Next: , Previous: ARM Floating Point, Up: ARM-Dependent


9.4.4 ARM Machine Directives

.2byte expression [, expression]*
.4byte expression [, expression]*
.8byte expression [, expression]*
These directives write 2, 4 or 8 byte values to the output section.


.align expression [, expression]
This is the generic .align directive. For the ARM however if the first argument is zero (ie no alignment is needed) the assembler will behave as if the argument had been 2 (ie pad to the next four byte boundary). This is for compatibility with ARM's own assembler.


.arch name
Select the target architecture. Valid values for name are the same as for the -march commandline option.

Specifying .arch clears any previously selected architecture extensions.


.arch_extension name
Add or remove an architecture extension to the target architecture. Valid values for name are the same as those accepted as architectural extensions by the -mcpu commandline option.

.arch_extension may be used multiple times to add or remove extensions incrementally to the architecture being compiled for.


.arm
This performs the same action as .code 32.


.bss
This directive switches to the .bss section.


.cantunwind
Prevents unwinding through the current function. No personality routine or exception table data is required or permitted.


.code [16|32]
This directive selects the instruction set being generated. The value 16 selects Thumb, with the value 32 selecting ARM.


.cpu name
Select the target processor. Valid values for name are the same as for the -mcpu commandline option.

Specifying .cpu clears any previously selected architecture extensions.


name .dn register name [.type] [[index]]
name .qn register name [.type] [[index]]
The dn and qn directives are used to create typed and/or indexed register aliases for use in Advanced SIMD Extension (Neon) instructions. The former should be used to create aliases of double-precision registers, and the latter to create aliases of quad-precision registers.

If these directives are used to create typed aliases, those aliases can be used in Neon instructions instead of writing types after the mnemonic or after each operand. For example:

                  x .dn d2.f32
                  y .dn d3.f32
                  z .dn d4.f32[1]
                  vmul x,y,z
     

This is equivalent to writing the following:

                  vmul.f32 d2,d3,d4[1]
     

Aliases created using dn or qn can be destroyed using unreq.


.eabi_attribute tag, value
Set the EABI object attribute tag to value.

The tag is either an attribute number, or one of the following: Tag_CPU_raw_name, Tag_CPU_name, Tag_CPU_arch, Tag_CPU_arch_profile, Tag_ARM_ISA_use, Tag_THUMB_ISA_use, Tag_FP_arch, Tag_WMMX_arch, Tag_Advanced_SIMD_arch, Tag_PCS_config, Tag_ABI_PCS_R9_use, Tag_ABI_PCS_RW_data, Tag_ABI_PCS_RO_data, Tag_ABI_PCS_GOT_use, Tag_ABI_PCS_wchar_t, Tag_ABI_FP_rounding, Tag_ABI_FP_denormal, Tag_ABI_FP_exceptions, Tag_ABI_FP_user_exceptions, Tag_ABI_FP_number_model, Tag_ABI_align_needed, Tag_ABI_align_preserved, Tag_ABI_enum_size, Tag_ABI_HardFP_use, Tag_ABI_VFP_args, Tag_ABI_WMMX_args, Tag_ABI_optimization_goals, Tag_ABI_FP_optimization_goals, Tag_compatibility, Tag_CPU_unaligned_access, Tag_FP_HP_extension, Tag_ABI_FP_16bit_format, Tag_MPextension_use, Tag_DIV_use, Tag_nodefaults, Tag_also_compatible_with, Tag_conformance, Tag_T2EE_use, Tag_Virtualization_use

The value is either a number, "string", or number, "string" depending on the tag.

Note - the following legacy values are also accepted by tag: Tag_VFP_arch, Tag_ABI_align8_needed, Tag_ABI_align8_preserved, Tag_VFP_HP_extension,


.even
This directive aligns to an even-numbered address.


.extend expression [, expression]*
.ldouble expression [, expression]*
These directives write 12byte long double floating-point values to the output section. These are not compatible with current ARM processors or ABIs.


.fnend
Marks the end of a function with an unwind table entry. The unwind index table entry is created when this directive is processed.

If no personality routine has been specified then standard personality routine 0 or 1 will be used, depending on the number of unwind opcodes required.


.fnstart
Marks the start of a function with an unwind table entry.


.force_thumb
This directive forces the selection of Thumb instructions, even if the target processor does not support those instructions


.fpu name
Select the floating-point unit to assemble for. Valid values for name are the same as for the -mfpu commandline option.


.handlerdata
Marks the end of the current function, and the start of the exception table entry for that function. Anything between this directive and the .fnend directive will be added to the exception table entry.

Must be preceded by a .personality or .personalityindex directive.


.inst opcode [ , ... ]
.inst.n opcode [ , ... ]
.inst.w opcode [ , ... ]
Generates the instruction corresponding to the numerical value opcode. .inst.n and .inst.w allow the Thumb instruction size to be specified explicitly, overriding the normal encoding rules.
.ldouble expression [, expression]*
See .extend.


.ltorg
This directive causes the current contents of the literal pool to be dumped into the current section (which is assumed to be the .text section) at the current location (aligned to a word boundary). GAS maintains a separate literal pool for each section and each sub-section. The .ltorg directive will only affect the literal pool of the current section and sub-section. At the end of assembly all remaining, un-empty literal pools will automatically be dumped.

Note - older versions of GAS would dump the current literal pool any time a section change occurred. This is no longer done, since it prevents accurate control of the placement of literal pools.


.movsp reg [, #offset]
Tell the unwinder that reg contains an offset from the current stack pointer. If offset is not specified then it is assumed to be zero.


.object_arch name
Override the architecture recorded in the EABI object attribute section. Valid values for name are the same as for the .arch directive. Typically this is useful when code uses runtime detection of CPU features.


.packed expression [, expression]*
This directive writes 12-byte packed floating-point values to the output section. These are not compatible with current ARM processors or ABIs.


.pad #count
Generate unwinder annotations for a stack adjustment of count bytes. A positive value indicates the function prologue allocated stack space by decrementing the stack pointer.


.personality name
Sets the personality routine for the current function to name.


.personalityindex index
Sets the personality routine for the current function to the EABI standard routine number index


.pool
This is a synonym for .ltorg.


name .req register name
This creates an alias for register name called name. For example:
                  foo .req r0
     


.save reglist
Generate unwinder annotations to restore the registers in reglist. The format of reglist is the same as the corresponding store-multiple instruction.
     
core registers
.save {r4, r5, r6, lr} stmfd sp!, {r4, r5, r6, lr}
FPA registers
.save f4, 2 sfmfd f4, 2, [sp]!
VFP registers
.save {d8, d9, d10} fstmdx sp!, {d8, d9, d10}
iWMMXt registers
.save {wr10, wr11} wstrd wr11, [sp, #-8]! wstrd wr10, [sp, #-8]! or .save wr11 wstrd wr11, [sp, #-8]! .save wr10 wstrd wr10, [sp, #-8]!


.setfp fpreg, spreg [, #offset]
Make all unwinder annotations relative to a frame pointer. Without this the unwinder will use offsets from the stack pointer.

The syntax of this directive is the same as the add or mov instruction used to set the frame pointer. spreg must be either sp or mentioned in a previous .movsp directive.

          .movsp ip
          mov ip, sp
          ...
          .setfp fp, ip, #4
          add fp, ip, #4
     


.secrel32 expression [, expression]*
This directive emits relocations that evaluate to the section-relative offset of each expression's symbol. This directive is only supported for PE targets.


.syntax [unified | divided]
This directive sets the Instruction Set Syntax as described in the ARM-Instruction-Set section.


.thumb
This performs the same action as .code 16.


.thumb_func
This directive specifies that the following symbol is the name of a Thumb encoded function. This information is necessary in order to allow the assembler and linker to generate correct code for interworking between Arm and Thumb instructions and should be used even if interworking is not going to be performed. The presence of this directive also implies .thumb

This directive is not neccessary when generating EABI objects. On these targets the encoding is implicit when generating Thumb code.


.thumb_set
This performs the equivalent of a .set directive in that it creates a symbol which is an alias for another symbol (possibly not yet defined). This directive also has the added property in that it marks the aliased symbol as being a thumb function entry point, in the same way that the .thumb_func directive does.


.tlsdescseq tls-variable
This directive is used to annotate parts of an inlined TLS descriptor trampoline. Normally the trampoline is provided by the linker, and this directive is not needed.


.unreq alias-name
This undefines a register alias which was previously defined using the req, dn or qn directives. For example:
                  foo .req r0
                  .unreq foo
     

An error occurs if the name is undefined. Note - this pseudo op can be used to delete builtin in register name aliases (eg 'r0'). This should only be done if it is really necessary.


.unwind_raw offset, byte1, ...
Insert one of more arbitary unwind opcode bytes, which are known to adjust the stack pointer by offset bytes.

For example .unwind_raw 4, 0xb1, 0x01 is equivalent to .save {r0}


.vsave vfp-reglist
Generate unwinder annotations to restore the VFP registers in vfp-reglist using FLDMD. Also works for VFPv3 registers that are to be restored using VLDM. The format of vfp-reglist is the same as the corresponding store-multiple instruction.
     
VFP registers
.vsave {d8, d9, d10} fstmdd sp!, {d8, d9, d10}
VFPv3 registers
.vsave {d15, d16, d17} vstm sp!, {d15, d16, d17}

Since FLDMX and FSTMX are now deprecated, this directive should be used in favour of .save for saving VFP registers for ARMv6 and above.