1 Frequently Asked Questions about the GNU C Library
3 This document tries to answer questions a user might have when
4 installing and using glibc. Please make sure you read this before
5 sending questions or bug reports to the maintainers.
7 The GNU C library is very complex. The installation process has not
8 been completely automated; there are too many variables. You can do
9 substantial damage to your system by installing the library
10 incorrectly. Make sure you understand what you are undertaking before
13 If you have any questions you think should be answered in this document,
20 ?? What systems does the GNU C Library run on?
22 {UD} This is difficult to answer. The file `README' lists the
23 architectures GNU libc was known to run on *at some time*. This does
24 not mean that it still can be compiled and run on them now.
26 The systems glibc is known to work on as of this release, and most
27 probably in the future, are:
30 i[3456]86-*-linux-gnu Linux-2.x on Intel
31 m68k-*-linux-gnu Linux-2.x on Motorola 680x0
32 alpha-*-linux-gnu Linux-2.x on DEC Alpha
33 powerpc-*-linux-gnu Linux and MkLinux on PowerPC systems
34 sparc-*-linux-gnu Linux-2.x on SPARC
35 sparc64-*-linux-gnu Linux-2.x on UltraSPARC
37 Ports to other Linux platforms are in development, and may in fact
38 work already, but no one has sent us success reports for them.
39 Currently no ports to other operating systems are underway, although a
40 few people have expressed interest.
42 If you have a system not listed above (or in the `README' file) and
43 you are really interested in porting it, contact
47 ?? What compiler do I need to build GNU libc?
49 {UD} You must use GNU CC to compile GNU libc. A lot of extensions of
50 GNU CC are used to increase portability and speed.
52 GNU CC is found, like all other GNU packages, on
53 ftp://ftp.gnu.org/pub/gnu
54 and the many mirror sites. ftp.gnu.org is always overloaded, so try to find
57 You always should try to use the latest official release. Older
58 versions may not have all the features GNU libc requires. On most
59 supported platforms (for powerpc see question ?powerpc), 2.7.2.3 is
60 the earliest version that works at all.
62 ?? When I try to compile glibc I get only error messages.
65 {UD} You definitely need GNU make to translate GNU libc. No
66 other make program has the needed functionality.
68 We recommend version GNU make version 3.75. Versions 3.76 and 3.76.1
69 have bugs which appear when building big projects like GNU libc.
70 Versions before 3.74 have bugs and/or are missing features.
72 ?? Do I need a special linker or archiver?
74 {UD} You may be able to use your system linker, but GNU libc works
75 best with GNU binutils.
77 On systems where the native linker does not support weak symbols you
78 will not get a fully ISO C compliant C library. Generally speaking
79 you should use the GNU binutils if they provide at least the same
80 functionality as your system's tools.
82 Always get the newest release of GNU binutils available. Older
83 releases are known to have bugs that prevent a successful compilation.
85 {ZW} As of release 2.1 a linker supporting symbol versions is
86 required. For Linux, get binutils-2.8.1.0.17 or later. Other systems
87 may have native linker support, but it's moot right now, because glibc
88 has not been ported to them.
90 ??powerpc What tools do I need for powerpc?
92 {GK} For a successful installation you definitely need the most recent
93 tools. You can safely assume that anything earlier than binutils
94 2.8.1.0.17 and egcs-1.0 will have problems. We'd advise at the moment
95 binutils 2.8.1.0.18 and egcs-1.0.1.
97 In fact, egcs 1.0.1 currently has two serious bugs that prevent a
98 clean make; one relates to switch statement folding, for which there
99 is a temporary patch at
101 <http://discus.anu.edu.au/~geoffk/egcs-1.0-geoffk.diff.gz>
103 and the other relates to 'forbidden register spilled', for which the
106 CFLAGS-condvar.c += -fno-inline
108 in configparms. Later versions of egcs may fix these problems.
111 ?? Do I need some more things to compile GNU C Library?
113 {UD} Yes, there are some more :-).
115 * GNU gettext. This package contains the tools needed to construct
116 `message catalog' files containing translated versions of system
117 messages. See ftp://ftp.gnu.org/pub/gnu or better any mirror
118 site. (We distribute compiled message catalogs, but they may not be
121 * Some files depend on special tools. E.g., files ending in .gperf
122 need a `gperf' program. The GNU version (part of libg++) is known
123 to work while some vendor versions do not.
125 You should not need these tools unless you change the source files.
127 * Some scripts need perl5 - but at the moment those scripts are not
128 vital for building and installing GNU libc (some data files will not
131 * When compiling for Linux, the header files of the Linux kernel must
132 be available to the compiler as <linux/*.h> and <asm/*.h>.
134 * lots of disk space (~170MB for i?86-linux; more for RISC platforms).
136 * plenty of time. Compiling just the shared and static libraries for
137 i?86-linux takes approximately 1h on an i586@133, or 2.5h on
138 i486@66, or 4.5h on i486@33. Multiply this by 1.5 or 2.0 if you
139 build profiling and/or the highly optimized version as well. For
140 Hurd systems times are much higher.
142 You should avoid compiling in a NFS mounted filesystem. This is
145 James Troup <J.J.Troup@comp.brad.ac.uk> reports a compile time of
146 45h34m for a full build (shared, static, and profiled) on Atari
147 Falcon (Motorola 68030 @ 16 Mhz, 14 Mb memory) and Jan Barte
148 <yann@plato.uni-paderborn.de> reports 22h48m on Atari TT030
149 (Motorola 68030 @ 32 Mhz, 34 Mb memory)
151 If you have some more measurements let me know.
153 ?? What version of the Linux kernel headers should be used?
155 {AJ,UD} The headers from the most recent Linux kernel should be used.
156 The headers used while compiling the GNU C library and the kernel
157 binary used when using the library do not need to match. The GNU C
158 library runs without problems on kernels that are older than the
159 kernel headers used. The other way round (compiling the GNU C library
160 with old kernel headers and running on a recent kernel) does not
161 necessarily work. For example you can't use new kernel features when
162 using old kernel headers for compiling the GNU C library.
164 ?? When I run `nm -u libc.so' on the produced library I still
165 find unresolved symbols. Can this be ok?
167 {UD} Yes, this is ok. There can be several kinds of unresolved
170 * magic symbols automatically generated by the linker. These have names
171 like __start_* and __stop_*
173 * symbols starting with _dl_* come from the dynamic linker
175 * symbols resolved by using libgcc.a
176 (__udivdi3, __umoddi3, or similar)
178 * weak symbols, which need not be resolved at all (fabs for example)
180 Generally, you should make sure you find a real program which produces
181 errors while linking before deciding there is a problem.
183 ??addon What are these `add-ons'?
185 {UD} To avoid complications with export rules or external source
186 code some optional parts of the libc are distributed as separate
187 packages (e.g., the crypt package, see ?crypt).
189 To use these packages as part of GNU libc, just unpack the tarfiles in
190 the libc source directory and tell the configuration script about them
191 using the --enable-add-ons option. If you give just --enable-add-ons
192 configure tries to find all the add-on packages in your source tree.
193 This may not work. If it doesn't, or if you want to select only a
194 subset of the add-ons, give a comma-separated list of the add-ons to
197 configure --enable-add-ons=crypt,linuxthreads
201 Add-ons can add features (including entirely new shared libraries),
202 override files, provide support for additional architectures, and
203 just about anything else. The existing makefiles do most of the work;
204 only some few stub rules must be written to get everything running.
206 ?? My XXX kernel emulates a floating-point coprocessor for me.
207 Should I enable --with-fp?
209 {ZW} An emulated FPU is just as good as a real one, as far as the C
210 library is concerned. You only need to say --without-fp if your
211 machine has no way to execute floating-point instructions.
213 People who are interested in squeezing the last drop of performance
214 out of their machine may wish to avoid the trap overhead, but this is
215 far more trouble than it's worth: you then have to compile
216 *everything* this way, including the compiler's internal libraries
217 (libgcc.a for GNU C), because the calling conventions change.
219 ?? When compiling GNU libc I get lots of errors saying functions
220 in glibc are duplicated in libgcc.
222 {EY} This is *exactly* the same problem that I was having. The
223 problem was due to the fact that configure didn't correctly detect
224 that the linker flag --no-whole-archive was supported in my linker.
225 In my case it was because I had run ./configure with bogus CFLAGS, and
228 One thing that is particularly annoying about this problem is that
229 once this is misdetected, running configure again won't fix it unless
230 you first delete config.cache.
232 {UD} Starting with glibc-2.0.3 there should be a better test to avoid
233 some problems of this kind. The setting of CFLAGS is checked at the
234 very beginning and if it is not usable `configure' will bark.
236 ?? Why do I get messages about missing thread functions when I use
237 librt? I don't even use threads.
239 {UD} In this case you probably mixed up your installation. librt uses
240 threads internally and has implicit references to the thread library.
241 Normally these references are satisfied automatically but if the
242 thread library is not in the expected place you must tell the linker
243 where it is. When using GNU ld it works like this:
245 gcc -o foo foo.c -Wl,-rpath-link=/some/other/dir -lrt
247 The `/some/other/dir' should contain the thread library. `ld' will
248 use the given path to find the implicitly referenced library while not
249 disturbing any other link path.
251 ?? What's the problem with configure --enable-omitfp?
253 {AJ} When --enable-omitfp is set the libraries are built without frame
254 pointers. Some compilers produce buggy code for this model and
255 therefore we don't advise using it at the moment.
257 If you use --enable-omitfp, you're on your own. If you encounter
258 problems with a library that was build this way, we advise you to
259 rebuild the library without --enable-omitfp. If the problem vanishes
260 consider tracking the problem down and report it as compiler failure.
262 Since a library build with --enable-omitfp is undebuggable on most
263 systems, debuggable libraries are also built - you can use it by
264 appending "_g" to the library names.
266 The compilation of these extra libraries and the compiler optimizations
267 slow down the build process and need more disk space.
269 ? Installation and configuration issues
271 ?? Can I replace the libc on my Linux system with GNU libc?
273 {UD} You cannot replace any existing libc for Linux with GNU
274 libc. It is binary incompatible and therefore has a different major
275 version. You can, however, install it alongside your existing libc.
277 For Linux there are three major libc versions:
279 libc-5 original ELF libc
282 You can have any combination of these three installed. For more
283 information consult documentation for shared library handling. The
284 Makefiles of GNU libc will automatically generate the needed symbolic
285 links which the linker will use.
287 ?? How do I configure GNU libc so that the essential libraries
288 like libc.so go into /lib and the other into /usr/lib?
290 {UD,AJ} Like all other GNU packages GNU libc is designed to use a base
291 directory and install all files relative to this. The default is
292 /usr/local, because this is safe (it will not damage the system if
293 installed there). If you wish to install GNU libc as the primary C
294 library on your system, set the base directory to /usr (i.e. run
295 configure --prefix=/usr <other_options>). Note that this can damage
296 your system; see ?safety for details.
298 Some systems like Linux have a filesystem standard which makes a
299 difference between essential libraries and others. Essential
300 libraries are placed in /lib because this directory is required to be
301 located on the same disk partition as /. The /usr subtree might be
302 found on another partition/disk. If you configure for Linux with
303 --prefix=/usr, then this will be done automatically.
305 To install the essential libraries which come with GNU libc in /lib on
306 systems other than Linux one must explicitly request it. Autoconf has
307 no option for this so you have to use a `configparms' file (see the
308 `INSTALL' file for details). It should contain:
313 The first line specifies the directory for the essential libraries,
314 the second line the directory for system configuration files.
316 ??safety How should I avoid damaging my system when I install GNU libc?
318 {ZW} If you wish to be cautious, do not configure with --prefix=/usr.
319 If you don't specify a prefix, glibc will be installed in /usr/local,
320 where it will probably not break anything. (If you wish to be
321 certain, set the prefix to something like /usr/local/glibc2 which is
322 not used for anything.)
324 The dangers when installing glibc in /usr are twofold:
326 * glibc will overwrite the headers in /usr/include. Other C libraries
327 install a different but overlapping set of headers there, so the
328 effect will probably be that you can't compile anything. You need to
329 rename /usr/include out of the way first. (Do not throw it away; you
330 will then lose the ability to compile programs against your old libc.)
332 * None of your old libraries, static or shared, can be used with a
333 different C library major version. For shared libraries this is not a
334 problem, because the filenames are different and the dynamic linker
335 will enforce the restriction. But static libraries have no version
336 information. You have to evacuate all the static libraries in
337 /usr/lib to a safe location.
339 The situation is rather similar to the move from a.out to ELF which
340 long-time Linux users will remember.
342 ?? Do I need to use GNU CC to compile programs that will use the
345 {ZW} In theory, no; the linker does not care, and the headers are
346 supposed to check for GNU CC before using its extensions to the C
349 However, there are currently no ports of glibc to systems where
350 another compiler is the default, so no one has tested the headers
351 extensively against another compiler. You may therefore encounter
352 difficulties. If you do, please report them as bugs.
354 Also, in several places GNU extensions provide large benefits in code
355 quality. For example, the library has hand-optimized, inline assembly
356 versions of some string functions. These can only be used with GCC.
357 See ?string for details.
359 ??crypt When linking with the new libc I get unresolved symbols
360 `crypt' and `setkey'. Why aren't these functions in the
363 {UD} The US places restrictions on exporting cryptographic programs
364 and source code. Until this law gets abolished we cannot ship the
365 cryptographic functions together with glibc.
367 The functions are available, as an add-on (see ?addon). People in the
368 US may get it from the same place they got GNU libc from. People
369 outside the US should get the code from ftp://ftp.ifi.uio.no/pub/gnu,
370 or another archive site outside the USA. The README explains how to
373 If you already have the crypt code on your system the reason for the
374 failure is probably that you did not link with -lcrypt. The crypto
375 functions are in a separate library to make it possible to export GNU
376 libc binaries from the US.
378 ?? When I use GNU libc on my Linux system by linking against
379 the libc.so which comes with glibc all I get is a core dump.
381 {UD} On Linux, gcc sets the dynamic linker to /lib/ld-linux.so.1
382 unless the user specifies a -dynamic-linker argument. This is the
383 name of the libc5 dynamic linker, which does not work with glibc.
385 For casual use of GNU libc you can just specify
386 -dynamic-linker=/lib/ld-linux.so.2
388 which is the glibc dynamic linker, on Linux systems. On other systems
389 the name is /lib/ld.so.1.
391 To change your environment to use GNU libc for compiling you need to
392 change the `specs' file of your gcc. This file is normally found at
394 /usr/lib/gcc-lib/<arch>/<version>/specs
396 In this file you have to change a few things:
398 - change `ld-linux.so.1' to `ld-linux.so.2'
400 - remove all expression `%{...:-lgmon}'; there is no libgmon in glibc
402 - fix a minor bug by changing %{pipe:-} to %|
404 Here is what the gcc-2.7.2 specs file should look like when GNU libc
405 is installed at /usr:
407 -----------------------------------------------------------------------
409 %{V} %{v:%{!V:-V}} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*}
415 %{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__} %{!m386:-D__i486__} %{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}
424 %{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
427 -m elf_i386 %{shared:-shared} %{!shared: %{!ibcs: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} %{static:-static}}}
430 %{!shared: %{pthread:-lpthread} %{profile:-lc_p} %{!profile: -lc}}
436 %{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
438 *switches_need_spaces:
442 %{funsigned-char:-D__CHAR_UNSIGNED__}
445 -D__ELF__ -Dunix -Di386 -Dlinux -Asystem(unix) -Asystem(posix) -Acpu(i386) -Amachine(i386)
453 -----------------------------------------------------------------------
455 Things get a bit more complicated if you have GNU libc installed in
456 some other place than /usr, i.e., if you do not want to use it instead
457 of the old libc. In this case the needed startup files and libraries
458 are not found in the regular places. So the specs file must tell the
459 compiler and linker exactly what to use.
461 Version 2.7.2.3 does and future versions of GCC will automatically
462 provide the correct specs.
464 ?? Looking through the shared libc file I haven't found the
465 functions `stat', `lstat', `fstat', and `mknod' and while
466 linking on my Linux system I get error messages. How is
467 this supposed to work?
469 {RM} Believe it or not, stat and lstat (and fstat, and mknod)
470 are supposed to be undefined references in libc.so.6! Your problem is
471 probably a missing or incorrect /usr/lib/libc.so file; note that this
472 is a small text file now, not a symlink to libc.so.6. It should look
475 GROUP ( libc.so.6 ld.so.1 libc.a )
477 or in ix86/Linux and alpha/Linux:
479 GROUP ( libc.so.6 ld-linux.so.2 libc.a )
481 ?? How can I compile gcc 2.7.2.1 from the gcc source code using
484 {AJ} There's only correct support for glibc 2.0.x in gcc 2.7.2.3
485 or later. You should get at least gcc 2.7.2.3. All previous versions
486 had problems with glibc support.
488 ?? The `gencat' utility cannot process the catalog sources which
489 were used on my Linux libc5 based system. Why?
491 {UD} The `gencat' utility provided with glibc complies to the XPG
492 standard. The older Linux version did not obey the standard, so they
495 To ease the transition from the Linux version some of the non-standard
496 features are also present in the `gencat' program of GNU libc. This
497 mainly includes the use of symbols for the message number and the automatic
498 generation of header files which contain the needed #defines to map the
501 Here is a simple SED script to convert at least some Linux specific
502 catalog files to the XPG4 form:
504 -----------------------------------------------------------------------
505 # Change catalog source in Linux specific format to standard XPG format.
506 # Ulrich Drepper <drepper@cygnus.com>, 1996.
510 s/\$ #\([^ ]*\).*/\1/
512 s/\$ #[^ ]* *\(.*\)/\$ \1/
518 s/\(.*\)\n\(.*\)/\2 \1/
520 -----------------------------------------------------------------------
522 ?? Programs using libc have their messages translated, but other
523 behavior is not localized (e.g. collating order); why?
525 {ZW} Translated messages are automatically installed, but the locale
526 database that controls other behaviors is not. You need to run
527 localedef to install this database, after you have run `make
528 install'. For example, to set up the French Canadian locale, simply
531 localedef -i fr_CA -f ISO-8859-1 fr_CA
533 Please see localedata/README in the source tree for further details.
535 ?? I have set up /etc/nis.conf, and the Linux libc 5 with NYS
536 works great. But the glibc NIS+ doesn't seem to work.
538 {TK} The glibc NIS+ implementation uses a /var/nis/NIS_COLD_START
539 file for storing information about the NIS+ server and their public
540 keys, because the nis.conf file does not contain all the necessary
541 information. You have to copy a NIS_COLD_START file from a Solaris
542 client (the NIS_COLD_START file is byte order independent) or generate
543 it with nisinit from the nis-tools package (available at
544 http://www-vt.uni-paderborn.de/~kukuk/linux/nisplus.html).
546 ?? I have killed ypbind to stop using NIS, but glibc
549 {TK} For faster NIS lookups, glibc uses the /var/yp/binding/ files
550 from ypbind. ypbind 3.3 and older versions don't always remove these
551 files, so glibc will continue to use them. Other BSD versions seem to
552 work correctly. Until ypbind 3.4 is released, you can find a patch at
553 ftp://ftp.kernel.org/pub/linux/utils/net/NIS/ypbind-3.3-glibc2.diff.
555 ?? After installing glibc name resolving doesn't work properly.
557 {AJ} You probably should read the manual section describing
558 nsswitch.conf (just type `info libc "NSS Configuration File"').
559 The NSS configuration file is usually the culprit.
561 ?? I have /usr/include/net and /usr/include/scsi as symlinks
562 into my Linux source tree. Is that wrong?
564 {PB} This was necessary for libc5, but is not correct when using
565 glibc. Including the kernel header files directly in user programs
566 usually does not work (see ?kerhdr). glibc provides its own <net/*>
567 and <scsi/*> header files to replace them, and you may have to remove
568 any symlink that you have in place before you install glibc. However,
569 /usr/include/asm and /usr/include/linux should remain as they were.
571 ?? Programs like `logname', `top', `uptime' `users', `w' and
572 `who', show incorrect information about the (number of)
573 users on my system. Why?
577 ?? After upgrading to glibc 2.1 with symbol versioning I get
578 errors about undefined symbols. What went wrong?
580 {AJ} The problem is caused either by wrong program code or tools. In
581 the versioned libc a lot of symbols are now local that were global
582 symbols in previous versions. It seems that programs linked against
583 older versions often accidentally used libc global variables --
584 something that should not happen.
586 The only way to fix this is to recompile your program. Sorry, that's
587 the price you might have to pay once for quite a number of advantages
588 with symbol versioning.
590 ?? When I start the program XXX after upgrading the library
592 XXX: Symbol `_sys_errlist' has different size in shared
593 object, consider re-linking
594 Why? What should I do?
596 {UD} As the message says, relink the binary. The problem is that
597 a few symbols from the library can change in size and there is no way
598 to avoid this. _sys_errlist is a good example. Occasionally there are
599 new error numbers added to the kernel and this must be reflected at user
600 level, breaking programs that refer to them directly.
602 Such symbols should normally not be used at all. There are mechanisms
603 to avoid using them. In the case of _sys_errlist, there is the
604 strerror() function which should _always_ be used instead. So the
605 correct fix is to rewrite that part of the application.
607 In some situations (especially when testing a new library release) it
608 might be possible that a symbol changed size when that should not have
609 happened. So in case of doubt report such a warning message as a
612 ?? What do I need for C++ development?
614 {HJ,AJ} You need either egcs 1.0.1 or gcc-2.8.0 with libstdc++
615 2.8.0. libg++ 2.7.2 (and the Linux Versions 2.7.2.x) doesn't work very
616 well with the GNU C library due to vtable thunks.
617 If you're upgrading from glibc 2.0.x to 2.1 you have to recompile
618 libstc++ the library compiled for 2.0 is not compatible due to the new
619 Large File Support (LFS) in version 2.1.
621 ? Source and binary incompatibilities, and what to do about them
623 ?? I expect GNU libc to be 100% source code compatible with
624 the old Linux based GNU libc. Why isn't it like this?
626 {DMT,UD} Not every extension in Linux libc's history was well
627 thought-out. In fact it had a lot of problems with standards compliance
628 and with cleanliness. With the introduction of a new version number these
629 errors can now be corrected. Here is a list of the known source code
632 * _GNU_SOURCE: glibc does not make the GNU extensions available
633 automatically. If a program depends on GNU extensions or some
634 other non-standard functionality, it is necessary to compile it
635 with the C compiler option -D_GNU_SOURCE, or better, to put
636 `#define _GNU_SOURCE' at the beginning of your source files, before
637 any C library header files are included. This difference normally
638 manifests itself in the form of missing prototypes and/or data type
639 definitions. Thus, if you get such errors, the first thing you
640 should do is try defining _GNU_SOURCE and see if that makes the
643 For more information consult the file `NOTES' in the GNU C library
646 * reboot(): GNU libc sanitizes the interface of reboot() to be more
647 compatible with the interface used on other OSes. reboot() as
648 implemented in glibc takes just one argument. This argument
649 corresponds to the third argument of the Linux reboot system call.
650 That is, a call of the form reboot(a, b, c) needs to be changed into
651 reboot(c). Beside this the header <sys/reboot.h> defines the needed
652 constants for the argument. These RB_* constants should be used
653 instead of the cryptic magic numbers.
655 * swapon(): the interface of this function didn't change, but the
656 prototype is in a separate header file <sys/swap.h>. This header
657 file also provides the SWAP_* constants defined by <linux/swap.h>;
658 you should use them for the second argument to swapon().
660 * errno: If a program uses the variable "errno", then it _must_
661 include <errno.h>. The old libc often (erroneously) declared this
662 variable implicitly as a side-effect of including other libc header
663 files. glibc is careful to avoid such namespace pollution, which,
664 in turn, means that you really need to include the header files that
665 you depend on. This difference normally manifests itself in the
666 form of the compiler complaining about references to an undeclared
669 * Linux-specific syscalls: All Linux system calls now have appropriate
670 library wrappers and corresponding declarations in various header files.
671 This is because the syscall() macro that was traditionally used to
672 work around missing syscall wrappers are inherently non-portable and
673 error-prone. The following table lists all the new syscall stubs,
674 the header-file declaring their interface and the system call name.
676 syscall name: wrapper name: declaring header file:
677 ------------- ------------- ----------------------
678 bdflush bdflush <sys/kdaemon.h>
679 syslog ksyslog_ctl <sys/klog.h>
681 * lpd: Older versions of lpd depend on a routine called _validuser().
682 The library does not provide this function, but instead provides
683 __ivaliduser() which has a slightly different interface. Simply
684 upgrading to a newer lpd should fix this problem (e.g., the 4.4BSD
685 lpd is known to be working).
687 * resolver functions/BIND: like on many other systems the functions of
688 the resolver library are not included in libc itself. There is a
689 separate library libresolv. If you get undefined symbol errors for
690 symbols starting with `res_*' simply add -lresolv to your linker
693 * the `signal' function's behavior corresponds to the BSD semantic and
694 not the SysV semantic as it was in libc-5. The interface on all GNU
695 systems shall be the same and BSD is the semantic of choice. To use
696 the SysV behavior simply use `sysv_signal', or define _XOPEN_SOURCE.
697 See ?signal for details.
699 ??getlog Why does getlogin() always return NULL on my Linux box?
701 {UD} The GNU C library has a format for the UTMP and WTMP file which
702 differs from what your system currently has. It was extended to
703 fulfill the needs of the next years when IPv6 is introduced. The
704 record size is different and some fields have different positions.
705 The files written by functions from the one library cannot be read by
706 functions from the other library. Sorry, but this is what a major
707 release is for. It's better to have a cut now than having no means to
708 support the new techniques later.
710 {MK} There is however a (partial) solution for this problem. Please
711 take a look at the file `login/README.utmpd'.
713 ?? Where are the DST_* constants found in <sys/time.h> on many
716 {UD} These constants come from the old BSD days and are not used
717 anymore (libc5 does not actually implement the handling although the
718 constants are defined).
720 Instead GNU libc contains zone database support and compatibility code
721 for POSIX TZ environment variable handling.
723 ?? The prototypes for `connect', `accept', `getsockopt',
724 `setsockopt', `getsockname', `getpeername', `send',
725 `sendto', and `recvfrom' are different in GNU libc from
726 any other system I saw. This is a bug, isn't it?
728 {UD} No, this is no bug. This version of GNU libc already follows the
729 new Single Unix specifications (and I think the POSIX.1g draft which
730 adopted the solution). The type for a parameter describing a size is
731 now `socklen_t', a new type.
733 ??kerhdr On Linux I've got problems with the declarations in Linux
736 {UD,AJ} On Linux, the use of kernel headers is reduced to the minimum.
737 This gives Linus the ability to change the headers more freely. Also,
738 user programs are now insulated from changes in the size of kernel
741 For example, the sigset_t type is 32 or 64 bits wide in the kernel.
742 In glibc it is 1024 bits wide. This guarantees that when the kernel
743 gets a bigger sigset_t (for POSIX.1e realtime support, say) user
744 programs will not have to be recompiled. Consult the header files for
745 more information about the changes.
747 Therefore you shouldn't include Linux kernel header files directly if
748 glibc has defined a replacement. Otherwise you might get undefined
749 results because of type conflicts.
751 ?? I don't include any kernel headers myself but the compiler
752 still complains about redeclarations of types in the kernel
755 {UD} The kernel headers before Linux 2.1.61 and 2.0.32 don't work
756 correctly with glibc. Compiling C programs is possible in most cases
757 but C++ programs have (due to the change of the name lookups for
758 `struct's) problems. One prominent example is `struct fd_set'.
760 There might be some problems left but 2.1.61/2.0.32 fix most of the
761 known ones. See the BUGS file for other known problems.
763 ??signal Why don't signals interrupt system calls anymore?
765 {ZW} By default GNU libc uses the BSD semantics for signal(),
766 unlike Linux libc 5 which used System V semantics. This is partially
767 for compatibility with other systems and partially because the BSD
768 semantics tend to make programming with signals easier.
770 There are three differences:
772 * BSD-style signals that occur in the middle of a system call do not
773 affect the system call; System V signals cause the system call to
774 fail and set errno to EINTR.
776 * BSD signal handlers remain installed once triggered. System V signal
777 handlers work only once, so one must reinstall them each time.
779 * A BSD signal is blocked during the execution of its handler. In other
780 words, a handler for SIGCHLD (for example) does not need to worry about
781 being interrupted by another SIGCHLD. It may, however, be interrupted
784 There is general consensus that for `casual' programming with signals, the
785 BSD semantics are preferable. You don't need to worry about system calls
786 returning EINTR, and you don't need to worry about the race conditions
787 associated with one-shot signal handlers.
789 If you are porting an old program that relies on the old semantics, you can
790 quickly fix the problem by changing signal() to sysv_signal() throughout.
791 Alternatively, define _XOPEN_SOURCE before including <signal.h>.
793 For new programs, the sigaction() function allows you to specify precisely
794 how you want your signals to behave. All three differences listed above are
795 individually switchable on a per-signal basis with this function.
797 If all you want is for one specific signal to cause system calls to fail
798 and return EINTR (for example, to implement a timeout) you can do this with
802 ??string I've got errors compiling code that uses certain string
805 {AJ} glibc 2.1 has special string functions that are faster
806 than the normal library functions. Some of the functions are
807 implemented as inline functions and others as macros.
809 The optimized string functions are only used when compiling with
810 optimizations (-O1 or higher). The behavior can be changed with two
813 * __NO_STRING_INLINES: Don't do any string optimizations.
814 * __USE_STRING_INLINES: Use assembly language inline functions (might
815 increase code size dramatically).
817 Since some of these string functions are now additionally defined as
818 macros, code like "char *strncpy();" doesn't work anymore (and is
819 unnecessary, since <string.h> has the necessary declarations). Either
820 change your code or define __NO_STRING_INLINES.
822 {UD} Another problem in this area is that gcc still has problems on
823 machines with very few registers (e.g., ix86). The inline assembler
824 code can require almost all the registers and the register allocator
825 cannot always handle this situation.
827 One can disable the string optimizations selectively. Instead of writing
829 cp = strcpy (foo, "lkj");
833 cp = (strcpy) (foo, "lkj");
835 This disables the optimization for that specific call.
837 ?? I get compiler messages "Initializer element not constant" with
838 stdin/stdout/stderr. Why?
840 {RM,AJ} Constructs like:
841 static FILE *InPtr = stdin;
843 lead to this message. This is correct behaviour with glibc since stdin
844 is not a constant expression. Please note that a strict reading of ISO
845 C does not allow above constructs.
847 One of the advantages of this is that you can assign to stdin, stdout,
848 and stderr just like any other global variable (e.g. `stdout =
849 my_stream;'), which can be very useful with custom streams that you
850 can write with libio (but beware this is not necessarily
851 portable). The reason to implement it this way were versioning
852 problems with the size of the FILE structure.
855 ?? I can't compile with gcc -traditional (or
856 -traditional-cpp). Why?
858 {AJ} glibc2 does break -traditional and -traditonal-cpp - and will continue
859 to do so. For example constructs of the form:
863 are useful for debugging purpuses (you can use foo with your debugger
864 that's why we need the enum) and for compatibility (other systems use
865 defines and check with #ifdef).
867 ?? I get some errors with `gcc -ansi'. Isn't glibc ANSI compatible?
869 {AJ} The GNU C library is compatible with the ANSI/ISO C standard. If
870 you're using `gcc -ansi', the glibc includes which are specified in
871 the standard follow the standard. The ANSI/ISO C standard defines what
872 has to be in the include files - and also states that nothing else
873 should be in the include files (btw. you can still enable additional
874 standards with feature flags).
876 The GNU C library is conforming to ANSI/ISO C - if and only if you're
877 only using the headers and library functions defined in the standard.
881 ?? After I changed configure.in I get `Autoconf version X.Y.
882 or higher is required for this script'. What can I do?
884 {UD} You have to get the specified autoconf version (or a later one)
885 from your favorite mirror of ftp.gnu.org.
887 ?? When I try to compile code which uses IPv6 headers and
888 definitions on my Linux 2.x.y system I am in trouble.
889 Nothing seems to work.
891 {UD} The problem is that IPv6 development still has not reached a
892 point where the headers are stable. There are still lots of
893 incompatible changes made and the libc headers have to follow.
895 Also, make sure you have a suitably recent kernel. As of the 970401
896 snapshot, according to Philip Blundell <Philip.Blundell@pobox.com>, the
897 required kernel version is at least 2.1.30.
900 Answers were given by:
901 {UD} Ulrich Drepper, <drepper@cygnus.com>
902 {DMT} David Mosberger-Tang, <davidm@AZStarNet.com>
903 {RM} Roland McGrath, <roland@gnu.org>
904 {AJ} Andreas Jaeger, <aj@arthur.rhein-neckar.de>
905 {EY} Eric Youngdale, <eric@andante.jic.com>
906 {PB} Phil Blundell, <Philip.Blundell@pobox.com>
907 {MK} Mark Kettenis, <kettenis@phys.uva.nl>
908 {ZW} Zack Weinberg, <zack@rabi.phys.columbia.edu>
909 {TK} Thorsten Kukuk, <kukuk@vt.uni-paderborn.de>
910 {GK} Geoffrey Keating, <Geoff.Keating@anu.edu.au>
911 {HJ} H.J. Lu, <hjl@gnu.org>
git://sourceware.org / glibc.git / blob