# Configuration option allocation/raid_stripe_all_devices.
# Stripe across all PVs when RAID stripes are not specified.
- # If enabled, all PVs in the VG or on the command line are used for raid0/4/5/6/10
- # when the command does not specify the number of stripes to use.
+ # If enabled, all PVs in the VG or on the command line are used for
+ # raid0/4/5/6/10 when the command does not specify the number of
+ # stripes to use.
# This was the default behaviour until release 2.02.162.
# This configuration option has an automatic default value.
# raid_stripe_all_devices = 0
use_lvmetad = @DEFAULT_USE_LVMETAD@
# Configuration option global/lvmetad_update_wait_time.
- # The number of seconds a command will wait for lvmetad update to finish.
+ # Number of seconds a command will wait for lvmetad update to finish.
# After waiting for this period, a command will not use lvmetad, and
# will revert to disk scanning.
# This configuration option has an automatic default value.
if the list is set but empty, no LVs match.
Autoactivation should be used during system boot to make it possible
to select which LVs should be automatically activated by the system.
-See lvmlockd(8) for more information about activation options \fBey\fP and \fBsy\fP for shared VGs.
-See clvmd(8) for more information about activation options \fBey\fP, \fBsy\fP, \fBly\fP and \fBln\fP for clustered VGs.
+See \fBlvmlockd\fP(8) for more information about activation options \fBey\fP and \fBsy\fP for shared VGs.
+See \fBclvmd\fP(8) for more information about activation options \fBey\fP, \fBsy\fP, \fBly\fP and \fBln\fP for clustered VGs.
.ad b
.HP
.ad l
\fB--addtag\fP \fITag\fP
.br
Adds a tag to a PV, VG or LV. This option can be repeated to add
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
\fB--deltag\fP \fITag\fP
.br
Deletes a tag from a PV, VG or LV. This option can be repeated to delete
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
Start (yes) or stop (no) monitoring an LV with dmeventd.
dmeventd monitors kernel events for an LV, and performs
automated maintenance for the LV in reponse to specific events.
-See dmeventd(8) for more information.
+See \fBdmeventd\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
If autoactivation \fBay\fP is used, the LV is only activated
if it matches an item in lvm.conf activation/auto_activation_volume_list.
\fBay\fP implies --zero n and --wipesignatures n.
-See lvmlockd(8) for more information about activation options for shared VGs.
-See clvmd(8) for more information about activation options for clustered VGs.
+See \fBlvmlockd\fP(8) for more information about activation options for shared VGs.
+See \fBclvmd\fP(8) for more information about activation options for clustered VGs.
.ad b
.HP
.ad l
\fB--addtag\fP \fITag\fP
.br
Adds a tag to a PV, VG or LV. This option can be repeated to add
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
Start (yes) or stop (no) monitoring an LV with dmeventd.
dmeventd monitors kernel events for an LV, and performs
automated maintenance for the LV in reponse to specific events.
-See dmeventd(8) for more information.
+See \fBdmeventd\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-c\fP|\fB--colon\fP
.br
Generate colon separated output for easier parsing in scripts or programs.
-Also see vgs(8) which provides considerably more control over the output.
+Also see \fBvgs\fP(8) which provides considerably more control over the output.
.ad b
.HP
.ad l
\fB-C\fP|\fB--columns\fP
.br
-Display output in columns, the equivalent of vgs(8).
-Options listed are the same as options given in vgs(8).
+Display output in columns, the equivalent of \fBvgs\fP(8).
+Options listed are the same as options given in \fBvgs\fP(8).
.ad b
.HP
.ad l
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
(under a per-VG lock) so it is consistent. Information gathered from
separate calls to \fBvgs\fP, \fBpvs\fP, and \fBlvs\fP can be inconsistent
if information changes between commands.
-
.SH USAGE
\fBlvm fullreport\fP
.br
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad l
\fB--ignorelocal\fP
.br
-Ignore local section.
+Ignore the local section. The local section should be defined in
+the lvmlocal.conf file, and should contain config settings
+specific to the local host which should not be copied to
+other hosts.
.ad b
.HP
.ad l
.ad l
\fB--typeconfig\fP \fBcurrent\fP|\fBdefault\fP|\fBdiff\fP|\fBfull\fP|\fBlist\fP|\fBmissing\fP|\fBnew\fP|\fBprofilable\fP|\fBprofilable-command\fP|\fBprofilable-metadata\fP
.br
-See lvmreport(7).
+\fBcurrent\fP prints the config settings that would be applied
+to an lvm command (assuming the command does not override them
+on the command line.) This includes:
+settings that have been modified in lvm config files,
+settings that get their default values from config files,
+and default settings that have been uncommented in config files.
+\fBdefault\fP prints all settings with their default values.
+Changes made in lvm config files are not reflected in the output.
+Some settings get their default values internally,
+and these settings are printed as comments.
+Other settings get their default values from config files,
+and these settings are not printed as comments.
+\fBdiff\fP prints only config settings that have been modified
+from their default values in config files (the difference between
+current and default.)
+\fBfull\fP prints every setting uncommented and set to the
+current value, i.e. how it would be used by an lvm command.
+This includes settings modified in config files, settings that usually
+get defaults internally, and settings that get defaults from config files.
+\fBlist\fP prints all config names without values.
+\fBmissing\fP prints settings that are missing from the
+lvm config files. A missing setting that usually gets its default
+from config files is printed uncommented and set to the internal default.
+Settings that get their default internally and are not set in config files
+are printed commented with the internal default.
+\fBnew\fP prints config settings that have been added since
+the lvm version specified by --sinceversion. They are printed
+with their default values.
+\fBprofilable\fP prints settings with their default values that can be set from a profile.
+\fBprofilable-command\fP prints settings with their default values that can be set from a command profile.
+\fBprofilable-metadata\fP prints settings with their default values that can be set from a metadata profile.
+Also see \fBlvm.conf\fP(5).
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.br
.SH DESCRIPTION
pvchange changes PV attributes in the VG.
+
+For options listed in parentheses, any one is required, after which the
+others are optional.
.SH USAGE
Change properties of all PVs.
.br
\fB--addtag\fP \fITag\fP
.br
Adds a tag to a PV, VG or LV. This option can be repeated to add
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB-a\fP|\fB--all\fP
.br
+Change all visible PVs.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
\fB--deltag\fP \fITag\fP
.br
Deletes a tag from a PV, VG or LV. This option can be repeated to delete
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
Specify a UUID for the device.
Without this option, a random UUID is generated.
This option is needed before restoring a backup of LVM metadata
-onto a replacement device; see vgcfgrestore(8). As such, use of
+onto a replacement device; see \fBvgcfgrestore\fP(8). As such, use of
--restorefile is compulsory unless the --norestorefile is used.
All PVs must have unique UUIDs, and LVM will prevent certain operations
if multiple devices are seen with the same UUID.
-See vgimportclone(8) for more information.
+See \fBvgimportclone\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-c\fP|\fB--colon\fP
.br
Generate colon separated output for easier parsing in scripts or programs.
-Also see vgs(8) which provides considerably more control over the output.
+Also see \fBvgs\fP(8) which provides considerably more control over the output.
.ad b
.HP
.ad l
\fB-C\fP|\fB--columns\fP
.br
-Display output in columns, the equivalent of vgs(8).
-Options listed are the same as options given in vgs(8).
+Display output in columns, the equivalent of \fBvgs\fP(8).
+Options listed are the same as options given in \fBvgs\fP(8).
.ad b
.HP
.ad l
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad b
.br
.ad l
-[ \fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP ]
+[ \fB-a\fP|\fB--activate\fP \fBay\fP ]
.ad b
.br
.ad l
.ad l
\fB-a\fP|\fB--activate\fP \fBy\fP|\fBn\fP|\fBay\fP
.br
+Auto-activate LVs in a VG when the PVs scanned have completed the VG.
+(Only \fBay\fP is applicable.)
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
if the list is set but empty, no LVs match.
Autoactivation should be used during system boot to make it possible
to select which LVs should be automatically activated by the system.
-See lvmlockd(8) for more information about activation options \fBey\fP and \fBsy\fP for shared VGs.
-See clvmd(8) for more information about activation options \fBey\fP, \fBsy\fP, \fBly\fP and \fBln\fP for clustered VGs.
+See \fBlvmlockd\fP(8) for more information about activation options \fBey\fP and \fBsy\fP for shared VGs.
+See \fBclvmd\fP(8) for more information about activation options \fBey\fP, \fBsy\fP, \fBly\fP and \fBln\fP for clustered VGs.
.ad b
.HP
.ad l
\fB--addtag\fP \fITag\fP
.br
Adds a tag to a PV, VG or LV. This option can be repeated to add
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
\fB-c\fP|\fB--clustered\fP \fBy\fP|\fBn\fP
.br
Change the clustered property of a VG using clvmd.
-See clvmd(8) for more information about clustered VGs.
+See \fBclvmd\fP(8) for more information about clustered VGs.
.ad b
.HP
.ad l
\fB--deltag\fP \fITag\fP
.br
Deletes a tag from a PV, VG or LV. This option can be repeated to delete
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
.br
Start the lockspace of a shared VG in lvmlockd.
lvmlockd locks becomes available for the VG, allowing LVM to use the VG.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
.br
Stop the lockspace of a shared VG in lvmlockd.
lvmlockd locks become unavailable for the VG, preventing LVM from using the VG.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
\fB--locktype\fP \fBsanlock\fP|\fBdlm\fP|\fBnone\fP
.br
Change the VG lock type to or from a shared lock type used with lvmlockd.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
Start (yes) or stop (no) monitoring an LV with dmeventd.
dmeventd monitors kernel events for an LV, and performs
automated maintenance for the LV in reponse to specific events.
-See dmeventd(8) for more information.
+See \fBdmeventd\fP(8) for more information.
.ad b
.HP
.ad l
Changes the system ID of the VG. Using this option requires caution
because the VG may become foreign to the host running the command,
leaving the host unable to access it.
-See lvmsystemid(7) for more information.
+See \fBlvmsystemid\fP(7) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB--addtag\fP \fITag\fP
.br
Adds a tag to a PV, VG or LV. This option can be repeated to add
-multiple tags at once. See lvm(8) for information about tags.
+multiple tags at once. See \fBlvm\fP(8) for information about tags.
.ad b
.HP
.ad l
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
This allows multiple hosts to share a VG on shared devices.
clvmd and a lock manager must be configured and running.
(A clustered VG using clvmd is different from a shared VG using lvmlockd.)
-See clvmd(8) for more information about clustered VGs.
+See \fBclvmd\fP(8) for more information about clustered VGs.
.ad b
.HP
.ad l
\fB--lockopt\fP \fIString\fP
.br
Used to pass options for special cases to lvmlockd.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
\fB--locktype\fP \fBsanlock\fP|\fBdlm\fP|\fBnone\fP
.br
Specify the VG lock type directly in place of using --shared.
-See lvmlockd(8) for more information.
+See \fBlvmlockd\fP(8) for more information.
.ad b
.HP
.ad l
manager is running. This allows multiple hosts to share a VG on shared
devices. lvmlockd and a lock manager must be configured and running.
(A shared VG using lvmlockd is different from a clustered VG using clvmd.)
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
the host creating it. Using this option requires caution because the
system ID of the new VG may not match the system ID of the host running
the command, leaving the VG inaccessible to the host.
-See lvmsystemid(7) for more information.
+See \fBlvmsystemid\fP(7) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-c\fP|\fB--colon\fP
.br
Generate colon separated output for easier parsing in scripts or programs.
-Also see vgs(8) which provides considerably more control over the output.
+Also see \fBvgs\fP(8) which provides considerably more control over the output.
.ad b
.HP
.ad l
\fB-C\fP|\fB--columns\fP
.br
-Display output in columns, the equivalent of vgs(8).
-Options listed are the same as options given in vgs(8).
+Display output in columns, the equivalent of \fBvgs\fP(8).
+Options listed are the same as options given in \fBvgs\fP(8).
.ad b
.HP
.ad l
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.SH DESCRIPTION
vgexport makes inactive VGs unknown to the system. In this state, all the
PVs in the VG can be moved to a different system, from which
-\fBvgimport\fP can then be run.
+\fBvgimport\fP(8) can then be run.
Most LVM tools ignore exported VGs.
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad l
\fB-a\fP|\fB--all\fP
.br
+Import all visible VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.ad l
\fB--configreport\fP \fBlog\fP|\fBvg\fP|\fBlv\fP|\fBpv\fP|\fBpvseg\fP|\fBseg\fP
.br
-See lvmreport(7).
+See \fBlvmreport\fP(7).
.ad b
.HP
.ad l
\fB--foreign\fP
.br
Report/display foreign VGs that would otherwise be skipped.
-See lvmsystemid(7) for more information about foreign VGs.
+See \fBlvmsystemid\fP(7) for more information about foreign VGs.
.ad b
.HP
.ad l
\fBseg_all\fP all LV segment fields, and
\fBpvseg_all\fP all PV segment columns.
See the lvm.conf report section for more config options.
-See lvmreport(7) for more information about reporting.
+See \fBlvmreport\fP(7) for more information about reporting.
.ad b
.HP
.ad l
.br
Report/display shared VGs that would otherwise be skipped when
lvmlockd is not being used on the host.
-See lvmlockd(8) for more information about shared VGs.
+See \fBlvmlockd\fP(8) for more information about shared VGs.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)
\fB-A\fP|\fB--autobackup\fP \fBy\fP|\fBn\fP
.br
Specifies if metadata should be backed up automatically after a change.
-Enabling this is strongly advised! See vgcfgbackup(8) for more information.
+Enabling this is strongly advised! See \fBvgcfgbackup\fP(8) for more information.
.ad b
.HP
.ad l
.BR lvs (8)
.BR lvscan (8)
+.BR lvm-fullreport (8)
+.BR lvm-lvpoll (8)
.BR lvm2-activation-generator (8)
.BR blkdeactivate (8)
.BR lvmdump (8)