]>
Commit | Line | Data |
---|---|---|
1 | # work around flakey gcc warnings | |
2 | %{!?with_Werror: %global with_Werror 0} | |
3 | %{!?with_sqlite: %global with_sqlite 0%{?fedora} >= 17 || 0%{?rhel} >= 7} | |
4 | # prefer prebuilt docs | |
5 | %{!?with_docs: %global with_docs 0} | |
6 | %{!?with_htmldocs: %global with_htmldocs 0} | |
7 | %{!?with_monitor: %global with_monitor 1} | |
8 | # crash is not available | |
9 | %ifarch ppc ppc64 %{sparc} %{mips} %{riscv} | |
10 | %{!?with_crash: %global with_crash 0} | |
11 | %else | |
12 | %{!?with_crash: %global with_crash 1} | |
13 | %endif | |
14 | %{!?with_rpm: %global with_rpm 1} | |
15 | %{!?elfutils_version: %global elfutils_version 0.179} | |
16 | %{!?with_boost: %global with_boost 0} | |
17 | %ifarch %{ix86} x86_64 ppc ppc64 ppc64le aarch64 | |
18 | %{!?with_dyninst: %global with_dyninst 0%{?fedora} >= 18 || 0%{?rhel} >= 7} | |
19 | %else | |
20 | %{!?with_dyninst: %global with_dyninst 0} | |
21 | %endif | |
22 | %{!?with_bpf: %global with_bpf 0%{?fedora} >= 22 || 0%{?rhel} >= 8} | |
23 | %{!?with_systemd: %global with_systemd 0%{?fedora} >= 19 || 0%{?rhel} >= 7} | |
24 | %{!?with_emacsvim: %global with_emacsvim 0%{?fedora} >= 19 || 0%{?rhel} >= 7} | |
25 | %ifarch %{ix86} | |
26 | %{!?with_java: %global with_java 0} | |
27 | %else | |
28 | %{!?with_java: %global with_java 0%{?fedora} >= 19 || 0%{?rhel} >= 7} | |
29 | %endif | |
30 | %{!?with_debuginfod: %global with_debuginfod 0%{?fedora} >= 25 || 0%{?rhel} >= 7} | |
31 | %{!?with_virthost: %global with_virthost 0%{?fedora} >= 19 || 0%{?rhel} >= 7} | |
32 | %{!?with_virtguest: %global with_virtguest 1} | |
33 | %{!?with_dracut: %global with_dracut 0%{?fedora} >= 19 || 0%{?rhel} >= 6} | |
34 | %ifarch x86_64 | |
35 | %{!?with_mokutil: %global with_mokutil 0%{?fedora} >= 18 || 0%{?rhel} >= 7} | |
36 | %{!?with_openssl: %global with_openssl 0%{?fedora} >= 18 || 0%{?rhel} >= 7} | |
37 | %else | |
38 | %{!?with_mokutil: %global with_mokutil 0} | |
39 | %{!?with_openssl: %global with_openssl 0} | |
40 | %endif | |
41 | %{!?with_pyparsing: %global with_pyparsing 0%{?fedora} >= 18 || 0%{?rhel} >= 7} | |
42 | %{!?with_python3: %global with_python3 0%{?fedora} >= 23 || 0%{?rhel} > 7} | |
43 | %{!?with_python2_probes: %global with_python2_probes (0%{?fedora} <= 28 && 0%{?rhel} <= 7)} | |
44 | %{!?with_python3_probes: %global with_python3_probes (0%{?fedora} >= 23 || 0%{?rhel} > 7)} | |
45 | %{!?with_httpd: %global with_httpd 0} | |
46 | %{!?with_specific_python: %global with_specific_python 0%{?fedora} >= 31} | |
47 | %{!?with_sysusers: %global with_sysusers 0%{?fedora} >= 32 || 0%{?rhel} >= 9} | |
48 | ||
49 | # Virt is supported on these arches, even on el7, but it's not in core EL7 | |
50 | %if 0%{?rhel} && 0%{?rhel} <= 7 | |
51 | %ifarch ppc64le aarch64 | |
52 | %global with_virthost 0 | |
53 | %endif | |
54 | %endif | |
55 | ||
56 | %if 0%{?fedora} >= 18 || 0%{?rhel} >= 6 | |
57 | %define initdir %{_initddir} | |
58 | %else | |
59 | # RHEL5 doesn't know _initddir | |
60 | %define initdir %{_initrddir} | |
61 | %endif | |
62 | ||
63 | %if %{with_virtguest} | |
64 | %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7 | |
65 | %define udevrulesdir /usr/lib/udev/rules.d | |
66 | %else | |
67 | %if 0%{?rhel} >= 6 | |
68 | %define udevrulesdir /lib/udev/rules.d | |
69 | %endif | |
70 | %endif | |
71 | %endif | |
72 | ||
73 | %if 0%{?fedora} >= 19 || 0%{?rhel} >= 7 | |
74 | %define dracutstap %{_prefix}/lib/dracut/modules.d/99stap | |
75 | %else | |
76 | %define dracutstap %{_prefix}/share/dracut/modules.d/99stap | |
77 | %endif | |
78 | ||
79 | %if 0%{?rhel} == 6 || 0%{?rhel} == 7 | |
80 | %define dracutbindir /sbin | |
81 | %else | |
82 | %define dracutbindir %{_bindir} | |
83 | %endif | |
84 | ||
85 | %{!?_rpmmacrodir: %define _rpmmacrodir %{_rpmconfigdir}/macros.d} | |
86 | ||
87 | # To avoid testsuite/*/*.stp has shebang which doesn't start with '/' | |
88 | %define __brp_mangle_shebangs_exclude_from .stp$ | |
89 | ||
90 | %define _systemtap_runtime_preinstall \ | |
91 | # See systemd-sysusers(8) sysusers.d(5)\ | |
92 | \ | |
93 | g stapusr 156\ | |
94 | g stapsys 157\ | |
95 | g stapdev 158\ | |
96 | g stapunpriv 159\ | |
97 | u stapunpriv 159 "systemtap unprivileged user" /var/lib/stapunpriv /sbin/nologin\ | |
98 | m stapunpriv stapunpriv | |
99 | ||
100 | %define _systemtap_server_preinstall \ | |
101 | # See systemd-sysusers(8) sysusers.d(5)\ | |
102 | \ | |
103 | g stap-server -\ | |
104 | u stap-server - "systemtap compiler server" /var/lib/stap-server /sbin/nologin\ | |
105 | m stap-server stap-server | |
106 | ||
107 | ||
108 | %define _systemtap_testsuite_preinstall \ | |
109 | # See systemd-sysusers(8) sysusers.d(5)\ | |
110 | \ | |
111 | u stapusr - "systemtap testsuite user" / /sbin/nologin\ | |
112 | u stapsys - "systemtap testsuite user" / /sbin/nologin\ | |
113 | u stapdev - "systemtap testsuite user" / /sbin/nologin\ | |
114 | m stapusr stapusr\ | |
115 | m stapsys stapusr\ | |
116 | m stapsys stapsys\ | |
117 | m stapdev stapusr\ | |
118 | m stapdev stapdev | |
119 | ||
120 | ||
121 | Name: systemtap | |
122 | # PRERELEASE | |
123 | Version: 5.2 | |
124 | Release: 1%{?release_override}%{?dist} | |
125 | # for version, see also configure.ac | |
126 | ||
127 | ||
128 | # Packaging abstract: | |
129 | # | |
130 | # systemtap empty req:-client req:-devel | |
131 | # systemtap-server /usr/bin/stap-server*, req:-devel | |
132 | # systemtap-devel /usr/bin/stap, runtime, tapset, req:kernel-devel | |
133 | # systemtap-runtime /usr/bin/staprun, /usr/bin/stapsh, /usr/bin/stapdyn | |
134 | # systemtap-client /usr/bin/stap, samples, docs, tapset(bonus), req:-runtime | |
135 | # systemtap-initscript /etc/init.d/systemtap, dracut module, req:systemtap | |
136 | # systemtap-sdt-devel /usr/include/sys/sdt.h | |
137 | # systemtap-sdt-dtrace /usr/bin/dtrace | |
138 | # systemtap-testsuite /usr/share/systemtap/testsuite*, req:systemtap, req:sdt-devel | |
139 | # systemtap-runtime-java libHelperSDT.so, HelperSDT.jar, stapbm, req:-runtime | |
140 | # systemtap-runtime-virthost /usr/bin/stapvirt, req:libvirt req:libxml2 | |
141 | # systemtap-runtime-virtguest udev rules, init scripts/systemd service, req:-runtime | |
142 | # systemtap-runtime-python2 HelperSDT python2 module, req:-runtime | |
143 | # systemtap-runtime-python3 HelperSDT python3 module, req:-runtime | |
144 | # systemtap-jupyter /usr/bin/stap-jupyter-* interactive-notebook req:systemtap | |
145 | # | |
146 | # Typical scenarios: | |
147 | # | |
148 | # stap-client: systemtap-client | |
149 | # stap-server: systemtap-server | |
150 | # local user: systemtap | |
151 | # | |
152 | # Unusual scenarios: | |
153 | # | |
154 | # intermediary stap-client for --remote: systemtap-client (-runtime unused) | |
155 | # intermediary stap-server for --use-server: systemtap-server (-devel unused) | |
156 | ||
157 | Summary: Programmable system-wide instrumentation system | |
158 | License: GPL-2.0-or-later | |
159 | URL: https://sourceware.org/systemtap/ | |
160 | Source: ftp://sourceware.org/pub/systemtap/releases/systemtap-%{version}.tar.gz | |
161 | ||
162 | # Build* | |
163 | BuildRequires: make | |
164 | BuildRequires: gcc-c++ | |
165 | BuildRequires: cpio | |
166 | BuildRequires: gettext-devel | |
167 | BuildRequires: pkgconfig(nss) | |
168 | BuildRequires: pkgconfig(avahi-client) | |
169 | %if %{with_debuginfod} | |
170 | BuildRequires: pkgconfig(libdebuginfod) | |
171 | BuildRequires: pkgconfig(json-c) | |
172 | %endif | |
173 | %if %{with_dyninst} | |
174 | BuildRequires: dyninst-devel >= 10.0 | |
175 | BuildRequires: pkgconfig(libselinux) | |
176 | %endif | |
177 | %if %{with_sqlite} | |
178 | BuildRequires: sqlite-devel > 3.7 | |
179 | %endif | |
180 | %if %{with_monitor} | |
181 | BuildRequires: pkgconfig(json-c) | |
182 | BuildRequires: pkgconfig(ncurses) | |
183 | %endif | |
184 | %if %{with_systemd} | |
185 | BuildRequires: systemd | |
186 | %endif | |
187 | # Needed for libstd++ < 4.0, without <tr1/memory> | |
188 | %if %{with_boost} | |
189 | BuildRequires: boost-devel | |
190 | %endif | |
191 | %if %{with_crash} | |
192 | BuildRequires: crash-devel zlib-devel | |
193 | %endif | |
194 | %if %{with_rpm} | |
195 | BuildRequires: rpm-devel | |
196 | %endif | |
197 | BuildRequires: elfutils-devel >= %{elfutils_version} | |
198 | %if %{with_docs} | |
199 | BuildRequires: /usr/bin/latex /usr/bin/dvips /usr/bin/ps2pdf | |
200 | %if 0%{?fedora} >= 18 || 0%{?rhel} >= 7 | |
201 | BuildRequires: tex(fullpage.sty) tex(fancybox.sty) tex(bchr7t.tfm) tex(graphicx.sty) | |
202 | %endif | |
203 | %if %{with_htmldocs} | |
204 | # On F10, xmlto's pdf support was broken off into a sub-package, | |
205 | # called 'xmlto-tex'. To avoid a specific F10 BuildReq, we'll do a | |
206 | # file-based buildreq on '/usr/share/xmlto/format/fo/pdf'. | |
207 | BuildRequires: xmlto /usr/share/xmlto/format/fo/pdf | |
208 | %endif | |
209 | %endif | |
210 | %if %{with_emacsvim} | |
211 | # for _emacs_sitelispdir macros etc. | |
212 | BuildRequires: emacs | |
213 | %endif | |
214 | %if %{with_java} | |
215 | BuildRequires: java-devel | |
216 | %endif | |
217 | %if %{with_virthost} | |
218 | # BuildRequires: libvirt-devel >= 1.0.2 | |
219 | BuildRequires: pkgconfig(libvirt) | |
220 | BuildRequires: pkgconfig(libxml-2.0) | |
221 | %endif | |
222 | BuildRequires: readline-devel | |
223 | %if %{with_python2_probes} | |
224 | BuildRequires: python2-devel | |
225 | %if 0%{?fedora} >= 1 | |
226 | BuildRequires: python2-setuptools | |
227 | %else | |
228 | BuildRequires: python-setuptools | |
229 | %endif | |
230 | %endif | |
231 | %if %{with_python3} | |
232 | BuildRequires: python3 | |
233 | %endif | |
234 | %if %{with_python3_probes} | |
235 | BuildRequires: python3-devel | |
236 | BuildRequires: python3-setuptools | |
237 | %endif | |
238 | ||
239 | %if %{with_httpd} | |
240 | BuildRequires: libmicrohttpd-devel | |
241 | BuildRequires: libuuid-devel | |
242 | %endif | |
243 | %if %{with_sysusers} | |
244 | BuildRequires: systemd-rpm-macros | |
245 | %endif | |
246 | ||
247 | ||
248 | # Install requirements | |
249 | Requires: systemtap-client = %{version}-%{release} | |
250 | Requires: systemtap-devel = %{version}-%{release} | |
251 | ||
252 | %description | |
253 | SystemTap is an instrumentation system for systems running Linux. | |
254 | Developers can write instrumentation scripts to collect data on | |
255 | the operation of the system. The base systemtap package contains/requires | |
256 | the components needed to locally develop and execute systemtap scripts. | |
257 | ||
258 | # ------------------------------------------------------------------------ | |
259 | ||
260 | %package server | |
261 | Summary: Instrumentation System Server | |
262 | License: GPL-2.0-or-later | |
263 | URL: https://sourceware.org/systemtap/ | |
264 | Requires: systemtap-devel = %{version}-%{release} | |
265 | Conflicts: systemtap-devel < %{version}-%{release} | |
266 | Conflicts: systemtap-runtime < %{version}-%{release} | |
267 | Conflicts: systemtap-client < %{version}-%{release} | |
268 | Requires: nss coreutils | |
269 | Requires: zip unzip | |
270 | Requires(pre): shadow-utils | |
271 | BuildRequires: nss-devel avahi-devel | |
272 | %if %{with_openssl} | |
273 | Requires: openssl | |
274 | %endif | |
275 | %if %{with_systemd} | |
276 | Requires: systemd | |
277 | %else | |
278 | Requires(post): chkconfig | |
279 | Requires(preun): chkconfig | |
280 | Requires(preun): initscripts | |
281 | Requires(postun): initscripts | |
282 | %endif | |
283 | ||
284 | %description server | |
285 | This is the remote script compilation server component of systemtap. | |
286 | It announces itself to nearby clients with avahi (if available), and | |
287 | compiles systemtap scripts to kernel objects on their demand. | |
288 | ||
289 | ||
290 | %package devel | |
291 | Summary: Programmable system-wide instrumentation system - development headers, tools | |
292 | License: GPL-2.0-or-later AND GPL-2.0-only AND BSD-3-Clause AND LGPL-2.1-only AND BSD-2-Clause | |
293 | URL: https://sourceware.org/systemtap/ | |
294 | ||
295 | %if 0%{?rhel} >= 8 || 0%{?fedora} >= 20 | |
296 | Recommends: (kernel-debug-devel if kernel-debug) | |
297 | Recommends: (kernel-devel if kernel) | |
298 | %else | |
299 | Requires: kernel-devel-uname-r | |
300 | %endif | |
301 | ||
302 | Requires: gcc make | |
303 | # for compiling --runtime=dyninst sripts, need elfutils headers, bz1930973 | |
304 | Requires: elfutils-devel >= %{elfutils_version} | |
305 | ||
306 | Conflicts: systemtap-client < %{version}-%{release} | |
307 | Conflicts: systemtap-server < %{version}-%{release} | |
308 | Conflicts: systemtap-runtime < %{version}-%{release} | |
309 | # Suggest: kernel-debuginfo | |
310 | ||
311 | %description devel | |
312 | This package contains the components needed to compile a systemtap | |
313 | script from source form into executable (.ko) forms. It may be | |
314 | installed on a self-contained developer workstation (along with the | |
315 | systemtap-client and systemtap-runtime packages), or on a dedicated | |
316 | remote server (alongside the systemtap-server package). It includes | |
317 | a copy of the standard tapset library and the runtime library C files. | |
318 | ||
319 | ||
320 | %package runtime | |
321 | Summary: Programmable system-wide instrumentation system - runtime | |
322 | License: GPL-2.0-or-later | |
323 | URL: https://sourceware.org/systemtap/ | |
324 | Requires(pre): shadow-utils | |
325 | Conflicts: systemtap-devel < %{version}-%{release} | |
326 | Conflicts: systemtap-server < %{version}-%{release} | |
327 | Conflicts: systemtap-client < %{version}-%{release} | |
328 | ||
329 | %description runtime | |
330 | SystemTap runtime contains the components needed to execute | |
331 | a systemtap script that was already compiled into a module | |
332 | using a local or remote systemtap-devel installation. | |
333 | ||
334 | ||
335 | %package client | |
336 | Summary: Programmable system-wide instrumentation system - client | |
337 | License: GPL-2.0-or-later AND GPL-2.0-only AND BSD-3-Clause AND LGPL-2.1-only AND GFDL-1.2-or-later AND BSD-2-Clause | |
338 | URL: https://sourceware.org/systemtap/ | |
339 | Requires: zip unzip | |
340 | Requires: systemtap-runtime = %{version}-%{release} | |
341 | Requires: coreutils grep sed unzip zip | |
342 | Requires: openssh-clients | |
343 | Conflicts: systemtap-devel < %{version}-%{release} | |
344 | Conflicts: systemtap-server < %{version}-%{release} | |
345 | Conflicts: systemtap-runtime < %{version}-%{release} | |
346 | %if %{with_mokutil} | |
347 | Requires: mokutil | |
348 | %endif | |
349 | ||
350 | %description client | |
351 | This package contains/requires only the components needed to | |
352 | use systemtap scripts by compiling them using a local or a remote | |
353 | systemtap-server service, then run them using a local or | |
354 | remote systemtap-runtime. It includes script samples and | |
355 | documentation, and a copy of the tapset library for reference. | |
356 | It does NOT include all the components for running a systemtap | |
357 | script in a self-contained fashion; for that, use the -devel | |
358 | subpackage instead. | |
359 | ||
360 | %package initscript | |
361 | Summary: Systemtap Initscripts | |
362 | License: GPL-2.0-or-later | |
363 | URL: https://sourceware.org/systemtap/ | |
364 | Requires: systemtap = %{version}-%{release} | |
365 | %if %{with_systemd} | |
366 | Requires: systemd | |
367 | %else | |
368 | Requires(post): chkconfig | |
369 | Requires(preun): chkconfig | |
370 | Requires(preun): initscripts | |
371 | Requires(postun): initscripts | |
372 | %endif | |
373 | ||
374 | %description initscript | |
375 | This package includes a SysVinit script to launch selected systemtap | |
376 | scripts at system startup, along with a dracut module for early | |
377 | boot-time probing if supported. | |
378 | ||
379 | ||
380 | %package sdt-devel | |
381 | Summary: Static probe support header files | |
382 | License: GPL-2.0-or-later AND CC0-1.0 | |
383 | URL: https://sourceware.org/systemtap/ | |
384 | ||
385 | %description sdt-devel | |
386 | This package includes the <sys/sdt.h> header file used for static | |
387 | instrumentation compiled into userspace programs. | |
388 | ||
389 | ||
390 | %package sdt-dtrace | |
391 | Summary: Static probe support dtrace tool | |
392 | License: GPL-2.0-or-later AND CC0-1.0 | |
393 | URL: https://sourceware.org/systemtap/ | |
394 | Provides: dtrace = %{version}-%{release} | |
395 | %if %{with_pyparsing} | |
396 | %if %{with_python3} | |
397 | Requires: python3-pyparsing | |
398 | %else | |
399 | %if 0%{?rhel} >= 7 | |
400 | Requires: pyparsing | |
401 | %else | |
402 | Requires: python2-pyparsing | |
403 | %endif | |
404 | %endif | |
405 | %endif | |
406 | ||
407 | %description sdt-dtrace | |
408 | This package includes the dtrace-compatibility preprocessor | |
409 | to process related .d files into tracing-macro-laden .h headers. | |
410 | ||
411 | ||
412 | %package testsuite | |
413 | Summary: Instrumentation System Testsuite | |
414 | License: GPL-2.0-or-later AND GPL-2.0-only AND GPL-3.0-or-later AND MIT | |
415 | URL: https://sourceware.org/systemtap/ | |
416 | Requires: systemtap = %{version}-%{release} | |
417 | Requires: systemtap-sdt-devel = %{version}-%{release} | |
418 | Requires: systemtap-server = %{version}-%{release} | |
419 | Requires: dejagnu which elfutils grep nc wget | |
420 | %if %{with_debuginfod} | |
421 | Requires: elfutils-debuginfod | |
422 | %endif | |
423 | # work around fedora ci gating kvetching about i686<->x86-64 conflicts | |
424 | %ifarch x86_64 | |
425 | Conflicts: systemtap-testsuite = %{version}-%{release}.i686 | |
426 | %endif | |
427 | %ifarch i686 | |
428 | Conflicts: systemtap-testsuite = %{version}-%{release}.x86_64 | |
429 | %endif | |
430 | Requires: gcc gcc-c++ make glibc-devel | |
431 | # testsuite/systemtap.base/ptrace.exp needs strace | |
432 | Requires: strace | |
433 | # testsuite/systemtap.base/ipaddr.exp needs nc. Unfortunately, the rpm | |
434 | # that provides nc has changed over time (from 'nc' to | |
435 | # 'nmap-ncat'). So, we'll do a file-based require. | |
436 | Requires: /usr/bin/nc | |
437 | %ifnarch ia64 ppc64le aarch64 | |
438 | %if 0%{?fedora} >= 21 || 0%{?rhel} >= 8 | |
439 | # no prelink | |
440 | %else | |
441 | Requires: prelink | |
442 | %endif | |
443 | %endif | |
444 | # testsuite/systemtap.server/client.exp needs avahi | |
445 | Requires: avahi | |
446 | %if %{with_crash} | |
447 | # testsuite/systemtap.base/crash.exp needs crash | |
448 | Requires: crash | |
449 | %endif | |
450 | %if %{with_java} | |
451 | Requires: systemtap-runtime-java = %{version}-%{release} | |
452 | %endif | |
453 | %if %{with_python2_probes} | |
454 | Requires: systemtap-runtime-python2 = %{version}-%{release} | |
455 | %endif | |
456 | %if %{with_python3_probes} | |
457 | Requires: systemtap-runtime-python3 = %{version}-%{release} | |
458 | %endif | |
459 | %ifarch x86_64 | |
460 | %if 0%{?rhel} >= 8 || 0%{?fedora} >= 20 | |
461 | # fweimer, personal correspondence | |
462 | Recommends: glibc-devel(x86-32) | |
463 | %else | |
464 | Requires: /usr/lib/libc.so | |
465 | %endif | |
466 | # ... and /usr/lib/libgcc_s.so.* | |
467 | # ... and /usr/lib/libstdc++.so.* | |
468 | %endif | |
469 | %if 0%{?fedora} >= 18 | |
470 | Requires: stress | |
471 | %endif | |
472 | # The following "meta" files for the systemtap examples run "perf": | |
473 | # testsuite/systemtap.examples/hw_watch_addr.meta | |
474 | # testsuite/systemtap.examples/memory/hw_watch_sym.meta | |
475 | Requires: perf | |
476 | ||
477 | %description testsuite | |
478 | This package includes the dejagnu-based systemtap stress self-testing | |
479 | suite. This may be used by system administrators to thoroughly check | |
480 | systemtap on the current system. | |
481 | ||
482 | ||
483 | %if %{with_java} | |
484 | %package runtime-java | |
485 | Summary: Systemtap Java Runtime Support | |
486 | License: GPL-2.0-or-later | |
487 | URL: https://sourceware.org/systemtap/ | |
488 | Requires: systemtap-runtime = %{version}-%{release} | |
489 | # work around fedora ci gating kvetching about i686<->x86-64 conflicts | |
490 | %ifarch x86_64 | |
491 | Conflicts: systemtap-runtime = %{version}-%{release}.i686 | |
492 | %endif | |
493 | %ifarch i686 | |
494 | Conflicts: systemtap-runtime = %{version}-%{release}.x86_64 | |
495 | %endif | |
496 | Requires: byteman > 2.0 | |
497 | Requires: iproute | |
498 | Requires: java-devel | |
499 | ||
500 | %description runtime-java | |
501 | This package includes support files needed to run systemtap scripts | |
502 | that probe Java processes running on the OpenJDK runtimes using Byteman. | |
503 | %endif | |
504 | ||
505 | %if %{with_python2_probes} | |
506 | %package runtime-python2 | |
507 | Summary: Systemtap Python 2 Runtime Support | |
508 | License: GPL-2.0-or-later | |
509 | URL: https://sourceware.org/systemtap/ | |
510 | Requires: systemtap-runtime = %{version}-%{release} | |
511 | ||
512 | %description runtime-python2 | |
513 | This package includes support files needed to run systemtap scripts | |
514 | that probe python 2 processes. | |
515 | %endif | |
516 | ||
517 | %if %{with_python3_probes} | |
518 | %package runtime-python3 | |
519 | Summary: Systemtap Python 3 Runtime Support | |
520 | License: GPL-2.0-or-later | |
521 | URL: https://sourceware.org/systemtap/ | |
522 | Requires: systemtap-runtime = %{version}-%{release} | |
523 | ||
524 | %if ! (%{with_python2_probes}) | |
525 | # Provide an clean upgrade path when the python2 package is removed | |
526 | Obsoletes: %{name}-runtime-python2 < %{version}-%{release} | |
527 | %endif | |
528 | ||
529 | %description runtime-python3 | |
530 | This package includes support files needed to run systemtap scripts | |
531 | that probe python 3 processes. | |
532 | %endif | |
533 | ||
534 | %if %{with_python3_probes} | |
535 | %package exporter | |
536 | Summary: Systemtap-prometheus interoperation mechanism | |
537 | License: GPL-2.0-or-later | |
538 | URL: https://sourceware.org/systemtap/ | |
539 | Requires: systemtap-runtime = %{version}-%{release} | |
540 | ||
541 | %description exporter | |
542 | This package includes files for a systemd service that manages | |
543 | systemtap sessions and relays prometheus metrics from the sessions | |
544 | to remote requesters on demand. | |
545 | %endif | |
546 | ||
547 | %if %{with_virthost} | |
548 | %package runtime-virthost | |
549 | Summary: Systemtap Cross-VM Instrumentation - host | |
550 | License: GPL-2.0-or-later | |
551 | URL: https://sourceware.org/systemtap/ | |
552 | # only require libvirt-libs really | |
553 | #Requires: libvirt >= 1.0.2 | |
554 | Requires: libxml2 | |
555 | ||
556 | %description runtime-virthost | |
557 | This package includes the components required to run systemtap scripts | |
558 | inside a libvirt-managed domain from the host without using a network | |
559 | connection. | |
560 | %endif | |
561 | ||
562 | %if %{with_virtguest} | |
563 | %package runtime-virtguest | |
564 | Summary: Systemtap Cross-VM Instrumentation - guest | |
565 | License: GPL-2.0-or-later | |
566 | URL: https://sourceware.org/systemtap/ | |
567 | Requires: systemtap-runtime = %{version}-%{release} | |
568 | %if %{with_systemd} | |
569 | Requires(post): findutils coreutils | |
570 | Requires(preun): grep coreutils | |
571 | Requires(postun): grep coreutils | |
572 | %else | |
573 | Requires(post): chkconfig initscripts | |
574 | Requires(preun): chkconfig initscripts | |
575 | Requires(postun): initscripts | |
576 | %endif | |
577 | ||
578 | %description runtime-virtguest | |
579 | This package installs the services necessary on a virtual machine for a | |
580 | systemtap-runtime-virthost machine to execute systemtap scripts. | |
581 | %endif | |
582 | ||
583 | %package jupyter | |
584 | Summary: ISystemtap jupyter kernel and examples | |
585 | License: GPL-2.0-or-later | |
586 | URL: https://sourceware.org/systemtap/ | |
587 | Requires: systemtap = %{version}-%{release} | |
588 | ||
589 | %description jupyter | |
590 | This package includes files needed to build and run | |
591 | the interactive systemtap Jupyter kernel, either locally | |
592 | or within a container. | |
593 | ||
594 | # ------------------------------------------------------------------------ | |
595 | ||
596 | %prep | |
597 | %setup -q | |
598 | ||
599 | %build | |
600 | ||
601 | # Enable/disable the dyninst pure-userspace backend | |
602 | %if %{with_dyninst} | |
603 | %global dyninst_config --with-dyninst | |
604 | %else | |
605 | %global dyninst_config --without-dyninst | |
606 | %endif | |
607 | ||
608 | # Enable/disable the dyninst pure-userspace backend | |
609 | %if %{with_Werror} | |
610 | %global Werror_config --enable-Werror | |
611 | %else | |
612 | %global Werror_config --disable-Werror | |
613 | %endif | |
614 | ||
615 | # Enable/disable the sqlite coverage testing support | |
616 | %if %{with_sqlite} | |
617 | %global sqlite_config --enable-sqlite | |
618 | %else | |
619 | %global sqlite_config --disable-sqlite | |
620 | %endif | |
621 | ||
622 | %if %{with_debuginfod} | |
623 | %global debuginfod_config --with-debuginfod | |
624 | %else | |
625 | %global debuginfod_config --without-debuginfod | |
626 | %endif | |
627 | ||
628 | ||
629 | # Enable/disable the crash extension | |
630 | %if %{with_crash} | |
631 | %global crash_config --enable-crash | |
632 | %else | |
633 | %global crash_config --disable-crash | |
634 | %endif | |
635 | ||
636 | # Enable/disable the code to find and suggest needed rpms | |
637 | %if %{with_rpm} | |
638 | %global rpm_config --with-rpm | |
639 | %else | |
640 | %global rpm_config --without-rpm | |
641 | %endif | |
642 | ||
643 | %if %{with_docs} | |
644 | %if %{with_htmldocs} | |
645 | %global docs_config --enable-docs --enable-htmldocs | |
646 | %else | |
647 | %global docs_config --enable-docs --disable-htmldocs | |
648 | %endif | |
649 | %else | |
650 | %global docs_config --enable-docs=prebuilt | |
651 | %endif | |
652 | ||
653 | %if %{with_java} | |
654 | %global java_config --with-java=%{_jvmdir}/java | |
655 | %else | |
656 | %global java_config --without-java | |
657 | %endif | |
658 | ||
659 | %if %{with_python3} | |
660 | %global python3_config --with-python3 | |
661 | %else | |
662 | %global python3_config --without-python3 | |
663 | %endif | |
664 | %if %{with_python2_probes} | |
665 | %global python2_probes_config --with-python2-probes | |
666 | %else | |
667 | %global python2_probes_config --without-python2-probes | |
668 | %endif | |
669 | %if %{with_python3_probes} | |
670 | %global python3_probes_config --with-python3-probes | |
671 | %else | |
672 | %global python3_probes_config --without-python3-probes | |
673 | %endif | |
674 | ||
675 | %if %{with_virthost} | |
676 | %global virt_config --enable-virt | |
677 | %else | |
678 | %global virt_config --disable-virt | |
679 | %endif | |
680 | ||
681 | %if %{with_dracut} | |
682 | %global dracut_config --with-dracutstap=%{dracutstap} --with-dracutbindir=%{dracutbindir} | |
683 | %else | |
684 | %global dracut_config %{nil} | |
685 | %endif | |
686 | ||
687 | %if %{with_httpd} | |
688 | %global httpd_config --enable-httpd | |
689 | %else | |
690 | %global httpd_config --disable-httpd | |
691 | %endif | |
692 | ||
693 | %if %{with_bpf} | |
694 | %global bpf_config --with-bpf | |
695 | %else | |
696 | %global bpf_config --without-bpf | |
697 | %endif | |
698 | ||
699 | # We don't ship compileworthy python code, just oddball samples | |
700 | %global py_auto_byte_compile 0 | |
701 | ||
702 | %configure %{Werror_config} %{dyninst_config} %{sqlite_config} %{crash_config} %{docs_config} %{rpm_config} %{java_config} %{virt_config} %{dracut_config} %{python3_config} %{python2_probes_config} %{python3_probes_config} %{httpd_config} %{bpf_config} %{debuginfod_config} --disable-silent-rules --with-extra-version="rpm %{version}-%{release}" | |
703 | make %{?_smp_mflags} V=1 | |
704 | ||
705 | ||
706 | %install | |
707 | make DESTDIR=$RPM_BUILD_ROOT install | |
708 | ||
709 | %if ! (%{with_python3}) | |
710 | rm -v $RPM_BUILD_ROOT%{_bindir}/stap-profile-annotate | |
711 | %endif | |
712 | ||
713 | %find_lang %{name} | |
714 | for dir in $(ls -1d $RPM_BUILD_ROOT%{_mandir}/{??,??_??}) ; do | |
715 | dir=$(echo $dir | sed -e "s|^$RPM_BUILD_ROOT||") | |
716 | lang=$(basename $dir) | |
717 | echo "%%lang($lang) $dir/man*/*" >> %{name}.lang | |
718 | done | |
719 | ||
720 | %if %{with_sysusers} | |
721 | mkdir -p %{buildroot}%{_sysusersdir} | |
722 | echo '%_systemtap_runtime_preinstall' > %{buildroot}%{_sysusersdir}/systemtap-runtime.conf | |
723 | echo '%_systemtap_server_preinstall' > %{buildroot}%{_sysusersdir}/systemtap-server.conf | |
724 | echo '%_systemtap_testsuite_preinstall' > %{buildroot}%{_sysusersdir}/systemtap-testsuite.conf | |
725 | %endif | |
726 | ||
727 | ||
728 | ln -s %{_datadir}/systemtap/examples | |
729 | ||
730 | # Fix paths in the example scripts. | |
731 | find $RPM_BUILD_ROOT%{_datadir}/systemtap/examples -type f -name '*.stp' -print0 | xargs -0 sed -i -r -e '1s@^#!.+stap@#!%{_bindir}/stap@' | |
732 | ||
733 | # To make rpmlint happy, remove any .gitignore files in the testsuite. | |
734 | find testsuite -type f -name '.gitignore' -print0 | xargs -0 rm -f | |
735 | ||
736 | # Because "make install" may install staprun with whatever mode, the | |
737 | # post-processing programs rpmbuild runs won't be able to read it. | |
738 | # So, we change permissions so that they can read it. We'll set the | |
739 | # permissions back to 04110 in the %files section below. | |
740 | chmod 755 $RPM_BUILD_ROOT%{_bindir}/staprun | |
741 | ||
742 | # Copy over the testsuite | |
743 | cp -rp testsuite $RPM_BUILD_ROOT%{_datadir}/systemtap | |
744 | ||
745 | # We want the manuals in the special doc dir, not the generic doc install dir. | |
746 | # We build it in place and then move it away so it doesn't get installed | |
747 | # twice. rpm can specify itself where the (versioned) docs go with the | |
748 | # %doc directive. | |
749 | mkdir docs.installed | |
750 | mv $RPM_BUILD_ROOT%{_datadir}/doc/systemtap/*.pdf docs.installed/ | |
751 | %if %{with_docs} | |
752 | %if %{with_htmldocs} | |
753 | mv $RPM_BUILD_ROOT%{_datadir}/doc/systemtap/tapsets docs.installed/ | |
754 | mv $RPM_BUILD_ROOT%{_datadir}/doc/systemtap/SystemTap_Beginners_Guide docs.installed/ | |
755 | %endif | |
756 | %endif | |
757 | ||
758 | install -D -m 644 macros.systemtap $RPM_BUILD_ROOT%{_rpmmacrodir}/macros.systemtap | |
759 | ||
760 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/stap-server | |
761 | mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/lib/stap-server | |
762 | mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/lib/stap-server/.systemtap | |
763 | mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log/stap-server | |
764 | touch $RPM_BUILD_ROOT%{_localstatedir}/log/stap-server/log | |
765 | mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/cache/systemtap | |
766 | mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/run/systemtap | |
767 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d | |
768 | install -m 644 initscript/logrotate.stap-server $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/stap-server | |
769 | ||
770 | # If using systemd systemtap.service file, retain the old init script in %{_libexecdir} as a helper. | |
771 | %if %{with_systemd} | |
772 | mkdir -p $RPM_BUILD_ROOT%{_unitdir} | |
773 | touch $RPM_BUILD_ROOT%{_unitdir}/systemtap.service | |
774 | # RHBZ2070857 | |
775 | mkdir -p $RPM_BUILD_ROOT%{_presetdir} | |
776 | echo 'enable systemtap.service' > $RPM_BUILD_ROOT%{_presetdir}/42-systemtap.preset | |
777 | install -m 644 initscript/systemtap.service $RPM_BUILD_ROOT%{_unitdir}/systemtap.service | |
778 | mkdir -p $RPM_BUILD_ROOT%{_sbindir} | |
779 | install -m 755 initscript/systemtap $RPM_BUILD_ROOT%{_sbindir}/systemtap-service | |
780 | %else | |
781 | mkdir -p $RPM_BUILD_ROOT%{initdir} | |
782 | install -m 755 initscript/systemtap $RPM_BUILD_ROOT%{initdir} | |
783 | mkdir -p $RPM_BUILD_ROOT%{_sbindir} | |
784 | ln -sf %{initdir}/systemtap $RPM_BUILD_ROOT%{_sbindir}/systemtap-service | |
785 | # TODO CHECK CORRECTNESS: symlink %{_sbindir}/systemtap-service to %{initdir}/systemtap | |
786 | %endif | |
787 | ||
788 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/systemtap | |
789 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/systemtap/conf.d | |
790 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/systemtap/script.d | |
791 | install -m 644 initscript/config.systemtap $RPM_BUILD_ROOT%{_sysconfdir}/systemtap/config | |
792 | ||
793 | %if %{with_systemd} | |
794 | mkdir -p $RPM_BUILD_ROOT%{_unitdir} | |
795 | touch $RPM_BUILD_ROOT%{_unitdir}/stap-server.service | |
796 | install -m 644 stap-server.service $RPM_BUILD_ROOT%{_unitdir}/stap-server.service | |
797 | mkdir -p $RPM_BUILD_ROOT%{_tmpfilesdir} | |
798 | install -m 644 stap-server.conf $RPM_BUILD_ROOT%{_tmpfilesdir}/stap-server.conf | |
799 | %else | |
800 | install -m 755 initscript/stap-server $RPM_BUILD_ROOT%{initdir} | |
801 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/stap-server/conf.d | |
802 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig | |
803 | install -m 644 initscript/config.stap-server $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/stap-server | |
804 | %endif | |
805 | ||
806 | %if %{with_emacsvim} | |
807 | mkdir -p $RPM_BUILD_ROOT%{_emacs_sitelispdir} | |
808 | install -p -m 644 emacs/systemtap-mode.el* $RPM_BUILD_ROOT%{_emacs_sitelispdir} | |
809 | mkdir -p $RPM_BUILD_ROOT%{_emacs_sitestartdir} | |
810 | install -p -m 644 emacs/systemtap-init.el $RPM_BUILD_ROOT%{_emacs_sitestartdir}/systemtap-init.el | |
811 | for subdir in ftdetect ftplugin indent syntax | |
812 | do | |
813 | mkdir -p $RPM_BUILD_ROOT%{_datadir}/vim/vimfiles/$subdir | |
814 | install -p -m 644 vim/$subdir/*.vim $RPM_BUILD_ROOT%{_datadir}/vim/vimfiles/$subdir | |
815 | done | |
816 | %endif | |
817 | ||
818 | %if %{with_virtguest} | |
819 | mkdir -p $RPM_BUILD_ROOT%{udevrulesdir} | |
820 | %if %{with_systemd} | |
821 | install -p -m 644 staprun/guest/99-stapsh.rules $RPM_BUILD_ROOT%{udevrulesdir} | |
822 | mkdir -p $RPM_BUILD_ROOT%{_unitdir} | |
823 | install -p -m 644 staprun/guest/stapsh@.service $RPM_BUILD_ROOT%{_unitdir} | |
824 | %else | |
825 | install -p -m 644 staprun/guest/99-stapsh-init.rules $RPM_BUILD_ROOT%{udevrulesdir} | |
826 | install -p -m 755 staprun/guest/stapshd $RPM_BUILD_ROOT%{initdir} | |
827 | mkdir -p $RPM_BUILD_ROOT%{_libexecdir}/systemtap | |
828 | install -p -m 755 staprun/guest/stapsh-daemon $RPM_BUILD_ROOT%{_libexecdir}/systemtap | |
829 | mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules | |
830 | # Technically, this is only needed for RHEL5, in which the MODULE_ALIAS is missing, but | |
831 | # it does no harm in RHEL6 as well | |
832 | install -p -m 755 staprun/guest/virtio_console.modules $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/modules | |
833 | %endif | |
834 | %endif | |
835 | ||
836 | %if %{with_dracut} | |
837 | mkdir -p $RPM_BUILD_ROOT%{dracutstap} | |
838 | install -p -m 755 initscript/99stap/module-setup.sh $RPM_BUILD_ROOT%{dracutstap} | |
839 | install -p -m 755 initscript/99stap/install $RPM_BUILD_ROOT%{dracutstap} | |
840 | install -p -m 755 initscript/99stap/check $RPM_BUILD_ROOT%{dracutstap} | |
841 | install -p -m 755 initscript/99stap/start-staprun.sh $RPM_BUILD_ROOT%{dracutstap} | |
842 | touch $RPM_BUILD_ROOT%{dracutstap}/params.conf | |
843 | %endif | |
844 | ||
845 | %if %{with_specific_python} | |
846 | # Some files got ambiguous python shebangs, we fix them after everything else is done | |
847 | %py3_shebang_fix %{buildroot}%{python3_sitearch} %{buildroot}%{_bindir}/* | |
848 | %endif | |
849 | ||
850 | %pre runtime | |
851 | %if %{with_sysusers} | |
852 | echo '%_systemtap_runtime_preinstall' | systemd-sysusers --replace=%{_sysusersdir}/systemtap-runtime.conf - | |
853 | %else | |
854 | getent group stapusr >/dev/null || groupadd -f -g 156 -r stapusr | |
855 | getent group stapsys >/dev/null || groupadd -f -g 157 -r stapsys | |
856 | getent group stapdev >/dev/null || groupadd -f -g 158 -r stapdev | |
857 | getent passwd stapunpriv >/dev/null || \ | |
858 | useradd -c "Systemtap Unprivileged User" -u 159 -g stapunpriv -d %{_localstatedir}/lib/stapunpriv -r -s /sbin/nologin stapunpriv 2>/dev/null || \ | |
859 | useradd -c "Systemtap Unprivileged User" -g stapunpriv -d %{_localstatedir}/lib/stapunpriv -r -s /sbin/nologin stapunpriv | |
860 | %endif | |
861 | exit 0 | |
862 | ||
863 | %pre server | |
864 | %if %{with_sysusers} | |
865 | echo '%_systemtap_server_preinstall' | systemd-sysusers --replace=%{_sysusersdir}/systemtap-server.conf - | |
866 | %else | |
867 | getent group stap-server >/dev/null || groupadd -f -g 155 -r stap-server | |
868 | getent passwd stap-server >/dev/null || \ | |
869 | useradd -c "Systemtap Compile Server" -u 155 -g stap-server -d %{_localstatedir}/lib/stap-server -r -s /sbin/nologin stap-server 2>/dev/null || \ | |
870 | useradd -c "Systemtap Compile Server" -g stap-server -d %{_localstatedir}/lib/stap-server -r -s /sbin/nologin stap-server | |
871 | %endif | |
872 | exit 0 | |
873 | ||
874 | %pre testsuite | |
875 | %if %{with_sysusers} | |
876 | echo '%_systemtap_testsuite_preinstall' | systemd-sysusers --replace=%{_sysusersdir}/systemtap-testsuite.conf - | |
877 | %else | |
878 | getent passwd stapusr >/dev/null || \ | |
879 | useradd -c "Systemtap 'stapusr' User" -g stapusr -r -s /sbin/nologin stapusr | |
880 | getent passwd stapsys >/dev/null || \ | |
881 | useradd -c "Systemtap 'stapsys' User" -g stapsys -G stapusr -r -s /sbin/nologin stapsys | |
882 | getent passwd stapdev >/dev/null || \ | |
883 | useradd -c "Systemtap 'stapdev' User" -g stapdev -G stapusr -r -s /sbin/nologin stapdev | |
884 | %endif | |
885 | exit 0 | |
886 | ||
887 | %post server | |
888 | ||
889 | # We have some duplication between the %files listings for the | |
890 | # ~stap-server directories and the explicit mkdir/chown/chmod bits | |
891 | # here. Part of the reason may be that a preexisting stap-server | |
892 | # account may well be placed somewhere other than | |
893 | # %{_localstatedir}/lib/stap-server, but we'd like their permissions | |
894 | # set similarly. | |
895 | ||
896 | test -e ~stap-server && chmod 750 ~stap-server | |
897 | ||
898 | if [ ! -f ~stap-server/.systemtap/rc ]; then | |
899 | mkdir -p ~stap-server/.systemtap | |
900 | chown stap-server:stap-server ~stap-server/.systemtap | |
901 | # PR16276: guess at a reasonable number for a default --rlimit-nproc | |
902 | numcpu=`/usr/bin/getconf _NPROCESSORS_ONLN` | |
903 | if [ -z "$numcpu" -o "$numcpu" -lt 1 ]; then numcpu=1; fi | |
904 | nproc=`expr $numcpu \* 30` | |
905 | # PR29661 -> 4G | |
906 | echo "--rlimit-as=4294967296 --rlimit-cpu=60 --rlimit-nproc=$nproc --rlimit-stack=1024000 --rlimit-fsize=51200000" > ~stap-server/.systemtap/rc | |
907 | chown stap-server:stap-server ~stap-server/.systemtap/rc | |
908 | fi | |
909 | ||
910 | test -e %{_localstatedir}/log/stap-server/log || { | |
911 | touch %{_localstatedir}/log/stap-server/log | |
912 | chmod 644 %{_localstatedir}/log/stap-server/log | |
913 | chown stap-server:stap-server %{_localstatedir}/log/stap-server/log | |
914 | } | |
915 | # Prepare the service | |
916 | %if %{with_systemd} | |
917 | # Note, Fedora policy doesn't allow network services enabled by default | |
918 | # /bin/systemctl enable stap-server.service >/dev/null 2>&1 || : | |
919 | /bin/systemd-tmpfiles --create %{_tmpfilesdir}/stap-server.conf >/dev/null 2>&1 || : | |
920 | %else | |
921 | /sbin/chkconfig --add stap-server | |
922 | %endif | |
923 | exit 0 | |
924 | ||
925 | %triggerin client -- systemtap-server | |
926 | if test -e ~stap-server/.systemtap/ssl/server/stap.cert; then | |
927 | # echo Authorizing ssl-peer/trusted-signer certificate for local systemtap-server | |
928 | %{_libexecdir}/systemtap/stap-authorize-cert ~stap-server/.systemtap/ssl/server/stap.cert %{_sysconfdir}/systemtap/ssl/client >/dev/null | |
929 | %{_libexecdir}/systemtap/stap-authorize-cert ~stap-server/.systemtap/ssl/server/stap.cert %{_sysconfdir}/systemtap/staprun >/dev/null | |
930 | fi | |
931 | exit 0 | |
932 | # XXX: corresponding %triggerun? | |
933 | ||
934 | %preun server | |
935 | # Check that this is the actual deinstallation of the package, as opposed to | |
936 | # just removing the old package on upgrade. | |
937 | if [ $1 = 0 ] ; then | |
938 | %if %{with_systemd} | |
939 | /bin/systemctl --no-reload disable stap-server.service >/dev/null 2>&1 || : | |
940 | /bin/systemctl stop stap-server.service >/dev/null 2>&1 || : | |
941 | %else | |
942 | /sbin/service stap-server stop >/dev/null 2>&1 | |
943 | /sbin/chkconfig --del stap-server | |
944 | %endif | |
945 | fi | |
946 | exit 0 | |
947 | ||
948 | %postun server | |
949 | # Check whether this is an upgrade of the package. | |
950 | # If so, restart the service if it's running | |
951 | if [ "$1" -ge "1" ] ; then | |
952 | %if %{with_systemd} | |
953 | /bin/systemctl condrestart stap-server.service >/dev/null 2>&1 || : | |
954 | %else | |
955 | /sbin/service stap-server condrestart >/dev/null 2>&1 || : | |
956 | %endif | |
957 | fi | |
958 | exit 0 | |
959 | ||
960 | %post initscript | |
961 | %if %{with_systemd} | |
962 | # RHBZ2070857 - use systemd presets instead | |
963 | # /bin/systemctl enable systemtap.service >/dev/null 2>&1 || : | |
964 | %else | |
965 | /sbin/chkconfig --add systemtap | |
966 | %endif | |
967 | exit 0 | |
968 | ||
969 | %preun initscript | |
970 | # Check that this is the actual deinstallation of the package, as opposed to | |
971 | # just removing the old package on upgrade. | |
972 | if [ $1 = 0 ] ; then | |
973 | %if %{with_systemd} | |
974 | /bin/systemctl --no-reload disable systemtap.service >/dev/null 2>&1 || : | |
975 | /bin/systemctl stop systemtap.service >/dev/null 2>&1 || : | |
976 | %else | |
977 | /sbin/service systemtap stop >/dev/null 2>&1 | |
978 | /sbin/chkconfig --del systemtap | |
979 | %endif | |
980 | fi | |
981 | exit 0 | |
982 | ||
983 | %postun initscript | |
984 | # Check whether this is an upgrade of the package. | |
985 | # If so, restart the service if it's running | |
986 | if [ "$1" -ge "1" ] ; then | |
987 | %if %{with_systemd} | |
988 | /bin/systemctl condrestart systemtap.service >/dev/null 2>&1 || : | |
989 | %else | |
990 | /sbin/service systemtap condrestart >/dev/null 2>&1 || : | |
991 | %endif | |
992 | fi | |
993 | exit 0 | |
994 | ||
995 | %post runtime-virtguest | |
996 | %if %{with_systemd} | |
997 | # Start services if there are ports present | |
998 | if [ -d /dev/virtio-ports ]; then | |
999 | (find /dev/virtio-ports -iname 'org.systemtap.stapsh.[0-9]*' -type l \ | |
1000 | | xargs -n 1 basename \ | |
1001 | | xargs -n 1 -I {} /bin/systemctl start stapsh@{}.service) >/dev/null 2>&1 || : | |
1002 | fi | |
1003 | %else | |
1004 | /sbin/chkconfig --add stapshd | |
1005 | /sbin/chkconfig stapshd on | |
1006 | /sbin/service stapshd start >/dev/null 2>&1 || : | |
1007 | %endif | |
1008 | exit 0 | |
1009 | ||
1010 | %preun runtime-virtguest | |
1011 | # Stop service if this is an uninstall rather than an upgrade | |
1012 | if [ $1 = 0 ]; then | |
1013 | %if %{with_systemd} | |
1014 | # We need to stop all stapsh services. Because they are instantiated from | |
1015 | # a template service file, we can't simply call disable. We need to find | |
1016 | # all the running ones and stop them all individually | |
1017 | for service in `/bin/systemctl --full | grep stapsh@ | cut -d ' ' -f 1`; do | |
1018 | /bin/systemctl stop $service >/dev/null 2>&1 || : | |
1019 | done | |
1020 | %else | |
1021 | /sbin/service stapshd stop >/dev/null 2>&1 | |
1022 | /sbin/chkconfig --del stapshd | |
1023 | %endif | |
1024 | fi | |
1025 | exit 0 | |
1026 | ||
1027 | %postun runtime-virtguest | |
1028 | # Restart service if this is an upgrade rather than an uninstall | |
1029 | if [ "$1" -ge "1" ]; then | |
1030 | %if %{with_systemd} | |
1031 | # We need to restart all stapsh services. Because they are instantiated from | |
1032 | # a template service file, we can't simply call restart. We need to find | |
1033 | # all the running ones and restart them all individually | |
1034 | for service in `/bin/systemctl --full | grep stapsh@ | cut -d ' ' -f 1`; do | |
1035 | /bin/systemctl condrestart $service >/dev/null 2>&1 || : | |
1036 | done | |
1037 | %else | |
1038 | /sbin/service stapshd condrestart >/dev/null 2>&1 | |
1039 | %endif | |
1040 | fi | |
1041 | exit 0 | |
1042 | ||
1043 | %if %{with_python3_probes} | |
1044 | %if %{with_systemd} | |
1045 | %preun exporter | |
1046 | if [ $1 = 0 ] ; then | |
1047 | /bin/systemctl stop stap-exporter.service >/dev/null 2>&1 || : | |
1048 | /bin/systemctl disable stap-exporter.service >/dev/null 2>&1 || : | |
1049 | fi | |
1050 | exit 0 | |
1051 | ||
1052 | %postun exporter | |
1053 | # Restart service if this is an upgrade rather than an uninstall | |
1054 | if [ "$1" -ge "1" ]; then | |
1055 | /bin/systemctl condrestart stap-exporter >/dev/null 2>&1 || : | |
1056 | fi | |
1057 | exit 0 | |
1058 | %endif | |
1059 | %endif | |
1060 | ||
1061 | %post | |
1062 | # Remove any previously-built uprobes.ko materials | |
1063 | (make -C %{_datadir}/systemtap/runtime/uprobes clean) >/dev/null 2>&1 || true | |
1064 | (/sbin/rmmod uprobes) >/dev/null 2>&1 || true | |
1065 | ||
1066 | %preun | |
1067 | # Ditto | |
1068 | (make -C %{_datadir}/systemtap/runtime/uprobes clean) >/dev/null 2>&1 || true | |
1069 | (/sbin/rmmod uprobes) >/dev/null 2>&1 || true | |
1070 | ||
1071 | # ------------------------------------------------------------------------ | |
1072 | ||
1073 | %files | |
1074 | # The main "systemtap" rpm doesn't include any files. | |
1075 | ||
1076 | %files server -f systemtap.lang | |
1077 | %{_bindir}/stap-server | |
1078 | %dir %{_libexecdir}/systemtap | |
1079 | %{_libexecdir}/systemtap/stap-serverd | |
1080 | %{_libexecdir}/systemtap/stap-start-server | |
1081 | %{_libexecdir}/systemtap/stap-stop-server | |
1082 | %{_libexecdir}/systemtap/stap-gen-cert | |
1083 | %{_libexecdir}/systemtap/stap-sign-module | |
1084 | %{_libexecdir}/systemtap/stap-authorize-cert | |
1085 | %{_libexecdir}/systemtap/stap-env | |
1086 | %{_mandir}/man7/error* | |
1087 | %{_mandir}/man7/stappaths.7* | |
1088 | %{_mandir}/man7/warning* | |
1089 | %{_mandir}/man8/stap-server.8* | |
1090 | %if %{with_systemd} | |
1091 | %{_unitdir}/stap-server.service | |
1092 | %{_tmpfilesdir}/stap-server.conf | |
1093 | %else | |
1094 | %{initdir}/stap-server | |
1095 | %dir %{_sysconfdir}/stap-server/conf.d | |
1096 | %config(noreplace) %{_sysconfdir}/sysconfig/stap-server | |
1097 | %endif | |
1098 | %config(noreplace) %{_sysconfdir}/logrotate.d/stap-server | |
1099 | %dir %{_sysconfdir}/stap-server | |
1100 | %dir %attr(0750,stap-server,stap-server) %{_localstatedir}/lib/stap-server | |
1101 | %dir %attr(0700,stap-server,stap-server) %{_localstatedir}/lib/stap-server/.systemtap | |
1102 | %dir %attr(0755,stap-server,stap-server) %{_localstatedir}/log/stap-server | |
1103 | %ghost %config(noreplace) %attr(0644,stap-server,stap-server) %{_localstatedir}/log/stap-server/log | |
1104 | %ghost %attr(0755,stap-server,stap-server) %{_localstatedir}/run/stap-server | |
1105 | %doc README README.unprivileged AUTHORS NEWS | |
1106 | %{!?_licensedir:%global license %%doc} | |
1107 | %license COPYING | |
1108 | %if %{with_sysusers} | |
1109 | %{_sysusersdir}/systemtap-server.conf | |
1110 | %endif | |
1111 | ||
1112 | ||
1113 | %files devel -f systemtap.lang | |
1114 | %{_bindir}/stap | |
1115 | %{_bindir}/stap-prep | |
1116 | %if %{with_python3} | |
1117 | %{_bindir}/stap-profile-annotate | |
1118 | %endif | |
1119 | %{_bindir}/stap-report | |
1120 | %dir %{_datadir}/systemtap | |
1121 | %{_datadir}/systemtap/runtime | |
1122 | %{_datadir}/systemtap/tapset | |
1123 | %{_mandir}/man1/stap.1* | |
1124 | %{_mandir}/man1/stap-prep.1* | |
1125 | %{_mandir}/man1/stap-report.1* | |
1126 | %{_mandir}/man7/error* | |
1127 | %{_mandir}/man7/stappaths.7* | |
1128 | %{_mandir}/man7/warning* | |
1129 | %doc README README.unprivileged AUTHORS NEWS | |
1130 | %{!?_licensedir:%global license %%doc} | |
1131 | %license COPYING | |
1132 | %if %{with_java} | |
1133 | %dir %{_libexecdir}/systemtap | |
1134 | %{_libexecdir}/systemtap/libHelperSDT.so | |
1135 | %endif | |
1136 | %if %{with_emacsvim} | |
1137 | %{_emacs_sitelispdir}/*.el* | |
1138 | %{_emacs_sitestartdir}/systemtap-init.el | |
1139 | %{_datadir}/vim/vimfiles | |
1140 | %endif | |
1141 | # Notice that the stap-resolve-module-function.py file is used by | |
1142 | # *both* the python2 and python3 subrpms. Both subrpms use that same | |
1143 | # python script to help list python probes. | |
1144 | %if %{with_python3_probes} || %{with_python2_probes} | |
1145 | %{_libexecdir}/systemtap/python/stap-resolve-module-function.py | |
1146 | %dir %{_libexecdir}/systemtap/python | |
1147 | %exclude %{_libexecdir}/systemtap/python/stap-resolve-module-function.py? | |
1148 | %endif | |
1149 | ||
1150 | ||
1151 | %files runtime -f systemtap.lang | |
1152 | %attr(4110,root,stapusr) %{_bindir}/staprun | |
1153 | %{_bindir}/stapsh | |
1154 | %{_bindir}/stap-merge | |
1155 | %{_bindir}/stap-report | |
1156 | %if %{with_dyninst} | |
1157 | %{_bindir}/stapdyn | |
1158 | %endif | |
1159 | %if %{with_bpf} | |
1160 | %{_bindir}/stapbpf | |
1161 | %endif | |
1162 | %dir %{_libexecdir}/systemtap | |
1163 | %{_libexecdir}/systemtap/stapio | |
1164 | %{_libexecdir}/systemtap/stap-authorize-cert | |
1165 | %if %{with_crash} | |
1166 | %dir %{_libdir}/systemtap | |
1167 | %{_libdir}/systemtap/staplog.so* | |
1168 | %endif | |
1169 | %{_mandir}/man1/stap-report.1* | |
1170 | %{_mandir}/man7/error* | |
1171 | %{_mandir}/man7/stappaths.7* | |
1172 | %{_mandir}/man7/warning* | |
1173 | %{_mandir}/man8/stapsh.8* | |
1174 | %{_mandir}/man8/staprun.8* | |
1175 | %if %{with_dyninst} | |
1176 | %{_mandir}/man8/stapdyn.8* | |
1177 | %endif | |
1178 | %if %{with_bpf} | |
1179 | %{_mandir}/man8/stapbpf.8* | |
1180 | %endif | |
1181 | %doc README README.security AUTHORS NEWS | |
1182 | %{!?_licensedir:%global license %%doc} | |
1183 | %license COPYING | |
1184 | %if %{with_sysusers} | |
1185 | %{_sysusersdir}/systemtap-runtime.conf | |
1186 | %endif | |
1187 | ||
1188 | ||
1189 | %files client -f systemtap.lang | |
1190 | %doc README README.unprivileged AUTHORS NEWS | |
1191 | %{_datadir}/systemtap/examples | |
1192 | %{!?_licensedir:%global license %%doc} | |
1193 | %license COPYING | |
1194 | %doc docs.installed/*.pdf | |
1195 | %if %{with_docs} | |
1196 | %if %{with_htmldocs} | |
1197 | %doc docs.installed/tapsets/*.html | |
1198 | %doc docs.installed/SystemTap_Beginners_Guide | |
1199 | %endif | |
1200 | %endif | |
1201 | %{_bindir}/stap | |
1202 | %{_bindir}/stap-prep | |
1203 | %{_bindir}/stap-report | |
1204 | %{_mandir}/man1/stap.1* | |
1205 | %{_mandir}/man1/stap-prep.1* | |
1206 | %{_mandir}/man1/stap-merge.1* | |
1207 | %{_mandir}/man1/stap-report.1* | |
1208 | %{_mandir}/man1/stapref.1* | |
1209 | %{_mandir}/man3/* | |
1210 | %{_mandir}/man7/error* | |
1211 | %{_mandir}/man7/stappaths.7* | |
1212 | %{_mandir}/man7/warning* | |
1213 | %dir %{_datadir}/systemtap | |
1214 | %{_datadir}/systemtap/tapset | |
1215 | ||
1216 | ||
1217 | ||
1218 | %files initscript | |
1219 | %if %{with_systemd} | |
1220 | %{_presetdir}/42-systemtap.preset | |
1221 | %{_unitdir}/systemtap.service | |
1222 | %{_sbindir}/systemtap-service | |
1223 | %else | |
1224 | %{initdir}/systemtap | |
1225 | %{_sbindir}/systemtap-service | |
1226 | %endif | |
1227 | %dir %{_sysconfdir}/systemtap | |
1228 | %dir %{_sysconfdir}/systemtap/conf.d | |
1229 | %dir %{_sysconfdir}/systemtap/script.d | |
1230 | %config(noreplace) %{_sysconfdir}/systemtap/config | |
1231 | %dir %{_localstatedir}/cache/systemtap | |
1232 | %ghost %{_localstatedir}/run/systemtap | |
1233 | %{_mandir}/man8/systemtap-service.8* | |
1234 | %if %{with_dracut} | |
1235 | %dir %{dracutstap} | |
1236 | %{dracutstap}/* | |
1237 | %endif | |
1238 | ||
1239 | ||
1240 | %files sdt-devel | |
1241 | %{_includedir}/sys/sdt.h | |
1242 | %{_includedir}/sys/sdt-config.h | |
1243 | %{_rpmmacrodir}/macros.systemtap | |
1244 | %doc README AUTHORS NEWS | |
1245 | %{!?_licensedir:%global license %%doc} | |
1246 | %license COPYING | |
1247 | ||
1248 | ||
1249 | %files sdt-dtrace | |
1250 | %{_bindir}/dtrace | |
1251 | %doc README AUTHORS NEWS | |
1252 | %{!?_licensedir:%global license %%doc} | |
1253 | %license COPYING | |
1254 | %{_mandir}/man1/dtrace.1* | |
1255 | ||
1256 | ||
1257 | %files testsuite | |
1258 | %dir %{_datadir}/systemtap | |
1259 | %{_datadir}/systemtap/testsuite | |
1260 | %if %{with_sysusers} | |
1261 | %{_sysusersdir}/systemtap-testsuite.conf | |
1262 | %endif | |
1263 | ||
1264 | ||
1265 | %if %{with_java} | |
1266 | %files runtime-java | |
1267 | %dir %{_libexecdir}/systemtap | |
1268 | %{_libexecdir}/systemtap/libHelperSDT.so | |
1269 | %{_libexecdir}/systemtap/HelperSDT.jar | |
1270 | %{_libexecdir}/systemtap/stapbm | |
1271 | %endif | |
1272 | ||
1273 | %if %{with_python2_probes} | |
1274 | %files runtime-python2 | |
1275 | %{python_sitearch}/HelperSDT | |
1276 | %{python_sitearch}/HelperSDT-*.egg-info | |
1277 | %endif | |
1278 | %if %{with_python3_probes} | |
1279 | %files runtime-python3 | |
1280 | %{python3_sitearch}/HelperSDT | |
1281 | %{python3_sitearch}/HelperSDT-*.egg-info | |
1282 | %endif | |
1283 | ||
1284 | %if %{with_virthost} | |
1285 | %files runtime-virthost | |
1286 | %{_mandir}/man1/stapvirt.1* | |
1287 | %{_bindir}/stapvirt | |
1288 | %endif | |
1289 | ||
1290 | %if %{with_virtguest} | |
1291 | %files runtime-virtguest | |
1292 | %if %{with_systemd} | |
1293 | %{udevrulesdir}/99-stapsh.rules | |
1294 | %{_unitdir}/stapsh@.service | |
1295 | %else | |
1296 | %{udevrulesdir}/99-stapsh-init.rules | |
1297 | %dir %{_libexecdir}/systemtap | |
1298 | %{_libexecdir}/systemtap/stapsh-daemon | |
1299 | %{initdir}/stapshd | |
1300 | %{_sysconfdir}/sysconfig/modules/virtio_console.modules | |
1301 | %endif | |
1302 | %endif | |
1303 | ||
1304 | %if %{with_python3_probes} | |
1305 | %files exporter | |
1306 | %{_sysconfdir}/stap-exporter | |
1307 | %{_sysconfdir}/sysconfig/stap-exporter | |
1308 | %{_unitdir}/stap-exporter.service | |
1309 | %{_mandir}/man8/stap-exporter.8* | |
1310 | %{_sbindir}/stap-exporter | |
1311 | %endif | |
1312 | ||
1313 | %files jupyter | |
1314 | %{_bindir}/stap-jupyter-container | |
1315 | %{_bindir}/stap-jupyter-install | |
1316 | %{_mandir}/man1/stap-jupyter.1* | |
1317 | %dir %{_datadir}/systemtap | |
1318 | %{_datadir}/systemtap/interactive-notebook | |
1319 | ||
1320 | # ------------------------------------------------------------------------ | |
1321 | ||
1322 | # Future new-release entries should be of the form | |
1323 | # * DDD MMM DD YYYY YOURNAME <YOUREMAIL> - V-R | |
1324 | # - Upstream release, see wiki page below for detailed notes. | |
1325 | # https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1326 | ||
1327 | # PRERELEASE | |
1328 | %changelog | |
1329 | * Thu Aug 08 2024 LumÃr Balhar <lbalhar@redhat.com> - 5.2-pre | |
1330 | - Final split of sdt-dtrace and sdt-devel (rhbz#2296275) | |
1331 | https://fedoraproject.org/wiki/Changes/Separate_dtrace_package | |
1332 | ||
1333 | * Fri Apr 26 2024 Frank Ch. Eigler <fche@redhat.com> - 5.1-1 | |
1334 | - Upstream release, see wiki page below for detailed notes. | |
1335 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1336 | ||
1337 | * Sat Nov 04 2023 Frank Ch. Eigler <fche@redhat.com> - 5.0-1 | |
1338 | - Upstream release, see wiki page below for detailed notes. | |
1339 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1340 | - migrated to SPDX license | |
1341 | ||
1342 | * Fri Apr 28 2023 Frank Ch. Eigler <fche@redhat.com> - 4.9-1 | |
1343 | - Upstream release, see wiki page below for detailed notes. | |
1344 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1345 | ||
1346 | * Thu Nov 03 2022 Serhei Makarov <serhei@serhei.io> - 4.8-1 | |
1347 | - Upstream release, see wiki page below for detailed notes. | |
1348 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1349 | ||
1350 | * Mon May 02 2022 Frank Ch. Eigler <fche@redhat.com> - 4.7-1 | |
1351 | - Upstream release, see wiki page below for detailed notes. | |
1352 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1353 | ||
1354 | * Mon Nov 15 2021 Serhei Makarov <me@serhei.io> - 4.6-1 | |
1355 | - Upstream release, see wiki page below for detailed notes. | |
1356 | https://sourceware.org/systemtap/wiki/SystemTapReleases | |
1357 | ||
1358 | * Fri May 07 2021 Serhei Makarov <me@serhei.io> - 4.5-1 | |
1359 | - Upstream release. | |
1360 | ||
1361 | * Mon Nov 09 2020 Frank Ch. Eigler <fche@redhat.com> - 4.4-1 | |
1362 | - Upstream release. | |
1363 | ||
1364 | * Thu Jun 11 2020 Frank Ch. Eigler <fche@redhat.com> - 4.3-1 | |
1365 | - Upstream release. | |
1366 | ||
1367 | * Mon Nov 18 2019 Sagar Patel <sapatel@redhat.com> - 4.2-1 | |
1368 | - Upstream release. | |
1369 | ||
1370 | * Tue May 07 2019 Serguei Makarov <smakarov@redhat.com> - 4.1-1 | |
1371 | - Upstream release. | |
1372 | ||
1373 | * Sat Oct 13 2018 Frank Ch. Eigler <fche@redhat.com> - 4.0-1 | |
1374 | - Upstream release. | |
1375 | ||
1376 | * Thu Jun 07 2018 Frank Ch. Eigler <fche@redhat.com> - 3.3-1 | |
1377 | - Upstream release. | |
1378 | ||
1379 | * Wed Oct 18 2017 Frank Ch. Eigler <fche@redhat.com> - 3.2-1 | |
1380 | - Upstream release. | |
1381 | ||
1382 | * Fri Feb 17 2017 Frank Ch. Eigler <fche@redhat.com> - 3.1-1 | |
1383 | - Upstream release. | |
1384 | ||
1385 | * Sun Mar 27 2016 Frank Ch. Eigler <fche@redhat.com> - 3.0-1 | |
1386 | - Upstream release. | |
1387 | ||
1388 | * Thu Oct 08 2015 Frank Ch. Eigler <fche@redhat.com> - 2.9-1 | |
1389 | - Upstream release. | |
1390 | ||
1391 | * Wed Jun 17 2015 Abegail Jakop <ajakop@redhat.com> - 2.8-1 | |
1392 | - Upstream release. | |
1393 | ||
1394 | * Wed Feb 18 2015 Frank Ch. Eigler <fche@redhat.com> - 2.7-1 | |
1395 | - Upstream release. | |
1396 | ||
1397 | * Fri Sep 05 2014 Josh Stone <jistone@redhat.com> - 2.6-1 | |
1398 | - Upstream release. | |
1399 | ||
1400 | * Mon Jul 07 2014 Josh Stone <jistone@redhat.com> | |
1401 | - Flip with_dyninst to an %%ifarch passlist. | |
1402 | ||
1403 | * Wed Apr 30 2014 Jonathan Lebon <jlebon@redhat.com> - 2.5-1 | |
1404 | - Upstream release. | |
1405 | ||
1406 | * Thu Feb 13 2014 Lukas Berk <lberk@redhat.com> | |
1407 | - Add directory checks for runtime-java sym links | |
1408 | ||
1409 | * Mon Jan 06 2014 Jonathan Lebon <jlebon@redhat.com> | |
1410 | - Added dracut module to initscript package | |
1411 | ||
1412 | * Wed Nov 06 2013 Frank Ch. Eigler <fche@redhat.com> - 2.4-1 | |
1413 | - Upstream release. | |
1414 | ||
1415 | * Wed Oct 09 2013 Jonathan Lebon <jlebon@redhat.com> | |
1416 | - Added runtime-virthost and runtime-virtguest packages. | |
1417 | ||
1418 | * Thu Jul 25 2013 Frank Ch. Eigler <fche@redhat.com> - 2.3-1 | |
1419 | - Upstream release. | |
1420 | ||
1421 | * Thu May 16 2013 Frank Ch. Eigler <fche@redhat.com> - 2.2.1-1 | |
1422 | - Upstream release. | |
1423 | ||
1424 | * Tue May 14 2013 Frank Ch. Eigler <fche@redhat.com> - 2.2-1 | |
1425 | - Upstream release. | |
1426 | ||
1427 | * Wed Feb 13 2013 Serguei Makarov <smakarov@redhat.com> - 2.1-1 | |
1428 | - Upstream release. | |
1429 | ||
1430 | * Tue Oct 09 2012 Josh Stone <jistone@redhat.com> - 2.0-1 | |
1431 | - Upstream release. | |
1432 | ||
1433 | * Fri Jul 13 2012 Peter Robinson <pbrobinson@fedoraproject.org> | |
1434 | - Fix ifarch statement | |
1435 | - use file based requires for glibc-devel on x86_64 so that we work in koji | |
1436 | ||
1437 | * Sun Jun 17 2012 Frank Ch. Eigler <fche@redhat.com> - 1.8-1 | |
1438 | - Upstream release. | |
1439 | ||
1440 | * Wed Feb 01 2012 Frank Ch. Eigler <fche@redhat.com> - 1.7-1 | |
1441 | - Upstream release. | |
1442 | ||
1443 | * Fri Jan 13 2012 David Smith <dsmith@redhat.com> - 1.6-2 | |
1444 | - Fixed /bin/mktemp require. | |
1445 | ||
1446 | * Mon Jul 25 2011 Stan Cox <scox@redhat.com> - 1.6-1 | |
1447 | - Upstream release. | |
1448 | ||
1449 | * Mon May 23 2011 Stan Cox <scox@redhat.com> - 1.5-1 | |
1450 | - Upstream release. | |
1451 | ||
1452 | * Mon Jan 17 2011 Frank Ch. Eigler <fche@redhat.com> - 1.4-1 | |
1453 | - Upstream release. | |
1454 | ||
1455 | * Wed Jul 21 2010 Josh Stone <jistone@redhat.com> - 1.3-1 | |
1456 | - Upstream release. | |
1457 | ||
1458 | * Mon Mar 22 2010 Frank Ch. Eigler <fche@redhat.com> - 1.2-1 | |
1459 | - Upstream release. | |
1460 | ||
1461 | * Mon Dec 21 2009 David Smith <dsmith@redhat.com> - 1.1-1 | |
1462 | - Upstream release. | |
1463 | ||
1464 | * Tue Sep 22 2009 Josh Stone <jistone@redhat.com> - 1.0-1 | |
1465 | - Upstream release. | |
1466 | ||
1467 | * Tue Aug 4 2009 Josh Stone <jistone@redhat.com> - 0.9.9-1 | |
1468 | - Upstream release. | |
1469 | ||
1470 | * Thu Jun 11 2009 Josh Stone <jistone@redhat.com> - 0.9.8-1 | |
1471 | - Upstream release. | |
1472 | ||
1473 | * Thu Apr 23 2009 Josh Stone <jistone@redhat.com> - 0.9.7-1 | |
1474 | - Upstream release. | |
1475 | ||
1476 | * Fri Mar 27 2009 Josh Stone <jistone@redhat.com> - 0.9.5-1 | |
1477 | - Upstream release. | |
1478 | ||
1479 | * Wed Mar 18 2009 Will Cohen <wcohen@redhat.com> - 0.9-2 | |
1480 | - Add location of man pages. | |
1481 | ||
1482 | * Tue Feb 17 2009 Frank Ch. Eigler <fche@redhat.com> - 0.9-1 | |
1483 | - Upstream release. | |
1484 | ||
1485 | * Thu Nov 13 2008 Frank Ch. Eigler <fche@redhat.com> - 0.8-1 | |
1486 | - Upstream release. | |
1487 | ||
1488 | * Tue Jul 15 2008 Frank Ch. Eigler <fche@redhat.com> - 0.7-1 | |
1489 | - Upstream release. | |
1490 | ||
1491 | * Fri Feb 1 2008 Frank Ch. Eigler <fche@redhat.com> - 0.6.1-3 | |
1492 | - Add zlib-devel to buildreq; missing from crash-devel | |
1493 | - Process testsuite .stp files for #!stap->#!/usr/bin/stap | |
1494 | ||
1495 | * Fri Jan 18 2008 Frank Ch. Eigler <fche@redhat.com> - 0.6.1-1 | |
1496 | - Add crash-devel buildreq to build staplog.so crash(8) module. | |
1497 | - Many robustness & functionality improvements: | |
1498 | ||
1499 | * Wed Dec 5 2007 Will Cohen <wcohen@redhat.com> - 0.6-2 | |
1500 | - Correct Source to point to location contain code. | |
1501 | ||
1502 | * Thu Aug 9 2007 David Smith <dsmith@redhat.com> - 0.6-1 | |
1503 | - Bumped version, added libcap-devel BuildRequires. | |
1504 | ||
1505 | * Wed Jul 11 2007 Will Cohen <wcohen@redhat.com> - 0.5.14-2 | |
1506 | - Fix Requires and BuildRequires for sqlite. | |
1507 | ||
1508 | * Mon Jul 2 2007 Frank Ch. Eigler <fche@redhat.com> - 0.5.14-1 | |
1509 | - Many robustness improvements: 1117, 1134, 1305, 1307, 1570, 1806, | |
1510 | 2033, 2116, 2224, 2339, 2341, 2406, 2426, 2438, 2583, 3037, | |
1511 | 3261, 3282, 3331, 3428 3519, 3545, 3625, 3648, 3880, 3888, 3911, | |
1512 | 3952, 3965, 4066, 4071, 4075, 4078, 4081, 4096, 4119, 4122, 4127, | |
1513 | 4146, 4171, 4179, 4183, 4221, 4224, 4254, 4281, 4319, 4323, 4326, | |
1514 | 4329, 4332, 4337, 4415, 4432, 4444, 4445, 4458, 4467, 4470, 4471, | |
1515 | 4518, 4567, 4570, 4579, 4589, 4609, 4664 | |
1516 | ||
1517 | * Mon Mar 26 2007 Frank Ch. Eigler <fche@redhat.com> - 0.5.13-1 | |
1518 | - An emergency / preliminary refresh, mainly for compatibility | |
1519 | with 2.6.21-pre kernels. | |
1520 | ||
1521 | * Mon Jan 1 2007 Frank Ch. Eigler <fche@redhat.com> - 0.5.12-1 | |
1522 | - Many changes, see NEWS file. | |
1523 | ||
1524 | * Tue Sep 26 2006 David Smith <dsmith@redhat.com> - 0.5.10-1 | |
1525 | - Added 'systemtap-runtime' subpackage. | |
1526 | ||
1527 | * Wed Jul 19 2006 Roland McGrath <roland@redhat.com> - 0.5.9-1 | |
1528 | - PRs 2669, 2913 | |
1529 | ||
1530 | * Fri Jun 16 2006 Roland McGrath <roland@redhat.com> - 0.5.8-1 | |
1531 | - PRs 2627, 2520, 2228, 2645 | |
1532 | ||
1533 | * Fri May 5 2006 Frank Ch. Eigler <fche@redhat.com> - 0.5.7-1 | |
1534 | - PRs 2511 2453 2307 1813 1944 2497 2538 2476 2568 1341 2058 2220 2437 | |
1535 | 1326 2014 2599 2427 2438 2465 1930 2149 2610 2293 2634 2506 2433 | |
1536 | ||
1537 | * Tue Apr 4 2006 Roland McGrath <roland@redhat.com> - 0.5.5-1 | |
1538 | - Many changes, affected PRs include: 2068, 2293, 1989, 2334, | |
1539 | 1304, 2390, 2425, 953. | |
1540 | ||
1541 | * Wed Feb 1 2006 Frank Ch. Eigler <fche@redhat.com> - 0.5.4-1 | |
1542 | - PRs 1916, 2205, 2142, 2060, 1379 | |
1543 | ||
1544 | * Mon Jan 16 2006 Roland McGrath <roland@redhat.com> - 0.5.3-1 | |
1545 | - Many changes, affected PRs include: 2056, 1144, 1379, 2057, | |
1546 | 2060, 1972, 2140, 2148 | |
1547 | ||
1548 | * Mon Dec 19 2005 Roland McGrath <roland@redhat.com> - 0.5.2-1 | |
1549 | - Fixed build with gcc 4.1, various tapset changes. | |
1550 | ||
1551 | * Wed Dec 7 2005 Roland McGrath <roland@redhat.com> - 0.5.1-1 | |
1552 | - elfutils update, build changes | |
1553 | ||
1554 | * Fri Dec 02 2005 Frank Ch. Eigler <fche@redhat.com> - 0.5-1 | |
1555 | - Many fixes and improvements: 1425, 1536, 1505, 1380, 1329, 1828, 1271, | |
1556 | 1339, 1340, 1345, 1837, 1917, 1903, 1336, 1868, 1594, 1564, 1276, 1295 | |
1557 | ||
1558 | * Mon Oct 31 2005 Roland McGrath <roland@redhat.com> - 0.4.2-1 | |
1559 | - Many fixes and improvements: PRs 1344, 1260, 1330, 1295, 1311, 1368, | |
1560 | 1182, 1131, 1332, 1366, 1456, 1271, 1338, 1482, 1477, 1194. | |
1561 | ||
1562 | * Wed Sep 14 2005 Roland McGrath <roland@redhat.com> - 0.4.1-1 | |
1563 | - Many fixes and improvements since 0.2.2; relevant PRs include: | |
1564 | 1122, 1134, 1155, 1172, 1174, 1175, 1180, 1186, 1187, 1191, 1193, 1195, | |
1565 | 1197, 1205, 1206, 1209, 1213, 1244, 1257, 1258, 1260, 1265, 1268, 1270, | |
1566 | 1289, 1292, 1306, 1335, 1257 | |
1567 | ||
1568 | * Wed Sep 7 2005 Frank Ch. Eigler <fche@redhat.com> | |
1569 | - Bump version. | |
1570 | ||
1571 | * Tue Aug 16 2005 Frank Ch. Eigler <fche@redhat.com> | |
1572 | - Bump version. | |
1573 | ||
1574 | * Wed Aug 3 2005 Martin Hunt <hunt@redhat.com> - 0.2.2-1 | |
1575 | - Add directory /var/cache/systemtap | |
1576 | - Add stp_check to /usr/libexec/systemtap | |
1577 | ||
1578 | * Wed Aug 3 2005 Roland McGrath <roland@redhat.com> - 0.2.1-1 | |
1579 | - New version 0.2.1, various fixes. | |
1580 | ||
1581 | * Fri Jul 29 2005 Roland McGrath <roland@redhat.com> - 0.2-1 | |
1582 | - New version 0.2, requires elfutils 0.111 | |
1583 | ||
1584 | * Mon Jul 25 2005 Roland McGrath <roland@redhat.com> | |
1585 | - Clean up spec file, build bundled elfutils. | |
1586 | ||
1587 | * Thu Jul 21 2005 Martin Hunt <hunt@redhat.com> | |
1588 | - Set Version to use version from autoconf. | |
1589 | - Fix up some of the path names. | |
1590 | - Add Requires and BuildRequires. | |
1591 | ||
1592 | * Tue Jul 19 2005 Will Cohen <wcohen@redhat.com> | |
1593 | - Initial creation of RPM. |