* Makefile.am (maintainer-check): Check for unquoted $(DESTDIR) uses.

* lib/am/data.am, lib/am/distdir.am, lib/am/java.am, lib/am/libs.am,
lib/am/lisp.am, lib/am/ltlib.am, lib/am/mans.am, lib/am/progs.am,
lib/am/python.am, lib/am/scripts.am, lib/am/texinfos.am: Quote
installation paths in install, uninstall, and installcheck rules,
as well as in am__installdirs variables.  This is for the sake
of paths containing spaces.
* lib/am/install.am (installdirs-am, installdirs): Do not try
to create "" directories.
* test/instspc.test: New file.
* test/Makefile.am (TESTS): Add instspc.test.
Report from James Amundson.

diff --git a/ChangeLog b/ChangeLog
index 200abb98746d643f6b951dc7e5f276804cde44d8..2ebad40f2cc591a99b9f3b51d8c0f01c89bc4331 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,5 +1,18 @@
 2004-01-28  Alexandre Duret-Lutz  <adl@gnu.org>
 
+       * Makefile.am (maintainer-check): Check for unquoted $(DESTDIR) uses.
+       * lib/am/data.am, lib/am/distdir.am, lib/am/java.am, lib/am/libs.am,
+       lib/am/lisp.am, lib/am/ltlib.am, lib/am/mans.am, lib/am/progs.am,
+       lib/am/python.am, lib/am/scripts.am, lib/am/texinfos.am: Quote
+       installation paths in install, uninstall, and installcheck rules,
+       as well as in am__installdirs variables.  This is for the sake
+       of paths containing spaces.
+       * lib/am/install.am (installdirs-am, installdirs): Do not try
+       to create "" directories.
+       * test/instspc.test: New file.
+       * test/Makefile.am (TESTS): Add instspc.test.
+       Report from James Amundson.
+
        * doc/automake.texi (Not Enough, Third-Party Makefiles): New nodes.
        (Extending): Make it a subsection of Not Enough.
 

diff --git a/Makefile.am b/Makefile.am
index 534e5b1108058b8e1e988b957bff1f450ba5217a..f344e8cc3c9181f38c25bbff5df19e684c6ed711 100644 (file)
--- a/Makefile.am
+++ b/Makefile.am
@@ -252,6 +252,10 @@ maintainer-check: automake aclocal
        @if test `grep -E '^[^#]*@[A-Za-z_0-9]+@' automake | wc -l` -ne 0; then \
          echo "Unresolved @...@ substitution in automake" 1>&2; \
          exit 1; \
+       fi; \
+       if grep -E "[^\'\"]\\\$$\(DESTDIR" $(srcdir)/lib/am/*.am; then \
+         echo 'Suspicious unquoted DESTDIR uses.' 1>&2 ; \
+         exit 1; \
        fi
 
 

diff --git a/Makefile.in b/Makefile.in
index da6b828a672314e55bcf2d9629f7ecae1567e09e..be28b29d2ac6462db51ec220fcdf6b2817f2efc9 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -52,7 +52,7 @@ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno configure.status.lineno
 mkinstalldirs = $(SHELL) $(top_srcdir)/lib/mkinstalldirs
 CONFIG_CLEAN_FILES =
-am__installdirs = $(DESTDIR)$(bindir)
+am__installdirs = "$(DESTDIR)$(bindir)"
 binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
 SCRIPTS = $(bin_SCRIPTS)
 SOURCES =
@@ -206,13 +206,13 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
        cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 install-binSCRIPTS: $(bin_SCRIPTS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(bindir)
+       test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
        @list='$(bin_SCRIPTS)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          if test -f $$d$$p; then \
            f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-           echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
-           $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
+           echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+           $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
          else :; fi; \
        done
 
@@ -220,8 +220,8 @@ uninstall-binSCRIPTS:
        @$(NORMAL_UNINSTALL)
        @list='$(bin_SCRIPTS)'; for p in $$list; do \
          f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-         echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
-         rm -f $(DESTDIR)$(bindir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+         rm -f "$(DESTDIR)$(bindir)/$$f"; \
        done
 uninstall-info-am:
 
@@ -486,7 +486,9 @@ check: check-recursive
 all-am: Makefile $(SCRIPTS)
 installdirs: installdirs-recursive
 installdirs-am:
-       $(mkdir_p) $(DESTDIR)$(bindir)
+       for dir in "$(DESTDIR)$(bindir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-recursive
 install-exec: install-exec-recursive
 install-data: install-data-recursive
@@ -741,6 +743,10 @@ maintainer-check: automake aclocal
        @if test `grep -E '^[^#]*@[A-Za-z_0-9]+@' automake | wc -l` -ne 0; then \
          echo "Unresolved @...@ substitution in automake" 1>&2; \
          exit 1; \
+       fi; \
+       if grep -E "[^\'\"]\\\$$\(DESTDIR" $(srcdir)/lib/am/*.am; then \
+         echo 'Suspicious unquoted DESTDIR uses.' 1>&2 ; \
+         exit 1; \
        fi
 
 cvs-dist: maintainer-check

diff --git a/THANKS b/THANKS
index 2c5d467983f403815e09198fdef6fd610c6549b2..f049c0c8aee6a6cc520b7aa37925288a0d448ad2 100644 (file)
--- a/THANKS
+++ b/THANKS
@@ -88,6 +88,7 @@ Henrik Frystyk Nielsen        frystyk@w3.org
 Ian Lance Taylor       ian@cygnus.com
 Imacat                 imacat@mail.imacat.idv.tw
 Inoue                  inoue@ainet.or.jp
+James Amundson         amundson@users.sourceforge.net
 James Henstridge       james@daa.com.au
 James R. Van Zandt     jrv@vanzandt.mv.com
 James Youngman         jay@gnu.org

diff --git a/doc/Makefile.in b/doc/Makefile.in
index c8daa4dc8b61261372772c9fed28948e5a31ab11..6dd570b46c23fc8351ca338bdbceea414fbd6c06 100644 (file)
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -64,7 +64,7 @@ TEXI2PDF = $(TEXI2DVI) --pdf --batch
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 DVIPS = dvips
-am__installdirs = $(DESTDIR)$(infodir)
+am__installdirs = "$(DESTDIR)$(infodir)"
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -247,8 +247,8 @@ uninstall-info-am:
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
-           echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
-           install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
+           echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+           install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
          done; \
        else :; fi
        @$(NORMAL_UNINSTALL)
@@ -256,7 +256,7 @@ uninstall-info-am:
        for file in $$list; do \
          relfile=`echo "$$file" | sed 's|^.*/||'`; \
          relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-         (if cd $(DESTDIR)$(infodir); then \
+         (if cd "$(DESTDIR)$(infodir)"; then \
             echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
             rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
           else :; fi); \
@@ -372,7 +372,9 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(INFO_DEPS)
 installdirs:
-       $(mkdir_p) $(DESTDIR)$(infodir)
+       for dir in "$(DESTDIR)$(infodir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am
@@ -425,7 +427,7 @@ install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(infodir)
+       test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; \
        for file in $$list; do \
@@ -438,8 +440,8 @@ install-info-am: $(INFO_DEPS)
                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
            if test -f $$ifile; then \
              relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
-             echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
-             $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+             echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
+             $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
            else : ; fi; \
          done; \
        done
@@ -449,8 +451,8 @@ install-info-am: $(INFO_DEPS)
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
-           echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\
-           install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\
+           echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+           install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
          done; \
        else : ; fi
 install-man:

diff --git a/lib/Automake/Makefile.in b/lib/Automake/Makefile.in
index f179f03340567b8a3a0206364fbeb5583d08b3ea..a353d3728fb0b213e809d70d99d9a3510cfc1d75 100644 (file)
--- a/lib/Automake/Makefile.in
+++ b/lib/Automake/Makefile.in
@@ -63,7 +63,7 @@ am__vpath_adj = case $$p in \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = $(DESTDIR)$(perllibdir) $(DESTDIR)$(perllibdir)
+am__installdirs = "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"
 dist_perllibDATA_INSTALL = $(INSTALL_DATA)
 nodist_perllibDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_perllib_DATA) $(nodist_perllib_DATA)
@@ -207,37 +207,37 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 uninstall-info-am:
 install-dist_perllibDATA: $(dist_perllib_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(perllibdir)
+       test -z "$(perllibdir)" || $(mkdir_p) "$(DESTDIR)$(perllibdir)"
        @list='$(dist_perllib_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(dist_perllibDATA_INSTALL) $$d$$p $(DESTDIR)$(perllibdir)/$$f"; \
-         $(dist_perllibDATA_INSTALL) $$d$$p $(DESTDIR)$(perllibdir)/$$f; \
+         echo " $(dist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
+         $(dist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
        done
 
 uninstall-dist_perllibDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dist_perllib_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(perllibdir)/$$f"; \
-         rm -f $(DESTDIR)$(perllibdir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(perllibdir)/$$f'"; \
+         rm -f "$(DESTDIR)$(perllibdir)/$$f"; \
        done
 install-nodist_perllibDATA: $(nodist_perllib_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(perllibdir)
+       test -z "$(perllibdir)" || $(mkdir_p) "$(DESTDIR)$(perllibdir)"
        @list='$(nodist_perllib_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(nodist_perllibDATA_INSTALL) $$d$$p $(DESTDIR)$(perllibdir)/$$f"; \
-         $(nodist_perllibDATA_INSTALL) $$d$$p $(DESTDIR)$(perllibdir)/$$f; \
+         echo " $(nodist_perllibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(perllibdir)/$$f'"; \
+         $(nodist_perllibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(perllibdir)/$$f"; \
        done
 
 uninstall-nodist_perllibDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(nodist_perllib_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(perllibdir)/$$f"; \
-         rm -f $(DESTDIR)$(perllibdir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(perllibdir)/$$f'"; \
+         rm -f "$(DESTDIR)$(perllibdir)/$$f"; \
        done
 
 # This directory's subdirectories are mostly independent; you can cd
@@ -401,7 +401,9 @@ check: check-recursive
 all-am: Makefile $(DATA)
 installdirs: installdirs-recursive
 installdirs-am:
-       $(mkdir_p) $(DESTDIR)$(perllibdir) $(DESTDIR)$(perllibdir)
+       for dir in "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(perllibdir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-recursive
 install-exec: install-exec-recursive
 install-data: install-data-recursive

diff --git a/lib/Makefile.in b/lib/Makefile.in
index 56d0e14460534799dd48dfb6fe54df100787571a..4bb886c0cdb12088e3698205bb695e45d35b69e8 100644 (file)
--- a/lib/Makefile.in
+++ b/lib/Makefile.in
@@ -66,7 +66,7 @@ am__vpath_adj = case $$p in \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = $(DESTDIR)$(pkgvdatadir) $(DESTDIR)$(scriptdir)
+am__installdirs = "$(DESTDIR)$(pkgvdatadir)" "$(DESTDIR)$(scriptdir)"
 dist_pkgvdataDATA_INSTALL = $(INSTALL_DATA)
 dist_scriptDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_pkgvdata_DATA) $(dist_script_DATA)
@@ -183,37 +183,37 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 uninstall-info-am:
 install-dist_pkgvdataDATA: $(dist_pkgvdata_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(pkgvdatadir)
+       test -z "$(pkgvdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgvdatadir)"
        @list='$(dist_pkgvdata_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(dist_pkgvdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgvdatadir)/$$f"; \
-         $(dist_pkgvdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgvdatadir)/$$f; \
+         echo " $(dist_pkgvdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgvdatadir)/$$f'"; \
+         $(dist_pkgvdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgvdatadir)/$$f"; \
        done
 
 uninstall-dist_pkgvdataDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dist_pkgvdata_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(pkgvdatadir)/$$f"; \
-         rm -f $(DESTDIR)$(pkgvdatadir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(pkgvdatadir)/$$f'"; \
+         rm -f "$(DESTDIR)$(pkgvdatadir)/$$f"; \
        done
 install-dist_scriptDATA: $(dist_script_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(scriptdir)
+       test -z "$(scriptdir)" || $(mkdir_p) "$(DESTDIR)$(scriptdir)"
        @list='$(dist_script_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(dist_scriptDATA_INSTALL) $$d$$p $(DESTDIR)$(scriptdir)/$$f"; \
-         $(dist_scriptDATA_INSTALL) $$d$$p $(DESTDIR)$(scriptdir)/$$f; \
+         echo " $(dist_scriptDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptdir)/$$f'"; \
+         $(dist_scriptDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptdir)/$$f"; \
        done
 
 uninstall-dist_scriptDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dist_script_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(scriptdir)/$$f"; \
-         rm -f $(DESTDIR)$(scriptdir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(scriptdir)/$$f'"; \
+         rm -f "$(DESTDIR)$(scriptdir)/$$f"; \
        done
 
 # This directory's subdirectories are mostly independent; you can cd
@@ -377,7 +377,9 @@ check: check-recursive
 all-am: Makefile $(DATA)
 installdirs: installdirs-recursive
 installdirs-am:
-       $(mkdir_p) $(DESTDIR)$(pkgvdatadir) $(DESTDIR)$(scriptdir)
+       for dir in "$(DESTDIR)$(pkgvdatadir)" "$(DESTDIR)$(scriptdir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-recursive
 install-exec: install-exec-recursive
 install-data: install-data-recursive

diff --git a/lib/am/Makefile.in b/lib/am/Makefile.in
index 6d545df662054ecbcea112fa551a66fd3890b016..44948c4dac3c0ae6d03773bb2f015f501843452b 100644 (file)
--- a/lib/am/Makefile.in
+++ b/lib/am/Makefile.in
@@ -57,7 +57,7 @@ am__vpath_adj = case $$p in \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = $(DESTDIR)$(amdir)
+am__installdirs = "$(DESTDIR)$(amdir)"
 dist_amDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_am_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -202,20 +202,20 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 uninstall-info-am:
 install-dist_amDATA: $(dist_am_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(amdir)
+       test -z "$(amdir)" || $(mkdir_p) "$(DESTDIR)$(amdir)"
        @list='$(dist_am_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(dist_amDATA_INSTALL) $$d$$p $(DESTDIR)$(amdir)/$$f"; \
-         $(dist_amDATA_INSTALL) $$d$$p $(DESTDIR)$(amdir)/$$f; \
+         echo " $(dist_amDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(amdir)/$$f'"; \
+         $(dist_amDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(amdir)/$$f"; \
        done
 
 uninstall-dist_amDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dist_am_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(amdir)/$$f"; \
-         rm -f $(DESTDIR)$(amdir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(amdir)/$$f'"; \
+         rm -f "$(DESTDIR)$(amdir)/$$f"; \
        done
 tags: TAGS
 TAGS:
@@ -255,7 +255,9 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(DATA)
 installdirs:
-       $(mkdir_p) $(DESTDIR)$(amdir)
+       for dir in "$(DESTDIR)$(amdir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am

diff --git a/lib/am/data.am b/lib/am/data.am
index 2ff1e644c1973324fec1aff6f9eb30dc4f2cdf17..45a928c4b1d648ce0e5ea087afff1465705734c1 100644 (file)
--- a/lib/am/data.am
+++ b/lib/am/data.am
@@ -26,14 +26,14 @@ endif %?INSTALL%
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%%PRIMARY%_INSTALL = $(INSTALL_%ONE_PRIMARY%)
 ?!BASE?%DIR%%PRIMARY%_INSTALL = $(install_sh_DATA)
 ?EXEC?.PHONY install-exec-am: install-%DIR%%PRIMARY%
 ?!EXEC?.PHONY install-data-am: install-%DIR%%PRIMARY%
 install-%DIR%%PRIMARY%: $(%DIR%_%PRIMARY%)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ?!BASE?        @$(am__vpath_adj_setup) \
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
@@ -46,8 +46,8 @@ install-%DIR%%PRIMARY%: $(%DIR%_%PRIMARY%)
 ## new dir variable or use a nobase_ target for the latter case.
 ?BASE?   f=$(am__strip_dir) \
 ?!BASE?          $(am__vpath_adj) \
-         echo " $(%DIR%%PRIMARY%_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-         $(%DIR%%PRIMARY%_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+         echo " $(%DIR%%PRIMARY%_INSTALL) '$$d$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+         $(%DIR%%PRIMARY%_INSTALL) "$$d$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
        done
 endif %?INSTALL%
 
@@ -65,8 +65,8 @@ uninstall-%DIR%%PRIMARY%:
 ?BASE? @list='$(%DIR%_%PRIMARY%)'; for p in $$list; do \
 ?BASE?   f=$(am__strip_dir) \
 ?!BASE?          $(am__vpath_adj) \
-         echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$f"; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \
        done
 endif %?INSTALL%
 

diff --git a/lib/am/distdir.am b/lib/am/distdir.am
index 0671a4843f0e46f3ae7845f5803dbc073d4e2243..71ee7769292f3489a6f4553aa3106ec53136cb9f 100644 (file)
--- a/lib/am/distdir.am
+++ b/lib/am/distdir.am
@@ -1,5 +1,5 @@
 ## automake - create Makefile.in from Makefile.am
-## Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+## Copyright (C) 2001, 2002, 2003, 2004  Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -324,8 +324,8 @@ distcheck: dist
 ## Undo the write access.
        chmod a-w $(distdir)
 ## Compute the absolute path of `_inst'.  Strip any leading DOS drive
-## to allow DESTDIR installations.  Otherwise $(DESTDIR)$(prefix) would
-## expand to c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst.
+## to allow DESTDIR installations.  Otherwise "$(DESTDIR)$(prefix)" would
+## expand to "c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst".
        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 ## We will attemp a DESTDIR install in $dc_destdir.  We don't
 ## create this directory under $dc_install_base, because it would

diff --git a/lib/am/install.am b/lib/am/install.am
index d91421672d3e4a854daa580e7efdfcec25569c74..487ff28a74e41490b5ebe294a15aef0564e46425 100644 (file)
--- a/lib/am/install.am
+++ b/lib/am/install.am
@@ -1,5 +1,5 @@
 ## automake - create Makefile.in from Makefile.am
-## Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+## Copyright (C) 2001, 2002, 2003, 2004  Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -20,17 +20,26 @@
 ## installdirs -- Creating the installdirs.  ##
 ## ----------------------------------------- ##
 
+## The reason we loop over %am__installdirs% (instead of simply running
+## `$(mkdir_p) %am__installdirs%') is that directories variable such as
+## `"$(DESTDIR)$(mydir)"' can potentially expand to `""' if `$(mydir)'
+## is conditionally defined.  BTW, those directories are quoted in
+## order to support installation paths with spaces.
 
 if %?SUBDIRS%
 .PHONY: installdirs installdirs-am
 RECURSIVE_TARGETS += installdirs-recursive
 installdirs: installdirs-recursive
 installdirs-am:%installdirs-local%
-?am__installdirs?      $(mkdir_p) %am__installdirs%
+?am__installdirs?      for dir in %am__installdirs%; do \
+?am__installdirs?        test -z "$$dir" || $(mkdir_p) "$$dir"; \
+?am__installdirs?      done
 else !%?SUBDIRS%
 .PHONY: installdirs
 installdirs:%installdirs-local%
-?am__installdirs?      $(mkdir_p) %am__installdirs%
+?am__installdirs?      for dir in %am__installdirs%; do \
+?am__installdirs?        test -z "$$dir" || $(mkdir_p) "$$dir"; \
+?am__installdirs?      done
 endif !%?SUBDIRS%
 
 

diff --git a/lib/am/java.am b/lib/am/java.am
index 04b6ec89f3e0f3da876626edb141b631515aeb3d..723df3c23f430221ea5b70ff20a451a15ee48522 100644 (file)
--- a/lib/am/java.am
+++ b/lib/am/java.am
@@ -39,18 +39,18 @@ class%DIR%.stamp: $(%DIR%_JAVA)
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?EXEC?.PHONY install-exec-am: install-%DIR%JAVA
 ?!EXEC?.PHONY install-data-am: install-%DIR%JAVA
 install-%DIR%JAVA: class%DIR%.stamp
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ## A single .java file can be compiled into multiple .class files.  So
 ## we just install all the .class files that got built into this
 ## directory.  This is not optimal, but will have to do for now.
        for p in *.class; do \
-         echo " $(INSTALL_DATA) $$p $(DESTDIR)$(%NDIR%dir)/$$p"; \
-         $(INSTALL_DATA) $$p $(DESTDIR)$(%NDIR%dir)/$$p; \
+         echo " $(INSTALL_DATA) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+         $(INSTALL_DATA) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$p"; \
        done
 endif %?INSTALL%
 
@@ -64,8 +64,8 @@ if %?INSTALL%
 uninstall-%DIR%JAVA:
        @$(NORMAL_UNINSTALL)
        @for p in *.class; do \
-         echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$p"; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$p; \
+         echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$p"; \
        done
 endif %?INSTALL%
 

diff --git a/lib/am/libs.am b/lib/am/libs.am
index 9d61e0a5be2ff4e6aed7769f2f87f488687a99c5..a51b037ef2a7c1bd167128802de182a578198c35 100644 (file)
--- a/lib/am/libs.am
+++ b/lib/am/libs.am
@@ -37,14 +37,14 @@ endif %?FIRST%
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%LIBRARIES_INSTALL = $(INSTALL_DATA)
 ?!BASE?%DIR%LIBRARIES_INSTALL = $(install_sh_DATA)
 ?EXEC?.PHONY install-exec-am: install-%DIR%LIBRARIES
 ?!EXEC?.PHONY install-data-am: install-%DIR%LIBRARIES
 install-%DIR%LIBRARIES: $(%DIR%_LIBRARIES)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
        @list='$(%DIR%_LIBRARIES)'; for p in $$list; do \
@@ -54,8 +54,8 @@ install-%DIR%LIBRARIES: $(%DIR%_LIBRARIES)
 ## not '$(DESTDIR)$(%NDIR%dir)/python/foo.yo'.
 ?BASE?     f=$(am__strip_dir) \
 ?!BASE?            f=$$p; \
-           echo " $(%DIR%LIBRARIES_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-           $(%DIR%LIBRARIES_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+           echo " $(%DIR%LIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+           $(%DIR%LIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
          else :; fi; \
        done
 ## We do two loops here so that $(POST_INSTALL) can be empty.  If we
@@ -68,8 +68,8 @@ install-%DIR%LIBRARIES: $(%DIR%_LIBRARIES)
          if test -f $$p; then \
 ?BASE?     p=$(am__strip_dir) \
 ## Must ranlib after installing because mod time changes.
-           echo " $(RANLIB) $(DESTDIR)$(%NDIR%dir)/$$p"; \
-           $(RANLIB) $(DESTDIR)$(%NDIR%dir)/$$p; \
+           echo " $(RANLIB) '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+           $(RANLIB) "$(DESTDIR)$(%NDIR%dir)/$$p"; \
          else :; fi; \
        done
 endif %?INSTALL%
@@ -85,8 +85,8 @@ uninstall-%DIR%LIBRARIES:
        @$(NORMAL_UNINSTALL)
        @list='$(%DIR%_LIBRARIES)'; for p in $$list; do \
 ?BASE?   p=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$p"; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$p; \
+         echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$p"; \
        done
 endif %?INSTALL%
 

diff --git a/lib/am/lisp.am b/lib/am/lisp.am
index 492e2904ff27ae567a3d213829d756f68d80be66..392ae6ced6448528c7acc87aaf424c0c44741cfb 100644 (file)
--- a/lib/am/lisp.am
+++ b/lib/am/lisp.am
@@ -54,7 +54,7 @@ elc-stamp: $(am__ELFILES)
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%LISP_INSTALL = $(INSTALL_DATA)
 ?!BASE?%DIR%LISP_INSTALL = $(install_sh_DATA)
 ?EXEC?.PHONY install-exec-am: install-%DIR%LISP
@@ -63,7 +63,7 @@ install-%DIR%LISP: $(%DIR%_LISP) $(ELCFILES)
        @$(NORMAL_INSTALL)
 ## Do not install anything if EMACS was not found.
        @if test "$(EMACS)" != no; then \
-         $(mkdir_p) $(DESTDIR)$(%NDIR%dir); \
+         test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"; \
 ?!BASE?          $(am__vpath_adj_setup) \
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
@@ -72,12 +72,12 @@ install-%DIR%LISP: $(%DIR%_LISP) $(ELCFILES)
            if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 ?BASE?     f=$(am__strip_dir) \
 ?!BASE?            $(am__vpath_adj) \
-           echo " $(%DIR%LISP_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-           $(%DIR%LISP_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+           echo " $(%DIR%LISP_INSTALL) '$$d$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+           $(%DIR%LISP_INSTALL) "$$d$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
 ## Only install .elc file if it exists.
            if test -f $${p}c; then \
-             echo " $(%DIR%LISP_INSTALL) $${p}c $(DESTDIR)$(%NDIR%dir)/$${f}c"; \
-             $(%DIR%LISP_INSTALL) $${p}c $(DESTDIR)$(%NDIR%dir)/$${f}c; \
+             echo " $(%DIR%LISP_INSTALL) '$${p}c' '$(DESTDIR)$(%NDIR%dir)/$${f}c'"; \
+             $(%DIR%LISP_INSTALL) "$${p}c" "$(DESTDIR)$(%NDIR%dir)/$${f}c"; \
            else : ; fi; \
          done; \
        else : ; fi
@@ -98,8 +98,8 @@ uninstall-%DIR%LISP:
          list='$(%DIR%_LISP)'; for p in $$list; do \
 ?BASE?     f=$(am__strip_dir) \
 ?!BASE?            $(am__vpath_adj) \
-           echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$f $(DESTDIR)$(%NDIR%dir)/$${f}c"; \
-           rm -f $(DESTDIR)$(%NDIR%dir)/$$f $(DESTDIR)$(%NDIR%dir)/$${f}c; \
+           echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$f' '$(DESTDIR)$(%NDIR%dir)/$${f}c'"; \
+           rm -f "$(DESTDIR)$(%NDIR%dir)/$$f" "$(DESTDIR)$(%NDIR%dir)/$${f}c"; \
          done; \
        else : ; fi
 endif %?INSTALL%

diff --git a/lib/am/ltlib.am b/lib/am/ltlib.am
index 2dd4ce6a2d5bb28ccf6e39738b1ed92dcb9dc6cf..0f6cc490ce2d50694e3821fa2f6f840684b61039 100644 (file)
--- a/lib/am/ltlib.am
+++ b/lib/am/ltlib.am
@@ -26,14 +26,14 @@ endif %?INSTALL%
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%LTLIBRARIES_INSTALL = $(INSTALL)
 ?!BASE?%DIR%LTLIBRARIES_INSTALL = $(install_sh) -c
 ?EXEC?.PHONY install-exec-am: install-%DIR%LTLIBRARIES
 ?!EXEC?.PHONY install-data-am: install-%DIR%LTLIBRARIES
 install-%DIR%LTLIBRARIES: $(%DIR%_LTLIBRARIES)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
        @list='$(%DIR%_LTLIBRARIES)'; for p in $$list; do \
@@ -47,10 +47,10 @@ install-%DIR%LTLIBRARIES: $(%DIR%_LTLIBRARIES)
 ## if the program doesn't have a name that libtool expects.
 ## Use INSTALL and not INSTALL_DATA because libtool knows the right
 ## permissions to use.
-?LIBTOOL?          echo " $(LIBTOOL) --mode=install $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-?LIBTOOL?          $(LIBTOOL) --mode=install $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(%NDIR%dir)/$$f; \
-?!LIBTOOL?         echo " $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-?!LIBTOOL?         $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+?LIBTOOL?          echo " $(LIBTOOL) --mode=install $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+?LIBTOOL?          $(LIBTOOL) --mode=install $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
+?!LIBTOOL?         echo " $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+?!LIBTOOL?         $(%DIR%LTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
          else :; fi; \
        done
 endif %?INSTALL%
@@ -66,10 +66,10 @@ uninstall-%DIR%LTLIBRARIES:
        @$(NORMAL_UNINSTALL)
        @set -x; list='$(%DIR%_LTLIBRARIES)'; for p in $$list; do \
 ?BASE?   p=$(am__strip_dir) \
-?LIBTOOL?        echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(%NDIR%dir)/$$p"; \
-?LIBTOOL?        $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(%NDIR%dir)/$$p; \
-?!LIBTOOL?       echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$p"; \
-?!LIBTOOL?       rm -f $(DESTDIR)$(%NDIR%dir)/$$p; \
+?LIBTOOL?        echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+?LIBTOOL?        $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(%NDIR%dir)/$$p"; \
+?!LIBTOOL?       echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$p'"; \
+?!LIBTOOL?       rm -f "$(DESTDIR)$(%NDIR%dir)/$$p"; \
        done
 endif %?INSTALL%
 

diff --git a/lib/am/mans.am b/lib/am/mans.am
index b0ab625b1d7355802fe9cc8b28eb6b6f6f0d920d..08db24e0adea90e847f3cef9841d0d8544c13bf8 100644 (file)
--- a/lib/am/mans.am
+++ b/lib/am/mans.am
@@ -1,5 +1,5 @@
 ## automake - create Makefile.in from Makefile.am
-## Copyright (C) 1998, 2001, 2003 Free Software Foundation, Inc.
+## Copyright (C) 1998, 2001, 2003, 2004 Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
 ## it under the terms of the GNU General Public License as published by
@@ -27,11 +27,11 @@ man%SECTION%dir = $(mandir)/man%SECTION%
 
 .PHONY: install-man
 ?INSTALL-MAN?install-data-am: install-man
-?INSTALL-MAN?am__installdirs += $(DESTDIR)$(man%SECTION%dir)
+?INSTALL-MAN?am__installdirs += "$(DESTDIR)$(man%SECTION%dir)"
 .PHONY install-man: install-man%SECTION%
 install-man%SECTION%: $(man%SECTION%_MANS) $(man_MANS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(man%SECTION%dir)
+       test -z "$(man%SECTION%dir)" || $(mkdir_p) "$(DESTDIR)$(man%SECTION%dir)"
        @list='$(man%SECTION%_MANS) $(dist_man%SECTION%_MANS) $(nodist_man%SECTION%_MANS)'; \
 ## Extract all items from man_MANS that should go in this section.
 ## This must be done dynamically to support conditionals.
@@ -57,8 +57,8 @@ install-man%SECTION%: $(man%SECTION%_MANS) $(man_MANS)
          inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
          inst=`echo $$inst | sed -e 's/^.*\///'`; \
          inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man%SECTION%dir)/$$inst"; \
-         $(INSTALL_DATA) $$file $(DESTDIR)$(man%SECTION%dir)/$$inst; \
+         echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man%SECTION%dir)/$$inst'"; \
+         $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man%SECTION%dir)/$$inst"; \
        done
 
 
@@ -94,6 +94,6 @@ uninstall-man%SECTION%:
          inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
          inst=`echo $$inst | sed -e 's/^.*\///'`; \
          inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-         echo " rm -f $(DESTDIR)$(man%SECTION%dir)/$$inst"; \
-         rm -f $(DESTDIR)$(man%SECTION%dir)/$$inst; \
+         echo " rm -f '$(DESTDIR)$(man%SECTION%dir)/$$inst'"; \
+         rm -f "$(DESTDIR)$(man%SECTION%dir)/$$inst"; \
        done

diff --git a/lib/am/progs.am b/lib/am/progs.am
index 50cbd1b6c6356526ce065e7d984d0c52911f8b75..dc3c9b02e112eaa8afa57806ce5b4b3b8988de14 100644 (file)
--- a/lib/am/progs.am
+++ b/lib/am/progs.am
@@ -1,5 +1,5 @@
 ## automake - create Makefile.in from Makefile.am
-## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2003
+## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2003, 2004
 ##  Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
@@ -23,14 +23,14 @@
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%PROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 ?!BASE?%DIR%PROGRAMS_INSTALL = $(install_sh_PROGRAM)
 ?EXEC?.PHONY install-exec-am: install-%DIR%PROGRAMS
 ?!EXEC?.PHONY install-data-am: install-%DIR%PROGRAMS
 install-%DIR%PROGRAMS: $(%DIR%_PROGRAMS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
        @list='$(%DIR%_PROGRAMS)'; for p in $$list; do \
@@ -51,10 +51,10 @@ install-%DIR%PROGRAMS: $(%DIR%_PROGRAMS)
 ## Note that we explicitly set the libtool mode.  This avoids any
 ## lossage if the install program doesn't have a name that libtool
 ## expects.
-?LIBTOOL?         echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(%DIR%PROGRAMS_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-?LIBTOOL?         $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(%DIR%PROGRAMS_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f || exit 1; \
-?!LIBTOOL?        echo " $(INSTALL_PROGRAM_ENV) $(%DIR%PROGRAMS_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-?!LIBTOOL?        $(INSTALL_PROGRAM_ENV) $(%DIR%PROGRAMS_INSTALL) $$p $(DESTDIR)$(%NDIR%dir)/$$f || exit 1; \
+?LIBTOOL?         echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(%DIR%PROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+?LIBTOOL?         $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(%DIR%PROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f" || exit 1; \
+?!LIBTOOL?        echo " $(INSTALL_PROGRAM_ENV) $(%DIR%PROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+?!LIBTOOL?        $(INSTALL_PROGRAM_ENV) $(%DIR%PROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(%NDIR%dir)/$$f" || exit 1; \
          else :; fi; \
        done
 endif %?INSTALL%
@@ -73,8 +73,8 @@ uninstall-%DIR%PROGRAMS:
          f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
 ## Prepend the directory part if nobase_ is used.
 ?!BASE?          f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
-         echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$f"; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \
        done
 endif %?INSTALL%
 
@@ -120,7 +120,7 @@ installcheck-%DIR%PROGRAMS: $(%DIR%_PROGRAMS)
 ## Insert the directory back if nobase_ is used.
 ?!BASE?          f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
          for opt in --help --version; do \
-           if $(DESTDIR)$(%NDIR%dir)/$$f $$opt > c$${pid}_.out 2> c$${pid}_.err \
+           if "$(DESTDIR)$(%NDIR%dir)/$$f" $$opt > c$${pid}_.out 2> c$${pid}_.err \
                 && test -n "`cat c$${pid}_.out`" \
                 && test -z "`cat c$${pid}_.err`"; then :; \
            else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \

diff --git a/lib/am/python.am b/lib/am/python.am
index 9af7f7e165d56b81c93b558324aa14c4c1c6f8ce..6a7ae4cab8bf3f658adcbfb306290da2b0f88acb 100644 (file)
--- a/lib/am/python.am
+++ b/lib/am/python.am
@@ -25,14 +25,14 @@ endif %?INSTALL%
 ## ------------ ##
 
 if %?INSTALL%
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%PYTHON_INSTALL = $(INSTALL_DATA)
 ?!BASE?%DIR%PYTHON_INSTALL = $(install_sh_DATA)
 ?EXEC?.PHONY install-exec-am: install-%DIR%PYTHON
 ?!EXEC?.PHONY install-data-am: install-%DIR%PYTHON
 install-%DIR%PYTHON: $(%DIR%_PYTHON)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ?!BASE?        @$(am__vpath_adj_setup) \
 ?!BASE?        list='$(%DIR%_PYTHON)'; dlist=''; for p in $$list; do\
 ?BASE? @list='$(%DIR%_PYTHON)'; dlist=''; for p in $$list; do\
@@ -46,14 +46,14 @@ install-%DIR%PYTHON: $(%DIR%_PYTHON)
 ?!BASE?            $(am__vpath_adj) \
            dlist="$$dlist $$f"; \
 ## Don't perform translation, since script name is important.
-           echo " $(%DIR%PYTHON_INSTALL) $$b$$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-           $(%DIR%PYTHON_INSTALL) $$b$$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+           echo " $(%DIR%PYTHON_INSTALL) '$$b$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+           $(%DIR%PYTHON_INSTALL) "$$b$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
          else :; fi; \
        done; \
 ## Byte-compile must be done at install time, since file times are
 ## encoded in the actual files.
        test -z "$$dlist" || \
-       PYTHON=$(PYTHON) $(py_compile) --basedir $(DESTDIR)$(%NDIR%dir) $$dlist
+       PYTHON=$(PYTHON) $(py_compile) --basedir "$(DESTDIR)$(%NDIR%dir)" $$dlist
 endif %?INSTALL%
 
 
@@ -70,11 +70,11 @@ uninstall-%DIR%PYTHON:
 ?BASE? @list='$(%DIR%_PYTHON)'; dlist=''; for p in $$list; do\
 ?BASE?   f=$(am__strip_dir) \
 ?!BASE?          $(am__vpath_adj) \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$f; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \
 ## This is to remove the .pyc and .pyo byte compiled versions (a bit
 ## of a hack).
-         rm -f $(DESTDIR)$(%NDIR%dir)/$${d}c; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$${d}o; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$${f}c"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$${f}o"; \
        done
 endif %?INSTALL%
 

diff --git a/lib/am/scripts.am b/lib/am/scripts.am
index 74e327b1fbd12fbddc3a631c56654ae1f2c27895..374f990df41f45a5e3a9bde885f4fa58c8e9d004 100644 (file)
--- a/lib/am/scripts.am
+++ b/lib/am/scripts.am
@@ -29,14 +29,14 @@ endif %?INSTALL%
 
 if %?INSTALL%
 ## if doesn't work properly for Automake variables yet.
-am__installdirs += $(DESTDIR)$(%NDIR%dir)
+am__installdirs += "$(DESTDIR)$(%NDIR%dir)"
 ?BASE?%DIR%SCRIPT_INSTALL = $(INSTALL_SCRIPT)
 ?!BASE?%DIR%SCRIPT_INSTALL = $(install_sh_SCRIPT)
 ?EXEC?.PHONY install-exec-am: install-%DIR%SCRIPTS
 ?!EXEC?.PHONY install-data-am: install-%DIR%SCRIPTS
 install-%DIR%SCRIPTS: $(%DIR%_SCRIPTS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(%NDIR%dir)
+       test -z "$(%NDIR%dir)" || $(mkdir_p) "$(DESTDIR)$(%NDIR%dir)"
 ?!BASE?        @$(am__vpath_adj_setup) \
 ## Funny invocation because Makefile variable can be empty, leading to
 ## a syntax error in sh.
@@ -54,8 +54,8 @@ install-%DIR%SCRIPTS: $(%DIR%_SCRIPTS)
            f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
 ## Prepend the directory part if nobase_ is used.
 ?!BASE?            f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
-           echo " $(%DIR%SCRIPT_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f"; \
-           $(%DIR%SCRIPT_INSTALL) $$d$$p $(DESTDIR)$(%NDIR%dir)/$$f; \
+           echo " $(%DIR%SCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+           $(%DIR%SCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(%NDIR%dir)/$$f"; \
          else :; fi; \
        done
 endif %?INSTALL%
@@ -77,8 +77,8 @@ uninstall-%DIR%SCRIPTS:
          f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
 ## Prepend the directory part if nobase_ is used.
 ?!BASE?          f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
-         echo " rm -f $(DESTDIR)$(%NDIR%dir)/$$f"; \
-         rm -f $(DESTDIR)$(%NDIR%dir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$f'"; \
+         rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \
        done
 endif %?INSTALL%
 
@@ -110,7 +110,7 @@ installcheck-%DIR%SCRIPTS: $(%DIR%_SCRIPTS)
 ## Insert the directory back if nobase_ is used.
 ?!BASE?          f=`echo "$$p" | sed 's|[^/]*$$||'`"$$f"; \
          for opt in --help --version; do \
-           if $(DESTDIR)$(%NDIR%dir)/$$f $$opt > c$${pid}_.out 2> c$${pid}_.err \
+           if "$(DESTDIR)$(%NDIR%dir)/$$f" $$opt > c$${pid}_.out 2> c$${pid}_.err \
                 && test -n "`cat c$${pid}_.out`" \
                 && test -z "`cat c$${pid}_.err`"; then :; \
            else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \

diff --git a/lib/am/texinfos.am b/lib/am/texinfos.am
index bc02a66e0ef849eb35f1f3a49dae5aea93231561..916949f96e88dd962e9d4f71845a805e70e2e145 100644 (file)
--- a/lib/am/texinfos.am
+++ b/lib/am/texinfos.am
@@ -1,6 +1,6 @@
 ## automake - create Makefile.in from Makefile.am
 
-## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+## Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
 ## Free Software Foundation, Inc.
 
 ## This program is free software; you can redistribute it and/or modify
@@ -107,7 +107,7 @@ endif ! %?LOCAL-TEXIS%
 ## is hard coded.
 if %?INSTALL-INFO%
 if %?LOCAL-TEXIS%
-am__installdirs += $(DESTDIR)$(infodir)
+am__installdirs += "$(DESTDIR)$(infodir)"
 install-data-am: install-info-am
 endif %?LOCAL-TEXIS%
 endif %?INSTALL-INFO%
@@ -123,7 +123,7 @@ endif !%?SUBDIRS%
 if %?LOCAL-TEXIS%
 install-info-am: $(INFO_DEPS)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(infodir)
+       test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
        list='$(INFO_DEPS)'; \
        for file in $$list; do \
@@ -147,8 +147,8 @@ install-info-am: $(INFO_DEPS)
            if test -f $$ifile; then \
 ## Strip directory
              relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
-             echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
-             $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+             echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
+             $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
            else : ; fi; \
          done; \
        done
@@ -174,10 +174,10 @@ install-info-am: $(INFO_DEPS)
 ## instance if you don't have a dir file, install-info will fail.  I
 ## think instead it should create a new dir file for you.  This bug
 ## causes the `make distcheck' target to fail reliably.
-           echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\
+           echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 ## Use `|| :' here because Sun make passes -e to sh; if install-info
 ## fails then we'd fail if we used `;'.
-           install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\
+           install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
          done; \
        else : ; fi
 else ! %?LOCAL-TEXIS%
@@ -207,8 +207,8 @@ uninstall-info-am:
            relfile=`echo "$$file" | sed 's|^.*/||'`; \
 ## install-info needs the actual info file.  We use the installed one,
 ## rather than relying on one still being in srcdir or builddir.
-           echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
-           install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
+           echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+           install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
          done; \
        else :; fi
        @$(NORMAL_UNINSTALL)
@@ -217,7 +217,7 @@ uninstall-info-am:
          relfile=`echo "$$file" | sed 's|^.*/||'`; \
 ## DJGPP-style info files.  See comment in install-info-am.
          relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
-         (if cd $(DESTDIR)$(infodir); then \
+         (if cd "$(DESTDIR)$(infodir)"; then \
             echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
             rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
           else :; fi); \

diff --git a/m4/Makefile.in b/m4/Makefile.in
index cd3dfaac5a4b7f64a80d3afbc09e1687056c3939..8eefad682cb2b86eafc6266437a0bff2e061aacf 100644 (file)
--- a/m4/Makefile.in
+++ b/m4/Makefile.in
@@ -57,7 +57,7 @@ am__vpath_adj = case $$p in \
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = $(DESTDIR)$(m4datadir)
+am__installdirs = "$(DESTDIR)$(m4datadir)"
 dist_m4dataDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_m4data_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -195,20 +195,20 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 uninstall-info-am:
 install-dist_m4dataDATA: $(dist_m4data_DATA)
        @$(NORMAL_INSTALL)
-       $(mkdir_p) $(DESTDIR)$(m4datadir)
+       test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)"
        @list='$(dist_m4data_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f=$(am__strip_dir) \
-         echo " $(dist_m4dataDATA_INSTALL) $$d$$p $(DESTDIR)$(m4datadir)/$$f"; \
-         $(dist_m4dataDATA_INSTALL) $$d$$p $(DESTDIR)$(m4datadir)/$$f; \
+         echo " $(dist_m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
+         $(dist_m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
        done
 
 uninstall-dist_m4dataDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dist_m4data_DATA)'; for p in $$list; do \
          f=$(am__strip_dir) \
-         echo " rm -f $(DESTDIR)$(m4datadir)/$$f"; \
-         rm -f $(DESTDIR)$(m4datadir)/$$f; \
+         echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
+         rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
        done
 tags: TAGS
 TAGS:
@@ -249,7 +249,9 @@ check-am: all-am
 check: check-am
 all-am: Makefile $(DATA)
 installdirs:
-       $(mkdir_p) $(DESTDIR)$(m4datadir)
+       for dir in "$(DESTDIR)$(m4datadir)"; do \
+         test -z "$$dir" || $(mkdir_p) "$$dir"; \
+       done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am

diff --git a/tests/Makefile.am b/tests/Makefile.am
index 683d8395b306c1f8d757a0b0378967acebb5c703..572dedb5dcf98ef3087c65e01fb3cd3e0adb605e 100644 (file)
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -246,6 +246,7 @@ instexec.test \
 insthook.test \
 instman.test \
 instman2.test \
+instspc.test \
 interp.test \
 interp2.test \
 java.test \

diff --git a/tests/Makefile.in b/tests/Makefile.in
index c76aaaa5dbf8babfad491ebe8c0270c8f020dde2..7bf4df89f5f387ad160c51f2ea45623c04343252 100644 (file)
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -360,6 +360,7 @@ instexec.test \
 insthook.test \
 instman.test \
 instman2.test \
+instspc.test \
 interp.test \
 interp2.test \
 java.test \

diff --git a/tests/instspc.test b/tests/instspc.test
new file mode 100755 (executable)
index 0000000..04e3d07
--- /dev/null
+++ b/tests/instspc.test
@@ -0,0 +1,113 @@
+#! /bin/sh
+# Copyright (C) 2004  Free Software Foundation, Inc.
+#
+# This file is part of GNU Automake.
+#
+# GNU Automake is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Automake is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Automake; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# Check that installation to directory with spaces succeed.
+# Report from James Amundson.
+
+# This is mostly the same input as nobase.test, but we do not use
+# libtool libraries, because Libtool does not preserve space in
+# filenames (Issue observed with ltmain.sh (GNU libtool) 1.5a (1.1323
+# 2003/11/10 21:06:47))
+
+
+required='gcc'
+. ./defs || exit 1
+
+set -e
+
+# Make sure this system supports spaces in filenames.
+mkdir 'a b' || exit 77
+
+cat >> configure.in <<'EOF'
+AC_PROG_CC
+AC_PROG_RANLIB
+AC_OUTPUT
+EOF
+
+cat > Makefile.am << 'EOF'
+foodir = $(prefix)/foo
+fooexecdir = $(prefix)/foo
+
+foo_HEADERS = sub/base.h
+nobase_foo_HEADERS = sub/nobase.h
+
+dist_foo_DATA = sub/base.dat
+nobase_dist_foo_DATA = sub/nobase.dat
+
+dist_fooexec_SCRIPTS = sub/base.sh
+nobase_dist_fooexec_SCRIPTS = sub/nobase.sh
+
+fooexec_PROGRAMS = sub/base
+nobase_fooexec_PROGRAMS = sub/nobase
+sub_base_SOURCES = source.c
+sub_nobase_SOURCES = source.c
+
+fooexec_LIBRARIES = sub/libbase.a
+nobase_fooexec_LIBRARIES = sub/libnobase.a
+sub_libbase_a_SOURCES = source.c
+sub_libnobase_a_SOURCES = source.c
+
+test-install-space: install
+       test   -f "$(DESTDIR)/more space/foo/sub/nobase.h"
+       test ! -f "$(DESTDIR)/more space/foo/nobase.h"
+       test   -f "$(DESTDIR)/more space/foo/base.h"
+       test   -f "$(DESTDIR)/more space/foo/sub/nobase.dat"
+       test ! -f "$(DESTDIR)/more space/foo/nobase.dat"
+       test   -f "$(DESTDIR)/more space/foo/base.dat"
+       test   -f "$(DESTDIR)/more space/foo/sub/nobase.sh"
+       test ! -f "$(DESTDIR)/more space/foo/nobase.sh"
+       test   -f "$(DESTDIR)/more space/foo/base.sh"
+       test   -f "$(DESTDIR)/more space/foo/sub/nobase$(EXEEXT)"
+       test ! -f "$(DESTDIR)/more space/foo/nobase$(EXEEXT)"
+       test   -f "$(DESTDIR)/more space/foo/base$(EXEEXT)"
+       test   -f "$(DESTDIR)/more space/foo/sub/libnobase.a"
+       test ! -f "$(DESTDIR)/more space/foo/libnobase.a"
+       test   -f "$(DESTDIR)/more space/foo/libbase.a"
+EOF
+
+mkdir sub
+
+: > sub/base.h
+: > sub/nobase.h
+: > sub/base.dat
+: > sub/nobase.dat
+: > sub/base.sh
+: > sub/nobase.sh
+
+cat >source.c <<'EOF'
+int
+main (int argc, char *argv[])
+{
+  return 0;
+}
+EOF
+cp source.c source2.c
+
+$ACLOCAL
+$AUTOCONF
+$AUTOMAKE -a
+
+mkdir build
+cd build
+
+../configure --prefix '/more space'
+$MAKE
+dest=`pwd`/'with space';
+DESTDIR="$dest" $MAKE -e test-install-space