bug reports to the maintainers.
The GNU C library is very complex. The installation process has not been
-completely automated; there are too many variables. You can do substantial
+completely automated; there are too many variables. You can do substantial
damage to your system by installing the library incorrectly. Make sure you
understand what you are undertaking before you begin.
If you have any questions you think should be answered in this document,
please let me know.
- --drepper@cygnus.com
+ --drepper@redhat.com
\f
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
1.2. What compiler do I need to build GNU libc?
1.3. When I try to compile glibc I get only error messages.
What's wrong?
-1.4. Do I need a special linker or archiver?
+1.4. Do I need a special linker or assembler?
1.5. Which compiler should I use for powerpc?
-1.6. Do I need some more things to compile GNU C Library?
-1.7. What version of the Linux kernel headers should be used?
-1.8. The compiler hangs while building iconvdata modules. What's
+1.6. Which tools should I use for ARM?
+1.7. Do I need some more things to compile the GNU C Library?
+1.8. What version of the Linux kernel headers should be used?
+1.9. The compiler hangs while building iconvdata modules. What's
wrong?
-1.9. When I run `nm -u libc.so' on the produced library I still
+1.10. When I run `nm -u libc.so' on the produced library I still
find unresolved symbols. Can this be ok?
-1.10. What are these `add-ons'?
-1.11. My XXX kernel emulates a floating-point coprocessor for me.
+1.11. What are these `add-ons'?
+1.12. My XXX kernel emulates a floating-point coprocessor for me.
Should I enable --with-fp?
-1.12. When compiling GNU libc I get lots of errors saying functions
+1.13. When compiling GNU libc I get lots of errors saying functions
in glibc are duplicated in libgcc.
-1.13. Why do I get messages about missing thread functions when I use
+1.14. Why do I get messages about missing thread functions when I use
librt? I don't even use threads.
-1.14. What's the problem with configure --enable-omitfp?
+1.15. What's the problem with configure --enable-omitfp?
+1.16. I get failures during `make check'. What should I do?
+1.17. What is symbol versioning good for? Do I need it?
+1.18. How can I compile on my fast ix86 machine a working libc for my slow
+ i386? After installing libc, programs abort with "Illegal
+ Instruction".
+1.19. `make' complains about a missing dlfcn/libdl.so when building
+ malloc/libmemprof.so. How can I fix this?
+1.20. Which tools should I use for MIPS?
+1.21. Which compiler should I use for powerpc64?
2. Installation and configuration issues
functions `stat', `lstat', `fstat', and `mknod' and while
linking on my Linux system I get error messages. How is
this supposed to work?
-2.8. How can I compile gcc 2.7.2.1 from the gcc source code using
+2.8. When I run an executable on one system which I compiled on
+ another, I get dynamic linker errors. Both systems have the same
+ version of glibc installed. What's wrong?
+2.9. How can I compile gcc 2.7.2.1 from the gcc source code using
glibc 2.x?
-2.9. The `gencat' utility cannot process the catalog sources which
+2.10. The `gencat' utility cannot process the catalog sources which
were used on my Linux libc5 based system. Why?
-2.10. Programs using libc have their messages translated, but other
+2.11. Programs using libc have their messages translated, but other
behavior is not localized (e.g. collating order); why?
-2.11. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
+2.12. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
works great. But the glibc NIS+ doesn't seem to work.
-2.12. I have killed ypbind to stop using NIS, but glibc
+2.13. I have killed ypbind to stop using NIS, but glibc
continues using NIS.
-2.13. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
+2.14. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
RPC: Unable to receive; errno = Connection refused" when using NIS.
-2.14. After installing glibc name resolving doesn't work properly.
-2.15. How do I create the databases for NSS?
-2.16. I have /usr/include/net and /usr/include/scsi as symlinks
+2.15. After installing glibc name resolving doesn't work properly.
+2.16. How do I create the databases for NSS?
+2.17. I have /usr/include/net and /usr/include/scsi as symlinks
into my Linux source tree. Is that wrong?
-2.17. Programs like `logname', `top', `uptime' `users', `w' and
+2.18. Programs like `logname', `top', `uptime' `users', `w' and
`who', show incorrect information about the (number of)
users on my system. Why?
-2.18. After upgrading to glibc 2.1 with symbol versioning I get
+2.19. After upgrading to glibc 2.1 with symbol versioning I get
errors about undefined symbols. What went wrong?
-2.19. When I start the program XXX after upgrading the library
+2.20. When I start the program XXX after upgrading the library
I get
XXX: Symbol `_sys_errlist' has different size in shared
object, consider re-linking
Why? What should I do?
-2.20. What do I need for C++ development?
-2.21. Even statically linked programs need some shared libraries
+2.21. What do I need for C++ development?
+2.22. Even statically linked programs need some shared libraries
which is not acceptable for me. What can I do?
+2.23. I just upgraded my Linux system to glibc and now I get
+ errors whenever I try to link any program.
+2.24. When I use nscd the machine freezes.
+2.25. I need lots of open files. What do I have to do?
+2.26. How do I get the same behavior on parsing /etc/passwd and
+ /etc/group as I have with libc5 ?
+2.27. What needs to be recompiled when upgrading from glibc 2.0 to glibc
+ 2.1?
+2.28. Why is extracting files via tar so slow?
+2.29. Compiling programs I get parse errors in libio.h (e.g. "parse error
+ before `_IO_seekoff'"). How should I fix this?
+2.30. After upgrading to glibc 2.1, libraries that were compiled against
+ glibc 2.0.x don't work anymore.
+2.31. What happened to the Berkeley DB libraries? Can I still use db
+ in /etc/nsswitch.conf?
+2.32. What has do be done when upgrading to glibc 2.2?
+2.33. The makefiles want to do a CVS commit.
+2.34. When compiling C++ programs, I get a compilation error in streambuf.h.
+2.35. When recompiling GCC, I get compilation errors in libio.
+2.36. Why shall glibc never get installed on GNU/Linux systems in
+/usr/local?
+2.37. When recompiling GCC, I get compilation errors in libstdc++.
3. Source and binary incompatibilities, and what to do about them
3.11. I get some errors with `gcc -ansi'. Isn't glibc ANSI compatible?
3.12. I can't access some functions anymore. nm shows that they do
exist but linking fails nevertheless.
+3.13. When using the db-2 library which comes with glibc is used in
+ the Perl db modules the testsuite is not passed. This did not
+ happen with db-1, gdbm, or ndbm.
+3.14. The pow() inline function I get when including <math.h> is broken.
+ I get segmentation faults when I run the program.
+3.15. The sys/sem.h file lacks the definition of `union semun'.
+3.16. Why has <netinet/ip_fw.h> disappeared?
+3.17. I get floods of warnings when I use -Wconversion and include
+ <string.h> or <math.h>.
+3.18. After upgrading to glibc 2.1, I receive errors about
+ unresolved symbols, like `_dl_initial_searchlist' and can not
+ execute any binaries. What went wrong?
+3.19. bonnie reports that char i/o with glibc 2 is much slower than with
+ libc5. What can be done?
+3.20. Programs compiled with glibc 2.1 can't read db files made with glibc
+ 2.0. What has changed that programs like rpm break?
+3.21. Autoconf's AC_CHECK_FUNC macro reports that a function exists, but
+ when I try to use it, it always returns -1 and sets errno to ENOSYS.
+3.22. My program segfaults when I call fclose() on the FILE* returned
+ from setmntent(). Is this a glibc bug?
+3.23. I get "undefined reference to `atexit'"
4. Miscellaneous
4.3. When I set the timezone by setting the TZ environment variable
to EST5EDT things go wrong since glibc computes the wrong time
from this information.
+4.4. What other sources of documentation about glibc are available?
+4.5. The timezone string for Sydney/Australia is wrong since even when
+ daylight saving time is in effect the timezone string is EST.
+4.6. I've build make 3.77 against glibc 2.1 and now make gets
+ segmentation faults.
+4.7. Why do so many programs using math functions fail on my AlphaStation?
+4.8. The conversion table for character set XX does not match with
+what I expect.
+4.9. How can I find out which version of glibc I am using in the moment?
+4.10. Context switching with setcontext() does not work from within
+ signal handlers.
\f
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
*-*-gnu GNU Hurd
i[3456]86-*-linux-gnu Linux-2.x on Intel
m68k-*-linux-gnu Linux-2.x on Motorola 680x0
- alpha-*-linux-gnu Linux-2.x on DEC Alpha
+ alpha*-*-linux-gnu Linux-2.x on DEC Alpha
powerpc-*-linux-gnu Linux and MkLinux on PowerPC systems
+ powerpc64-*-linux-gnu Linux-2.4+ on 64-bit PowerPC systems
sparc-*-linux-gnu Linux-2.x on SPARC
sparc64-*-linux-gnu Linux-2.x on UltraSPARC
arm-*-none ARM standalone systems
+ arm-*-linux Linux-2.x on ARM
arm-*-linuxaout Linux-2.x on ARM using a.out binaries
+ mips*-*-linux-gnu Linux-2.x on MIPS
+ ia64-*-linux-gnu Linux-2.x on ia64
+ s390-*-linux-gnu Linux-2.x on IBM S/390
+ s390x-*-linux-gnu Linux-2.x on IBM S/390 64-bit
+ cris-*-linux-gnu Linux-2.4+ on CRIS
Ports to other Linux platforms are in development, and may in fact work
already, but no one has sent us success reports for them. Currently no
and the many mirror sites. ftp.gnu.org is always overloaded, so try to find
a local mirror first.
-You always should try to use the latest official release. Older versions
+You should always try to use the latest official release. Older versions
may not have all the features GNU libc requires. The current releases of
-egcs (1.0.2) and GNU CC (2.8.1) should work with the GNU C library (for
-powerpc see question question 1.5).
+gcc (3.2 or newer) should work with the GNU C library (for MIPS see question 1.20).
+
+Please note that gcc 2.95 and 2.95.x cannot compile glibc on Alpha due to
+problems in the complex float support.
1.3. When I try to compile glibc I get only error messages.
What's wrong?
-{UD} You definitely need GNU make to translate GNU libc. No other make
+{UD} You definitely need GNU make to build GNU libc. No other make
program has the needed functionality.
-We recommend version GNU make version 3.75. Versions 3.76 and 3.76.1 have
-bugs which appear when building big projects like GNU libc. Versions before
-3.74 have bugs and/or are missing features.
-
+We recommend version GNU make version 3.79 or newer. Older versions have
+bugs and/or are missing features.
-1.4. Do I need a special linker or archiver?
-{UD} You may be able to use your system linker, but GNU libc works best with
-GNU binutils.
+1.4. Do I need a special linker or assembler?
-On systems where the native linker does not support weak symbols you will
-not get a fully ISO C compliant C library. Generally speaking you should
-use the GNU binutils if they provide at least the same functionality as your
-system's tools.
+{ZW} If you want a shared library, you need a linker and assembler that
+understand all the features of ELF, including weak and versioned symbols.
+The static library can be compiled with less featureful tools, but lacks key
+features such as NSS.
-Always get the newest release of GNU binutils available. Older releases are
-known to have bugs that prevent a successful compilation.
+For Linux or Hurd, you want binutils 2.13 or higher. These are the only
+versions we've tested and found reliable. Other versions may work but we
+don't recommend them, especially not when C++ is involved.
-{ZW} As of release 2.1 a linker supporting symbol versions is required. For
-Linux, get binutils-2.8.1.0.23 or later. Other systems may have native
-linker support, but it's moot right now, because glibc has not been ported
-to them.
+Other operating systems may come with system tools that have all the
+necessary features, but this is moot because glibc hasn't been ported to
+them.
1.5. Which compiler should I use for powerpc?
-{GK} You want to use egcs 1.0.1 or later (together with the right versions
-of all the other tools, of course).
+{} Removed. Does not apply anymore.
-In fact, egcs 1.0.1 has a serious bug that prevents a clean make, relating
-to switch statement folding. It also causes the resulting shared libraries
-to use more memory than they should. There is a patch at:
-<http://discus.anu.edu.au/~geoffk/egcs-1.0.1-geoffk.diff>
+1.6. Which tools should I use for ARM?
-Later versions of egcs may fix these problems.
+{} Removed. Does not apply anymore.
-1.6. Do I need some more things to compile GNU C Library?
+1.7. Do I need some more things to compile the GNU C Library?
{UD} Yes, there are some more :-).
site. (We distribute compiled message catalogs, but they may not be
updated in patches.)
-* Some files depend on special tools. E.g., files ending in .gperf
- need a `gperf' program. The GNU version (part of libg++) is known
- to work while some vendor versions do not.
+* Some files are built with special tools. E.g., files ending in .gperf
+ need a `gperf' program. The GNU version (now available in a separate
+ package, formerly only as part of libg++) is known to work while some
+ vendor versions do not.
You should not need these tools unless you change the source files.
-* Some scripts need perl5 - but at the moment those scripts are not
- vital for building and installing GNU libc (some data files will not
- be created).
+* Perl 5 is needed if you wish to test an installation of GNU libc
+ as the primary C library.
* When compiling for Linux, the header files of the Linux kernel must
be available to the compiler as <linux/*.h> and <asm/*.h>.
-* lots of disk space (~170MB for i?86-linux; more for RISC platforms,
- as much as 400MB).
+* lots of disk space (~400MB for i?86-linux; more for RISC platforms).
* plenty of time. Compiling just the shared and static libraries for
- i?86-linux takes approximately 1h on an i586@133, or 2.5h on
- i486@66, or 4.5h on i486@33. Multiply this by 1.5 or 2.0 if you
- build profiling and/or the highly optimized version as well. For
- Hurd systems times are much higher.
+ 35mins on a 2xPIII@550Mhz w/ 512MB RAM. On a 2xUltraSPARC-II@360Mhz
+ w/ 1GB RAM it takes about 14 minutes. Multiply this by 1.5 or 2.0
+ if you build profiling and/or the highly optimized version as well.
+ For Hurd systems times are much higher.
You should avoid compiling in a NFS mounted filesystem. This is
very slow.
- James Troup <J.J.Troup@comp.brad.ac.uk> reports a compile time of
- 45h34m for a full build (shared, static, and profiled) on Atari
- Falcon (Motorola 68030 @ 16 Mhz, 14 Mb memory) and Jan Barte
- <yann@plato.uni-paderborn.de> reports 22h48m on Atari TT030
- (Motorola 68030 @ 32 Mhz, 34 Mb memory)
+ James Troup <J.J.Troup@comp.brad.ac.uk> reports a compile time for
+ an earlier (and smaller!) version of glibc of 45h34m for a full build
+ (shared, static, and profiled) on Atari Falcon (Motorola 68030 @ 16 Mhz,
+ 14 Mb memory) and Jan Barte <yann@plato.uni-paderborn.de> reports
+ 22h48m on Atari TT030 (Motorola 68030 @ 32 Mhz, 34 Mb memory)
+
+ A full build of the PowerPC library took 1h on a PowerPC 750@400Mhz w/
+ 64MB of RAM, and about 9h on a 601@60Mhz w/ 72Mb.
If you have some more measurements let me know.
-1.7. What version of the Linux kernel headers should be used?
+1.8. What version of the Linux kernel headers should be used?
{AJ,UD} The headers from the most recent Linux kernel should be used. The
headers used while compiling the GNU C library and the kernel binary used
problems on kernels that are older than the kernel headers used. The other
way round (compiling the GNU C library with old kernel headers and running
on a recent kernel) does not necessarily work. For example you can't use
-new kernel features when using old kernel headers for compiling the GNU C
+new kernel features if you used old kernel headers to compile the GNU C
library.
+{ZW} Even if you are using a 2.0 kernel on your machine, we recommend you
+compile GNU libc with 2.2 kernel headers. That way you won't have to
+recompile libc if you ever upgrade to kernel 2.2. To tell libc which
+headers to use, give configure the --with-headers switch
+(e.g. --with-headers=/usr/src/linux-2.2.0/include).
+
+Note that you must configure the 2.2 kernel if you do this, otherwise libc
+will be unable to find <linux/version.h>. Just change the current directory
+to the root of the 2.2 tree and do `make include/linux/version.h'.
-1.8. The compiler hangs while building iconvdata modules. What's
- wrong?
-{ZW} This is a problem with all current releases of GCC. Initialization of
-large static arrays is very slow. The compiler will eventually finish; give
-it time.
+1.9. The compiler hangs while building iconvdata modules. What's
+ wrong?
-The problem will be fixed in egcs 1.1 but probably not before then.
+{} Removed. Does not apply anymore.
-1.9. When I run `nm -u libc.so' on the produced library I still
+1.10. When I run `nm -u libc.so' on the produced library I still
find unresolved symbols. Can this be ok?
{UD} Yes, this is ok. There can be several kinds of unresolved symbols:
errors while linking before deciding there is a problem.
-1.10. What are these `add-ons'?
+1.11. What are these `add-ons'?
{UD} To avoid complications with export rules or external source code some
-optional parts of the libc are distributed as separate packages (e.g., the
-crypt package, see question 2.5).
+optional parts of the libc are distributed as separate packages, e.g., the
+linuxthreads package.
To use these packages as part of GNU libc, just unpack the tarfiles in the
libc source directory and tell the configuration script about them using the
it doesn't, or if you want to select only a subset of the add-ons, give a
comma-separated list of the add-ons to enable:
- configure --enable-add-ons=crypt,linuxthreads
+ configure --enable-add-ons=linuxthreads
for example.
else. The existing makefiles do most of the work; only some few stub rules
must be written to get everything running.
+Most add-ons are tightly coupled to a specific GNU libc version. Please
+check that the add-ons work with the GNU libc. For example the linuxthreads
+add-on has the same numbering scheme as the libc and will in general only
+work with the corresponding libc.
-1.11. My XXX kernel emulates a floating-point coprocessor for me.
+{AJ} With glibc 2.2 the crypt add-on and with glibc 2.1 the localedata
+add-on have been integrated into the normal glibc distribution, crypt and
+localedata are therefore not anymore add-ons.
+
+
+1.12. My XXX kernel emulates a floating-point coprocessor for me.
Should I enable --with-fp?
{ZW} An emulated FPU is just as good as a real one, as far as the C library
(libgcc.a for GNU C), because the calling conventions change.
-1.12. When compiling GNU libc I get lots of errors saying functions
+1.13. When compiling GNU libc I get lots of errors saying functions
in glibc are duplicated in libgcc.
{EY} This is *exactly* the same problem that I was having. The problem was
beginning and if it is not usable `configure' will bark.
-1.13. Why do I get messages about missing thread functions when I use
+1.14. Why do I get messages about missing thread functions when I use
librt? I don't even use threads.
{UD} In this case you probably mixed up your installation. librt uses
any other link path.
-1.14. What's the problem with configure --enable-omitfp?
+1.15. What's the problem with configure --enable-omitfp?
{AJ} When --enable-omitfp is set the libraries are built without frame
-pointers. Some compilers produce buggy code for this model and therefore we
+pointers. Some compilers produce buggy code for this model and therefore we
don't advise using it at the moment.
-If you use --enable-omitfp, you're on your own. If you encounter problems
+If you use --enable-omitfp, you're on your own. If you encounter problems
with a library that was build this way, we advise you to rebuild the library
without --enable-omitfp. If the problem vanishes consider tracking the
problem down and report it as compiler failure.
-Since a library build with --enable-omitfp is undebuggable on most systems,
-debuggable libraries are also built - you can use it by appending "_g" to
+Since a library built with --enable-omitfp is undebuggable on most systems,
+debuggable libraries are also built - you can use them by appending "_g" to
the library names.
The compilation of these extra libraries and the compiler optimizations slow
down the build process and need more disk space.
+
+1.16. I get failures during `make check'. What should I do?
+
+{AJ} The testsuite should compile and run cleanly on your system; every
+failure should be looked into. Depending on the failures, you probably
+should not install the library at all.
+
+You should consider using the `glibcbug' script to report the failure,
+providing as much detail as possible. If you run a test directly, please
+remember to set up the environment correctly. You want to test the compiled
+library - and not your installed one. The best way is to copy the exact
+command line which failed and run the test from the subdirectory for this
+test in the sources.
+
+There are some failures which are not directly related to the GNU libc:
+- Some compilers produce buggy code. No compiler gets single precision
+ complex numbers correct on Alpha. Otherwise, gcc-3.2 should be ok.
+- The kernel might have bugs. For example on Linux/Alpha 2.0.34 the
+ floating point handling has quite a number of bugs and therefore most of
+ the test cases in the math subdirectory will fail. Linux 2.2 has
+ fixes for the floating point support on Alpha. The Linux/SPARC kernel has
+ also some bugs in the FPU emulation code (as of Linux 2.2.0).
+- Other tools might have problems. For example bash 2.03 gives a
+ segmentation fault running the tst-rpmatch.sh test script.
+
+
+1.17. What is symbol versioning good for? Do I need it?
+
+{AJ} Symbol versioning solves problems that are related to interface
+changes. One version of an interface might have been introduced in a
+previous version of the GNU C library but the interface or the semantics of
+the function has been changed in the meantime. For binary compatibility
+with the old library, a newer library needs to still have the old interface
+for old programs. On the other hand, new programs should use the new
+interface. Symbol versioning is the solution for this problem. The GNU
+libc version 2.1 uses symbol versioning by default if the installed binutils
+supports it.
+
+We don't advise building without symbol versioning, since you lose binary
+compatibility - forever! The binary compatibility you lose is not only
+against the previous version of the GNU libc (version 2.0) but also against
+all future versions.
+
+
+1.18. How can I compile on my fast ix86 machine a working libc for my slow
+ i386? After installing libc, programs abort with "Illegal
+ Instruction".
+
+{AJ} glibc and gcc might generate some instructions on your machine that
+aren't available on i386. You've got to tell glibc that you're configuring
+for i386 with adding i386 as your machine, for example:
+
+ ../configure --prefix=/usr i386-pc-linux-gnu
+
+And you need to tell gcc to only generate i386 code, just add `-mcpu=i386'
+(just -m386 doesn't work) to your CFLAGS.
+
+{UD} This applies not only to the i386. Compiling on a i686 for any older
+model will also fail if the above methods are not used.
+
+
+1.19. `make' complains about a missing dlfcn/libdl.so when building
+ malloc/libmemprof.so. How can I fix this?
+
+{AJ} Older make version (<= 3.78.90) have a bug which was hidden by a bug in
+glibc (<= 2.1.2). You need to upgrade make to a newer or fixed version.
+
+After upgrading make, you should remove the file sysd-sorted in your build
+directory. The problem is that the broken make creates a wrong order for
+one list in that file. The list has to be recreated with the new make -
+which happens if you remove the file.
+
+You might encounter this bug also in other situations where make scans
+directories. I strongly advise to upgrade your make version to 3.79 or
+newer.
+
+
+1.20. Which tools should I use for MIPS?
+
+{AJ} You should use the current development version of gcc 3.2 or newer from
+CVS.
+
+You need also recent binutils, anything before and including 2.11 will not
+work correctly. Either try the Linux binutils 2.11.90.0.5 from HJ Lu or the
+current development version of binutils from CVS.
+
+Please note that `make check' might fail for a number of the math tests
+because of problems of the FPU emulation in the Linux kernel (the MIPS FPU
+doesn't handle all cases and needs help from the kernel).
+
+For details check also my page <http://www.suse.de/~aj/glibc-mips.html>.
+
+
+1.21. Which compiler should I use for powerpc64?
+
+{SM} You want to use at least gcc 3.2 (together with the right versions
+of all the other tools, of course).
+
\f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The dangers when installing glibc in /usr are twofold:
* glibc will overwrite the headers in /usr/include. Other C libraries
- install a different but overlapping set of headers there, so the
- effect will probably be that you can't compile anything. You need to
- rename /usr/include out of the way first. (Do not throw it away; you
- will then lose the ability to compile programs against your old libc.)
+ install a different but overlapping set of headers there, so the effect
+ will probably be that you can't compile anything. You need to rename
+ /usr/include out of the way before running `make install'. (Do not throw
+ it away; you will then lose the ability to compile programs against your
+ old libc.)
* None of your old libraries, static or shared, can be used with a
different C library major version. For shared libraries this is not a
`crypt' and `setkey'. Why aren't these functions in the
libc anymore?
-{UD} The US places restrictions on exporting cryptographic programs and
-source code. Until this law gets abolished we cannot ship the cryptographic
-functions together with glibc.
-
-The functions are available, as an add-on (see question 1.10). People in the US
-may get it from the same place they got GNU libc from. People outside the
-US should get the code from ftp://ftp.ifi.uio.no/pub/gnu, or another archive
-site outside the USA. The README explains how to install the sources.
-
-If you already have the crypt code on your system the reason for the failure
-is probably that you did not link with -lcrypt. The crypto functions are in
-a separate library to make it possible to export GNU libc binaries from the
-US.
+{} Removed. Does not apply anymore.
2.6. When I use GNU libc on my Linux system by linking against
the libc.so which comes with glibc all I get is a core dump.
{UD} On Linux, gcc sets the dynamic linker to /lib/ld-linux.so.1 unless the
-user specifies a -dynamic-linker argument. This is the name of the libc5
+user specifies a --dynamic-linker argument. This is the name of the libc5
dynamic linker, which does not work with glibc.
-For casual use of GNU libc you can just specify
- -dynamic-linker=/lib/ld-linux.so.2
+For casual use of GNU libc you can just specify to the linker
+ --dynamic-linker=/lib/ld-linux.so.2
which is the glibc dynamic linker, on Linux systems. On other systems the
-name is /lib/ld.so.1.
+name is /lib/ld.so.1. When linking via gcc, you've got to add
+ -Wl,--dynamic-linker=/lib/ld-linux.so.2
+
+to the gcc command line.
To change your environment to use GNU libc for compiling you need to change
the `specs' file of your gcc. This file is normally found at
GROUP ( libc.so.6 libc_nonshared.a )
-2.8. How can I compile gcc 2.7.2.1 from the gcc source code using
+2.8. When I run an executable on one system which I compiled on
+ another, I get dynamic linker errors. Both systems have the same
+ version of glibc installed. What's wrong?
+
+{ZW} Glibc on one of these systems was compiled with gcc 2.7 or 2.8, the
+other with egcs (any version). Egcs has functions in its internal
+`libgcc.a' to support exception handling with C++. They are linked into
+any program or dynamic library compiled with egcs, whether it needs them or
+not. Dynamic libraries then turn around and export those functions again
+unless special steps are taken to prevent them.
+
+When you link your program, it resolves its references to the exception
+functions to the ones exported accidentally by libc.so. That works fine as
+long as libc has those functions. On the other system, libc doesn't have
+those functions because it was compiled by gcc 2.8, and you get undefined
+symbol errors. The symbols in question are named things like
+`__register_frame_info'.
+
+For glibc 2.0, the workaround is to not compile libc with egcs. We've also
+incorporated a patch which should prevent the EH functions sneaking into
+libc. It doesn't matter what compiler you use to compile your program.
+
+For glibc 2.1, we've chosen to do it the other way around: libc.so
+explicitly provides the EH functions. This is to prevent other shared
+libraries from doing it.
+
+{UD} Starting with glibc 2.1.1 you can compile glibc with gcc 2.8.1 or
+newer since we have explicitly add references to the functions causing the
+problem. But you nevertheless should use EGCS for other reasons
+(see question 1.2).
+
+{GK} On some Linux distributions for PowerPC, you can see this when you have
+built gcc or egcs from the Web sources (gcc versions 2.95 or earlier), then
+re-built glibc. This happens because in these versions of gcc, exception
+handling is implemented using an older method; the people making the
+distributions are a little ahead of their time.
+
+A quick solution to this is to find the libgcc.a file that came with the
+distribution (it would have been installed under /usr/lib/gcc-lib), do
+`ar x libgcc.a frame.o' to get the frame.o file out, and add a line saying
+`LDLIBS-c.so += frame.o' to the file `configparms' in the directory you're
+building in. You can check you've got the right `frame.o' file by running
+`nm frame.o' and checking that it has the symbols defined that you're
+missing.
+
+This will let you build glibc with the C compiler. The C++ compiler
+will still be binary incompatible with any C++ shared libraries that
+you got with your distribution.
+
+
+2.9. How can I compile gcc 2.7.2.1 from the gcc source code using
glibc 2.x?
{AJ} There's only correct support for glibc 2.0.x in gcc 2.7.2.3 or later.
-But you should get at least gcc 2.8.1 or egcs 1.0.2 (or later versions)
-instead.
+But you should get at least gcc 2.95.3 (or later versions) anyway
-2.9. The `gencat' utility cannot process the catalog sources which
+2.10. The `gencat' utility cannot process the catalog sources which
were used on my Linux libc5 based system. Why?
{UD} The `gencat' utility provided with glibc complies to the XPG standard.
-----------------------------------------------------------------------
# Change catalog source in Linux specific format to standard XPG format.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
+# Ulrich Drepper <drepper@redhat.com>, 1996.
#
/^\$ #/ {
h
-----------------------------------------------------------------------
-2.10. Programs using libc have their messages translated, but other
+2.11. Programs using libc have their messages translated, but other
behavior is not localized (e.g. collating order); why?
{ZW} Translated messages are automatically installed, but the locale
Please see localedata/README in the source tree for further details.
-2.11. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
+2.12. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
works great. But the glibc NIS+ doesn't seem to work.
{TK} The glibc NIS+ implementation uses a /var/nis/NIS_COLD_START file for
byte order independent) or generate it with nisinit from the nis-tools
package; available at
- http://www-vt.uni-paderborn.de/~kukuk/linux/nisplus.html
+ http://www.suse.de/~kukuk/linux/nisplus.html
-2.12. I have killed ypbind to stop using NIS, but glibc
+2.13. I have killed ypbind to stop using NIS, but glibc
continues using NIS.
{TK} For faster NIS lookups, glibc uses the /var/yp/binding/ files from
glibc will continue to use them. Other BSD versions seem to work correctly.
Until ypbind 3.4 is released, you can find a patch at
- ftp://ftp.kernel.org/pub/linux/utils/net/NIS/ypbind-3.3-glibc3.diff.
+ <ftp://ftp.kernel.org/pub/linux/utils/net/NIS/ypbind-3.3-glibc4.diff.gz>
-2.13. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
+2.14. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
RPC: Unable to receive; errno = Connection refused" when using NIS.
{TK} You need a ypbind version which is 64bit clean. Some versions are not
know about other versions.
-2.14. After installing glibc name resolving doesn't work properly.
+2.15. After installing glibc name resolving doesn't work properly.
{AJ} You probably should read the manual section describing nsswitch.conf
(just type `info libc "NSS Configuration File"'). The NSS configuration
file is usually the culprit.
-2.15. How do I create the databases for NSS?
+2.16. How do I create the databases for NSS?
{AJ} If you have an entry "db" in /etc/nsswitch.conf you should also create
the database files. The glibc sources contain a Makefile which does the
-neccessary conversion and calls to create those files. The file is
+necessary conversion and calls to create those files. The file is
`db-Makefile' in the subdirectory `nss' and you can call it with `make -f
db-Makefile'. Please note that not all services are capable of using a
database. Currently passwd, group, ethers, protocol, rpc, services shadow
-and netgroup are implemented.
+and netgroup are implemented. See also question 2.31.
-2.16. I have /usr/include/net and /usr/include/scsi as symlinks
+2.17. I have /usr/include/net and /usr/include/scsi as symlinks
into my Linux source tree. Is that wrong?
{PB} This was necessary for libc5, but is not correct when using glibc.
/usr/include/linux should remain as they were.
-2.17. Programs like `logname', `top', `uptime' `users', `w' and
+2.18. Programs like `logname', `top', `uptime' `users', `w' and
`who', show incorrect information about the (number of)
users on my system. Why?
{MK} See question 3.2.
-2.18. After upgrading to glibc 2.1 with symbol versioning I get
+2.19. After upgrading to glibc 2.1 with symbol versioning I get
errors about undefined symbols. What went wrong?
{AJ} The problem is caused either by wrong program code or tools. In the
symbol versioning.
-2.19. When I start the program XXX after upgrading the library
+2.20. When I start the program XXX after upgrading the library
I get
XXX: Symbol `_sys_errlist' has different size in shared
object, consider re-linking
So in case of doubt report such a warning message as a problem.
-2.20. What do I need for C++ development?
+2.21. What do I need for C++ development?
+
+{HJ,AJ} You need either egcs 1.1 which comes directly with libstdc++ or
+gcc-2.8.1 together with libstdc++ 2.8.1.1. egcs 1.1 has the better C++
+support and works directly with glibc 2.1. If you use gcc-2.8.1 with
+libstdc++ 2.8.1.1, you need to modify libstdc++ a bit. A patch is available
+as:
+ <ftp://alpha.gnu.org/gnu/libstdc++-2.8.1.1-glibc2.1-diff.gz>
-{HJ,AJ} You need either egcs 1.0.2 or gcc-2.8.1 with libstdc++ 2.8.1 (or
-more recent versions). libg++ 2.7.2 (and the Linux Versions 2.7.2.x) doesn't
-work very well with the GNU C library due to vtable thunks. If you're
-upgrading from glibc 2.0.x to 2.1 you have to recompile libstdc++ since the
-library compiled for 2.0 is not compatible due to the new Large File Support
-(LFS) in version 2.1.
+Please note that libg++ 2.7.2 (and the Linux Versions 2.7.2.x) doesn't work
+very well with the GNU C library due to vtable thunks. If you're upgrading
+from glibc 2.0.x to 2.1 you have to recompile libstdc++ since the library
+compiled for 2.0 is not compatible due to the new Large File Support (LFS)
+in version 2.1.
+{UD} But since in the case of a shared libstdc++ the version numbers should
+be different existing programs will continue to work.
-2.21. Even statically linked programs need some shared libraries
+
+2.22. Even statically linked programs need some shared libraries
which is not acceptable for me. What can I do?
{AJ} NSS (for details just type `info libc "Name Service Switch"') won't
(change /etc/nsswitch.conf for this). You need to link explicitly against
all these services. For example:
- gcc -static test-netdb.c -o test-netdb.c \
- -lc -lnss_files -lnss_dns -lresolv
+ gcc -static test-netdb.c -o test-netdb \
+ -Wl,--start-group -lc -lnss_files -lnss_dns -lresolv -Wl,--end-group
The problem with this approach is that you've got to link every static
program that uses NSS routines with all those libraries.
*highly* recommended *not* to use --enable-static-nss since this makes
the behaviour of the programs on the system inconsistent.
+
+2.23. I just upgraded my Linux system to glibc and now I get
+ errors whenever I try to link any program.
+
+{ZW} This happens when you have installed glibc as the primary C library but
+have stray symbolic links pointing at your old C library. If the first
+`libc.so' the linker finds is libc 5, it will use that. Your program
+expects to be linked with glibc, so the link fails.
+
+The most common case is that glibc put its `libc.so' in /usr/lib, but there
+was a `libc.so' from libc 5 in /lib, which gets searched first. To fix the
+problem, just delete /lib/libc.so. You may also need to delete other
+symbolic links in /lib, such as /lib/libm.so if it points to libm.so.5.
+
+{AJ} The perl script test-installation.pl which is run as last step during
+an installation of glibc that is configured with --prefix=/usr should help
+detect these situations. If the script reports problems, something is
+really screwed up.
+
+
+2.24. When I use nscd the machine freezes.
+
+{UD} You cannot use nscd with Linux 2.0.*. There is functionality missing
+in the kernel and work-arounds are not suitable. Besides, some parts of the
+kernel are too buggy when it comes to using threads.
+
+If you need nscd, you have to use at least a 2.1 kernel.
+
+Note that I have at this point no information about any other platform.
+
+
+2.25. I need lots of open files. What do I have to do?
+
+{AJ} This is at first a kernel issue. The kernel defines limits with
+OPEN_MAX the number of simultaneous open files and with FD_SETSIZE the
+number of used file descriptors. You need to change these values in your
+kernel and recompile the kernel so that the kernel allows more open
+files. You don't necessarily need to recompile the GNU C library since the
+only place where OPEN_MAX and FD_SETSIZE is really needed in the library
+itself is the size of fd_set which is used by select.
+
+The GNU C library is now select free. This means it internally has no
+limits imposed by the `fd_set' type. Instead all places where the
+functionality is needed the `poll' function is used.
+
+If you increase the number of file descriptors in the kernel you don't need
+to recompile the C library.
+
+{UD} You can always get the maximum number of file descriptors a process is
+allowed to have open at any time using
+
+ number = sysconf (_SC_OPEN_MAX);
+
+This will work even if the kernel limits change.
+
+
+2.26. How do I get the same behavior on parsing /etc/passwd and
+ /etc/group as I have with libc5 ?
+
+{TK} The name switch setup in /etc/nsswitch.conf selected by most Linux
+distributions does not support +/- and netgroup entries in the files like
+/etc/passwd. Though this is the preferred setup some people might have
+setups coming over from the libc5 days where it was the default to recognize
+lines like this. To get back to the old behaviour one simply has to change
+the rules for passwd, group, and shadow in the nsswitch.conf file as
+follows:
+
+passwd: compat
+group: compat
+shadow: compat
+
+passwd_compat: nis
+group_compat: nis
+shadow_compat: nis
+
+
+2.27. What needs to be recompiled when upgrading from glibc 2.0 to glibc
+ 2.1?
+
+{AJ,CG} If you just upgrade the glibc from 2.0.x (x <= 7) to 2.1, binaries
+that have been linked against glibc 2.0 will continue to work.
+
+If you compile your own binaries against glibc 2.1, you also need to
+recompile some other libraries. The problem is that libio had to be changed
+and therefore libraries that are based or depend on the libio of glibc,
+e.g. ncurses, slang and most C++ libraries, need to be recompiled. If you
+experience strange segmentation faults in your programs linked against glibc
+2.1, you might need to recompile your libraries.
+
+Another problem is that older binaries that were linked statically against
+glibc 2.0 will reference the older nss modules (libnss_files.so.1 instead of
+libnss_files.so.2), so don't remove them. Also, the old glibc-2.0 compiled
+static libraries (libfoo.a) which happen to depend on the older libio
+behavior will be broken by the glibc 2.1 upgrade. We plan to produce a
+compatibility library that people will be able to link in if they want
+to compile a static library generated against glibc 2.0 into a program
+on a glibc 2.1 system. You just add -lcompat and you should be fine.
+
+The glibc-compat add-on will provide the libcompat.a library, the older
+nss modules, and a few other files. Together, they should make it
+possible to do development with old static libraries on a glibc 2.1
+system. This add-on is still in development. You can get it from
+ <ftp://alpha.gnu.org/gnu/glibc/glibc-compat-2.1.tar.gz>
+but please keep in mind that it is experimental.
+
+
+2.28. Why is extracting files via tar so slow?
+
+{AJ} Extracting of tar archives might be quite slow since tar has to look up
+userid and groupids and doesn't cache negative results. If you have nis or
+nisplus in your /etc/nsswitch.conf for the passwd and/or group database,
+each file extractions needs a network connection. There are two possible
+solutions:
+
+- do you really need NIS/NIS+ (some Linux distributions add by default
+ nis/nisplus even if it's not needed)? If not, just remove the entries.
+
+- if you need NIS/NIS+, use the Name Service Cache Daemon nscd that comes
+ with glibc 2.1.
+
+
+2.29. Compiling programs I get parse errors in libio.h (e.g. "parse error
+ before `_IO_seekoff'"). How should I fix this?
+
+{AJ} You might get the following errors when upgrading to glibc 2.1:
+
+ In file included from /usr/include/stdio.h:57,
+ from ...
+ /usr/include/libio.h:335: parse error before `_IO_seekoff'
+ /usr/include/libio.h:335: parse error before `_G_off64_t'
+ /usr/include/libio.h:336: parse error before `_IO_seekpos'
+ /usr/include/libio.h:336: parse error before `_G_fpos64_t'
+
+The problem is a wrong _G_config.h file in your include path. The
+_G_config.h file that comes with glibc 2.1 should be used and not one from
+libc5 or from a compiler directory. To check which _G_config.h file the
+compiler uses, compile your program with `gcc -E ...|grep G_config.h' and
+remove that file. Your compiler should pick up the file that has been
+installed by glibc 2.1 in your include directory.
+
+
+2.30. After upgrading to glibc 2.1, libraries that were compiled against
+ glibc 2.0.x don't work anymore.
+
+{AJ} See question 2.27.
+
+
+2.31. What happened to the Berkeley DB libraries? Can I still use db
+ in /etc/nsswitch.conf?
+
+{AJ} Due to too many incompatible changes in disk layout and API of Berkeley
+DB and a too tight coupling of libc and libdb, the db library has been
+removed completely from glibc 2.2. The only place that really used the
+Berkeley DB was the NSS db module.
+
+The NSS db module has been rewritten to support a number of different
+versions of Berkeley DB for the NSS db module. Currently the releases 2.x
+and 3.x of Berkeley DB are supported. The older db 1.85 library is not
+supported. You can use the version from glibc 2.1.x or download a version
+from Sleepycat Software (http://www.sleepycat.com). The library has to be
+compiled as shared library and installed in the system lib directory
+(normally /lib). The library needs to have a special soname to be found by
+the NSS module.
+
+If public structures change in a new Berkeley db release, this needs to be
+reflected in glibc.
+
+Currently the code searches for libraries with a soname of "libdb.so.3"
+(that's the name from db 2.4.14 which comes with glibc 2.1.x) and
+"libdb-3.0.so" (the name used by db 3.0.55 as default).
+
+The nss_db module is now in a separate package since it requires a database
+library being available.
+
+
+2.32. What has do be done when upgrading to glibc 2.2?
+
+{AJ} The upgrade to glibc 2.2 should run smoothly, there's in general no
+need to recompile programs or libraries. Nevertheless, some changes might
+be needed after upgrading:
+- The utmp daemon has been removed and is not supported by glibc anymore.
+ If it has been in use, it should be switched off.
+- Programs using IPv6 have to be recompiled due to incompatible changes in
+ sockaddr_in6 by the IPv6 working group.
+- The Berkeley db libraries have been removed (for details see question 2.31).
+- The format of the locale files has changed, all locales should be
+ regenerated with localedef. All statically linked applications which use
+ i18n should be recompiled, otherwise they'll not be localized.
+- glibc comes with a number of new applications. For example ldconfig has
+ been implemented for glibc, the libc5 version of ldconfig is not needed
+ anymore.
+- There's no more K&R compatibility in the glibc headers. The GNU C library
+ requires a C compiler that handles especially prototypes correctly.
+ Especially gcc -traditional will not work with glibc headers.
+
+Please read also the NEWS file which is the authoritative source for this
+and gives more details for some topics.
+
+
+2.33. The makefiles want to do a CVS commit.
+
+{UD} Only if you are not specifying the --without-cvs flag at configure
+time. This is what you always have to use if you are checking sources
+directly out of the public CVS repository or you have your own private
+repository.
+
+
+2.34. When compiling C++ programs, I get a compilation error in streambuf.h.
+
+{BH} You are using g++ 2.95.2? After upgrading to glibc 2.2, you need to
+apply a patch to the include files in /usr/include/g++, because the fpos_t
+type has changed in glibc 2.2. The patch is at
+
+ http://www.haible.de/bruno/gccinclude-glibc-2.2-compat.diff
+
+
+2.35. When recompiling GCC, I get compilation errors in libio.
+
+{BH} You are trying to recompile gcc 2.95.2? Use gcc 2.95.3 instead.
+This version is needed because the fpos_t type and a few libio internals
+have changed in glibc 2.2, and gcc 2.95.3 contains a corresponding patch.
+
+
+2.36. Why shall glibc never get installed on GNU/Linux systems in
+/usr/local?
+
+{AJ} The GNU C compiler treats /usr/local/include and /usr/local/lib in a
+special way, these directories will be searched before the system
+directories. Since on GNU/Linux the system directories /usr/include and
+/usr/lib contain a --- possibly different --- version of glibc and mixing
+certain files from different glibc installations is not supported and will
+break, you risk breaking your complete system. If you want to test a glibc
+installation, use another directory as argument to --prefix. If you like to
+install this glibc version as default version, overriding the existing one,
+use --prefix=/usr and everything will go in the right places.
+
+
+2.37. When recompiling GCC, I get compilation errors in libstdc++.
+
+{BH} You are trying to recompile gcc 3.2? You need to patch gcc 3.2,
+because some last minute changes were made in glibc 2.3 which were not
+known when gcc 3.2 was released. The patch is at
+
+ http://www.haible.de/bruno/gcc-3.2-glibc-2.3-compat.diff
+
\f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
but this is what a major release is for. It's better to have a cut now than
having no means to support the new techniques later.
-{MK} There is however a (partial) solution for this problem. Please take a
-look at the file `login/README.utmpd'.
-
3.3. Where are the DST_* constants found in <sys/time.h> on many
systems?
defined).
Instead GNU libc contains zone database support and compatibility code for
-POSIX TZ environment variable handling.
+POSIX TZ environment variable handling. For former is very much preferred
+(see question 4.3).
3.4. The prototypes for `connect', `accept', `getsockopt',
functions. Why?
{AJ} glibc 2.1 has special string functions that are faster than the normal
-library functions. Some of the functions are additionally implemented as
-inline functions and others as macros.
+library functions. Some of the functions are additionally implemented as
+inline functions and others as macros. This might lead to problems with
+existing codes but it is explicitly allowed by ISO C.
The optimized string functions are only used when compiling with
-optimizations (-O1 or higher). The behavior can be changed with two feature
+optimizations (-O1 or higher). The behavior can be changed with two feature
macros:
* __NO_STRING_INLINES: Don't do any string optimizations.
Since some of these string functions are now additionally defined as macros,
code like "char *strncpy();" doesn't work anymore (and is unnecessary, since
-<string.h> has the necessary declarations). Either change your code or
+<string.h> has the necessary declarations). Either change your code or
define __NO_STRING_INLINES.
{UD} Another problem in this area is that gcc still has problems on machines
stdin/stdout/stderr. Why?
{RM,AJ} Constructs like:
-static FILE *InPtr = stdin;
+ static FILE *InPtr = stdin;
-lead to this message. This is correct behaviour with glibc since stdin is
-not a constant expression. Please note that a strict reading of ISO C does
+lead to this message. This is correct behaviour with glibc since stdin is
+not a constant expression. Please note that a strict reading of ISO C does
not allow above constructs.
One of the advantages of this is that you can assign to stdin, stdout, and
stderr just like any other global variable (e.g. `stdout = my_stream;'),
which can be very useful with custom streams that you can write with libio
-(but beware this is not necessarily portable). The reason to implement it
+(but beware this is not necessarily portable). The reason to implement it
this way were versioning problems with the size of the FILE structure.
+To fix those programs you've got to initialize the variable at run time.
+This can be done, e.g. in main, like:
+
+ static FILE *InPtr;
+ int main(void)
+ {
+ InPtr = stdin;
+ }
+
+or by constructors (beware this is gcc specific):
+
+ static FILE *InPtr;
+ static void inPtr_construct (void) __attribute__((constructor));
+ static void inPtr_construct (void) { InPtr = stdin; }
+
3.10. I can't compile with gcc -traditional (or
-traditional-cpp). Why?
{AJ} glibc2 does break -traditional and -traditonal-cpp - and will continue
-to do so. For example constructs of the form:
+to do so. For example constructs of the form:
-enum {foo
-#define foo foo
-}
+ enum {foo
+ #define foo foo
+ }
are useful for debugging purposes (you can use foo with your debugger that's
why we need the enum) and for compatibility (other systems use defines and
{AJ} The GNU C library is compatible with the ANSI/ISO C standard. If
you're using `gcc -ansi', the glibc includes which are specified in the
-standard follow the standard. The ANSI/ISO C standard defines what has to be
+standard follow the standard. The ANSI/ISO C standard defines what has to be
in the include files - and also states that nothing else should be in the
include files (btw. you can still enable additional standards with feature
flags).
internal interfaces might change between glibc releases or dropped
completely.
+
+3.13. When using the db-2 library which comes with glibc is used in
+ the Perl db modules the testsuite is not passed. This did not
+ happen with db-1, gdbm, or ndbm.
+
+{} Removed. Does not apply anymore.
+
+
+3.14. The pow() inline function I get when including <math.h> is broken.
+ I get segmentation faults when I run the program.
+
+{UD} Nope, the implementation is correct. The problem is with egcs version
+prior to 1.1. I.e., egcs 1.0 to 1.0.3 are all broken (at least on Intel).
+If you have to use this compiler you must define __NO_MATH_INLINES before
+including <math.h> to prevent the inline functions from being used. egcs 1.1
+fixes the problem. I don't know about gcc 2.8 and 2.8.1.
+
+
+3.15. The sys/sem.h file lacks the definition of `union semun'.
+
+{UD} Nope. This union has to be provided by the user program. Former glibc
+versions defined this but it was an error since it does not make much sense
+when thinking about it. The standards describing the System V IPC functions
+define it this way and therefore programs must be adopted.
+
+
+3.16. Why has <netinet/ip_fw.h> disappeared?
+
+{AJ} The corresponding Linux kernel data structures and constants are
+totally different in Linux 2.0 and Linux 2.2. This situation has to be
+taken care in user programs using the firewall structures and therefore
+those programs (ipfw is AFAIK the only one) should deal with this problem
+themselves.
+
+
+3.17. I get floods of warnings when I use -Wconversion and include
+ <string.h> or <math.h>.
+
+{ZW} <string.h> and <math.h> intentionally use prototypes to override
+argument promotion. -Wconversion warns about all these. You can safely
+ignore the warnings.
+
+-Wconversion isn't really intended for production use, only for shakedown
+compiles after converting an old program to standard C.
+
+
+3.18. After upgrading to glibc 2.1, I receive errors about
+ unresolved symbols, like `_dl_initial_searchlist' and can not
+ execute any binaries. What went wrong?
+
+{AJ} This normally happens if your libc and ld (dynamic linker) are from
+different releases of glibc. For example, the dynamic linker
+/lib/ld-linux.so.2 comes from glibc 2.0.x, but the version of libc.so.6 is
+from glibc 2.1.
+
+The path /lib/ld-linux.so.2 is hardcoded in every glibc2 binary but
+libc.so.6 is searched via /etc/ld.so.cache and in some special directories
+like /lib and /usr/lib. If you run configure with another prefix than /usr
+and put this prefix before /lib in /etc/ld.so.conf, your system will break.
+
+So what can you do? Either of the following should work:
+
+* Run `configure' with the same prefix argument you've used for glibc 2.0.x
+ so that the same paths are used.
+* Replace /lib/ld-linux.so.2 with a link to the dynamic linker from glibc
+ 2.1.
+
+You can even call the dynamic linker by hand if everything fails. You've
+got to set LD_LIBRARY_PATH so that the corresponding libc is found and also
+need to provide an absolute path to your binary:
+
+ LD_LIBRARY_PATH=<path-where-libc.so.6-lives> \
+ <path-where-corresponding-dynamic-linker-lives>/ld-linux.so.2 \
+ <path-to-binary>/binary
+
+For example `LD_LIBRARY_PATH=/libold /libold/ld-linux.so.2 /bin/mv ...'
+might be useful in fixing a broken system (if /libold contains dynamic
+linker and corresponding libc).
+
+With that command line no path is used. To further debug problems with the
+dynamic linker, use the LD_DEBUG environment variable, e.g.
+`LD_DEBUG=help echo' for the help text.
+
+If you just want to test this release, don't put the lib directory in
+/etc/ld.so.conf. You can call programs directly with full paths (as above).
+When compiling new programs against glibc 2.1, you've got to specify the
+correct paths to the compiler (option -I with gcc) and linker (options
+--dynamic-linker, -L and --rpath).
+
+
+3.19. bonnie reports that char i/o with glibc 2 is much slower than with
+ libc5. What can be done?
+
+{AJ} The GNU C library uses thread safe functions by default and libc5 used
+non thread safe versions. The non thread safe functions have in glibc the
+suffix `_unlocked', for details check <stdio.h>. Using `putc_unlocked' etc.
+instead of `putc' should give nearly the same speed with bonnie (bonnie is a
+benchmark program for measuring disk access).
+
+
+3.20. Programs compiled with glibc 2.1 can't read db files made with glibc
+ 2.0. What has changed that programs like rpm break?
+
+{} Removed. Does not apply anymore.
+
+
+3.21. Autoconf's AC_CHECK_FUNC macro reports that a function exists, but
+ when I try to use it, it always returns -1 and sets errno to ENOSYS.
+
+{ZW} You are using a 2.0 Linux kernel, and the function you are trying to
+use is only implemented in 2.1/2.2. Libc considers this to be a function
+which exists, because if you upgrade to a 2.2 kernel, it will work. One
+such function is sigaltstack.
+
+Your program should check at runtime whether the function works, and
+implement a fallback. Note that Autoconf cannot detect unimplemented
+functions in other systems' C libraries, so you need to do this anyway.
+
+
+3.22. My program segfaults when I call fclose() on the FILE* returned
+ from setmntent(). Is this a glibc bug?
+
+{GK} No. Don't do this. Use endmntent(), that's what it's for.
+
+In general, you should use the correct deallocation routine. For instance,
+if you open a file using fopen(), you should deallocate the FILE * using
+fclose(), not free(), even though the FILE * is also a pointer.
+
+In the case of setmntent(), it may appear to work in most cases, but it
+won't always work. Unfortunately, for compatibility reasons, we can't
+change the return type of setmntent() to something other than FILE *.
+
+
+3.23. I get "undefined reference to `atexit'"
+
+{UD} This means that your installation is somehow broken. The situation is
+the same as for 'stat', 'fstat', etc (see question 2.7). Investigate why the
+linker does not pick up libc_nonshared.a.
+
+If a similar message is issued at runtime this means that the application or
+DSO is not linked against libc. This can cause problems since 'atexit' is
+not exported anymore.
+
\f
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
where the headers are stable. There are still lots of incompatible changes
made and the libc headers have to follow.
-Also, make sure you have a suitably recent kernel. As of the 970401
-snapshot, according to Philip Blundell <Philip.Blundell@pobox.com>, the
-required kernel version is at least 2.1.30.
+{PB} The 2.1 release of GNU libc aims to comply with the current versions of
+all the relevant standards. The IPv6 support libraries for older Linux
+systems used a different naming convention and so code written to work with
+them may need to be modified. If the standards make incompatible changes in
+the future then the libc may need to change again.
+
+IPv6 will not work with a 2.0.x kernel. When kernel 2.2 is released it
+should contain all the necessary support; until then you should use the
+latest 2.1.x release you can find. As of 98/11/26 the currently recommended
+kernel for IPv6 is 2.1.129.
+
+Also, as of the 2.1 release the IPv6 API provided by GNU libc is not
+100% complete.
4.3. When I set the timezone by setting the TZ environment variable
{UD} The problem is that people still use the braindamaged POSIX method to
select the timezone using the TZ environment variable with a format EST5EDT
-or whatever. People, read the POSIX standard, the implemented behaviour is
+or whatever. People, if you insist on using TZ instead of the timezone
+database (see below), read the POSIX standard, the implemented behaviour is
correct! What you see is in fact the result of the decisions made while
POSIX.1 was created. We've only implemented the handling of TZ this way to
be POSIX compliant. It is not really meant to be used.
correct one to use: use the timezone database. This avoids all the problems
the POSIX method has plus it is much easier to use. Simply run the tzselect
shell script, answer the question and use the name printed in the end by
-making a symlink to /usr/share/zoneinfo/NAME (NAME is the returned value
-from tzselect) from the file /etc/localtime. That's all. You never again
-have to worry.
+making a symlink /etc/localtime pointing to /usr/share/zoneinfo/NAME (NAME
+is the returned value from tzselect). That's all. You never again have to
+worry.
So, please avoid sending bug reports about time related problems if you use
the POSIX method and you have not verified something is really broken by
reading the POSIX standards.
+
+4.4. What other sources of documentation about glibc are available?
+
+{AJ} The FSF has a page about the GNU C library at
+<http://www.gnu.org/software/libc/>. The problem data base of open and
+solved bugs in GNU libc is available at
+<http://www-gnats.gnu.org:8080/cgi-bin/wwwgnats.pl>. Eric Green has written
+a HowTo for converting from Linux libc5 to glibc2. The HowTo is accessible
+via the FSF page and at <http://www.imaxx.net/~thrytis/glibc>. Frodo
+Looijaard describes a different way installing glibc2 as secondary libc at
+<http://huizen.dds.nl/~frodol/glibc>.
+
+Please note that this is not a complete list.
+
+
+4.5. The timezone string for Sydney/Australia is wrong since even when
+ daylight saving time is in effect the timezone string is EST.
+
+{UD} The problem for some timezones is that the local authorities decided
+to use the term "summer time" instead of "daylight saving time". In this
+case the abbreviation character `S' is the same as the standard one. So,
+for Sydney we have
+
+ Eastern Standard Time = EST
+ Eastern Summer Time = EST
+
+Great! To get this bug fixed convince the authorities to change the laws
+and regulations of the country this effects. glibc behaves correctly.
+
+
+4.6. I've build make 3.77 against glibc 2.1 and now make gets
+ segmentation faults.
+
+{} Removed. Does not apply anymore, use make 3.79 or newer.
+
+
+4.7. Why do so many programs using math functions fail on my AlphaStation?
+
+{AO} The functions floor() and floorf() use an instruction that is not
+implemented in some old PALcodes of AlphaStations. This may cause
+`Illegal Instruction' core dumps or endless loops in programs that
+catch these signals. Updating the firmware to a 1999 release has
+fixed the problem on an AlphaStation 200 4/166.
+
+
+4.8. The conversion table for character set XX does not match with
+what I expect.
+
+{UD} I don't doubt for a minute that some of the conversion tables contain
+errors. We tried the best we can and relied on automatic generation of the
+data to prevent human-introduced errors but this still is no guarantee. If
+you think you found a problem please send a bug report describing it and
+give an authoritive reference. The latter is important since otherwise
+the current behaviour is as good as the proposed one.
+
+Before doing this look through the list of known problem first:
+
+- the GBK (simplified Chinese) encoding is based on Unicode tables. This
+ is good. These tables, however, differ slightly from the tables used
+ by the M$ people. The differences are these [+ Unicode, - M$]:
+
+ +0xA1AA 0x2015
+ +0xA844 0x2014
+ -0xA1AA 0x2014
+ -0xA844 0x2015
+
+ In addition the Unicode tables contain mappings for the GBK characters
+ 0xA8BC, 0xA8BF, 0xA989 to 0xA995, and 0xFE50 to 0xFEA0.
+
+- when mapping from EUC-CN to GBK and vice versa we ignore the fact that
+ the coded character at position 0xA1A4 maps to different Unicode
+ characters. Since the iconv() implementation can do whatever it wants
+ if it cannot directly map a character this is a perfectly good solution
+ since the semantics and appearance of the character does not change.
+
+
+4.9. How can I find out which version of glibc I am using in the moment?
+
+{UD} If you want to find out about the version from the command line simply
+run the libc binary. This is probably not possible on all platforms but
+where it is simply locate the libc DSO and start it as an application. On
+Linux like
+
+ /lib/libc.so.6
+
+This will produce all the information you need.
+
+What always will work is to use the API glibc provides. Compile and run the
+following little program to get the version information:
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#include <stdio.h>
+#include <gnu/libc-version.h>
+int main (void) { puts (gnu_get_libc_version ()); return 0; }
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This interface can also obviously be used to perform tests at runtime if
+this should be necessary.
+
+
+4.10. Context switching with setcontext() does not work from within
+ signal handlers.
+
+{DMT} The Linux implementations (IA-64, S390 so far) of setcontext()
+supports synchronous context switches only. There are several reasons for
+this:
+
+- UNIX provides no other (portable) way of effecting a synchronous
+ context switch (also known as co-routine switch). Some versions
+ support this via setjmp()/longjmp() but this does not work
+ universally.
+
+- As defined by the UNIX '98 standard, the only way setcontext()
+ could trigger an asychronous context switch is if this function
+ were invoked on the ucontext_t pointer passed as the third argument
+ to a signal handler. But according to draft 5, XPG6, XBD 2.4.3,
+ setcontext() is not among the set of routines that may be called
+ from a signal handler.
+
+- If setcontext() were to be used for asynchronous context switches,
+ all kinds of synchronization and re-entrancy issues could arise and
+ these problems have already been solved by real multi-threading
+ libraries (e.g., POSIX threads or Linux threads).
+
+- Synchronous context switching can be implemented entirely in
+ user-level and less state needs to be saved/restored than for an
+ asynchronous context switch. It is therefore useful to distinguish
+ between the two types of context switches. Indeed, some
+ application vendors are known to use setcontext() to implement
+ co-routines on top of normal (heavier-weight) pre-emptable threads.
+
+It should be noted that if someone was dead-bent on using setcontext()
+on the third arg of a signal handler, then IA-64 Linux could support
+this via a special version of sigaction() which arranges that all
+signal handlers start executing in a shim function which takes care of
+saving the preserved registers before calling the real signal handler
+and restoring them afterwards. In other words, we could provide a
+compatibility layer which would support setcontext() for asynchronous
+context switches. However, given the arguments above, I don't think
+that makes sense. setcontext() provides a decent co-routine interface
+and we should just discourage any asynchronous use (which just calls
+for trouble at any rate).
+
\f
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Answers were given by:
-{UD} Ulrich Drepper, <drepper@cygnus.com>
-{DMT} David Mosberger-Tang, <davidm@AZStarNet.com>
+{UD} Ulrich Drepper, <drepper@redhat.com>
+{DMT} David Mosberger-Tang, <davidm@hpl.hp.com>
{RM} Roland McGrath, <roland@gnu.org>
-{AJ} Andreas Jaeger, <aj@arthur.rhein-neckar.de>
+{AJ} Andreas Jaeger, <aj@suse.de>
{EY} Eric Youngdale, <eric@andante.jic.com>
{PB} Phil Blundell, <Philip.Blundell@pobox.com>
{MK} Mark Kettenis, <kettenis@phys.uva.nl>
{ZW} Zack Weinberg, <zack@rabi.phys.columbia.edu>
-{TK} Thorsten Kukuk, <kukuk@vt.uni-paderborn.de>
-{GK} Geoffrey Keating, <geoffk@ozemail.com.au>
+{TK} Thorsten Kukuk, <kukuk@suse.de>
+{GK} Geoffrey Keating, <geoffk@redhat.com>
{HJ} H.J. Lu, <hjl@gnu.org>
+{CG} Cristian Gafton, <gafton@redhat.com>
+{AO} Alexandre Oliva, <aoliva@redhat.com>
+{BH} Bruno Haible, <haible@clisp.cons.org>
+{SM} Steven Munroe, <sjmunroe@us.ibm.com>
\f
Local Variables:
mode:outline
git://sourceware.org / glibc.git / blobdiff