+++ /dev/null
-# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
-# Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.11'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.11.6], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.6])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009,
-# 2010, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], UPC, [depcc="$UPC" am_compiler_list=],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 5
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 16
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES(OBJC)],
- [define([AC_PROG_OBJC],
- defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
-dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005, 2008, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008,
-# 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAINTAINER_MODE([DEFAULT-MODE])
-# ----------------------------------
-# Control maintainer-specific portions of Makefiles.
-# Default is to disable them, unless `enable' is passed literally.
-# For symmetry, `disable' may be passed as well. Anyway, the user
-# can override the default with the --enable/--disable switch.
-AC_DEFUN([AM_MAINTAINER_MODE],
-[m4_case(m4_default([$1], [disable]),
- [enable], [m4_define([am_maintainer_other], [disable])],
- [disable], [m4_define([am_maintainer_other], [enable])],
- [m4_define([am_maintainer_other], [enable])
- m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
-AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode's default is 'disable' unless 'enable' is passed
- AC_ARG_ENABLE([maintainer-mode],
-[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- [USE_MAINTAINER_MODE=$enableval],
- [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST([MAINT])dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005, 2006, 2011 Free Software Foundation,
-# Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for `mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005, 2008, 2010 Free Software
-# Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 1
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005, 2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([../../../acinclude.m4])
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for newlib 2.2.0.
-#
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='newlib'
-PACKAGE_TARNAME='newlib'
-PACKAGE_VERSION='2.2.0'
-PACKAGE_STRING='newlib 2.2.0'
-PACKAGE_BUGREPORT=''
-PACKAGE_URL=''
-
-ac_unique_file="isatty.c"
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-sys_dir
-machine_dir
-libm_machine_dir
-lpfx
-aext
-oext
-OBJEXT
-USE_LIBTOOL_FALSE
-USE_LIBTOOL_TRUE
-ELIX_LEVEL_4_FALSE
-ELIX_LEVEL_4_TRUE
-ELIX_LEVEL_3_FALSE
-ELIX_LEVEL_3_TRUE
-ELIX_LEVEL_2_FALSE
-ELIX_LEVEL_2_TRUE
-ELIX_LEVEL_1_FALSE
-ELIX_LEVEL_1_TRUE
-ELIX_LEVEL_0_FALSE
-ELIX_LEVEL_0_TRUE
-LDFLAGS
-NO_INCLUDE_LIST
-NEWLIB_CFLAGS
-CCASFLAGS
-CCAS
-MAINT
-MAINTAINER_MODE_FALSE
-MAINTAINER_MODE_TRUE
-READELF
-RANLIB
-AR
-AS
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-CC
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-newlib_basedir
-MAY_SUPPLY_SYSCALLS_FALSE
-MAY_SUPPLY_SYSCALLS_TRUE
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_multilib
-enable_target_optspace
-enable_malloc_debugging
-enable_newlib_multithread
-enable_newlib_iconv
-enable_newlib_elix_level
-enable_newlib_io_float
-enable_newlib_supplied_syscalls
-enable_dependency_tracking
-enable_maintainer_mode
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CCAS
-CCASFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures newlib 2.2.0 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/newlib]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of newlib 2.2.0:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-multilib build many library versions (default)
- --enable-target-optspace optimize for space
- --enable-malloc-debugging indicate malloc debugging requested
- --enable-newlib-multithread enable support for multiple threads
- --enable-newlib-iconv enable iconv library support
- --enable-newlib-elix-level supply desired elix library level (1-4)
- --disable-newlib-io-float disable printf/scanf family float support
- --disable-newlib-supplied-syscalls disable newlib from supplying syscalls
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
-
-Some influential environment variables:
- CCAS assembler compiler command (defaults to CC)
- CCASFLAGS assembler compiler flags (defaults to CFLAGS)
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-newlib configure 2.2.0
-generated by GNU Autoconf 2.68
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by newlib $as_me 2.2.0, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-ac_aux_dir=
-for ac_dir in ../../../.. "$srcdir"/../../../..; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../../.. \"$srcdir\"/../../../.." "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-am__api_version='1.11'
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
-esac
-
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-# Check whether --enable-multilib was given.
-if test "${enable_multilib+set}" = set; then :
- enableval=$enable_multilib; case "${enableval}" in
- yes) multilib=yes ;;
- no) multilib=no ;;
- *) as_fn_error $? "bad value ${enableval} for multilib option" "$LINENO" 5 ;;
- esac
-else
- multilib=yes
-fi
-
-# Check whether --enable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then :
- enableval=$enable_target_optspace; case "${enableval}" in
- yes) target_optspace=yes ;;
- no) target_optspace=no ;;
- *) as_fn_error $? "bad value ${enableval} for target-optspace option" "$LINENO" 5 ;;
- esac
-else
- target_optspace=
-fi
-
-# Check whether --enable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then :
- enableval=$enable_malloc_debugging; case "${enableval}" in
- yes) malloc_debugging=yes ;;
- no) malloc_debugging=no ;;
- *) as_fn_error $? "bad value ${enableval} for malloc-debugging option" "$LINENO" 5 ;;
- esac
-else
- malloc_debugging=
-fi
-
-# Check whether --enable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then :
- enableval=$enable_newlib_multithread; case "${enableval}" in
- yes) newlib_multithread=yes ;;
- no) newlib_multithread=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-multithread option" "$LINENO" 5 ;;
- esac
-else
- newlib_multithread=yes
-fi
-
-# Check whether --enable-newlib-iconv was given.
-if test "${enable_newlib_iconv+set}" = set; then :
- enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
- case "${enableval}" in
- yes) newlib_iconv=yes ;;
- no) newlib_iconv=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-iconv option" "$LINENO" 5 ;;
- esac
- fi
-else
- newlib_iconv=${newlib_iconv}
-fi
-
-# Check whether --enable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then :
- enableval=$enable_newlib_elix_level; case "${enableval}" in
- 0) newlib_elix_level=0 ;;
- 1) newlib_elix_level=1 ;;
- 2) newlib_elix_level=2 ;;
- 3) newlib_elix_level=3 ;;
- 4) newlib_elix_level=4 ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-elix-level option" "$LINENO" 5 ;;
- esac
-else
- newlib_elix_level=0
-fi
-
-# Check whether --enable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then :
- enableval=$enable_newlib_io_float; case "${enableval}" in
- yes) newlib_io_float=yes ;;
- no) newlib_io_float=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-float option" "$LINENO" 5 ;;
- esac
-else
- newlib_io_float=yes
-fi
-
-# Check whether --enable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then :
- enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
- yes) newlib_may_supply_syscalls=yes ;;
- no) newlib_may_supply_syscalls=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-supplied-syscalls option" "$LINENO" 5 ;;
- esac
-else
- newlib_may_supply_syscalls=yes
-fi
-
- if test x${newlib_may_supply_syscalls} = xyes; then
- MAY_SUPPLY_SYSCALLS_TRUE=
- MAY_SUPPLY_SYSCALLS_FALSE='#'
-else
- MAY_SUPPLY_SYSCALLS_TRUE='#'
- MAY_SUPPLY_SYSCALLS_FALSE=
-fi
-
-
-
-test -z "${with_target_subdir}" && with_target_subdir=.
-
-if test "${srcdir}" = "."; then
- if test "${with_target_subdir}" != "."; then
- newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
- else
- newlib_basedir="${srcdir}/${with_multisrctop}../../.."
- fi
-else
- newlib_basedir="${srcdir}/../../.."
-fi
-
-
-
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='newlib'
- VERSION='2.2.0'
-
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-# FIXME: We temporarily define our own version of AC_PROG_CC. This is
-# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
-# are probably using a cross compiler, which will not be able to fully
-# link an executable. This should really be fixed in autoconf
-# itself.
-
-
-
-
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -z "$CC" && as_fn_error $? "no acceptable cc found in \$PATH" "$LINENO" 5
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using GNU C" >&5
-$as_echo_n "checking whether we are using GNU C... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_c_compiler_gnu=yes
-else
- ac_cv_c_compiler_gnu=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-
-if test $ac_cv_c_compiler_gnu = yes; then
- GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
- fi
-else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AS"; then
- ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AS="${ac_tool_prefix}as"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AS"; then
- ac_ct_AS=$AS
- # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AS+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AS"; then
- ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AS="as"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_AS" = x; then
- AS=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AS=$ac_ct_AS
- fi
-else
- AS="$ac_cv_prog_AS"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AR="${ac_tool_prefix}ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_AR"; then
- ac_ct_AR=$AR
- # Extract the first word of "ar", so it can be a program name with args.
-set dummy ar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_AR="ar"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_AR" = x; then
- AR=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-else
- AR="$ac_cv_prog_AR"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args.
-set dummy ${ac_tool_prefix}readelf; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_READELF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$READELF"; then
- ac_cv_prog_READELF="$READELF" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_READELF="${ac_tool_prefix}readelf"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-READELF=$ac_cv_prog_READELF
-if test -n "$READELF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $READELF" >&5
-$as_echo "$READELF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_READELF"; then
- ac_ct_READELF=$READELF
- # Extract the first word of "readelf", so it can be a program name with args.
-set dummy readelf; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_READELF+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_READELF"; then
- ac_cv_prog_ac_ct_READELF="$ac_ct_READELF" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_READELF="readelf"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_READELF=$ac_cv_prog_ac_ct_READELF
-if test -n "$ac_ct_READELF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_READELF" >&5
-$as_echo "$ac_ct_READELF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_READELF" = x; then
- READELF=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- READELF=$ac_ct_READELF
- fi
-else
- READELF="$ac_cv_prog_READELF"
-fi
-
-
-
-
-# Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */
-ac_given_INSTALL=$INSTALL
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
-$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
- # Check whether --enable-maintainer-mode was given.
-if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
-$as_echo "$USE_MAINTAINER_MODE" >&6; }
- if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-# By default we simply use the C compiler to build assembly code.
-
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-
-
-
-
-# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which can't create executables. So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
-
- dummy_var=1
-fi
-
-. ${newlib_basedir}/configure.host
-
-newlib_cflags="${newlib_cflags} -fno-builtin"
-
-NEWLIB_CFLAGS=${newlib_cflags}
-
-
-NO_INCLUDE_LIST=${noinclude}
-
-
-LDFLAGS=${ldflags}
-
-
- if test x${newlib_elix_level} = x0; then
- ELIX_LEVEL_0_TRUE=
- ELIX_LEVEL_0_FALSE='#'
-else
- ELIX_LEVEL_0_TRUE='#'
- ELIX_LEVEL_0_FALSE=
-fi
-
- if test x${newlib_elix_level} = x1; then
- ELIX_LEVEL_1_TRUE=
- ELIX_LEVEL_1_FALSE='#'
-else
- ELIX_LEVEL_1_TRUE='#'
- ELIX_LEVEL_1_FALSE=
-fi
-
- if test x${newlib_elix_level} = x2; then
- ELIX_LEVEL_2_TRUE=
- ELIX_LEVEL_2_FALSE='#'
-else
- ELIX_LEVEL_2_TRUE='#'
- ELIX_LEVEL_2_FALSE=
-fi
-
- if test x${newlib_elix_level} = x3; then
- ELIX_LEVEL_3_TRUE=
- ELIX_LEVEL_3_FALSE='#'
-else
- ELIX_LEVEL_3_TRUE='#'
- ELIX_LEVEL_3_FALSE=
-fi
-
- if test x${newlib_elix_level} = x4; then
- ELIX_LEVEL_4_TRUE=
- ELIX_LEVEL_4_FALSE='#'
-else
- ELIX_LEVEL_4_TRUE='#'
- ELIX_LEVEL_4_FALSE=
-fi
-
-
- if test x${use_libtool} = xyes; then
- USE_LIBTOOL_TRUE=
- USE_LIBTOOL_FALSE='#'
-else
- USE_LIBTOOL_TRUE='#'
- USE_LIBTOOL_FALSE=
-fi
-
-
-# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we
-# use oext, which is set in configure.host based on the target platform.
-OBJEXT=${oext}
-
-
-
-
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
- g
- s/^\n//
- s/\n/ /g
- p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-U=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${MAY_SUPPLY_SYSCALLS_TRUE}" && test -z "${MAY_SUPPLY_SYSCALLS_FALSE}"; then
- as_fn_error $? "conditional \"MAY_SUPPLY_SYSCALLS\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
- as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ELIX_LEVEL_0_TRUE}" && test -z "${ELIX_LEVEL_0_FALSE}"; then
- as_fn_error $? "conditional \"ELIX_LEVEL_0\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ELIX_LEVEL_1_TRUE}" && test -z "${ELIX_LEVEL_1_FALSE}"; then
- as_fn_error $? "conditional \"ELIX_LEVEL_1\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ELIX_LEVEL_2_TRUE}" && test -z "${ELIX_LEVEL_2_FALSE}"; then
- as_fn_error $? "conditional \"ELIX_LEVEL_2\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ELIX_LEVEL_3_TRUE}" && test -z "${ELIX_LEVEL_3_FALSE}"; then
- as_fn_error $? "conditional \"ELIX_LEVEL_3\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${ELIX_LEVEL_4_TRUE}" && test -z "${ELIX_LEVEL_4_FALSE}"; then
- as_fn_error $? "conditional \"ELIX_LEVEL_4\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${USE_LIBTOOL_TRUE}" && test -z "${USE_LIBTOOL_FALSE}"; then
- as_fn_error $? "conditional \"USE_LIBTOOL\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by newlib $as_me 2.2.0, which was
-generated by GNU Autoconf 2.68. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-newlib config.status 2.2.0
-configured by $0, generated by GNU Autoconf 2.68,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2010 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h | --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-
-eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
-
-
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
git://sourceware.org / newlib-cygwin.git / commitdiff