shlib-versions

   1 # This file defines the shared library version numbers we will install.
   2
   3 # The following lines list filename patterns matching canonical configurations,
   4 # and the associated versions to use for various libraries.  The entire
   5 # list is processed, with earlier entries taking precedence over later
   6 # entries.  So loose patterns at the end of the list can give defaults.
   7
   8 # This file can use cpp-style conditionals starting with % instead of #
   9 # to test the symbols defined in config.h by configure.
  10
  11 # In the optional third column, there can one or more symbol set names
  12 # listed, which must be in ascending version order reading left to right
  13 # and must appear in this same order in the Versions.def file.  Each listed
  14 # version subsumes all prior versions back to the previous listed version.
  15 #
  16 # An entry with DEFAULT in the second column gives a default third column
  17 # to apply on matching configurations when the matching entry for a particular
  18 # library has no third column.  The defaults must precede the entries they
  19 # apply to.
  20
  21 # Configuration         DEFAULT                 Earliest symbol set
  22 # -------------         ---------------         ------------------------------
  23
  24 s390x-.*-linux.*        DEFAULT                 GLIBC_2.2
  25 cris-.*-linux.*         DEFAULT                 GLIBC_2.2
  26 x86_64-.*-linux.*       DEFAULT                 GLIBC_2.2.5
  27 powerpc64-.*-linux.*    DEFAULT                 GLIBC_2.3
  28 .*-.*-gnu-gnu.*         DEFAULT                 GLIBC_2.2.6
  29
  30 # Configuration         Library=version         Earliest symbol set (optional)
  31 # -------------         ---------------         ------------------------------
  32
  33 # The interface to -lm depends mostly only on cpu, not on operating system.
  34 sparc64-.*-linux.*      libm=6                  GLIBC_2.2
  35 alpha.*-.*-linux.*      libm=6.1
  36 mips.*-.*-linux.*       libm=6                  GLIBC_2.0 GLIBC_2.2
  37 ia64-.*-linux.*         libm=6.1                GLIBC_2.2
  38 sh.*-.*-linux.*         libm=6                  GLIBC_2.2
  39 hppa.*-.*-.*            libm=6                  GLIBC_2.2
  40 .*-.*-linux.*           libm=6
  41 .*-.*-gnu-gnu.*         libm=6
  42
  43 # We provide libc.so.6 for Linux kernel versions 2.0 and later.
  44 alpha.*-.*-linux.*      libc=6.1
  45 # Working mips versions were never released between 2.0 and 2.2.
  46 mips.*-.*-linux.*       libc=6                  GLIBC_2.0 GLIBC_2.2
  47 ia64-.*-linux.*         libc=6.1                GLIBC_2.2
  48 sh.*-.*-linux.*         libc=6                  GLIBC_2.2
  49 sparc64-.*-linux.*      libc=6                  GLIBC_2.2
  50 hppa.*-.*-.*            libc=6                  GLIBC_2.2
  51 .*-.*-linux.*           libc=6
  52
  53 # libmachuser.so.1 corresponds to mach/*.defs as of Utah's UK22 release.
  54 .*-.*-gnu-gnu.*         libmachuser=1
  55
  56 # libhurduser.so.0.3 corresponds to hurd/*.defs as of 11 June 2002.
  57 .*-.*-gnu-gnu.*         libhurduser=0.3
  58
  59 # libc.so.0.3 is the first Hurd libc using libio.
  60 .*-.*-gnu-gnu.*         libc=0.3
  61
  62 # The dynamic loader also requires different names.
  63 i.86-.*-linux.*         ld=ld-linux.so.2
  64 sparc64-.*-linux.*      ld=ld-linux.so.2        GLIBC_2.2
  65 sparc.*-.*-linux.*      ld=ld-linux.so.2
  66 alpha.*-.*-linux.*      ld=ld-linux.so.2
  67 arm.*-.*-linux.*        ld=ld-linux.so.2
  68 sh.*-.*-linux.*         ld=ld-linux.so.2        GLIBC_2.2
  69 ia64-.*-linux.*         ld=ld-linux-ia64.so.2   GLIBC_2.2
  70 mips.*-.*-linux.*       ld=ld.so.1              GLIBC_2.0 GLIBC_2.2
  71 hppa.*-.*-.*            ld=ld.so.1              GLIBC_2.2
  72 s390x-.*-linux.*        ld=ld64.so.1            GLIBC_2.2
  73 powerpc64.*-.*-linux.*  ld=ld64.so.1            GLIBC_2.3
  74 cris-.*-linux.*         ld=ld.so.1              GLIBC_2.2
  75 x86_64-.*-linux.*       ld=ld-linux-x86-64.so.2 GLIBC_2.2.5
  76 # We use the ELF ABI standard name for the default.
  77 .*-.*-.*                ld=ld.so.1
  78
  79 # The -ldl interface (see <dlfcn.h>) is the same on all platforms.
  80 alpha.*-.*-linux.*      libdl=2.1
  81 mips.*-.*-linux.*       libdl=2                 GLIBC_2.0 GLIBC_2.2
  82 .*-.*-.*                libdl=2
  83
  84 # So far the -lutil interface is the same on all platforms, except for the
  85 # `struct utmp' format, which depends on libc.
  86 alpha.*-.*-linux.*      libutil=1.1
  87 .*-.*-.*                libutil=1
  88
  89 # Version number 2 is used on other systems for the BIND 4.9.5 resolver
  90 # interface.
  91 alpha.*-.*-linux.*      libresolv=2.1
  92 mips.*-.*-linux.*       libresolv=2             GLIBC_2.0 GLIBC_2.2
  93 .*-.*-.*                libresolv=2
  94
  95 # Interface revision of nss_* modules.  This must match NSS_SHLIB_REVISION
  96 # in nss/nsswitch.h, which determines the library names used for service
  97 # names given in /etc/nsswitch.conf.
  98 mips.*-.*-linux.*       libnss_files=2          GLIBC_2.0 GLIBC_2.2
  99 mips.*-.*-linux.*       libnss_dns=2            GLIBC_2.0 GLIBC_2.2
 100 mips.*-.*-linux.*       libnss_compat=2         GLIBC_2.0 GLIBC_2.2
 101 mips.*-.*-linux.*       libnss_nis=2            GLIBC_2.0 GLIBC_2.2
 102 mips.*-.*-linux.*       libnss_nisplus=2        GLIBC_2.0 GLIBC_2.2
 103 mips.*-.*-linux.*       libnss_ldap=2           GLIBC_2.0 GLIBC_2.2
 104 mips.*-.*-linux.*       libnss_hesiod=2         GLIBC_2.0 GLIBC_2.2
 105 .*-.*-.*                libnss_files=2
 106 .*-.*-.*                libnss_dns=2
 107 .*-.*-.*                libnss_compat=2
 108 .*-.*-.*                libnss_nis=2
 109 .*-.*-.*                libnss_nisplus=2
 110 .*-.*-.*                libnss_ldap=2
 111 .*-.*-.*                libnss_hesiod=2
 112
 113 # Version for libnsl with YP and NIS+ functions.
 114 alpha.*-.*-linux.*      libnsl=1.1
 115 mips.*-.*-linux.*       libnsl=1                GLIBC_2.0 GLIBC_2.2
 116 .*-.*-.*                libnsl=1
 117
 118 # This defines the shared library version numbers we will install.
 119 alpha.*-.*-linux.*      libcrypt=1.1
 120 .*-.*-.*                libcrypt=1
 121
 122 # The gross patch for programs assuming broken locale implementations.
 123 alpha.*-.*-linux.*      libBrokenLocale=1.1
 124 ia64-.*-.*              libBrokenLocale=1       GLIBC_2.2
 125 sh.*-.*-.*              libBrokenLocale=1       GLIBC_2.2
 126 sparc64-.*-.*           libBrokenLocale=1       GLIBC_2.2
 127 hppa-.*-.*              libBrokenLocale=1       GLIBC_2.2
 128 .*-.*-.*                libBrokenLocale=1
 129
 130 # The real-time library from POSIX.1b.
 131 mips.*-.*-linux.*       librt=1                 GLIBC_2.0 GLIBC_2.2
 132 .*-.*-.*                librt=1
 133
 134 # The asynchronous name lookup library.
 135 .*-.*-.*                libanl=1