--- /dev/null
+/* Copyright (c) 2013, Linaro Limited
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of the Linaro nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
+
+#if (defined (__OPTIMIZE_SIZE__) || defined (PREFER_SIZE_OVER_SPEED))
+/* See memmove-stub.c */
+#else
+
+/* Assumptions:
+ *
+ * ARMv8-a, AArch64
+ * Unaligned accesses
+ */
+
+ .macro def_fn f p2align=0
+ .text
+ .p2align \p2align
+ .global \f
+ .type \f, %function
+\f:
+ .endm
+
+/* Parameters and result. */
+#define dstin x0
+#define src x1
+#define count x2
+#define tmp1 x3
+#define tmp1w w3
+#define tmp2 x4
+#define tmp2w w4
+#define tmp3 x5
+#define tmp3w w5
+#define dst x6
+
+#define A_l x7
+#define A_h x8
+#define B_l x9
+#define B_h x10
+#define C_l x11
+#define C_h x12
+#define D_l x13
+#define D_h x14
+
+def_fn memmove, 6
+ cmp dstin, src
+ b.lo .Ldownwards
+ add tmp1, src, count
+ cmp dstin, tmp1
+ b.hs memcpy /* No overlap. */
+
+ /* Upwards move with potential overlap.
+ * Need to move from the tail backwards. SRC and DST point one
+ * byte beyond the remaining data to move. */
+ add dst, dstin, count
+ add src, src, count
+ cmp count, #64
+ b.ge .Lmov_not_short_up
+
+ /* Deal with small moves quickly by dropping straight into the
+ * exit block. */
+.Ltail63up:
+ /* Move up to 48 bytes of data. At this point we only need the
+ * bottom 6 bits of count to be accurate. */
+ ands tmp1, count, #0x30
+ b.eq .Ltail15up
+ sub dst, dst, tmp1
+ sub src, src, tmp1
+ cmp tmp1w, #0x20
+ b.eq 1f
+ b.lt 2f
+ ldp A_l, A_h, [src, #32]
+ stp A_l, A_h, [dst, #32]
+1:
+ ldp A_l, A_h, [src, #16]
+ stp A_l, A_h, [dst, #16]
+2:
+ ldp A_l, A_h, [src]
+ stp A_l, A_h, [dst]
+.Ltail15up:
+ /* Move up to 15 bytes of data. Does not assume additional data
+ * being moved. */
+ tbz count, #3, 1f
+ ldr tmp1, [src, #-8]!
+ str tmp1, [dst, #-8]!
+1:
+ tbz count, #2, 1f
+ ldr tmp1w, [src, #-4]!
+ str tmp1w, [dst, #-4]!
+1:
+ tbz count, #1, 1f
+ ldrh tmp1w, [src, #-2]!
+ strh tmp1w, [dst, #-2]!
+1:
+ tbz count, #0, 1f
+ ldrb tmp1w, [src, #-1]
+ strb tmp1w, [dst, #-1]
+1:
+ ret
+
+.Lmov_not_short_up:
+ /* We don't much care about the alignment of DST, but we want SRC
+ * to be 128-bit (16 byte) aligned so that we don't cross cache line
+ * boundaries on both loads and stores. */
+ ands tmp2, src, #15 /* Bytes to reach alignment. */
+ b.eq 2f
+ sub count, count, tmp2
+ /* Move enough data to reach alignment; unlike memcpy, we have to
+ * be aware of the overlap, which means we can't move data twice. */
+ tbz tmp2, #3, 1f
+ ldr tmp1, [src, #-8]!
+ str tmp1, [dst, #-8]!
+1:
+ tbz tmp2, #2, 1f
+ ldr tmp1w, [src, #-4]!
+ str tmp1w, [dst, #-4]!
+1:
+ tbz tmp2, #1, 1f
+ ldrh tmp1w, [src, #-2]!
+ strh tmp1w, [dst, #-2]!
+1:
+ tbz tmp2, #0, 1f
+ ldrb tmp1w, [src, #-1]!
+ strb tmp1w, [dst, #-1]!
+1:
+
+ /* There may be less than 63 bytes to go now. */
+ cmp count, #63
+ b.le .Ltail63up
+2:
+ subs count, count, #128
+ b.ge .Lmov_body_large_up
+ /* Less than 128 bytes to move, so handle 64 here and then jump
+ * to the tail. */
+ ldp A_l, A_h, [src, #-64]!
+ ldp B_l, B_h, [src, #16]
+ ldp C_l, C_h, [src, #32]
+ ldp D_l, D_h, [src, #48]
+ stp A_l, A_h, [dst, #-64]!
+ stp B_l, B_h, [dst, #16]
+ stp C_l, C_h, [dst, #32]
+ stp D_l, D_h, [dst, #48]
+ tst count, #0x3f
+ b.ne .Ltail63up
+ ret
+
+ /* Critical loop. Start at a new Icache line boundary. Assuming
+ * 64 bytes per line this ensures the entire loop is in one line. */
+ .p2align 6
+.Lmov_body_large_up:
+ /* There are at least 128 bytes to move. */
+ ldp A_l, A_h, [src, #-16]
+ ldp B_l, B_h, [src, #-32]
+ ldp C_l, C_h, [src, #-48]
+ ldp D_l, D_h, [src, #-64]!
+1:
+ stp A_l, A_h, [dst, #-16]
+ ldp A_l, A_h, [src, #-16]
+ stp B_l, B_h, [dst, #-32]
+ ldp B_l, B_h, [src, #-32]
+ stp C_l, C_h, [dst, #-48]
+ ldp C_l, C_h, [src, #-48]
+ stp D_l, D_h, [dst, #-64]!
+ ldp D_l, D_h, [src, #-64]!
+ subs count, count, #64
+ b.ge 1b
+ stp A_l, A_h, [dst, #-16]
+ stp B_l, B_h, [dst, #-32]
+ stp C_l, C_h, [dst, #-48]
+ stp D_l, D_h, [dst, #-64]!
+ tst count, #0x3f
+ b.ne .Ltail63up
+ ret
+
+
+.Ldownwards:
+ /* For a downwards move we can safely use memcpy provided that
+ * DST is more than 16 bytes away from SRC. */
+ sub tmp1, src, #16
+ cmp dstin, tmp1
+ b.ls memcpy /* May overlap, but not critically. */
+
+ mov dst, dstin /* Preserve DSTIN for return value. */
+ cmp count, #64
+ b.ge .Lmov_not_short_down
+
+ /* Deal with small moves quickly by dropping straight into the
+ * exit block. */
+.Ltail63down:
+ /* Move up to 48 bytes of data. At this point we only need the
+ * bottom 6 bits of count to be accurate. */
+ ands tmp1, count, #0x30
+ b.eq .Ltail15down
+ add dst, dst, tmp1
+ add src, src, tmp1
+ cmp tmp1w, #0x20
+ b.eq 1f
+ b.lt 2f
+ ldp A_l, A_h, [src, #-48]
+ stp A_l, A_h, [dst, #-48]
+1:
+ ldp A_l, A_h, [src, #-32]
+ stp A_l, A_h, [dst, #-32]
+2:
+ ldp A_l, A_h, [src, #-16]
+ stp A_l, A_h, [dst, #-16]
+.Ltail15down:
+ /* Move up to 15 bytes of data. Does not assume additional data
+ being moved. */
+ tbz count, #3, 1f
+ ldr tmp1, [src], #8
+ str tmp1, [dst], #8
+1:
+ tbz count, #2, 1f
+ ldr tmp1w, [src], #4
+ str tmp1w, [dst], #4
+1:
+ tbz count, #1, 1f
+ ldrh tmp1w, [src], #2
+ strh tmp1w, [dst], #2
+1:
+ tbz count, #0, 1f
+ ldrb tmp1w, [src]
+ strb tmp1w, [dst]
+1:
+ ret
+
+.Lmov_not_short_down:
+ /* We don't much care about the alignment of DST, but we want SRC
+ * to be 128-bit (16 byte) aligned so that we don't cross cache line
+ * boundaries on both loads and stores. */
+ neg tmp2, src
+ ands tmp2, tmp2, #15 /* Bytes to reach alignment. */
+ b.eq 2f
+ sub count, count, tmp2
+ /* Move enough data to reach alignment; unlike memcpy, we have to
+ * be aware of the overlap, which means we can't move data twice. */
+ tbz tmp2, #3, 1f
+ ldr tmp1, [src], #8
+ str tmp1, [dst], #8
+1:
+ tbz tmp2, #2, 1f
+ ldr tmp1w, [src], #4
+ str tmp1w, [dst], #4
+1:
+ tbz tmp2, #1, 1f
+ ldrh tmp1w, [src], #2
+ strh tmp1w, [dst], #2
+1:
+ tbz tmp2, #0, 1f
+ ldrb tmp1w, [src], #1
+ strb tmp1w, [dst], #1
+1:
+
+ /* There may be less than 63 bytes to go now. */
+ cmp count, #63
+ b.le .Ltail63down
+2:
+ subs count, count, #128
+ b.ge .Lmov_body_large_down
+ /* Less than 128 bytes to move, so handle 64 here and then jump
+ * to the tail. */
+ ldp A_l, A_h, [src]
+ ldp B_l, B_h, [src, #16]
+ ldp C_l, C_h, [src, #32]
+ ldp D_l, D_h, [src, #48]
+ stp A_l, A_h, [dst]
+ stp B_l, B_h, [dst, #16]
+ stp C_l, C_h, [dst, #32]
+ stp D_l, D_h, [dst, #48]
+ tst count, #0x3f
+ add src, src, #64
+ add dst, dst, #64
+ b.ne .Ltail63down
+ ret
+
+ /* Critical loop. Start at a new cache line boundary. Assuming
+ * 64 bytes per line this ensures the entire loop is in one line. */
+ .p2align 6
+.Lmov_body_large_down:
+ /* There are at least 128 bytes to move. */
+ ldp A_l, A_h, [src, #0]
+ sub dst, dst, #16 /* Pre-bias. */
+ ldp B_l, B_h, [src, #16]
+ ldp C_l, C_h, [src, #32]
+ ldp D_l, D_h, [src, #48]! /* src += 64 - Pre-bias. */
+1:
+ stp A_l, A_h, [dst, #16]
+ ldp A_l, A_h, [src, #16]
+ stp B_l, B_h, [dst, #32]
+ ldp B_l, B_h, [src, #32]
+ stp C_l, C_h, [dst, #48]
+ ldp C_l, C_h, [src, #48]
+ stp D_l, D_h, [dst, #64]!
+ ldp D_l, D_h, [src, #64]!
+ subs count, count, #64
+ b.ge 1b
+ stp A_l, A_h, [dst, #16]
+ stp B_l, B_h, [dst, #32]
+ stp C_l, C_h, [dst, #48]
+ stp D_l, D_h, [dst, #64]
+ add src, src, #16
+ add dst, dst, #64 + 16
+ tst count, #0x3f
+ b.ne .Ltail63down
+ ret
+ .size memmove, . - memmove
+#endif
git://sourceware.org / newlib-cygwin.git / commitdiff