Next: Set Watchpoints, Up: Breakpoints [Contents][Index]
Breakpoints are set with the break command (abbreviated
b). The debugger convenience variable ‘$bpnum’ records the
number of the breakpoint you’ve set most recently:
(gdb) b main Breakpoint 1 at 0x11c6: file zeoes.c, line 24. (gdb) p $bpnum $1 = 1
A breakpoint may be mapped to multiple code locations for example with inlined functions, Ada generics, C++ templates or overloaded function names. GDB then indicates the number of code locations in the breakpoint command output:
(gdb) b some_func Breakpoint 2 at 0x1179: some_func. (3 locations) (gdb) p $bpnum $2 = 2 (gdb)
When your program stops on a breakpoint, the convenience variables ‘$_hit_bpnum’ and ‘$_hit_locno’ are respectively set to the number of the encountered breakpoint and the number of the breakpoint’s code location:
Thread 1 "zeoes" hit Breakpoint 2.1, some_func () at zeoes.c:8
8 printf("some func\n");
(gdb) p $_hit_bpnum
$5 = 2
(gdb) p $_hit_locno
$6 = 1
(gdb)
Note that ‘$_hit_bpnum’ and ‘$bpnum’ are not equivalent: ‘$_hit_bpnum’ is set to the breakpoint number last hit, while ‘$bpnum’ is set to the breakpoint number last set.
If the encountered breakpoint has only one code location, ‘$_hit_locno’ is set to 1:
Breakpoint 1, main (argc=1, argv=0x7fffffffe018) at zeoes.c:24 24 if (argc > 1) (gdb) p $_hit_bpnum $3 = 1 (gdb) p $_hit_locno $4 = 1 (gdb)
The ‘$_hit_bpnum’ and ‘$_hit_locno’ variables can typically be used in a breakpoint command list. (see Breakpoint Command Lists). For example, as part of the breakpoint command list, you can disable completely the encountered breakpoint using disable $_hit_bpnum or disable the specific encountered breakpoint location using disable $_hit_bpnum.$_hit_locno. If a breakpoint has only one location, ‘$_hit_locno’ is set to 1 and the commands disable $_hit_bpnum and disable $_hit_bpnum.$_hit_locno both disable the breakpoint.
You can also define aliases to easily disable the last hit location or last hit breakpoint:
(gdb) alias lld = disable $_hit_bpnum.$_hit_locno (gdb) alias lbd = disable $_hit_bpnum
break locspecSet a breakpoint at all the code locations in your program that result from resolving the given locspec. locspec can specify a function name, a line number, an address of an instruction, and more. See Location Specifications, for the various forms of locspec. The breakpoint will stop your program just before it executes the instruction at the address of any of the breakpoint’s code locations.
When using source languages that permit overloading of symbols, such as C++, a function name may refer to more than one symbol, and thus more than one place to break. See Ambiguous Expressions, for a discussion of that situation.
It is also possible to insert a breakpoint that will stop the program only if a specific thread (see Thread-Specific Breakpoints), specific inferior (see Inferior-Specific Breakpoints), or a specific task (see Ada Tasks) hits that breakpoint.
breakWhen called without any arguments, break sets a breakpoint at
the next instruction to be executed in the selected stack frame
(see Examining the Stack). In any selected frame but the
innermost, this makes your program stop as soon as control
returns to that frame. This is similar to the effect of a
finish command in the frame inside the selected frame—except
that finish does not leave an active breakpoint. If you use
break without an argument in the innermost frame, GDB stops
the next time it reaches the current location; this may be useful
inside loops.
GDB normally ignores breakpoints when it resumes execution, until at least one instruction has been executed. If it did not do this, you would be unable to proceed past a breakpoint without first disabling the breakpoint. This rule applies whether or not the breakpoint already existed when your program stopped.
break … if condSet a breakpoint with condition cond; evaluate the expression cond each time the breakpoint is reached, and stop only if the value is nonzero—that is, if cond evaluates as true. ‘…’ stands for one of the possible arguments described above (or no argument) specifying where to break. See Break Conditions, for more information on breakpoint conditions.
The breakpoint may be mapped to multiple locations. If the breakpoint condition cond is invalid at some but not all of the locations, the locations for which the condition is invalid are disabled. For example, GDB reports below that two of the three locations are disabled.
(gdb) break func if a == 10 warning: failed to validate condition at location 0x11ce, disabling: No symbol "a" in current context. warning: failed to validate condition at location 0x11b6, disabling: No symbol "a" in current context. Breakpoint 1 at 0x11b6: func. (3 locations)
Locations that are disabled because of the condition are denoted by an
uppercase N in the output of the info breakpoints
command:
(gdb) info breakpoints
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if a == 10
1.1 N* 0x00000000000011b6 in ...
1.2 y 0x00000000000011c2 in ...
1.3 N* 0x00000000000011ce in ...
(*): Breakpoint condition is invalid at this location.
If the breakpoint condition cond is invalid in the context of
all the locations of the breakpoint, GDB refuses to
define the breakpoint. For example, if variable foo is an
undefined variable:
(gdb) break func if foo No symbol "foo" in current context.
break … -force-condition if condThere may be cases where the condition cond is invalid at all
the current locations, but the user knows that it will be valid at a
future location; for example, because of a library load. In such
cases, by using the -force-condition keyword before ‘if’,
GDB can be forced to define the breakpoint with the given
condition expression instead of refusing it.
(gdb) break func -force-condition if foo warning: failed to validate condition at location 1, disabling: No symbol "foo" in current context. warning: failed to validate condition at location 2, disabling: No symbol "foo" in current context. warning: failed to validate condition at location 3, disabling: No symbol "foo" in current context. Breakpoint 1 at 0x1158: test.c:18. (3 locations)
This causes all the present locations where the breakpoint would
otherwise be inserted, to be disabled, as seen in the example above.
However, if there exist locations at which the condition is valid, the
-force-condition keyword has no effect.
tbreak argsSet a breakpoint enabled only for one stop. The args are the
same as for the break command, and the breakpoint is set in the same
way, but the breakpoint is automatically deleted after the first time your
program stops there. See Disabling Breakpoints.
hbreak argsSet a hardware-assisted breakpoint. The args are the same as for the
break command and the breakpoint is set in the same way, but the
breakpoint requires hardware support and some target hardware may not
have this support. The main purpose of this is EPROM/ROM code
debugging, so you can set a breakpoint at an instruction without
changing the instruction. This can be used with the new trap-generation
provided by SPARClite DSU and most x86-based targets. These targets
will generate traps when a program accesses some data or instruction
address that is assigned to the debug registers. However the hardware
breakpoint registers can take a limited number of breakpoints. For
example, on the DSU, only two data breakpoints can be set at a time, and
GDB will reject this command if more than two are used. Delete
or disable unused hardware breakpoints before setting new ones
(see Disabling Breakpoints).
See Break Conditions.
For remote targets, you can restrict the number of hardware
breakpoints GDB will use, see set remote hardware-breakpoint-limit.
thbreak argsSet a hardware-assisted breakpoint enabled only for one stop. The args
are the same as for the hbreak command and the breakpoint is set in
the same way. However, like the tbreak command,
the breakpoint is automatically deleted after the
first time your program stops there. Also, like the hbreak
command, the breakpoint requires hardware support and some target hardware
may not have this support. See Disabling Breakpoints.
See also Break Conditions.
rbreak regexSet breakpoints on all functions matching the regular expression
regex. This command sets an unconditional breakpoint on all
matches, printing a list of all breakpoints it set. Once these
breakpoints are set, they are treated just like the breakpoints set with
the break command. You can delete them, disable them, or make
them conditional the same way as any other breakpoint.
In programs using different languages, GDB chooses the syntax to print the list of all breakpoints it sets according to the ‘set language’ value: using ‘set language auto’ (see Set Language Automatically) means to use the language of the breakpoint’s function, other values mean to use the manually specified language (see Set Language Manually).
The syntax of the regular expression is the standard one used with tools
like grep. Note that this is different from the syntax used by
shells, so for instance foo* matches all functions that include
an fo followed by zero or more os. There is an implicit
.* leading and trailing the regular expression you supply, so to
match only functions that begin with foo, use ^foo.
When debugging C++ programs, rbreak is useful for setting
breakpoints on overloaded functions that are not members of any special
classes.
The rbreak command can be used to set breakpoints in
all the functions in a program, like this:
(gdb) rbreak .
rbreak file:regexIf rbreak is called with a filename qualification, it limits
the search for functions matching the given regular expression to the
specified file. This can be used, for example, to set breakpoints on
every function in a given file:
(gdb) rbreak file.c:.
The colon separating the filename qualifier from the regex may optionally be surrounded by spaces.
info breakpoints [list…]info break [list…]Print a table of all breakpoints, watchpoints, tracepoints, and catchpoints set and not deleted. Optional argument n means print information only about the specified breakpoint(s) (or watchpoint(s) or tracepoint(s) or catchpoint(s)). For each breakpoint, following columns are printed:
Breakpoint, watchpoint, tracepoint, or catchpoint.
Whether the breakpoint is marked to be disabled or deleted when hit.
Enabled breakpoints are marked with ‘y’. ‘n’ marks breakpoints that are not enabled.
Where the breakpoint is in your program, as a memory address. For a pending breakpoint whose address is not yet known, this field will contain ‘<PENDING>’. Such breakpoint won’t fire until a shared library that has the symbol or line referred by breakpoint is loaded. See below for details. A breakpoint with several locations will have ‘<MULTIPLE>’ in this field—see below for details.
Where the breakpoint is in the source for your program, as a file and line number. For a pending breakpoint, the original string passed to the breakpoint command will be listed as it cannot be resolved until the appropriate shared library is loaded in the future.
If a breakpoint is conditional, there are two evaluation modes: “host” and
“target”. If mode is “host”, breakpoint condition evaluation is done by
GDB on the host’s side. If it is “target”, then the condition
is evaluated by the target. The info break command shows
the condition on the line following the affected breakpoint, together with
its condition evaluation mode in between parentheses.
Breakpoint commands, if any, are listed after that. A pending breakpoint is allowed to have a condition specified for it. The condition is not parsed for validity until a shared library is loaded that allows the pending breakpoint to resolve to a valid location.
info break with a breakpoint
number n as argument lists only that breakpoint. The
convenience variable $_ and the default examining-address for
the x command are set to the address of the last breakpoint
listed (see Examining Memory).
info break displays a count of the number of times the breakpoint
has been hit. This is especially useful in conjunction with the
ignore command. You can ignore a large number of breakpoint
hits, look at the breakpoint info to see how many times the breakpoint
was hit, and then run again, ignoring one less than that number. This
will get you quickly to the last hit of that breakpoint.
For a breakpoints with an enable count (xref) greater than 1,
info break also displays that count.
GDB allows you to set any number of breakpoints at the same place in your program. There is nothing silly or meaningless about this. When the breakpoints are conditional, this is even useful (see Break Conditions).
It is possible that a single logical breakpoint is set at several code locations in your program. See Location Specifications, for examples.
A breakpoint with multiple code locations is displayed in the breakpoint table using several rows—one header row, followed by one row for each code location. The header row has ‘<MULTIPLE>’ in the address column. Each code location row contains the actual address, source file, source line and function of its code location. The number column for a code location is of the form breakpoint-number.location-number.
For example:
Num Type Disp Enb Address What
1 breakpoint keep y <MULTIPLE>
stop only if i==1
breakpoint already hit 1 time
1.1 y 0x080486a2 in void foo<int>() at t.cc:8
1.2 y 0x080486ca in void foo<double>() at t.cc:8
You cannot delete the individual locations from a breakpoint. However,
each location can be individually enabled or disabled by passing
breakpoint-number.location-number as argument to the
enable and disable commands. It’s also possible to
enable and disable a range of location-number
locations using a breakpoint-number and two location-numbers,
in increasing order, separated by a hyphen, like
breakpoint-number.location-number1-location-number2,
in which case GDB acts on all the locations in the range (inclusive).
Disabling or enabling the parent breakpoint (see Disabling) affects
all of the locations that belong to that breakpoint.
Locations that are enabled while their parent breakpoint is disabled
won’t trigger a break, and are denoted by y- in the Enb
column. For example:
(gdb) info breakpoints Num Type Disp Enb Address What 1 breakpoint keep n <MULTIPLE> 1.1 y- 0x00000000000011b6 in ... 1.2 y- 0x00000000000011c2 in ... 1.3 n 0x00000000000011ce in ...
It’s quite common to have a breakpoint inside a shared library. Shared libraries can be loaded and unloaded explicitly, and possibly repeatedly, as the program is executed. To support this use case, GDB updates breakpoint locations whenever any shared library is loaded or unloaded. Typically, you would set a breakpoint in a shared library at the beginning of your debugging session, when the library is not loaded, and when the symbols from the library are not available. When you try to set breakpoint, GDB will ask you if you want to set a so called pending breakpoint—breakpoint whose address is not yet resolved.
After the program is run, whenever a new shared library is loaded, GDB reevaluates all the breakpoints. When a newly loaded shared library contains the symbol or line referred to by some pending breakpoint, that breakpoint is resolved and becomes an ordinary breakpoint. When a library is unloaded, all breakpoints that refer to its symbols or source lines become pending again.
This logic works for breakpoints with multiple locations, too. For example, if you have a breakpoint in a C++ template function, and a newly loaded shared library has an instantiation of that template, a new location is added to the list of locations for the breakpoint.
Except for having unresolved address, pending breakpoints do not differ from regular breakpoints. You can set conditions or commands, enable and disable them and perform other breakpoint operations.
GDB provides some additional commands for controlling what happens when the ‘break’ command cannot resolve the location spec to any code location in your program (see Location Specifications):
set breakpoint pending autoThis is the default behavior. When GDB cannot resolve the location spec, it queries you whether a pending breakpoint should be created.
set breakpoint pending onThis indicates that when GDB cannot resolve the location spec, it should create a pending breakpoint without confirmation.
set breakpoint pending offThis indicates that pending breakpoints are not to be created. If GDB cannot resolve the location spec, it aborts the breakpoint creation with an error. This setting does not affect any pending breakpoints previously created.
show breakpoint pendingShow the current behavior setting for creating pending breakpoints.
The settings above only affect the break command and its
variants. Once a breakpoint is set, it will be automatically updated
as shared libraries are loaded and unloaded.
For some targets, GDB can automatically decide if hardware or
software breakpoints should be used, depending on whether the
breakpoint address is read-only or read-write. This applies to
breakpoints set with the break command as well as to internal
breakpoints set by commands like next and finish. For
breakpoints set with hbreak, GDB will always use hardware
breakpoints.
You can control this automatic behaviour with the following commands:
set breakpoint auto-hw onThis is the default behavior. When GDB sets a breakpoint, it will try to use the target memory map to decide if software or hardware breakpoint must be used.
set breakpoint auto-hw offThis indicates GDB should not automatically select breakpoint type. If the target provides a memory map, GDB will warn when trying to set software breakpoint at a read-only address.
GDB normally implements breakpoints by replacing the program code at the breakpoint address with a special instruction, which, when executed, given control to the debugger. By default, the program code is so modified only when the program is resumed. As soon as the program stops, GDB restores the original instructions. This behaviour guards against leaving breakpoints inserted in the target should gdb abrubptly disconnect. However, with slow remote targets, inserting and removing breakpoint can reduce the performance. This behavior can be controlled with the following commands::
set breakpoint always-inserted offAll breakpoints, including newly added by the user, are inserted in the target only when the target is resumed. All breakpoints are removed from the target when it stops. This is the default mode.
set breakpoint always-inserted onCauses all breakpoints to be inserted in the target at all times. If the user adds a new breakpoint, or changes an existing breakpoint, the breakpoints in the target are updated immediately. A breakpoint is removed from the target only when breakpoint itself is deleted.
GDB handles conditional breakpoints by evaluating these conditions when a breakpoint breaks. If the condition is true, then the process being debugged stops, otherwise the process is resumed.
If the target supports evaluating conditions on its end, GDB may download the breakpoint, together with its conditions, to it.
This feature can be controlled via the following commands:
set breakpoint condition-evaluation hostThis option commands GDB to evaluate the breakpoint conditions on the host’s side. Unconditional breakpoints are sent to the target which in turn receives the triggers and reports them back to GDB for condition evaluation. This is the standard evaluation mode.
set breakpoint condition-evaluation targetThis option commands GDB to download breakpoint conditions to the target at the moment of their insertion. The target is responsible for evaluating the conditional expression and reporting breakpoint stop events back to GDB whenever the condition is true. Due to limitations of target-side evaluation, some conditions cannot be evaluated there, e.g., conditions that depend on local data that is only known to the host. Examples include conditional expressions involving convenience variables, complex types that cannot be handled by the agent expression parser and expressions that are too long to be sent over to the target, specially when the target is a remote system. In these cases, the conditions will be evaluated by GDB.
set breakpoint condition-evaluation autoThis is the default mode. If the target supports evaluating breakpoint conditions on its end, GDB will download breakpoint conditions to the target (limitations mentioned previously apply). If the target does not support breakpoint condition evaluation, then GDB will fallback to evaluating all these conditions on the host’s side.
GDB itself sometimes sets breakpoints in your program for
special purposes, such as proper handling of longjmp (in C
programs). These internal breakpoints are assigned negative numbers,
starting with -1; ‘info breakpoints’ does not display them.
You can see these breakpoints with the GDB maintenance command
‘maint info breakpoints’ (see maint info breakpoints).
Next: Set Watchpoints, Up: Breakpoints [Contents][Index]