scheduler (3stap)
.fi
.SH "VALUES"
.PP
-\fIhost_no\fR
-.RS 4
-The host number
-.RE
-.PP
-\fIdev_id\fR
+\fIreq_addr\fR
.RS 4
-The scsi device id
+The current struct request pointer, as a number
.RE
.PP
\fIgoodbytes\fR
The bytes completed
.RE
.PP
-\fIdevice_state\fR
+\fIdevice_state_str\fR
.RS 4
-The current state of the device
+The current state of the device, as a string
.RE
.PP
-\fIlun\fR
+\fIhost_no\fR
.RS 4
-The lun number
+The host number
.RE
.PP
\fIchannel\fR
The channel number
.RE
.PP
-\fIdevice_state_str\fR
+\fIdev_id\fR
.RS 4
-The current state of the device, as a string
+The scsi device id
.RE
.PP
\fIdata_direction\fR
Data direction, as a string
.RE
.PP
-\fIreq_addr\fR
+\fIdevice_state\fR
.RS 4
-The current struct request pointer, as a number
+The current state of the device
+.RE
+.PP
+\fIlun\fR
+.RS 4
+The lun number
.RE
.SH SEE ALSO\n
.IR tapset::scsi (3stap)
.fi
.SH "VALUES"
.PP
-\fIchannel\fR
+\fIdev_id\fR
.RS 4
-The channel number
+The scsi device id
.RE
.PP
-\fIlun\fR
+\fIdata_direction\fR
.RS 4
-The lun number
+The data_direction specifies whether this command is from/to the device 0 (DMA_BIDIRECTIONAL), 1 (DMA_TO_DEVICE), 2 (DMA_FROM_DEVICE), 3 (DMA_NONE)
.RE
.PP
-\fIdevice_state\fR
+\fIhost_no\fR
.RS 4
-The current state of the device
+The host number
.RE
.PP
-\fIdev_id\fR
+\fIrequest_buffer\fR
.RS 4
-The scsi device id
+The request buffer address
.RE
.PP
-\fIhost_no\fR
+\fIchannel\fR
.RS 4
-The host number
+The channel number
.RE
.PP
-\fIreq_addr\fR
+\fIdevice_state_str\fR
.RS 4
-The current struct request pointer, as a number
+The current state of the device, as a string
.RE
.PP
-\fIdata_direction\fR
+\fIreq_addr\fR
.RS 4
-The data_direction specifies whether this command is from/to the device 0 (DMA_BIDIRECTIONAL), 1 (DMA_TO_DEVICE), 2 (DMA_FROM_DEVICE), 3 (DMA_NONE)
+The current struct request pointer, as a number
.RE
.PP
-\fIdata_direction_str\fR
+\fIrequest_bufflen\fR
.RS 4
-Data direction, as a string
+The request buffer length
.RE
.PP
-\fIrequest_bufflen\fR
+\fIlun\fR
.RS 4
-The request buffer length
+The lun number
.RE
.PP
-\fIdevice_state_str\fR
+\fIdevice_state\fR
.RS 4
-The current state of the device, as a string
+The current state of the device
.RE
.PP
-\fIrequest_buffer\fR
+\fIdata_direction_str\fR
.RS 4
-The request buffer address
+Data direction, as a string
.RE
.SH SEE ALSO\n
.IR tapset::scsi (3stap)
.fi
.SH "VALUES"
.PP
-\fIdevice_state\fR
-.RS 4
-The current state of the device
-.RE
-.PP
-\fIlun\fR
+\fIhost_no\fR
.RS 4
-The lun number
+The host number
.RE
.PP
-\fIhost_no\fR
+\fIchannel\fR
.RS 4
-The host number
+The channel number
.RE
.PP
\fIdev_id\fR
1 if a timer is pending on this request
.RE
.PP
-\fIchannel\fR
+\fIdata_direction\fR
.RS 4
-The channel number
+The data_direction specifies whether this command is from/to the device\&.
+.RE
+.PP
+\fIreq_addr\fR
+.RS 4
+The current struct request pointer, as a number
.RE
.PP
\fIdevice_state_str\fR
The current state of the device, as a string
.RE
.PP
-\fIreq_addr\fR
+\fIdata_direction_str\fR
.RS 4
-The current struct request pointer, as a number
+Data direction, as a string
.RE
.PP
-\fIdata_direction\fR
+\fIlun\fR
.RS 4
-The data_direction specifies whether this command is from/to the device\&.
+The lun number
.RE
.PP
-\fIdata_direction_str\fR
+\fIdevice_state\fR
.RS 4
-Data direction, as a string
+The current state of the device
.RE
.SH SEE ALSO\n
.IR tapset::scsi (3stap)
.fi
.SH "VALUES"
.PP
-\fIdisk_minor\fR
-.RS 4
-The minor number of the disk (\-1 if no information)
-.RE
-.PP
-\fIreq_addr\fR
-.RS 4
-The current struct request pointer, as a number
-.RE
-.PP
\fIdisk_major\fR
.RS 4
The major number of the disk (\-1 if no information)
.RS 4
The current state of the device
.RE
+.PP
+\fIdisk_minor\fR
+.RS 4
+The minor number of the disk (\-1 if no information)
+.RE
+.PP
+\fIreq_addr\fR
+.RS 4
+The current struct request pointer, as a number
+.RE
.SH SEE ALSO\n
.IR tapset::scsi (3stap)
.fi
.SH "VALUES"
.PP
-\fIdata_direction\fR
-.RS 4
-The data_direction specifies whether this command is from/to the device\&.
-.RE
-.PP
-\fIdata_direction_str\fR
-.RS 4
-Data direction, as a string
-.RE
-.PP
-\fIdevice_state_str\fR
-.RS 4
-The current state of the device, as a string
-.RE
-.PP
\fIrequest_bufflen\fR
.RS 4
The data buffer buffer length
.RE
.PP
-\fIrequest_buffer\fR
+\fIretries\fR
.RS 4
-The data buffer address
+Number of times to retry request
.RE
.PP
-\fIretries\fR
+\fItimeout\fR
.RS 4
-Number of times to retry request
+Request timeout in seconds
.RE
.PP
-\fIchannel\fR
+\fIdata_direction_str\fR
.RS 4
-The channel number
+Data direction, as a string
.RE
.PP
\fIdevice_state\fR
The lun number
.RE
.PP
-\fItimeout\fR
+\fIrequest_buffer\fR
.RS 4
-Request timeout in seconds
+The data buffer address
.RE
.PP
\fIhost_no\fR
The host number
.RE
.PP
+\fIchannel\fR
+.RS 4
+The channel number
+.RE
+.PP
\fIdev_id\fR
.RS 4
The scsi device id
.RE
+.PP
+\fIdata_direction\fR
+.RS 4
+The data_direction specifies whether this command is from/to the device\&.
+.RE
+.PP
+\fIdevice_state_str\fR
+.RS 4
+The current state of the device, as a string
+.RE
.SH SEE ALSO\n
.IR tapset::scsi (3stap)
.fi
.SH "VALUES"
.PP
-\fIstate_str\fR
+\fIold_state\fR
.RS 4
-The new state of the device, as a string
+The current state of the device
.RE
.PP
-\fIstate\fR
+\fIlun\fR
.RS 4
-The new state of the device
+The lun number
.RE
.PP
-\fIold_state_str\fR
+\fIchannel\fR
.RS 4
-The current state of the device, as a string
+The channel number
.RE
.PP
-\fIchannel\fR
+\fIhost_no\fR
.RS 4
-The channel number
+The host number
.RE
.PP
-\fIlun\fR
+\fIstate_str\fR
.RS 4
-The lun number
+The new state of the device, as a string
.RE
.PP
-\fIhost_no\fR
+\fIstate\fR
.RS 4
-The host number
+The new state of the device
.RE
.PP
-\fIold_state\fR
+\fIold_state_str\fR
.RS 4
-The current state of the device
+The current state of the device, as a string
.RE
.PP
\fIdev_id\fR
.fi
.SH "VALUES"
.PP
-\fIsig_pid\fR
+\fIsig_name\fR
.RS 4
-The PID of the process receiving the signal
+A string representation of the signal
.RE
.PP
-\fIpid_name\fR
+\fIsig\fR
.RS 4
-Name of the process receiving the signal
+The number of the signal
.RE
.PP
-\fIsig_name\fR
+\fIpid_name\fR
.RS 4
-A string representation of the signal
+Name of the process receiving the signal
.RE
.PP
-\fIsig\fR
+\fIsig_pid\fR
.RS 4
-The number of the signal
+The PID of the process receiving the signal
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-Return value as a string
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+Return value as a string
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
Name of the probe point
.RE
.PP
-\fIsig_pid\fR
+\fItask\fR
.RS 4
-The PID of the process receiving the signal
+A task handle to the signal recipient
.RE
.PP
-\fIsi_code\fR
+\fIsig_name\fR
.RS 4
-Indicates the signal type
+A string representation of the signal
.RE
.PP
-\fIsinfo\fR
+\fIsig\fR
.RS 4
-The address of the siginfo structure
+The number of the signal
.RE
.PP
-\fIsig\fR
+\fIsinfo\fR
.RS 4
-The number of the signal
+The address of the siginfo structure
.RE
.PP
-\fItask\fR
+\fIsi_code\fR
.RS 4
-A task handle to the signal recipient
+Indicates the signal type
.RE
.PP
-\fIsig_name\fR
+\fIsig_pid\fR
.RS 4
-A string representation of the signal
+The PID of the process receiving the signal
.RE
.PP
\fIpid_name\fR
.fi
.SH "VALUES"
.PP
-\fIsa_handler\fR
+\fIname\fR
.RS 4
-The new handler of the signal
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIsig_name\fR
.RS 4
-Name of the probe point
+A string representation of the signal
.RE
.PP
-\fIsig\fR
+\fIsigact_addr\fR
.RS 4
-The signal to be examined/changed
+The address of the new sigaction struct associated with the signal
.RE
.PP
-\fIsa_mask\fR
+\fIsa_handler\fR
.RS 4
-The new mask of the signal
+The new handler of the signal
.RE
.PP
-\fIoldsigact_addr\fR
+\fIsig\fR
.RS 4
-The address of the old sigaction struct associated with the signal
+The signal to be examined/changed
.RE
.PP
-\fIsigact_addr\fR
+\fIsa_mask\fR
.RS 4
-The address of the new sigaction struct associated with the signal
+The new mask of the signal
.RE
.PP
-\fIsig_name\fR
+\fIoldsigact_addr\fR
.RS 4
-A string representation of the signal
+The address of the old sigaction struct associated with the signal
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fItask\fR
-.RS 4
-The task handler of the process performing the flush
-.RE
-.PP
\fIpid_name\fR
.RS 4
The name of the process associated with the task performing the flush
The PID of the process associated with the task performing the flush
.RE
.PP
+\fItask\fR
+.RS 4
+The task handler of the process performing the flush
+.RE
+.PP
\fIname\fR
.RS 4
Name of the probe point
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIsig_pid\fR
.RS 4
-Name of the probe point
+The PID of the process receiving the signal
.RE
.PP
-\fIsig_pid\fR
+\fIpid_name\fR
.RS 4
-The PID of the process receiving the signal
+Name of the process receiving the signal
.RE
.PP
-\fIsig\fR
+\fIname\fR
.RS 4
-The number of the signal
+Name of the probe point
.RE
.PP
\fIsig_name\fR
A string representation of the signal
.RE
.PP
-\fIpid_name\fR
+\fIsig\fR
.RS 4
-Name of the process receiving the signal
+The number of the signal
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+Return value as a string
.RE
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-Return value as a string
+Name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIka_addr\fR
+\fIsinfo\fR
.RS 4
-The address of the k_sigaction table associated with the signal
+The address of the siginfo table
.RE
.PP
-\fIoldset_addr\fR
+\fIka_addr\fR
.RS 4
-The address of the bitmask array of blocked signals (deprecated in SystemTap 2\&.1)
+The address of the k_sigaction table associated with the signal
.RE
.PP
-\fIsig_mode\fR
+\fIsig_code\fR
.RS 4
-Indicates whether the signal was a user\-mode or kernel\-mode signal
+The si_code value of the siginfo signal
.RE
.PP
\fIname\fR
Name of the probe point
.RE
.PP
-\fIsig_name\fR
+\fIregs\fR
.RS 4
-A string representation of the signal
+The address of the kernel\-mode stack area (deprecated in SystemTap 2\&.1)
.RE
.PP
-\fIsig_code\fR
+\fIsig_mode\fR
.RS 4
-The si_code value of the siginfo signal
+Indicates whether the signal was a user\-mode or kernel\-mode signal
.RE
.PP
-\fIregs\fR
+\fIsig_name\fR
.RS 4
-The address of the kernel\-mode stack area (deprecated in SystemTap 2\&.1)
+A string representation of the signal
.RE
.PP
-\fIsinfo\fR
+\fIsig\fR
.RS 4
-The address of the siginfo table
+The signal number that invoked the signal handler
.RE
.PP
-\fIsig\fR
+\fIoldset_addr\fR
.RS 4
-The signal number that invoked the signal handler
+The address of the bitmask array of blocked signals (deprecated in SystemTap 2\&.1)
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-Return value as a string
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+Return value as a string
.RE
.SH "DESCRIPTION"
.PP
The size of the user\-space signal set
.RE
.PP
-\fIname\fR
+\fIsigset_add\fR
.RS 4
-Name of the probe point
+The address of the user\-space signal set (sigset_t)
.RE
.PP
-\fIsigset_add\fR
+\fIname\fR
.RS 4
-The address of the user\-space signal set (sigset_t)
+Name of the probe point
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+Return value as a string
.RE
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-Return value as a string
+Name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIsigset_addr\fR
.RS 4
-Name of the probe point
+The address of the signal set (sigset_t) to be implemented
.RE
.PP
-\fIoldsigset_addr\fR
+\fIsigset\fR
.RS 4
-The old address of the signal set (sigset_t)
+The actual value to be set for sigset_t (correct?)
.RE
.PP
-\fIsigset_addr\fR
+\fIoldsigset_addr\fR
.RS 4
-The address of the signal set (sigset_t) to be implemented
+The old address of the signal set (sigset_t)
.RE
.PP
-\fIsigset\fR
+\fIname\fR
.RS 4
-The actual value to be set for sigset_t (correct?)
+Name of the probe point
.RE
.PP
\fIhow\fR
.fi
.SH "VALUES"
.PP
-\fIsi_code\fR
+\fIsig\fR
.RS 4
-Indicates the signal type
+The number of the signal
.RE
.PP
-\fIshared\fR
+\fIsig_name\fR
.RS 4
-Indicates whether the signal is shared by the thread group
+A string representation of the signal
.RE
.PP
\fIname\fR
The name of the function used to send out the signal
.RE
.PP
-\fIsig_pid\fR
+\fItask\fR
.RS 4
-The PID of the process receiving the signal
+A task handle to the signal recipient
.RE
.PP
-\fIsig_name\fR
+\fIshared\fR
.RS 4
-A string representation of the signal
+Indicates whether the signal is shared by the thread group
.RE
.PP
\fIpid_name\fR
The name of the signal recipient
.RE
.PP
-\fItask\fR
+\fIsig_pid\fR
.RS 4
-A task handle to the signal recipient
+The PID of the process receiving the signal
.RE
.PP
-\fIsend2queue\fR
+\fIsi_code\fR
.RS 4
-Indicates whether the signal is sent to an existing sigqueue (deprecated in SystemTap 2\&.1)
+Indicates the signal type
.RE
.PP
\fIsinfo\fR
The address of siginfo struct
.RE
.PP
-\fIsig\fR
+\fIsend2queue\fR
.RS 4
-The number of the signal
+Indicates whether the signal is sent to an existing sigqueue (deprecated in SystemTap 2\&.1)
.RE
.SH "CONTEXT"
.PP
The name of the function used to send out the signal
.RE
.PP
-\fIshared\fR
+\fIretstr\fR
.RS 4
-Indicates whether the sent signal is shared by the thread group\&.
+The return value to either __group_send_sig_info, specific_send_sig_info, or send_sigqueue
.RE
.PP
-\fIretstr\fR
+\fIshared\fR
.RS 4
-The return value to either __group_send_sig_info, specific_send_sig_info, or send_sigqueue
+Indicates whether the sent signal is shared by the thread group\&.
.RE
.PP
\fIsend2queue\fR
The PID of the process to which the signal is queued
.RE
.PP
-\fIsigqueue_addr\fR
+\fIpid_name\fR
.RS 4
-The address of the signal queue
+Name of the process to which the signal is queued
.RE
.PP
\fIname\fR
Name of the probe point
.RE
.PP
-\fIsig\fR
+\fIsigqueue_addr\fR
.RS 4
-The queued signal
+The address of the signal queue
.RE
.PP
-\fIpid_name\fR
+\fIsig_name\fR
.RS 4
-Name of the process to which the signal is queued
+A string representation of the signal
.RE
.PP
-\fIsig_name\fR
+\fIsig\fR
.RS 4
-A string representation of the signal
+The queued signal
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-Return value as a string
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+Return value as a string
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fItask\fR
+\fIsig_name\fR
.RS 4
-A task handle to the signal recipient
+A string representation of the signal
.RE
.PP
-\fIsig\fR
+\fIname\fR
.RS 4
-The specific kill signal sent to the process
+Name of the probe point
.RE
.PP
-\fIsig_name\fR
+\fItask\fR
.RS 4
-A string representation of the signal
+A task handle to the signal recipient
.RE
.PP
-\fIpid_name\fR
+\fItgid\fR
.RS 4
-The name of the signal recipient
+The thread group ID of the thread receiving the kill signal
.RE
.PP
-\fIname\fR
+\fIsig\fR
.RS 4
-Name of the probe point
+The specific kill signal sent to the process
.RE
.PP
-\fIsig_pid\fR
+\fIpid_name\fR
.RS 4
-The PID of the thread receiving the kill signal
+The name of the signal recipient
.RE
.PP
-\fItgid\fR
+\fIsig_pid\fR
.RS 4
-The thread group ID of the thread receiving the kill signal
+The PID of the thread receiving the kill signal
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIretstr\fR
+\fIname\fR
.RS 4
-The return value to either __group_send_sig_info,
+Name of the probe point
.RE
.PP
-\fIname\fR
+\fIretstr\fR
.RS 4
-Name of the probe point
+The return value to either __group_send_sig_info,
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIsig\fR
.RS 4
-Name of the probe point
+The specific signal sent to the process
.RE
.PP
-\fIsig_pid\fR
+\fIsig_name\fR
.RS 4
-The PID of the process receiving the kill signal
+A string representation of the signal
.RE
.PP
-\fIpid_name\fR
+\fIname\fR
.RS 4
-The name of the signal recipient
+Name of the probe point
.RE
.PP
-\fIsig_name\fR
+\fItask\fR
.RS 4
-A string representation of the signal
+A task handle to the signal recipient
.RE
.PP
-\fIsig\fR
+\fIpid_name\fR
.RS 4
-The specific signal sent to the process
+The name of the signal recipient
.RE
.PP
-\fItask\fR
+\fIsig_pid\fR
.RS 4
-A task handle to the signal recipient
+The PID of the process receiving the kill signal
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIsig_pid\fR
+\fIsig\fR
.RS 4
-The PID of the process receiving the signal
+The specific signal sent to the process
.RE
.PP
-\fIname\fR
+\fIsig_name\fR
.RS 4
-Name of the probe point
+A string representation of the signal
.RE
.PP
-\fIpid_name\fR
+\fIname\fR
.RS 4
-The name of the signal recipient
+Name of the probe point
.RE
.PP
-\fIsig_name\fR
+\fItask\fR
.RS 4
-A string representation of the signal
+A task handle to the signal recipient
.RE
.PP
-\fItask\fR
+\fIsig_pid\fR
.RS 4
-A task handle to the signal recipient
+The PID of the process receiving the signal
.RE
.PP
-\fIsig\fR
+\fIpid_name\fR
.RS 4
-The specific signal sent to the process
+The name of the signal recipient
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIresume\fR
+\fIstate_mask\fR
.RS 4
-Indicates whether to wake up a task in a STOPPED or TRACED state
+A string representation indicating the mask of task states to wake\&. Possible values are TASK_INTERRUPTIBLE, TASK_STOPPED, TASK_TRACED, TASK_WAKEKILL, and TASK_INTERRUPTIBLE\&.
.RE
.PP
\fIsig_pid\fR
The PID of the process to wake
.RE
.PP
-\fIstate_mask\fR
+\fIpid_name\fR
.RS 4
-A string representation indicating the mask of task states to wake\&. Possible values are TASK_INTERRUPTIBLE, TASK_STOPPED, TASK_TRACED, TASK_WAKEKILL, and TASK_INTERRUPTIBLE\&.
+Name of the process to wake
.RE
.PP
-\fIpid_name\fR
+\fIresume\fR
.RS 4
-Name of the process to wake
+Indicates whether to wake up a task in a STOPPED or TRACED state
.RE
.SH SEE ALSO\n
.IR tapset::signal (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIfamily\fR
.RS 4
-Name of this probe
+Protocol family value
.RE
.PP
-\fIstate\fR
+\fIflags\fR
.RS 4
-Socket state value
+Socket flags value
.RE
.PP
-\fIprotocol\fR
+\fItype\fR
.RS 4
-Protocol value
+Socket type value
.RE
.PP
-\fIfamily\fR
+\fIsize\fR
.RS 4
-Protocol family value
+Message size in bytes
.RE
.PP
-\fIflags\fR
+\fIprotocol\fR
.RS 4
-Socket flags value
+Protocol value
.RE
.PP
-\fIsize\fR
+\fIname\fR
.RS 4
-Message size in bytes
+Name of this probe
.RE
.PP
-\fItype\fR
+\fIstate\fR
.RS 4
-Socket type value
+Socket state value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIflags\fR
+\fIprotocol\fR
.RS 4
-Socket flags value
+Protocol value
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
+.RE
+.PP
+\fIflags\fR
+.RS 4
+Socket flags value
.RE
.PP
\fIsize\fR
Size of message received (in bytes) or error code if success = 0
.RE
.PP
-\fItype\fR
+\fIfamily\fR
.RS 4
-Socket type value
+Protocol family value
.RE
.PP
-\fIname\fR
+\fIsuccess\fR
.RS 4
-Name of this probe
+Was receive successful? (1 = yes, 0 = no)
.RE
.PP
\fIstate\fR
Socket state value
.RE
.PP
-\fIprotocol\fR
-.RS 4
-Protocol value
-.RE
-.PP
-\fIsuccess\fR
+\fIname\fR
.RS 4
-Was receive successful? (1 = yes, 0 = no)
+Name of this probe
.RE
.SH "CONTEXT"
.PP
Socket type value
.RE
.PP
-\fIsize\fR
-.RS 4
-Message size in bytes
-.RE
-.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.PP
\fIflags\fR
Socket flags value
.RE
.PP
-\fIprotocol\fR
+\fIsize\fR
.RS 4
-Protocol value
+Message size in bytes
.RE
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
\fIname\fR
.RS 4
Name of this probe
.RE
+.PP
+\fIstate\fR
+.RS 4
+Socket state value
+.RE
.SH "CONTEXT"
.PP
The message sender
Socket state value
.RE
.PP
-\fIsuccess\fR
+\fIname\fR
.RS 4
-Was receive successful? (1 = yes, 0 = no)
+Name of this probe
.RE
.PP
-\fIprotocol\fR
+\fIfamily\fR
.RS 4
-Protocol value
+Protocol family value
.RE
.PP
-\fIname\fR
+\fIsuccess\fR
.RS 4
-Name of this probe
+Was receive successful? (1 = yes, 0 = no)
.RE
.PP
\fItype\fR
Socket type value
.RE
.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.PP
\fIflags\fR
Name of this probe
.RE
.PP
-\fIprotocol\fR
-.RS 4
-Protocol value
-.RE
-.PP
\fIstate\fR
.RS 4
Socket state value
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
.RE
.PP
\fIflags\fR
Socket flags value
.RE
.PP
-\fItype\fR
+\fIprotocol\fR
.RS 4
-Socket type value
+Protocol value
+.RE
+.PP
+\fIfamily\fR
+.RS 4
+Protocol family value
.RE
.SH "CONTEXT"
.PP
Requested by user process or the kernel (1 = kernel, 0 = user)
.RE
.PP
-\fItype\fR
+\fIname\fR
.RS 4
-Socket type value
+Name of this probe
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
.RE
.PP
\fIprotocol\fR
Protocol value
.RE
.PP
-\fIname\fR
+\fIfamily\fR
.RS 4
-Name of this probe
+Protocol family value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIfamily\fR
+\fIname\fR
.RS 4
-Protocol family value
+Name of this probe
.RE
.PP
-\fItype\fR
+\fIerr\fR
.RS 4
-Socket type value
+Error code if success == 0
.RE
.PP
-\fIname\fR
+\fIrequester\fR
.RS 4
-Name of this probe
+Requested by user process or the kernel (1 = kernel, 0 = user)
.RE
.PP
-\fIprotocol\fR
+\fIfamily\fR
.RS 4
-Protocol value
+Protocol family value
.RE
.PP
\fIsuccess\fR
Was socket creation successful? (1 = yes, 0 = no)
.RE
.PP
-\fIrequester\fR
+\fIprotocol\fR
.RS 4
-Requested by user process or the kernel (1 = kernel, 0 = user)
+Protocol value
.RE
.PP
-\fIerr\fR
+\fItype\fR
.RS 4
-Error code if success == 0
+Socket type value
.RE
.SH "CONTEXT"
.PP
Socket type value
.RE
.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.PP
\fIflags\fR
Message size in bytes
.RE
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
-\fIprotocol\fR
+\fIname\fR
.RS 4
-Protocol value
+Name of this probe
.RE
.PP
-\fIname\fR
+\fIstate\fR
.RS 4
-Name of this probe
+Socket state value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
-.RS 4
-Name of this probe
-.RE
-.PP
\fIstate\fR
.RS 4
Socket state value
.RE
.PP
-\fIprotocol\fR
+\fIname\fR
.RS 4
-Protocol value
+Name of this probe
.RE
.PP
-\fIsuccess\fR
+\fIflags\fR
.RS 4
-Was receive successful? (1 = yes, 0 = no)
+Socket flags value
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
.RE
.PP
-\fIflags\fR
+\fIprotocol\fR
.RS 4
-Socket flags value
+Protocol value
.RE
.PP
\fIsize\fR
Size of message received (in bytes) or error code if success = 0
.RE
.PP
-\fItype\fR
+\fIfamily\fR
.RS 4
-Socket type value
+Protocol family value
+.RE
+.PP
+\fIsuccess\fR
+.RS 4
+Was receive successful? (1 = yes, 0 = no)
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIflags\fR
.RS 4
-Name of this probe
+Socket flags value
.RE
.PP
-\fIstate\fR
+\fItype\fR
.RS 4
-Socket state value
+Socket type value
+.RE
+.PP
+\fIsize\fR
+.RS 4
+Message size in bytes
.RE
.PP
\fIprotocol\fR
Protocol family value
.RE
.PP
-\fIflags\fR
-.RS 4
-Socket flags value
-.RE
-.PP
-\fIsize\fR
+\fIstate\fR
.RS 4
-Message size in bytes
+Socket state value
.RE
.PP
-\fItype\fR
+\fIname\fR
.RS 4
-Socket type value
+Name of this probe
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
\fIsuccess\fR
Was receive successful? (1 = yes, 0 = no)
.RE
.PP
-\fIprotocol\fR
+\fItype\fR
.RS 4
-Protocol value
+Socket type value
.RE
.PP
-\fIname\fR
+\fIflags\fR
.RS 4
-Name of this probe
+Socket flags value
.RE
.PP
-\fItype\fR
+\fIsize\fR
.RS 4
-Socket type value
+Size of message received (in bytes) or error code if success = 0
.RE
.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.PP
-\fIflags\fR
+\fIname\fR
.RS 4
-Socket flags value
+Name of this probe
.RE
.PP
-\fIsize\fR
+\fIstate\fR
.RS 4
-Size of message received (in bytes) or error code if success = 0
+Socket state value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsuccess\fR
+\fIname\fR
.RS 4
-Was send successful? (1 = yes, 0 = no)
+Name of this probe
.RE
.PP
-\fIprotocol\fR
+\fIstate\fR
.RS 4
-Protocol value
+Socket state value
.RE
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
-\fIname\fR
+\fIsuccess\fR
.RS 4
-Name of this probe
+Was send successful? (1 = yes, 0 = no)
.RE
.PP
\fItype\fR
Socket flags value
.RE
.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fItype\fR
+\fIflags\fR
.RS 4
-Socket type value
+Socket flags value
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
.RE
.PP
-\fIflags\fR
+\fIprotocol\fR
.RS 4
-Socket flags value
+Protocol value
.RE
.PP
\fIsize\fR
Message size in bytes
.RE
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
-\fIprotocol\fR
+\fIstate\fR
.RS 4
-Protocol value
+Socket state value
.RE
.PP
\fIname\fR
.fi
.SH "VALUES"
.PP
-\fItype\fR
+\fIname\fR
.RS 4
-Socket type value
+Name of this probe
.RE
.PP
-\fIfamily\fR
+\fIstate\fR
.RS 4
-Protocol family value
+Socket state value
.RE
.PP
-\fIflags\fR
+\fIsuccess\fR
.RS 4
-Socket flags value
+Was receive successful? (1 = yes, 0 = no)
.RE
.PP
-\fIsize\fR
+\fIfamily\fR
.RS 4
-Size of message received (in bytes) or error code if success = 0
+Protocol family value
.RE
.PP
-\fIstate\fR
+\fIflags\fR
.RS 4
-Socket state value
+Socket flags value
.RE
.PP
-\fIsuccess\fR
+\fItype\fR
.RS 4
-Was receive successful? (1 = yes, 0 = no)
+Socket type value
.RE
.PP
-\fIprotocol\fR
+\fIsize\fR
.RS 4
-Protocol value
+Size of message received (in bytes) or error code if success = 0
.RE
.PP
-\fIname\fR
+\fIprotocol\fR
.RS 4
-Name of this probe
+Protocol value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsize\fR
+\fIfamily\fR
.RS 4
-Size of message sent (in bytes) or error code if success = 0
+Protocol family value
.RE
.PP
-\fIfamily\fR
+\fIsuccess\fR
.RS 4
-Protocol family value
+Was send successful? (1 = yes, 0 = no)
.RE
.PP
\fIflags\fR
Socket type value
.RE
.PP
-\fIname\fR
+\fIsize\fR
.RS 4
-Name of this probe
+Size of message sent (in bytes) or error code if success = 0
.RE
.PP
-\fIsuccess\fR
+\fIprotocol\fR
.RS 4
-Was send successful? (1 = yes, 0 = no)
+Protocol value
.RE
.PP
-\fIprotocol\fR
+\fIname\fR
.RS 4
-Protocol value
+Name of this probe
.RE
.PP
\fIstate\fR
.fi
.SH "VALUES"
.PP
-\fIstate\fR
+\fItype\fR
.RS 4
-Socket state value
+Socket type value
.RE
.PP
-\fIprotocol\fR
+\fIsize\fR
.RS 4
-Protocol value
+Message size in bytes
.RE
.PP
-\fIname\fR
+\fIflags\fR
.RS 4
-Name of this probe
+Socket flags value
.RE
.PP
-\fItype\fR
+\fIprotocol\fR
.RS 4
-Socket type value
+Protocol value
.RE
.PP
-\fIflags\fR
+\fIfamily\fR
.RS 4
-Socket flags value
+Protocol family value
.RE
.PP
-\fIfamily\fR
+\fIname\fR
.RS 4
-Protocol family value
+Name of this probe
.RE
.PP
-\fIsize\fR
+\fIstate\fR
.RS 4
-Message size in bytes
+Socket state value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIflags\fR
.RS 4
-Name of this probe
+Socket flags value
.RE
.PP
-\fIstate\fR
+\fItype\fR
.RS 4
-Socket state value
+Socket type value
.RE
.PP
\fIprotocol\fR
Protocol value
.RE
.PP
-\fIsuccess\fR
+\fIsize\fR
.RS 4
-Was send successful? (1 = yes, 0 = no)
+Size of message sent (in bytes) or error code if success = 0
.RE
.PP
\fIfamily\fR
Protocol family value
.RE
.PP
-\fIflags\fR
+\fIsuccess\fR
.RS 4
-Socket flags value
+Was send successful? (1 = yes, 0 = no)
.RE
.PP
-\fIsize\fR
+\fIname\fR
.RS 4
-Size of message sent (in bytes) or error code if success = 0
+Name of this probe
.RE
.PP
-\fItype\fR
+\fIstate\fR
.RS 4
-Socket type value
+Socket state value
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
-.RS 4
-Name of this probe
-.RE
-.PP
\fIstate\fR
.RS 4
Socket state value
.RE
.PP
-\fIprotocol\fR
+\fIname\fR
.RS 4
-Protocol value
+Name of this probe
.RE
.PP
\fIfamily\fR
Protocol family value
.RE
.PP
-\fIflags\fR
-.RS 4
-Socket flags value
-.RE
-.PP
\fIsize\fR
.RS 4
Message size in bytes
.RS 4
Socket type value
.RE
+.PP
+\fIflags\fR
+.RS 4
+Socket flags value
+.RE
+.PP
+\fIprotocol\fR
+.RS 4
+Protocol value
+.RE
.SH "CONTEXT"
.PP
The message sender
.fi
.SH "VALUES"
.PP
-\fIname\fR
-.RS 4
-Name of this probe
-.RE
-.PP
\fIstate\fR
.RS 4
Socket state value
.RE
.PP
-\fIprotocol\fR
+\fIname\fR
.RS 4
-Protocol value
+Name of this probe
.RE
.PP
\fIsuccess\fR
Socket flags value
.RE
.PP
-\fIsize\fR
+\fItype\fR
.RS 4
-Size of message received (in bytes) or error code if success = 0
+Socket type value
.RE
.PP
-\fItype\fR
+\fIprotocol\fR
.RS 4
-Socket type value
+Protocol value
+.RE
+.PP
+\fIsize\fR
+.RS 4
+Size of message received (in bytes) or error code if success = 0
.RE
.SH "CONTEXT"
.PP
Name of this probe
.RE
.PP
-\fIprotocol\fR
+\fIstate\fR
.RS 4
-Protocol value
+Socket state value
.RE
.PP
-\fIstate\fR
+\fIfamily\fR
.RS 4
-Socket state value
+Protocol family value
.RE
.PP
-\fIsize\fR
+\fIprotocol\fR
.RS 4
-Message size in bytes
+Protocol value
.RE
.PP
-\fIfamily\fR
+\fItype\fR
.RS 4
-Protocol family value
+Socket type value
.RE
.PP
\fIflags\fR
Socket flags value
.RE
.PP
-\fItype\fR
+\fIsize\fR
.RS 4
-Socket type value
+Message size in bytes
.RE
.SH "CONTEXT"
.PP
Socket state value
.RE
.PP
-\fIprotocol\fR
+\fIfamily\fR
.RS 4
-Protocol value
+Protocol family value
.RE
.PP
\fIsuccess\fR
Was send successful? (1 = yes, 0 = no)
.RE
.PP
+\fItype\fR
+.RS 4
+Socket type value
+.RE
+.PP
\fIflags\fR
.RS 4
Socket flags value
.RE
.PP
-\fIfamily\fR
+\fIprotocol\fR
.RS 4
-Protocol family value
+Protocol value
.RE
.PP
\fIsize\fR
.RS 4
Size of message sent (in bytes) or error code if success = 0
.RE
-.PP
-\fItype\fR
-.RS 4
-Socket type value
-.RE
.SH "CONTEXT"
.PP
The message receiver\&.
.fi
.SH "VALUES"
.PP
-\fIh\fR
+\fIvec_nr\fR
.RS 4
-struct softirq_action* for current pending softirq
+softirq vector number
.RE
.PP
-\fIvec\fR
+\fIaction\fR
.RS 4
-softirq_action vector
+pointer to softirq handler just about to execute
.RE
.PP
-\fIvec_nr\fR
+\fIvec\fR
.RS 4
-softirq vector number
+softirq_action vector
.RE
.PP
-\fIaction\fR
+\fIh\fR
.RS 4
-pointer to softirq handler just about to execute
+struct softirq_action* for current pending softirq
.RE
.SH SEE ALSO\n
.IR tapset::irq (3stap)
.fi
.SH "VALUES"
.PP
+\fIvec_nr\fR
+.RS 4
+softirq vector number
+.RE
+.PP
\fIaction\fR
.RS 4
pointer to softirq handler that just finished execution
.RS 4
softirq_action vector
.RE
-.PP
-\fIvec_nr\fR
-.RS 4
-softirq vector number
-.RE
.SH SEE ALSO\n
.IR tapset::irq (3stap)
.fi
.SH "VALUES"
.PP
-\fIdest_path\fR
+\fIsource_path\fR
.RS 4
-the path the \&.ko file is going to (incl filename)
+the path the \&.ko file is coming from (incl filename)
.RE
.PP
-\fIsource_path\fR
+\fIdest_path\fR
.RS 4
-the path the \&.ko file is coming from (incl filename)
+the path the \&.ko file is going to (incl filename)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIdest_path\fR
+\fIsource_path\fR
.RS 4
the path the \&.sgn file is coming from (incl filename)
.RE
.PP
-\fIsource_path\fR
+\fIdest_path\fR
.RS 4
the path the \&.sgn file is coming from (incl filename)
.RE
.fi
.SH "VALUES"
.PP
-\fIret\fR
+\fIpid\fR
.RS 4
-the return value from posix_spawn
+the pid of the spawned process
.RE
.PP
-\fIpid\fR
+\fIret\fR
.RS 4
-the pid of the spawned process
+the return value from posix_spawn
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIlen\fR
+\fItype\fR
.RS 4
-the length (in bytes) of the data blob
+type of message being send; defined in runtime/transport/transport_msgs\&.h
.RE
.PP
\fIdata\fR
a ptr to a binary blob of data sent as the control message
.RE
.PP
-\fItype\fR
+\fIlen\fR
.RS 4
-type of message being send; defined in runtime/transport/transport_msgs\&.h
+the length (in bytes) of the data blob
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
+\fIdata\fR
+.RS 4
+a ptr to a binary blob of data sent as the control message
+.RE
+.PP
\fIlen\fR
.RS 4
the length (in bytes) of the data blob
.RS 4
type of message being send; defined in runtime/transport/transport_msgs\&.h
.RE
-.PP
-\fIdata\fR
-.RS 4
-a ptr to a binary blob of data sent as the control message
-.RE
.SH "DESCRIPTION"
.PP
Fires at the beginning of the send_request function\&.
.fi
.SH "VALUES"
.PP
-\fIold_prog\fR
+\fIold_progname\fR
.RS 4
-the number of old RPC program
+the name of old RPC program
.RE
.PP
-\fIprog\fR
+\fIprogname\fR
.RS 4
-the number of new RPC program
+the name of new RPC program
.RE
.PP
-\fIprogname\fR
+\fIold_vers\fR
.RS 4
-the name of new RPC program
+the version of old RPC program
.RE
.PP
-\fIvers\fR
+\fIservername\fR
.RS 4
-the version of new RPC program
+the server machine name
.RE
.PP
-\fIold_progname\fR
+\fIprog\fR
.RS 4
-the name of old RPC program
+the number of new RPC program
.RE
.PP
-\fIold_vers\fR
+\fIvers\fR
.RS 4
-the version of old RPC program
+the version of new RPC program
.RE
.PP
-\fIservername\fR
+\fIold_prog\fR
.RS 4
-the server machine name
+the number of old RPC program
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIflags\fR
+\fIxid\fR
.RS 4
-flags
+current transmission id
.RE
.PP
-\fIport\fR
+\fIproc\fR
.RS 4
-the port number
+the procedure number in this RPC call
.RE
.PP
-\fIprogname\fR
+\fIflags\fR
.RS 4
-the RPC program name
+flags
.RE
.PP
-\fIprog\fR
+\fIvers\fR
.RS 4
-the RPC program number
+the RPC program version number
.RE
.PP
-\fIproc\fR
+\fIservername\fR
.RS 4
-the procedure number in this RPC call
+the server machine name
.RE
.PP
-\fIxid\fR
+\fIprot\fR
.RS 4
-current transmission id
+the IP protocol number
.RE
.PP
-\fIvers\fR
+\fIprog\fR
.RS 4
-the RPC program version number
+the RPC program number
.RE
.PP
-\fIservername\fR
+\fIprocname\fR
.RS 4
-the server machine name
+the procedure name in this RPC call
.RE
.PP
-\fIprocname\fR
+\fIport\fR
.RS 4
-the procedure name in this RPC call
+the port number
.RE
.PP
\fIdead\fR
whether this client is abandoned
.RE
.PP
-\fIprot\fR
+\fIprogname\fR
.RS 4
-the IP protocol number
+the RPC program name
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
the procedure number in this RPC call
.RE
.PP
-\fIprog\fR
-.RS 4
-the RPC program number
-.RE
-.PP
-\fIprogname\fR
+\fIprot\fR
.RS 4
-the RPC program name
+the IP protocol number
.RE
.PP
-\fIvers\fR
+\fIservername\fR
.RS 4
-the RPC program version number
+the server machine name
.RE
.PP
-\fIport\fR
+\fIprog\fR
.RS 4
-the port number
+the RPC program number
.RE
.PP
\fIflags\fR
flags
.RE
.PP
-\fIservername\fR
+\fIvers\fR
.RS 4
-the server machine name
+the RPC program version number
.RE
.PP
-\fIprot\fR
+\fIprocname\fR
.RS 4
-the IP protocol number
+the procedure name in this RPC call
.RE
.PP
\fIdead\fR
whether this client is abandoned
.RE
.PP
-\fIprocname\fR
+\fIprogname\fR
.RS 4
-the procedure name in this RPC call
+the RPC program name
+.RE
+.PP
+\fIport\fR
+.RS 4
+the port number
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIvers\fR
+\fIservername\fR
.RS 4
-the RPC program version number
+the server machine name
.RE
.PP
\fIprot\fR
the IP protocol number
.RE
.PP
-\fIport\fR
+\fIprog\fR
.RS 4
-the port number
+the RPC program number
.RE
.PP
\fIprogname\fR
the RPC program name
.RE
.PP
-\fIservername\fR
+\fIauthflavor\fR
.RS 4
-the server machine name
+the authentication flavor
.RE
.PP
-\fIprog\fR
+\fIport\fR
.RS 4
-the RPC program number
+the port number
.RE
.PP
-\fIauthflavor\fR
+\fIvers\fR
.RS 4
-the authentication flavor
+the RPC program version number
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIprog\fR
+\fIauthflavor\fR
.RS 4
-the RPC program number
+the authentication flavor
.RE
.PP
-\fIservername\fR
+\fIvers\fR
.RS 4
-the server machine name
+the RPC program version number
.RE
.PP
-\fIprogname\fR
+\fIport\fR
.RS 4
-the RPC program name
+the port number
.RE
.PP
-\fIauthflavor\fR
+\fIprot\fR
.RS 4
-the authentication flavor
+the IP protocol number
.RE
.PP
-\fIport\fR
+\fIservername\fR
.RS 4
-the port number
+the server machine name
.RE
.PP
-\fIvers\fR
+\fIprogname\fR
.RS 4
-the RPC program version number
+the RPC program name
.RE
.PP
-\fIprot\fR
+\fIprog\fR
.RS 4
-the IP protocol number
+the RPC program number
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fItk_priority\fR
+\fItk_pid\fR
.RS 4
-the task priority
+the debugging aid of task
.RE
.PP
-\fIservername\fR
+\fItk_runstate\fR
.RS 4
-the server machine name
+the task run status
.RE
.PP
-\fItk_flags\fR
+\fItk_priority\fR
.RS 4
-the task flags
+the task priority
.RE
.PP
-\fItk_pid\fR
+\fItk_flags\fR
.RS 4
-the debugging aid of task
+the task flags
.RE
.PP
\fIprog\fR
the RPC program number
.RE
.PP
-\fIxid\fR
+\fIservername\fR
.RS 4
-the transmission id
+the server machine name
.RE
.PP
-\fItk_runstate\fR
+\fIxid\fR
.RS 4
-the task run status
+the transmission id
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIom_execute\fR
-.RS 4
-the RPC execution jiffies
-.RE
-.PP
\fIom_ntrans\fR
.RS 4
the count of RPC transmissions
.RE
.PP
-\fInetreconn\fR
+\fIprog\fR
.RS 4
-the count of reconnections
+the RPC program number
.RE
.PP
-\fIom_bytes_sent\fR
+\fIprot\fR
.RS 4
-the count of bytes out
+the IP protocol number
.RE
.PP
\fIservername\fR
the server machine name
.RE
.PP
-\fIom_bytes_recv\fR
+\fIvers\fR
.RS 4
-the count of bytes in
+the RPC program version number
.RE
.PP
-\fIprot\fR
+\fIauthflavor\fR
.RS 4
-the IP protocol number
+the authentication flavor
.RE
.PP
-\fItasks\fR
+\fIom_rtt\fR
.RS 4
-the number of references
+the RPC RTT jiffies
.RE
.PP
-\fIclones\fR
+\fItasks\fR
.RS 4
-the number of clones
+the number of references
.RE
.PP
-\fIom_rtt\fR
+\fIom_queue\fR
.RS 4
-the RPC RTT jiffies
+the jiffies queued for xmit
.RE
.PP
-\fIauthflavor\fR
+\fIom_execute\fR
.RS 4
-the authentication flavor
+the RPC execution jiffies
.RE
.PP
-\fIport\fR
+\fIom_bytes_sent\fR
.RS 4
-the port number
+the count of bytes out
.RE
.PP
-\fIom_ops\fR
+\fIclones\fR
.RS 4
-the count of operations
+the number of clones
.RE
.PP
-\fIprog\fR
+\fIom_bytes_recv\fR
.RS 4
-the RPC program number
+the count of bytes in
.RE
.PP
-\fIom_queue\fR
+\fIrpccnt\fR
.RS 4
-the jiffies queued for xmit
+the count of RPC calls
.RE
.PP
\fIprogname\fR
the RPC program name
.RE
.PP
-\fIrpccnt\fR
+\fIport\fR
.RS 4
-the count of RPC calls
+the port number
.RE
.PP
-\fIvers\fR
+\fInetreconn\fR
.RS 4
-the RPC program version number
+the count of reconnections
+.RE
+.PP
+\fIom_ops\fR
+.RS 4
+the count of operations
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIprot\fR
+\fIvers\fR
.RS 4
-the IP protocol in the RPC call
+the program version in the RPC call
.RE
.PP
-\fIdelay\fR
+\fIprot\fR
.RS 4
-the time delayed
+the IP protocol in the RPC call
.RE
.PP
-\fIvers\fR
+\fIprog\fR
.RS 4
-the program version in the RPC call
+the program number in the RPC call
.RE
.PP
\fIxid\fR
the transmission id in the RPC call
.RE
.PP
-\fIprog\fR
+\fItk_pid\fR
.RS 4
-the program number in the RPC call
+the debugging id of the task
.RE
.PP
-\fItk_pid\fR
+\fIdelay\fR
.RS 4
-the debugging id of the task
+the time delayed
.RE
.PP
\fItk_flags\fR
.fi
.SH "VALUES"
.PP
+\fItk_pid\fR
+.RS 4
+the debugging id of the task
+.RE
+.PP
\fItk_flags\fR
.RS 4
the flags of the task
the program number in the RPC call
.RE
.PP
-\fItk_pid\fR
-.RS 4
-the debugging id of the task
-.RE
-.PP
-\fIxid\fR
+\fIprot\fR
.RS 4
-the transmission id in the RPC call
+the IP protocol in the RPC call
.RE
.PP
\fIvers\fR
the program version in the RPC call
.RE
.PP
-\fIprot\fR
+\fIxid\fR
.RS 4
-the IP protocol in the RPC call
+the transmission id in the RPC call
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
+\fIvers\fR
+.RS 4
+the program version in the RPC call
+.RE
+.PP
\fIprog\fR
.RS 4
the program number in the RPC call
.RE
.PP
-\fIxid\fR
+\fIprot\fR
.RS 4
-the transmission id in the RPC call
+the IP protocol in the RPC call
.RE
.PP
-\fIvers\fR
+\fIxid\fR
.RS 4
-the program version in the RPC call
+the transmission id in the RPC call
.RE
.PP
\fItk_flags\fR
.RS 4
the flags of the task
.RE
-.PP
-\fIprot\fR
-.RS 4
-the IP protocol in the RPC call
-.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIvers\fR
+\fIxid\fR
.RS 4
-the program version in the RPC call
+the transmission id in the RPC call
.RE
.PP
-\fIxid\fR
+\fIvers\fR
.RS 4
-the transmission id in the RPC call
+the program version in the RPC call
.RE
.PP
\fIprog\fR
the program number in the RPC call
.RE
.PP
-\fItk_flags\fR
+\fIprot\fR
.RS 4
-the flags of the task
+the IP protocol in the RPC call
.RE
.PP
-\fIprot\fR
+\fItk_flags\fR
.RS 4
-the IP protocol in the RPC call
+the flags of the task
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIpg_nvers\fR
+\fIprog\fR
.RS 4
-the number of supported versions
+the number of the program
.RE
.PP
\fIbufsize\fR
the name of the program
.RE
.PP
-\fIprog\fR
+\fIpg_nvers\fR
.RS 4
-the number of the program
+the number of supported versions
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
the number of the program
.RE
.PP
-\fIrpcbadauth\fR
-.RS 4
-the count of requests drooped for authentication failure
-.RE
-.PP
-\fInetcnt\fR
+\fIsv_nrthreads\fR
.RS 4
-the count of received RPC requests
+the number of concurrent threads
.RE
.PP
\fIrpcbadfmt\fR
the service name
.RE
.PP
-\fIsv_progname\fR
-.RS 4
-the name of the program
-.RE
-.PP
\fInettcpconn\fR
.RS 4
the count of accepted TCP connections
.RE
.PP
-\fIsv_nrthreads\fR
+\fInetcnt\fR
.RS 4
-the number of concurrent threads
+the count of received RPC requests
.RE
.PP
\fIrpccnt\fR
.RS 4
the count of valid RPC requests
.RE
+.PP
+\fIrpcbadauth\fR
+.RS 4
+the count of requests drooped for authentication failure
+.RE
+.PP
+\fIsv_progname\fR
+.RS 4
+the name of the program
+.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIrq_prot\fR
+\fIsv_name\fR
.RS 4
-the IP protocol of the reqeust
+the service name
.RE
.PP
-\fIpeer_ip\fR
+\fIrq_xid\fR
.RS 4
-the peer address where the request is from
+the transmission id in the request
.RE
.PP
-\fIrq_proc\fR
+\fIrq_vers\fR
.RS 4
-the procedure number in the request
+the program version in the request
.RE
.PP
-\fIrq_xid\fR
+\fIrq_prog\fR
.RS 4
-the transmission id in the request
+the program number in the request
.RE
.PP
-\fIsv_name\fR
+\fIpeer_ip\fR
.RS 4
-the service name
+the peer address where the request is from
.RE
.PP
-\fIrq_vers\fR
+\fIrq_proc\fR
.RS 4
-the program version in the request
+the procedure number in the request
.RE
.PP
-\fIrq_prog\fR
+\fIrq_prot\fR
.RS 4
-the program number in the request
+the IP protocol of the reqeust
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIsv_name\fR
-.RS 4
-the service name
-.RE
-.PP
-\fIrq_vers\fR
+\fIsv_prog\fR
.RS 4
-the program version in the request
+the number of the program
.RE
.PP
\fIrq_prog\fR
the number of concurrent threads
.RE
.PP
-\fIsv_prog\fR
+\fIsv_name\fR
.RS 4
-the number of the program
+the service name
.RE
.PP
-\fIrq_prot\fR
+\fIrq_vers\fR
.RS 4
-the IP protocol of the reqeust
+the program version in the request
+.RE
+.PP
+\fIrq_xid\fR
+.RS 4
+the transmission id in the request
.RE
.PP
\fIrq_proc\fR
the procedure number in the request
.RE
.PP
-\fIpeer_ip\fR
+\fIrq_prot\fR
.RS 4
-the peer address where the request is from
+the IP protocol of the reqeust
.RE
.PP
-\fIrq_xid\fR
+\fIpeer_ip\fR
.RS 4
-the transmission id in the request
+the peer address where the request is from
.RE
.SH SEE ALSO\n
.IR tapset::rpc (3stap)
.fi
.SH "VALUES"
.PP
-\fIsv_prog\fR
+\fItimeout\fR
.RS 4
-the number of the program
+the timeout of waiting for data
.RE
.PP
\fIsv_name\fR
the service name
.RE
.PP
-\fItimeout\fR
+\fIsv_prog\fR
.RS 4
-the timeout of waiting for data
+the number of the program
.RE
.PP
\fIsv_nrthreads\fR
.fi
.SH "VALUES"
.PP
-\fIprogname\fR
+\fIsv_name\fR
.RS 4
-the name of the program
+the service name
.RE
.PP
-\fIprog\fR
+\fIport\fR
.RS 4
-the number of the program
+the port number
.RE
.PP
-\fIport\fR
+\fIprogname\fR
.RS 4
-the port number
+the name of the program
.RE
.PP
-\fIsv_name\fR
+\fIprog\fR
.RS 4
-the service name
+the number of the program
.RE
.PP
\fIprot\fR
the program number in the request
.RE
.PP
-\fIrq_vers\fR
-.RS 4
-the program version in the request
-.RE
-.PP
\fIsv_name\fR
.RS 4
the service name
.RE
.PP
-\fIrq_prot\fR
+\fIrq_vers\fR
.RS 4
-the IP protocol of the reqeust
+the program version in the request
.RE
.PP
\fIrq_xid\fR
the transmission id in the request
.RE
.PP
+\fIrq_prot\fR
+.RS 4
+the IP protocol of the reqeust
+.RE
+.PP
\fIrq_proc\fR
.RS 4
the procedure number in the request
.fi
.SH "VALUES"
.PP
-\fIname\fR
-.RS 4
-Name of this probe
-.RE
-.PP
\fIfamily\fR
.RS 4
IP address family
.RE
.PP
-\fIdport\fR
+\fIsport\fR
.RS 4
-TCP destination port
+TCP source port
.RE
.PP
-\fIdaddr\fR
+\fIsaddr\fR
.RS 4
-A string representing the destination IP address
+A string representing the source IP address
.RE
.PP
\fIsock\fR
Network socket
.RE
.PP
-\fIsport\fR
+\fIdport\fR
.RS 4
-TCP source port
+TCP destination port
.RE
.PP
-\fIflags\fR
+\fIname\fR
.RS 4
-TCP flags (e\&.g\&. FIN, etc)
+Name of this probe
.RE
.PP
-\fIsaddr\fR
+\fIdaddr\fR
.RS 4
-A string representing the source IP address
+A string representing the destination IP address
+.RE
+.PP
+\fIflags\fR
+.RS 4
+TCP flags (e\&.g\&. FIN, etc)
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIprotocol\fR
+\fIurg\fR
.RS 4
-Packet protocol from driver
+TCP URG flag
.RE
.PP
-\fIdaddr\fR
+\fIsyn\fR
.RS 4
-A string representing the destination IP address
+TCP SYN flag
.RE
.PP
-\fIrst\fR
+\fIprotocol\fR
.RS 4
-TCP RST flag
+Packet protocol from driver
.RE
.PP
-\fIurg\fR
+\fIdport\fR
.RS 4
-TCP URG flag
+TCP destination port
.RE
.PP
-\fIdport\fR
+\fIname\fR
.RS 4
-TCP destination port
+Name of the probe point
.RE
.PP
-\fIsyn\fR
+\fIack\fR
.RS 4
-TCP SYN flag
+TCP ACK flag
.RE
.PP
-\fIsport\fR
+\fIrst\fR
.RS 4
-TCP source port
+TCP RST flag
.RE
.PP
-\fIsaddr\fR
+\fIdaddr\fR
.RS 4
-A string representing the source IP address
+A string representing the destination IP address
.RE
.PP
-\fIfin\fR
+\fIfamily\fR
.RS 4
-TCP FIN flag
+IP address family
.RE
.PP
-\fIpsh\fR
+\fIsport\fR
.RS 4
-TCP PSH flag
+TCP source port
.RE
.PP
-\fIiphdr\fR
+\fIsaddr\fR
.RS 4
-IP header address
+A string representing the source IP address
.RE
.PP
-\fIname\fR
+\fIiphdr\fR
.RS 4
-Name of the probe point
+IP header address
.RE
.PP
-\fIfamily\fR
+\fIpsh\fR
.RS 4
-IP address family
+TCP PSH flag
.RE
.PP
-\fIack\fR
+\fIfin\fR
.RS 4
-TCP ACK flag
+TCP FIN flag
.RE
.SH SEE ALSO\n
.IR tapset::tcp (3stap)
.fi
.SH "VALUES"
.PP
-\fIsock\fR
+\fIsaddr\fR
.RS 4
-Network socket
+A string representing the source IP address
.RE
.PP
-\fIsport\fR
+\fIfamily\fR
.RS 4
-TCP source port
+IP address family
.RE
.PP
-\fIsaddr\fR
+\fIsport\fR
.RS 4
-A string representing the source IP address
+TCP source port
.RE
.PP
\fIdaddr\fR
A string representing the destination IP address
.RE
.PP
+\fIname\fR
+.RS 4
+Name of this probe
+.RE
+.PP
\fIdport\fR
.RS 4
TCP destination port
Number of bytes to be received
.RE
.PP
-\fIfamily\fR
-.RS 4
-IP address family
-.RE
-.PP
-\fIname\fR
+\fIsock\fR
.RS 4
-Name of this probe
+Network socket
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIfamily\fR
-.RS 4
-IP address family
-.RE
-.PP
-\fIname\fR
+\fIsaddr\fR
.RS 4
-Name of this probe
+A string representing the source IP address
.RE
.PP
-\fIsaddr\fR
+\fIfamily\fR
.RS 4
-A string representing the source IP address
+IP address family
.RE
.PP
\fIsport\fR
TCP source port
.RE
.PP
-\fIdport\fR
+\fIname\fR
.RS 4
-TCP destination port
+Name of this probe
.RE
.PP
\fIdaddr\fR
.RS 4
Number of bytes received or error code if an error occurred\&.
.RE
+.PP
+\fIdport\fR
+.RS 4
+TCP destination port
+.RE
.SH "CONTEXT"
.PP
The process which receives a tcp message
IP address family
.RE
.PP
-\fIsock\fR
+\fIsize\fR
.RS 4
-Network socket
+Number of bytes to send
.RE
.PP
-\fIsize\fR
+\fIsock\fR
.RS 4
-Number of bytes to send
+Network socket
.RE
.PP
\fIname\fR
.fi
.SH "VALUES"
.PP
-\fIsize\fR
+\fIname\fR
.RS 4
-Number of bytes sent or error code if an error occurred\&.
+Name of this probe
.RE
.PP
-\fIname\fR
+\fIsize\fR
.RS 4
-Name of this probe
+Number of bytes sent or error code if an error occurred\&.
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsock\fR
+\fIoptlen\fR
.RS 4
-Network socket
+Used to access values for
+\fBsetsockopt\fR
.RE
.PP
\fIoptstr\fR
Resolves optname to a human\-readable format
.RE
.PP
-\fIoptname\fR
-.RS 4
-TCP socket options (e\&.g\&. TCP_NODELAY, TCP_MAXSEG, etc)
-.RE
-.PP
\fIname\fR
.RS 4
Name of this probe
.RE
.PP
-\fIfamily\fR
+\fIsock\fR
.RS 4
-IP address family
+Network socket
.RE
.PP
\fIlevel\fR
The level at which the socket options will be manipulated
.RE
.PP
-\fIoptlen\fR
+\fIfamily\fR
.RS 4
-Used to access values for
-\fBsetsockopt\fR
+IP address family
+.RE
+.PP
+\fIoptname\fR
+.RS 4
+TCP socket options (e\&.g\&. TCP_NODELAY, TCP_MAXSEG, etc)
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fIop\fR
+\fIsk\fR
.RS 4
-value to be added to the counter (default value of 1)
+pointer to the struct sock being acted on
.RE
.PP
-\fIsk\fR
+\fIop\fR
.RS 4
-pointer to the struct sock being acted on
+value to be added to the counter (default value of 1)
.RE
.SH "DESCRIPTION"
.PP
.fi
.SH "VALUES"
.PP
-\fImodule\fR
+\fIdriver_name\fR
.RS 4
-the module name
+the driver name
.RE
.PP
\fIname\fR
the driver \&.dev_name name
.RE
.PP
-\fIdriver_name\fR
+\fImodule\fR
.RS 4
-the driver name
+the module name
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIcmd\fR
-.RS 4
-the ioctl command
-.RE
-.PP
\fIname\fR
.RS 4
the file name
.RS 4
the ioctl argument
.RE
+.PP
+\fIcmd\fR
+.RS 4
+the ioctl command
+.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
+\fIinode_flags\fR
.RS 4
-the file name
+the inode flags
.RE
.PP
-\fIfile_mode\fR
+\fIfile_flags\fR
.RS 4
-the file mode
+the file flags
.RE
.PP
-\fIfile_flags\fR
+\fIfile_name\fR
.RS 4
-the file flags
+the file name
.RE
.PP
-\fIinode_flags\fR
+\fIfile_mode\fR
.RS 4
-the inode flags
+the file mode
.RE
.PP
\fIinode_number\fR
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
+\fIwait_key\fR
.RS 4
-the tty file name
+the wait queue key
.RE
.PP
-\fIwait_key\fR
+\fIfile_name\fR
.RS 4
-the wait queue key
+the tty file name
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
+\fIbuffer\fR
.RS 4
-the file name lreated to the tty
+the buffer that will receive the characters
.RE
.PP
-\fInr\fR
+\fIdriver_name\fR
.RS 4
-The amount of characters to be read
+the driver name
.RE
.PP
-\fIdriver_name\fR
+\fIfile_name\fR
.RS 4
-the driver name
+the file name lreated to the tty
.RE
.PP
-\fIbuffer\fR
+\fInr\fR
.RS 4
-the buffer that will receive the characters
+The amount of characters to be read
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIfp\fR
+\fIindex\fR
.RS 4
-The flag buffer
+The tty Index
.RE
.PP
-\fIname\fR
+\fIcount\fR
.RS 4
-the name of the module file
+The amount of characters received
.RE
.PP
-\fIdriver_name\fR
+\fIcp\fR
.RS 4
-the driver name
+the buffer that was received
.RE
.PP
-\fIid\fR
+\fIname\fR
.RS 4
-the tty id
+the name of the module file
.RE
.PP
-\fIcount\fR
+\fIdriver_name\fR
.RS 4
-The amount of characters received
+the driver name
.RE
.PP
-\fIcp\fR
+\fIid\fR
.RS 4
-the buffer that was received
+the tty id
.RE
.PP
-\fIindex\fR
+\fIfp\fR
.RS 4
-The tty Index
+The flag buffer
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
+\fIindex\fR
+.RS 4
+the tty index requested
+.RE
+.PP
\fImodule\fR
.RS 4
the module name
.RS 4
the driver name
.RE
-.PP
-\fIindex\fR
-.RS 4
-the tty index requested
-.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIfile_name\fR
-.RS 4
-the file name
-.RE
-.PP
-\fIfile_flags\fR
+\fIinode_flags\fR
.RS 4
-the file flags
+the inode flags
.RE
.PP
\fIfile_mode\fR
the file mode
.RE
.PP
-\fIinode_flags\fR
+\fIfile_name\fR
.RS 4
-the inode flags
+the file name
.RE
.PP
\fIinode_number\fR
the inode number
.RE
.PP
+\fIfile_flags\fR
+.RS 4
+the file flags
+.RE
+.PP
\fIinode_state\fR
.RS 4
the inode state
.fi
.SH "VALUES"
.PP
-\fInew_col\fR
+\fIold_row\fR
.RS 4
-the new col value
+the old row value
.RE
.PP
-\fInew_row\fR
+\fIold_xpixel\fR
.RS 4
-the new row value
+the old xpixel
.RE
.PP
-\fIold_row\fR
+\fIname\fR
.RS 4
-the old row value
+the tty name
.RE
.PP
\fIold_ypixel\fR
the old ypixel
.RE
.PP
-\fIname\fR
+\fInew_col\fR
.RS 4
-the tty name
+the new col value
.RE
.PP
-\fIold_xpixel\fR
+\fIold_col\fR
.RS 4
-the old xpixel
+the old col value
.RE
.PP
-\fInew_xpixel\fR
+\fInew_ypixel\fR
.RS 4
-the new xpixel value
+the new ypixel value
.RE
.PP
-\fInew_ypixel\fR
+\fInew_row\fR
.RS 4
-the new ypixel value
+the new row value
.RE
.PP
-\fIold_col\fR
+\fInew_xpixel\fR
.RS 4
-the old col value
+the new xpixel value
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
the driver \&.dev_name name
.RE
.PP
-\fImodule\fR
+\fIdriver_name\fR
.RS 4
-the module name
+the driver name
.RE
.PP
-\fIdriver_name\fR
+\fImodule\fR
.RS 4
-the driver name
+the module name
.RE
.PP
\fIindex\fR
.fi
.SH "VALUES"
.PP
-\fInr\fR
+\fIbuffer\fR
.RS 4
-The amount of characters
+the buffer that will be written
.RE
.PP
\fIfile_name\fR
the file name lreated to the tty
.RE
.PP
-\fIbuffer\fR
+\fIdriver_name\fR
.RS 4
-the buffer that will be written
+the driver name
.RE
.PP
-\fIdriver_name\fR
+\fInr\fR
.RS 4
-the driver name
+The amount of characters
.RE
.SH SEE ALSO\n
.IR tapset::tty (3stap)
.fi
.SH "VALUES"
.PP
-\fIsaddr\fR
+\fIfamily\fR
.RS 4
-A string representing the source IP address
+IP address family
.RE
.PP
\fIsock\fR
Network socket used by the process
.RE
.PP
-\fIdaddr\fR
+\fIsaddr\fR
.RS 4
-A string representing the destination IP address
+A string representing the source IP address
.RE
.PP
-\fIdport\fR
+\fIsport\fR
.RS 4
-UDP destination port
+UDP source port
.RE
.PP
-\fIflags\fR
+\fIdaddr\fR
.RS 4
-Flags (e\&.g\&. FIN, etc)
+A string representing the destination IP address
.RE
.PP
-\fIsport\fR
+\fIname\fR
.RS 4
-UDP source port
+The name of this probe
.RE
.PP
-\fIname\fR
+\fIdport\fR
.RS 4
-The name of this probe
+UDP destination port
.RE
.PP
-\fIfamily\fR
+\fIflags\fR
.RS 4
-IP address family
+Flags (e\&.g\&. FIN, etc)
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
+\fIname\fR
+.RS 4
+The name of this probe
+.RE
+.PP
\fIdaddr\fR
.RS 4
A string representing the destination IP address
A string representing the source IP address
.RE
.PP
-\fIsport\fR
-.RS 4
-UDP source port
-.RE
-.PP
-\fIname\fR
+\fIfamily\fR
.RS 4
-The name of this probe
+IP address family
.RE
.PP
-\fIfamily\fR
+\fIsport\fR
.RS 4
-IP address family
+UDP source port
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIsize\fR
+\fIdport\fR
.RS 4
-Number of bytes received by the process
+UDP destination port
.RE
.PP
-\fIfamily\fR
+\fIdaddr\fR
.RS 4
-IP address family
+A string representing the destination IP address
.RE
.PP
-\fIsport\fR
+\fIsize\fR
.RS 4
-UDP source port
+Number of bytes received by the process
.RE
.PP
\fIname\fR
The name of this probe
.RE
.PP
-\fIsock\fR
+\fIsport\fR
.RS 4
-Network socket used by the process
+UDP source port
.RE
.PP
-\fIsaddr\fR
+\fIfamily\fR
.RS 4
-A string representing the source IP address
+IP address family
.RE
.PP
-\fIdport\fR
+\fIsaddr\fR
.RS 4
-UDP destination port
+A string representing the source IP address
.RE
.PP
-\fIdaddr\fR
+\fIsock\fR
.RS 4
-A string representing the destination IP address
+Network socket used by the process
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIdport\fR
.RS 4
-The name of this probe
+UDP destination port
.RE
.PP
-\fIsport\fR
+\fIdaddr\fR
.RS 4
-UDP source port
+A string representing the destination IP address
.RE
.PP
-\fIfamily\fR
+\fIsize\fR
.RS 4
-IP address family
+Number of bytes received by the process
.RE
.PP
-\fIsize\fR
+\fIname\fR
.RS 4
-Number of bytes received by the process
+The name of this probe
.RE
.PP
-\fIdaddr\fR
+\fIsport\fR
.RS 4
-A string representing the destination IP address
+UDP source port
.RE
.PP
-\fIdport\fR
+\fIfamily\fR
.RS 4
-UDP destination port
+IP address family
.RE
.PP
\fIsaddr\fR
The name of this probe
.RE
.PP
-\fIfamily\fR
+\fIdaddr\fR
.RS 4
-IP address family
+A string representing the destination IP address
.RE
.PP
-\fIsport\fR
+\fIdport\fR
.RS 4
-UDP source port
+UDP destination port
.RE
.PP
-\fIsaddr\fR
+\fIfamily\fR
.RS 4
-A string representing the source IP address
+IP address family
.RE
.PP
\fIsock\fR
Network socket used by the process
.RE
.PP
-\fIdaddr\fR
+\fIsaddr\fR
.RS 4
-A string representing the destination IP address
+A string representing the source IP address
.RE
.PP
-\fIdport\fR
+\fIsport\fR
.RS 4
-UDP destination port
+UDP source port
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIlength\fR
.RS 4
-name of the probe point
+the length of the memory segment
.RE
.PP
\fIaddress\fR
the requested address
.RE
.PP
-\fIlength\fR
+\fIname\fR
.RS 4
-the length of the memory segment
+name of the probe point
.RE
.SH "CONTEXT"
.PP
pointer to the kmemory allocated which is returned by kmalloc
.RE
.PP
-\fIcall_site\fR
+\fIname\fR
.RS 4
-address of the function calling this kmemory function
+name of the probe point
.RE
.PP
-\fIname\fR
+\fIcall_site\fR
.RS 4
-name of the probe point
+address of the function calling this kmemory function
.RE
.PP
\fIcaller_function\fR
.fi
.SH "VALUES"
.PP
-\fIgfp_flag_name\fR
+\fIbytes_req\fR
.RS 4
-type of kmemory to allocate (in String format)
+requested Bytes
.RE
.PP
-\fIcaller_function\fR
+\fIgfp_flags\fR
.RS 4
-name of the caller function
+type of kmemory to allocate
.RE
.PP
-\fIname\fR
+\fIbytes_alloc\fR
.RS 4
-name of the probe point
+allocated Bytes
.RE
.PP
-\fIbytes_req\fR
+\fIcaller_function\fR
.RS 4
-requested Bytes
+name of the caller function
.RE
.PP
-\fIgfp_flags\fR
+\fIcall_site\fR
.RS 4
-type of kmemory to allocate
+address of the kmemory function
.RE
.PP
-\fIcall_site\fR
+\fIgfp_flag_name\fR
.RS 4
-address of the kmemory function
+type of kmemory to allocate (in String format)
.RE
.PP
\fIptr\fR
pointer to the kmemory allocated
.RE
.PP
-\fIbytes_alloc\fR
+\fIname\fR
.RS 4
-allocated Bytes
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::memory (3stap)
.fi
.SH "VALUES"
.PP
-\fIptr\fR
+\fIbytes_req\fR
.RS 4
-pointer to the kmemory allocated
+requested Bytes
.RE
.PP
-\fIcall_site\fR
+\fIgfp_flags\fR
.RS 4
-address of the function caling this kmemory function
+type of kmemory to allocate
.RE
.PP
\fIbytes_alloc\fR
allocated Bytes
.RE
.PP
-\fIgfp_flag_name\fR
+\fIcaller_function\fR
.RS 4
-type of kmemory to allocate(in string format)
+name of the caller function
.RE
.PP
-\fIcaller_function\fR
+\fIcall_site\fR
.RS 4
-name of the caller function
+address of the function caling this kmemory function
.RE
.PP
-\fIgfp_flags\fR
+\fIgfp_flag_name\fR
.RS 4
-type of kmemory to allocate
+type of kmemory to allocate(in string format)
.RE
.PP
-\fIname\fR
+\fIptr\fR
.RS 4
-name of the probe point
+pointer to the kmemory allocated
.RE
.PP
-\fIbytes_req\fR
+\fIname\fR
.RS 4
-requested Bytes
+name of the probe point
.RE
.SH SEE ALSO\n
.IR tapset::memory (3stap)
.fi
.SH "VALUES"
.PP
-\fIcaller_function\fR
+\fIbytes_alloc\fR
.RS 4
-name of the caller function\&.
+allocated Bytes
.RE
.PP
-\fIgfp_flag_name\fR
+\fIcaller_function\fR
.RS 4
-type of kmemory to allocate(in string format)
+name of the caller function\&.
.RE
.PP
\fIgfp_flags\fR
name of the probe point
.RE
.PP
-\fIbytes_alloc\fR
+\fIptr\fR
.RS 4
-allocated Bytes
+pointer to the kmemory allocated
.RE
.PP
-\fIptr\fR
+\fIgfp_flag_name\fR
.RS 4
-pointer to the kmemory allocated
+type of kmemory to allocate(in string format)
.RE
.PP
\fIcall_site\fR
.fi
.SH "VALUES"
.PP
-\fIbytes_alloc\fR
+\fIptr\fR
.RS 4
-allocated Bytes
+pointer to the kmemory allocated
.RE
.PP
-\fIcall_site\fR
+\fIname\fR
.RS 4
-address of the function calling this kmemory function
+name of the probe point
.RE
.PP
-\fIptr\fR
+\fIcall_site\fR
.RS 4
-pointer to the kmemory allocated
+address of the function calling this kmemory function
.RE
.PP
-\fIcaller_function\fR
+\fIgfp_flag_name\fR
.RS 4
-name of the caller function
+type of kmemory to allocate(in string format)
.RE
.PP
-\fIgfp_flag_name\fR
+\fIgfp_flags\fR
.RS 4
-type of kmemory to allocate(in string format)
+type of kmemory to allocate
.RE
.PP
-\fIbytes_req\fR
+\fIcaller_function\fR
.RS 4
-requested Bytes
+name of the caller function
.RE
.PP
-\fIname\fR
+\fIbytes_alloc\fR
.RS 4
-name of the probe point
+allocated Bytes
.RE
.PP
-\fIgfp_flags\fR
+\fIbytes_req\fR
.RS 4
-type of kmemory to allocate
+requested Bytes
.RE
.SH SEE ALSO\n
.IR tapset::memory (3stap)
.fi
.SH "VALUES"
.PP
-\fIcaller_function\fR
+\fIcall_site\fR
.RS 4
-Name of the caller function\&.
+Address of the function calling this kmemory function
.RE
.PP
-\fIname\fR
+\fIptr\fR
.RS 4
-Name of the probe point
+Pointer to the kmemory allocated which is returned by kmem_cache
.RE
.PP
-\fIcall_site\fR
+\fIname\fR
.RS 4
-Address of the function calling this kmemory function
+Name of the probe point
.RE
.PP
-\fIptr\fR
+\fIcaller_function\fR
.RS 4
-Pointer to the kmemory allocated which is returned by kmem_cache
+Name of the caller function\&.
.RE
.SH SEE ALSO\n
.IR tapset::memory (3stap)
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIaddress\fR
.RS 4
-name of the probe point
+the requested address
.RE
.PP
-\fIaddress\fR
+\fIname\fR
.RS 4
-the requested address
+name of the probe point
.RE
.PP
\fIlength\fR
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIaddress\fR
.RS 4
-name of the probe point
+the requested address
.RE
.PP
-\fIaddress\fR
+\fIname\fR
.RS 4
-the requested address
+name of the probe point
.RE
.PP
\fIlength\fR
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fItask\fR
.RS 4
-name of the probe point
+the task being killed
.RE
.PP
-\fItask\fR
+\fIname\fR
.RS 4
-the task being killed
+name of the probe point
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
-\fIname\fR
+\fIwrite_access\fR
.RS 4
-name of the probe point
+indicates whether this was a write or read access; 1 indicates a write, while 0 indicates a read
.RE
.PP
-\fIwrite_access\fR
+\fIname\fR
.RS 4
-indicates whether this was a write or read access; 1 indicates a write, while 0 indicates a read
+name of the probe point
.RE
.PP
\fIaddress\fR
.fi
.SH "VALUES"
.PP
-\fIfault_type\fR
+\fIname\fR
.RS 4
-returns either 0 (VM_FAULT_OOM) for out of memory faults, 2 (VM_FAULT_MINOR) for minor faults, 3 (VM_FAULT_MAJOR) for major faults, or 1 (VM_FAULT_SIGBUS) if the fault was neither OOM, minor fault, nor major fault\&.
+name of the probe point
.RE
.PP
-\fIname\fR
+\fIfault_type\fR
.RS 4
-name of the probe point
+returns either 0 (VM_FAULT_OOM) for out of memory faults, 2 (VM_FAULT_MINOR) for minor faults, 3 (VM_FAULT_MAJOR) for major faults, or 1 (VM_FAULT_SIGBUS) if the fault was neither OOM, minor fault, nor major fault\&.
.RE
.SH SEE ALSO\n
.IR tapset::memory (3stap)
.fi
.SH "VALUES"
.PP
-\fIzero\fR
+\fIaddress\fR
.RS 4
-boolean indicating whether it is a zero page (can do a clear instead of a copy)
+The address of the shared write
.RE
.PP
\fIname\fR
Name of the probe point
.RE
.PP
-\fIaddress\fR
+\fIzero\fR
.RS 4
-The address of the shared write
+boolean indicating whether it is a zero page (can do a clear instead of a copy)
.RE
.SH "CONTEXT"
.PP
.fi
.SH "VALUES"
.PP
+\fIwork_func\fR
+.RS 4
+pointer to handler function
+.RE
+.PP
\fIwq_thread\fR
.RS 4
task_struct of the workqueue thread
.RS 4
work_struct* being executed
.RE
-.PP
-\fIwork_func\fR
-.RS 4
-pointer to handler function
-.RE
.SH SEE ALSO\n
.IR tapset::irq (3stap)
.fi
.SH "VALUES"
.PP
-\fIwq_thread\fR
+\fIwork\fR
.RS 4
-task_struct of the workqueue thread
+work_struct* being queued
.RE
.PP
-\fIwork\fR
+\fIwq_thread\fR
.RS 4
-work_struct* being queued
+task_struct of the workqueue thread
.RE
.PP
\fIwork_func\fR
Convert seconds since epoch into human readable date/time string
.IP
See
+.IR function::ctime (3stap)
+ for details.
+.P
+.TP
+.B ctime
+Convert seconds since epoch into human readable date/time string
+.IP
+See
.IR function::ctime (3stap)
for details.
." -*- nroff -*-
-.TH TAPSET::SYSCALLS 3stap "January 2016" "Systemtap Tapset Reference"
+.TH TAPSET::SYSCALLS 3stap "March 2016" "Systemtap Tapset Reference"
.SH NAME
tapset::syscalls \- systemtap syscall tapset
"""
Numbers all overloaded entries.
"""
- num_overloads = len(entry.xpath("refsect1[2]/para"))
+ sys.stderr.write("entry: %s\n" % etree.tostring(entry))
+ num_overloads = len(entry.xpath("refsynopsisdiv/programlisting"))
synopsis = entry.xpath("refsynopsisdiv/programlisting")
description = entry.xpath("refsect1[2]/para")
for i in range(num_overloads):
"""
merged = functions[0]
+ sys.stderr.write("processing item %s\n" % merged.xpath("refnamediv/refname")[0].text)
+
# merge params
new_params = get_params(functions)
param_list = merged.xpath("refsect1[1]/variablelist")[0]
." -*- nroff -*-
-.TH TAPSET::SYSCALLS 3stap "January 2016" "Systemtap Tapset Reference"
+.TH TAPSET::SYSCALLS 3stap "March 2016" "Systemtap Tapset Reference"
.SH NAME
tapset::syscalls \- systemtap syscall tapset
}
%}
-
-/**
- * sfunction ctime - Convert seconds since epoch into human readable date/time string
- *
- * * Description: Without an argument, does the same as ctime(gettimeofday_s()).
- */
-function ctime:string() { return ctime(gettimeofday_s()) }
+function ctime:string()
+{
+ return ctime(gettimeofday_s())
+}
/**
* sfunction ctime - Convert seconds since epoch into human readable date/time string
*
- * * Description: Without an argument, does the same as ctime(gettimeofday_s()).
+ *
+ * Description: Without an argument, does the same as ctime(gettimeofday_s()).
+ *
*/
-function ctime:string() { return ctime(gettimeofday_s()) }
+function ctime:string()
+{
+ return ctime(gettimeofday_s())
+}