--- /dev/null
+/* Optimized memcpy implementation for PowerPC64.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ 02111-1307 USA. */
+
+#include <sysdep.h>
+#include <bp-sym.h>
+#include <bp-asm.h>
+
+/* __ptr_t [r3] memcpy (__ptr_t dst [r3], __ptr_t src [r4], size_t len [r5]);
+ Returns 'dst'.
+
+ Memcpy handles short copies (< 32-bytes) using an unaligned
+ word lwz/stw loop. The tail (remaining 1-3) bytes is handled with the
+ appropriate combination of byte and halfword load/stores. There is no
+ attempt to optimize the alignment of short moves. The 64-bit
+ implementations of POWER3 and POWER4 do a reasonable job of handling
+ unligned load/stores that do not cross 32-byte boundries.
+
+ Longer moves (>= 32-bytes) justify the effort to get at least the
+ destination doubleword (8-byte) aligned. Further optimization is
+ posible when both source and destination are doubleword aligned.
+ Each case has a optimized unrolled loop. */
+
+EALIGN (BP_SYM (memcpy), 5, 0)
+ cmpldi cr1,5,31
+ neg 0,3
+ std 30,-16(1)
+ std 31,-8(1)
+ rldicl. 0,0,0,61
+ mr 12,4
+ mr 31,5
+ mr 30,3
+ ble- cr1,.L2
+ subf 31,0,5
+
+ /* Move 0-7 bytes as needed to get the destination doubleword alligned. */
+ beq 0f
+ mtcrf 0x01,0
+1: bf 31,2f
+ lbz 6,0(12)
+ addi 12,12,1
+ stb 6,0(3)
+ addi 3,3,1
+2: bf 30,4f
+ lhz 6,0(12)
+ addi 12,12,2
+ sth 6,0(3)
+ addi 3,3,2
+4: bf 29,0f
+ lwz 6,0(12)
+ addi 12,12,4
+ stw 6,0(3)
+ addi 3,3,4
+0:
+ /* Copy doublewords from source to destination, assumpting the
+ destination is aligned on a doubleword boundary.
+
+ First verify that there is > 7 bytes to copy and check if the source
+ is also doubleword aligned. If there are < 8 bytes to copy fall
+ through to the tail byte copy code. Otherwise if the source and
+ destination are both doubleword aligned use an optimized doubleword
+ copy loop. Otherwise the source has a different alignment and we use
+ a load, shift, store strategy. */
+ rldicl. 0,12,0,61
+ cmpldi cr6,31,7
+ ble- cr6,.L2 /* less than 8 bytes left. */
+ bne- 0,.L6 /* Source is not DW aligned. */
+ srdi. 9,31,3
+ mr 10,3
+ mr 11,12
+
+ /* Move doublewords where destination and source are aligned.
+ Use a unrolled loop to copy 4 doubleword (32-bytes) per iteration.
+ If the remainder is >0 and < 32 bytes copy 1-3 doublewords. */
+ cmpldi cr1,9,4
+ beq 0f
+ mtcrf 0x01,9
+ blt cr1,2f
+ ld 6,0(11)
+ .align 4
+4:
+ ld 7,8(11)
+ addi 9,9,-4
+ std 6,0(10)
+ ld 6,16(11)
+ std 7,8(10)
+ ld 7,24(11)
+ addi 11,11,32
+ cmpldi cr1,9,4
+ std 6,16(10)
+ blt cr1,3f
+ ld 6,0(11)
+ std 7,24(10)
+ addi 10,10,32
+ b 4b
+3: std 7,24(10)
+ addi 10,10,32
+2: bf 30,1f
+ ld 6,0(11)
+ ld 7,8(11)
+ addi 11,11,16
+ std 6,0(10)
+ std 7,8(10)
+ addi 10,10,16
+1: bf 31,0f
+ ld 6,0(11)
+ addi 11,11,8
+ std 6,0(10)
+ addi 10,10,8
+0:
+
+.L8:
+ rldicr 0,31,0,60
+ rldicl 31,31,0,61
+ add 3,3,0
+ add 12,12,0
+
+ /* Copy the tail for up to 31 bytes. If this is the tail of a longer
+ copy then the destination will be aligned and the length will be
+ less than 8. So it is normally not worth the set-up overhead to
+ get doubleword aligned and do doubleword load/store. */
+.L2:
+ mr. 10,31
+ cmpldi cr1,31,4
+ beq 0f
+ mtcrf 0x01,31
+ blt cr1,2f
+4: lwz 6,0(12)
+ addi 12,12,4
+ addi 10,10,-4
+ stw 6,0(3)
+ cmpldi cr1,10,4
+ addi 3,3,4
+ bge cr1,4b
+2: bf 30,1f
+ lhz 6,0(12)
+ addi 12,12,2
+ sth 6,0(3)
+ addi 3,3,2
+1: bf 31,0f
+ lbz 6,0(12)
+ addi 12,12,1
+ stb 6,0(3)
+ addi 3,3,1
+0:
+ /* Return original dst pointer. */
+ ld 31,-8(1)
+ mr 3,30
+ ld 30,-16(1)
+ blr
+
+.L6:
+ srdi 11,31,3
+ mr 4,3
+ mr 5,12
+
+ /* Copy doublewords where the destination is aligned but the source is
+ not. Use aligned doubleword loads from the source, shifted to realign
+ the data, to allow aligned destination stores. */
+ andi. 10,5,7
+ andi. 0,11,1
+ subf 5,10,5
+ ld 6,0(5)
+ sldi 10,10,3
+ ld 7,8(5)
+ subfic 9,10,64
+ beq 2f
+ sld 0,6,10
+ addi 11,11,-1
+ mr 6,7
+ addi 4,4,-8
+ cmpldi 11,0
+ b 1f
+2: addi 5,5,8
+ .align 4
+0: sld 0,6,10
+ srd 8,7,9
+ addi 11,11,-2
+ ld 6,8(5)
+ or 0,0,8
+ cmpldi 11,0
+ std 0,0(4)
+ sld 0,7,10
+1: srd 8,6,9
+ or 0,0,8
+ beq 8f
+ ld 7,16(5)
+ std 0,8(4)
+ addi 5,5,16
+ addi 4,4,16
+ b 0b
+8:
+ std 0,8(4)
+ b .L8
+END_GEN_TB (BP_SYM (memcpy),TB_TOCLESS)
git://sourceware.org / glibc.git / commitdiff