? .j.ld.swp
? j.ld
Index: asb2303.ld
===================================================================
RCS file: /cvs/src/src/libgloss/mn10300/asb2303.ld,v
retrieving revision 1.2
diff -c -r1.2 asb2303.ld
*** asb2303.ld	20 May 2005 15:45:43 -0000	1.2
--- asb2303.ld	2 Sep 2008 15:25:00 -0000
***************
*** 6,122 ****
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -lcygmon -lgcc)
!  SEARCH_DIR(.);
  STARTUP(crt0_cygmon.o)
- 
- /* Do we need any of these for elf?
-    __DYNAMIC = 0;    */
  SECTIONS
  {
    /* Read-only sections, merged into text segment: */
!   /* Start of RAM (leaving room for Cygmon data) */
!   . = 0x90080000;
! 
!   .interp     : { *(.interp) 	}
!   .hash          : { *(.hash)		}
!   .dynsym        : { *(.dynsym)		}
!   .dynstr        : { *(.dynstr)		}
!   .gnu.version   : { *(.gnu.version)	}
!   .gnu.version_d   : { *(.gnu.version_d)	}
!   .gnu.version_r   : { *(.gnu.version_r)	}
!   .rel.text      :
!     { *(.rel.text) *(.rel.gnu.linkonce.t*) }
!   .rela.text     :
!     { *(.rela.text) *(.rela.gnu.linkonce.t*) }
!   .rel.data      :
!     { *(.rel.data) *(.rel.gnu.linkonce.d*) }
!   .rela.data     :
!     { *(.rela.data) *(.rela.gnu.linkonce.d*) }
!   .rel.rodata    :
!     { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
!   .rela.rodata   :
!     { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
!   .rel.got       : { *(.rel.got)		}
!   .rela.got      : { *(.rela.got)		}
!   .rel.ctors     : { *(.rel.ctors)	}
!   .rela.ctors    : { *(.rela.ctors)	}
!   .rel.dtors     : { *(.rel.dtors)	}
!   .rela.dtors    : { *(.rela.dtors)	}
!   .rel.init      : { *(.rel.init)	}
!   .rela.init     : { *(.rela.init)	}
!   .rel.fini      : { *(.rel.fini)	}
!   .rela.fini     : { *(.rela.fini)	}
!   .rel.bss       : { *(.rel.bss)		}
!   .rela.bss      : { *(.rela.bss)		}
!   .rel.plt       : { *(.rel.plt)		}
!   .rela.plt      : { *(.rela.plt)		}
!   .init          : { *(.init)	} =0
!   .plt      : { *(.plt)	}
!   .text      :
    {
!     *(.text)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
-     *(.gnu.linkonce.t*)
-     *(.gcc_except_table)
    } =0
!   _etext = .;
    PROVIDE (etext = .);
!   .fini      : { *(.fini)    } =0
!   .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
!   .rodata1   : { *(.rodata1) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   .data    :
    {
!     *(.data)
!     *(.gnu.linkonce.d*)
!     CONSTRUCTORS
    }
!   .data1   : { *(.data1) }
!   .ctors         :
    {
      ___ctors = .;
!     KEEP(*crtbegin.o(.ctors))
!     KEEP(*(SORT(.ctors.*)))
!     KEEP(*(.ctors))
      ___ctors_end = .;
    }
!   .dtors         :
    {
      ___dtors = .;
!     KEEP(*crtbegin.o(.dtors))
!     KEEP(*(SORT(.dtors.*)))
!     KEEP(*(.dtors))
      ___dtors_end = .;
    }
!   .got           : { *(.got.plt) *(.got) }
!   .dynamic       : { *(.dynamic) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata     : { *(.sdata) }
!   _edata  =  .;
!   PROVIDE (edata = .);
    __bss_start = .;
!   .sbss      : { *(.sbss) *(.scommon) }
!   .bss       :
    {
     *(.dynbss)
!    *(.bss)
     *(COMMON)
    }
!   _end = . ;
!   PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab 0 : { *(.stab) }
!   .stabstr 0 : { *(.stabstr) }
!   .stab.excl 0 : { *(.stab.excl) }
!   .stab.exclstr 0 : { *(.stab.exclstr) }
!   .stab.index 0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment 0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
--- 6,199 ----
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -lcygmon -lgcc)
! SEARCH_DIR(.);
  STARTUP(crt0_cygmon.o)
  SECTIONS
  {
+   . = 90080000;
    /* Read-only sections, merged into text segment: */
!   PROVIDE (__executable_start = 0x0); . = 0x0;
!   .interp         : { *(.interp) }
!   .note.gnu.build-id : { *(.note.gnu.build-id) }
!   .hash           : { *(.hash) }
!   .gnu.hash       : { *(.gnu.hash) }
!   .dynsym         : { *(.dynsym) }
!   .dynstr         : { *(.dynstr) }
!   .gnu.version    : { *(.gnu.version) }
!   .gnu.version_d  : { *(.gnu.version_d) }
!   .gnu.version_r  : { *(.gnu.version_r) }
!   .rel.init       : { *(.rel.init) }
!   .rela.init      : { *(.rela.init) }
!   .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
!   .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
!   .rel.fini       : { *(.rel.fini) }
!   .rela.fini      : { *(.rela.fini) }
!   .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
!   .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
!   .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
!   .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
!   .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
!   .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
!   .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
!   .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
!   .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
!   .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
!   .rel.ctors      : { *(.rel.ctors) }
!   .rela.ctors     : { *(.rela.ctors) }
!   .rel.dtors      : { *(.rel.dtors) }
!   .rela.dtors     : { *(.rela.dtors) }
!   .rel.got        : { *(.rel.got) }
!   .rela.got       : { *(.rela.got) }
!   .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
!   .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
!   .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
!   .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
!   .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
!   .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
!   .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
!   .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
!   .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
!   .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
!   .rel.plt        : { *(.rel.plt) }
!   .rela.plt       : { *(.rela.plt) }
!   .init           :
    {
!     KEEP (*(.init))
!   } =0
!   .plt            : { *(.plt) }
!   .text           :
!   {
!     *(.text .stub .text.* .gnu.linkonce.t.*)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
    } =0
!   .fini           :
!   {
!     KEEP (*(.fini))
!   } =0
!   PROVIDE (__etext = .);
!   PROVIDE (_etext = .);
    PROVIDE (etext = .);
!   .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
!   .rodata1        : { *(.rodata1) }
!   .sdata2         :
!   {
!     *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
!   }
!   .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
!   .eh_frame_hdr : { *(.eh_frame_hdr) }
!   .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   /* Exception handling  */
!   .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
!   /* Thread Local Storage sections  */
!   .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
!   .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
!   .preinit_array     :
!   {
!     PROVIDE_HIDDEN (__preinit_array_start = .);
!     KEEP (*(.preinit_array))
!     PROVIDE_HIDDEN (__preinit_array_end = .);
!   }
!   .init_array     :
!   {
!      PROVIDE_HIDDEN (__init_array_start = .);
!      KEEP (*(SORT(.init_array.*)))
!      KEEP (*(.init_array))
!      PROVIDE_HIDDEN (__init_array_end = .);
!   }
!   .fini_array     :
    {
!     PROVIDE_HIDDEN (__fini_array_start = .);
!     KEEP (*(.fini_array))
!     KEEP (*(SORT(.fini_array.*)))
!     PROVIDE_HIDDEN (__fini_array_end = .);
    }
!   .ctors          :
    {
      ___ctors = .;
!     /* gcc uses crtbegin.o to find the start of
!        the constructors, so we make sure it is
!        first.  Because this is a wildcard, it
!        doesn't matter if the user does not
!        actually link against crtbegin.o; the
!        linker won't look for a file to match a
!        wildcard.  The wildcard also means that it
!        doesn't matter which directory crtbegin.o
!        is in.  */
!     KEEP (*crtbegin.o(.ctors))
!     KEEP (*crtbegin?.o(.ctors))
!     /* We don't want to include the .ctor section from
!        the crtend.o file until after the sorted ctors.
!        The .ctor section from the crtend file contains the
!        end of ctors marker and it must be last */
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
!     KEEP (*(SORT(.ctors.*)))
!     KEEP (*(.ctors))
      ___ctors_end = .;
    }
!   .dtors          :
    {
      ___dtors = .;
!     KEEP (*crtbegin.o(.dtors))
!     KEEP (*crtbegin?.o(.dtors))
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
!     KEEP (*(SORT(.dtors.*)))
!     KEEP (*(.dtors))
      ___dtors_end = .;
    }
!   .jcr            : { KEEP (*(.jcr)) }
!   .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
!   .dynamic        : { *(.dynamic) }
!   .data           :
!   {
!     *(.data .data.* .gnu.linkonce.d.*)
!     SORT(CONSTRUCTORS)
!   }
!   .data1          : { *(.data1) }
!   .got            : { *(.got.plt) *(.got) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata          :
!   {
!     *(.sdata .sdata.* .gnu.linkonce.s.*)
!   }
!   _edata = .; PROVIDE (edata = .);
    __bss_start = .;
!   .sbss           :
!   {
!     *(.dynsbss)
!     *(.sbss .sbss.* .gnu.linkonce.sb.*)
!     *(.scommon)
!   }
!   .bss            :
    {
     *(.dynbss)
!    *(.bss .bss.* .gnu.linkonce.b.*)
     *(COMMON)
+    /* Align here to ensure that the .bss section occupies space up to
+       _end.  Align after .bss to ensure correct alignment even if the
+       .bss section disappears because there are no input sections.
+       FIXME: Why do we need it? When there is no .bss section, we don't
+       pad the .data section.  */
+    . = ALIGN(. != 0 ? 32 / 8 : 1);
    }
!   . = ALIGN(32 / 8);
!   . = ALIGN(32 / 8);
!   _end = .; PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab          0 : { *(.stab) }
!   .stabstr       0 : { *(.stabstr) }
!   .stab.excl     0 : { *(.stab.excl) }
!   .stab.exclstr  0 : { *(.stab.exclstr) }
!   .stab.index    0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment       0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
***************
*** 130,151 ****
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
-   .debug_ranges   0 : { *(.debug_ranges) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
! 
!    /* Top of RAM is 0x48100000, but Cygmon uses the top 4K for its stack.  */
!   .stack 0x480ff000 : { _stack = .; *(.stack) *(._stack) }
! 
!   /* These must appear regardless of  .  */
  }
--- 207,234 ----
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
!   /* DWARF 3 */
!   .debug_pubtypes 0 : { *(.debug_pubtypes) }
!   .debug_ranges   0 : { *(.debug_ranges) }
!     /* Top of RAM is 0x48100000, but Cygmon uses the top 4K for its stack.  */
!    .stack         0x480ff000 :
!   {
!     _stack = .;
!     *(.stack)
!     *(._stack)
!   }
!   .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
!   /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }
  }
Index: asb2305.ld
===================================================================
RCS file: /cvs/src/src/libgloss/mn10300/asb2305.ld,v
retrieving revision 1.2
diff -c -r1.2 asb2305.ld
*** asb2305.ld	20 May 2005 15:45:43 -0000	1.2
--- asb2305.ld	2 Sep 2008 15:25:00 -0000
***************
*** 6,122 ****
  OUTPUT_ARCH(am33-2)
  ENTRY(_start)
  GROUP(-lc -lcygmon -lgcc)
-  SEARCH_DIR(.);
  STARTUP(crt0_redboot.o)
! 
! /* Do we need any of these for elf?
!    __DYNAMIC = 0;    */
  SECTIONS
  {
    /* Read-only sections, merged into text segment: */
!   /* Start of RAM (leaving room for RedBoot data) */
!   . = 0x90700000;
! 
!   .interp     : { *(.interp) 	}
!   .hash          : { *(.hash)		}
!   .dynsym        : { *(.dynsym)		}
!   .dynstr        : { *(.dynstr)		}
!   .gnu.version   : { *(.gnu.version)	}
!   .gnu.version_d   : { *(.gnu.version_d)	}
!   .gnu.version_r   : { *(.gnu.version_r)	}
!   .rel.text      :
!     { *(.rel.text) *(.rel.gnu.linkonce.t*) }
!   .rela.text     :
!     { *(.rela.text) *(.rela.gnu.linkonce.t*) }
!   .rel.data      :
!     { *(.rel.data) *(.rel.gnu.linkonce.d*) }
!   .rela.data     :
!     { *(.rela.data) *(.rela.gnu.linkonce.d*) }
!   .rel.rodata    :
!     { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
!   .rela.rodata   :
!     { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
!   .rel.got       : { *(.rel.got)		}
!   .rela.got      : { *(.rela.got)		}
!   .rel.ctors     : { *(.rel.ctors)	}
!   .rela.ctors    : { *(.rela.ctors)	}
!   .rel.dtors     : { *(.rel.dtors)	}
!   .rela.dtors    : { *(.rela.dtors)	}
!   .rel.init      : { *(.rel.init)	}
!   .rela.init     : { *(.rela.init)	}
!   .rel.fini      : { *(.rel.fini)	}
!   .rela.fini     : { *(.rela.fini)	}
!   .rel.bss       : { *(.rel.bss)		}
!   .rela.bss      : { *(.rela.bss)		}
!   .rel.plt       : { *(.rel.plt)		}
!   .rela.plt      : { *(.rela.plt)		}
!   .init          : { *(.init)	} =0
!   .plt      : { *(.plt)	}
!   .text      :
    {
!     *(.text)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
-     *(.gnu.linkonce.t*)
-     *(.gcc_except_table)
    } =0
!   _etext = .;
    PROVIDE (etext = .);
!   .fini      : { *(.fini)    } =0
!   .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
!   .rodata1   : { *(.rodata1) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   .data    :
    {
!     *(.data)
!     *(.gnu.linkonce.d*)
!     CONSTRUCTORS
    }
!   .data1   : { *(.data1) }
!   .ctors         :
    {
      ___ctors = .;
!     KEEP(*crtbegin.o(.ctors))
!     KEEP(*(SORT(.ctors.*)))
!     KEEP(*(.ctors))
      ___ctors_end = .;
    }
!   .dtors         :
    {
      ___dtors = .;
!     KEEP(*crtbegin.o(.dtors))
!     KEEP(*(SORT(.dtors.*)))
!     KEEP(*(.dtors))
      ___dtors_end = .;
    }
!   .got           : { *(.got.plt) *(.got) }
!   .dynamic       : { *(.dynamic) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata     : { *(.sdata) }
!   _edata  =  .;
!   PROVIDE (edata = .);
    __bss_start = .;
!   .sbss      : { *(.sbss) *(.scommon) }
!   .bss       :
    {
     *(.dynbss)
!    *(.bss)
     *(COMMON)
    }
!   _end = . ;
!   PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab 0 : { *(.stab) }
!   .stabstr 0 : { *(.stabstr) }
!   .stab.excl 0 : { *(.stab.excl) }
!   .stab.exclstr 0 : { *(.stab.exclstr) }
!   .stab.index 0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment 0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
--- 6,199 ----
  OUTPUT_ARCH(am33-2)
  ENTRY(_start)
  GROUP(-lc -lcygmon -lgcc)
  STARTUP(crt0_redboot.o)
! SEARCH_DIR(.);
  SECTIONS
  {
+   . = 90700000;
    /* Read-only sections, merged into text segment: */
!   PROVIDE (__executable_start = 0x0); . = 0x0;
!   .interp         : { *(.interp) }
!   .note.gnu.build-id : { *(.note.gnu.build-id) }
!   .hash           : { *(.hash) }
!   .gnu.hash       : { *(.gnu.hash) }
!   .dynsym         : { *(.dynsym) }
!   .dynstr         : { *(.dynstr) }
!   .gnu.version    : { *(.gnu.version) }
!   .gnu.version_d  : { *(.gnu.version_d) }
!   .gnu.version_r  : { *(.gnu.version_r) }
!   .rel.init       : { *(.rel.init) }
!   .rela.init      : { *(.rela.init) }
!   .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
!   .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
!   .rel.fini       : { *(.rel.fini) }
!   .rela.fini      : { *(.rela.fini) }
!   .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
!   .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
!   .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
!   .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
!   .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
!   .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
!   .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
!   .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
!   .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
!   .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
!   .rel.ctors      : { *(.rel.ctors) }
!   .rela.ctors     : { *(.rela.ctors) }
!   .rel.dtors      : { *(.rel.dtors) }
!   .rela.dtors     : { *(.rela.dtors) }
!   .rel.got        : { *(.rel.got) }
!   .rela.got       : { *(.rela.got) }
!   .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
!   .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
!   .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
!   .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
!   .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
!   .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
!   .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
!   .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
!   .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
!   .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
!   .rel.plt        : { *(.rel.plt) }
!   .rela.plt       : { *(.rela.plt) }
!   .init           :
    {
!     KEEP (*(.init))
!   } =0
!   .plt            : { *(.plt) }
!   .text           :
!   {
!     *(.text .stub .text.* .gnu.linkonce.t.*)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
    } =0
!   .fini           :
!   {
!     KEEP (*(.fini))
!   } =0
!   PROVIDE (__etext = .);
!   PROVIDE (_etext = .);
    PROVIDE (etext = .);
!   .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
!   .rodata1        : { *(.rodata1) }
!   .sdata2         :
!   {
!     *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
!   }
!   .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
!   .eh_frame_hdr : { *(.eh_frame_hdr) }
!   .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   /* Exception handling  */
!   .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
!   /* Thread Local Storage sections  */
!   .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
!   .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
!   .preinit_array     :
!   {
!     PROVIDE_HIDDEN (__preinit_array_start = .);
!     KEEP (*(.preinit_array))
!     PROVIDE_HIDDEN (__preinit_array_end = .);
!   }
!   .init_array     :
!   {
!      PROVIDE_HIDDEN (__init_array_start = .);
!      KEEP (*(SORT(.init_array.*)))
!      KEEP (*(.init_array))
!      PROVIDE_HIDDEN (__init_array_end = .);
!   }
!   .fini_array     :
    {
!     PROVIDE_HIDDEN (__fini_array_start = .);
!     KEEP (*(.fini_array))
!     KEEP (*(SORT(.fini_array.*)))
!     PROVIDE_HIDDEN (__fini_array_end = .);
    }
!   .ctors          :
    {
      ___ctors = .;
!     /* gcc uses crtbegin.o to find the start of
!        the constructors, so we make sure it is
!        first.  Because this is a wildcard, it
!        doesn't matter if the user does not
!        actually link against crtbegin.o; the
!        linker won't look for a file to match a
!        wildcard.  The wildcard also means that it
!        doesn't matter which directory crtbegin.o
!        is in.  */
!     KEEP (*crtbegin.o(.ctors))
!     KEEP (*crtbegin?.o(.ctors))
!     /* We don't want to include the .ctor section from
!        the crtend.o file until after the sorted ctors.
!        The .ctor section from the crtend file contains the
!        end of ctors marker and it must be last */
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
!     KEEP (*(SORT(.ctors.*)))
!     KEEP (*(.ctors))
      ___ctors_end = .;
    }
!   .dtors          :
    {
      ___dtors = .;
!     KEEP (*crtbegin.o(.dtors))
!     KEEP (*crtbegin?.o(.dtors))
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
!     KEEP (*(SORT(.dtors.*)))
!     KEEP (*(.dtors))
      ___dtors_end = .;
    }
!   .jcr            : { KEEP (*(.jcr)) }
!   .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
!   .dynamic        : { *(.dynamic) }
!   .data           :
!   {
!     *(.data .data.* .gnu.linkonce.d.*)
!     SORT(CONSTRUCTORS)
!   }
!   .data1          : { *(.data1) }
!   .got            : { *(.got.plt) *(.got) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata          :
!   {
!     *(.sdata .sdata.* .gnu.linkonce.s.*)
!   }
!   _edata = .; PROVIDE (edata = .);
    __bss_start = .;
!   .sbss           :
!   {
!     *(.dynsbss)
!     *(.sbss .sbss.* .gnu.linkonce.sb.*)
!     *(.scommon)
!   }
!   .bss            :
    {
     *(.dynbss)
!    *(.bss .bss.* .gnu.linkonce.b.*)
     *(COMMON)
+    /* Align here to ensure that the .bss section occupies space up to
+       _end.  Align after .bss to ensure correct alignment even if the
+       .bss section disappears because there are no input sections.
+       FIXME: Why do we need it? When there is no .bss section, we don't
+       pad the .data section.  */
+    . = ALIGN(. != 0 ? 32 / 8 : 1);
    }
!   . = ALIGN(32 / 8);
!   . = ALIGN(32 / 8);
!   _end = .; PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab          0 : { *(.stab) }
!   .stabstr       0 : { *(.stabstr) }
!   .stab.excl     0 : { *(.stab.excl) }
!   .stab.exclstr  0 : { *(.stab.exclstr) }
!   .stab.index    0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment       0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
***************
*** 130,151 ****
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
-   .debug_ranges   0 : { *(.debug_ranges) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
! 
!    /* Top of usable RAM is 0x91000000  */
!   .stack 0x91000000 : { _stack = .; *(.stack) *(._stack) }
! 
!   /* These must appear regardless of  .  */
  }
--- 207,233 ----
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
!   /* DWARF 3 */
!   .debug_pubtypes 0 : { *(.debug_pubtypes) }
!   .debug_ranges   0 : { *(.debug_ranges) }
!     .stack         0x91000000  :
!   {
!     _stack = .;
!     *(.stack)
!     *(._stack)
!   }
!   .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
!   /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }
  }
Index: eval.ld
===================================================================
RCS file: /cvs/src/src/libgloss/mn10300/eval.ld,v
retrieving revision 1.2
diff -c -r1.2 eval.ld
*** eval.ld	20 May 2005 15:45:43 -0000	1.2
--- eval.ld	2 Sep 2008 15:25:00 -0000
***************
*** 8,122 ****
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -leval -lgcc)
!  SEARCH_DIR(.);
! /* Do we need any of these for elf?
!    __DYNAMIC = 0;    */
  SECTIONS
  {
    /* Read-only sections, merged into text segment: */
!   /* Start of RAM (leaving room for Cygmon data) */
!   . = 0x48008000;
! 
!   .interp     : { *(.interp) 	}
!   .hash          : { *(.hash)		}
!   .dynsym        : { *(.dynsym)		}
!   .dynstr        : { *(.dynstr)		}
!   .gnu.version   : { *(.gnu.version)	}
!   .gnu.version_d   : { *(.gnu.version_d)	}
!   .gnu.version_r   : { *(.gnu.version_r)	}
!   .rel.text      :
!     { *(.rel.text) *(.rel.gnu.linkonce.t*) }
!   .rela.text     :
!     { *(.rela.text) *(.rela.gnu.linkonce.t*) }
!   .rel.data      :
!     { *(.rel.data) *(.rel.gnu.linkonce.d*) }
!   .rela.data     :
!     { *(.rela.data) *(.rela.gnu.linkonce.d*) }
!   .rel.rodata    :
!     { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
!   .rela.rodata   :
!     { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
!   .rel.got       : { *(.rel.got)		}
!   .rela.got      : { *(.rela.got)		}
!   .rel.ctors     : { *(.rel.ctors)	}
!   .rela.ctors    : { *(.rela.ctors)	}
!   .rel.dtors     : { *(.rel.dtors)	}
!   .rela.dtors    : { *(.rela.dtors)	}
!   .rel.init      : { *(.rel.init)	}
!   .rela.init     : { *(.rela.init)	}
!   .rel.fini      : { *(.rel.fini)	}
!   .rela.fini     : { *(.rela.fini)	}
!   .rel.bss       : { *(.rel.bss)		}
!   .rela.bss      : { *(.rela.bss)		}
!   .rel.plt       : { *(.rel.plt)		}
!   .rela.plt      : { *(.rela.plt)		}
!   .init          : { *(.init)	} =0
!   .plt      : { *(.plt)	}
!   .text      :
    {
!     *(.text)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
-     *(.gnu.linkonce.t*)
-     *(.gcc_except_table)
    } =0
!   _etext = .;
    PROVIDE (etext = .);
!   .fini      : { *(.fini)    } =0
!   .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
!   .rodata1   : { *(.rodata1) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   .data    :
    {
!     *(.data)
!     *(.gnu.linkonce.d*)
!     CONSTRUCTORS
    }
!   .data1   : { *(.data1) }
!   .ctors         :
    {
      ___ctors = .;
!     KEEP(*crtbegin.o(.ctors))
!     KEEP(*(SORT(.ctors.*)))
!     KEEP(*(.ctors))
      ___ctors_end = .;
    }
!   .dtors         :
    {
      ___dtors = .;
!     KEEP(*crtbegin.o(.dtors))
!     KEEP(*(SORT(.dtors.*)))
!     KEEP(*(.dtors))
      ___dtors_end = .;
    }
!   .got           : { *(.got.plt) *(.got) }
!   .dynamic       : { *(.dynamic) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata     : { *(.sdata) }
!   _edata  =  .;
!   PROVIDE (edata = .);
    __bss_start = .;
!   .sbss      : { *(.sbss) *(.scommon) }
!   .bss       :
    {
     *(.dynbss)
!    *(.bss)
     *(COMMON)
    }
!   _end = . ;
!   PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab 0 : { *(.stab) }
!   .stabstr 0 : { *(.stabstr) }
!   .stab.excl 0 : { *(.stab.excl) }
!   .stab.exclstr 0 : { *(.stab.exclstr) }
!   .stab.index 0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment 0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
--- 8,200 ----
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -leval -lgcc)
! SEARCH_DIR(.);
  SECTIONS
  {
+   . = 48008000;
    /* Read-only sections, merged into text segment: */
!   PROVIDE (__executable_start = 0x0); . = 0x0;
!   .interp         : { *(.interp) }
!   .note.gnu.build-id : { *(.note.gnu.build-id) }
!   .hash           : { *(.hash) }
!   .gnu.hash       : { *(.gnu.hash) }
!   .dynsym         : { *(.dynsym) }
!   .dynstr         : { *(.dynstr) }
!   .gnu.version    : { *(.gnu.version) }
!   .gnu.version_d  : { *(.gnu.version_d) }
!   .gnu.version_r  : { *(.gnu.version_r) }
!   .rel.init       : { *(.rel.init) }
!   .rela.init      : { *(.rela.init) }
!   .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
!   .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
!   .rel.fini       : { *(.rel.fini) }
!   .rela.fini      : { *(.rela.fini) }
!   .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
!   .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
!   .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
!   .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
!   .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
!   .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
!   .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
!   .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
!   .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
!   .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
!   .rel.ctors      : { *(.rel.ctors) }
!   .rela.ctors     : { *(.rela.ctors) }
!   .rel.dtors      : { *(.rel.dtors) }
!   .rela.dtors     : { *(.rela.dtors) }
!   .rel.got        : { *(.rel.got) }
!   .rela.got       : { *(.rela.got) }
!   .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
!   .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
!   .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
!   .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
!   .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
!   .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
!   .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
!   .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
!   .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
!   .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
!   .rel.plt        : { *(.rel.plt) }
!   .rela.plt       : { *(.rela.plt) }
!   .init           :
    {
!     KEEP (*(.init))
!   } =0
!   .plt            : { *(.plt) }
!   .text           :
!   {
!     *(.text .stub .text.* .gnu.linkonce.t.*)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
    } =0
!   .fini           :
!   {
!     KEEP (*(.fini))
!   } =0
!   PROVIDE (__etext = .);
!   PROVIDE (_etext = .);
    PROVIDE (etext = .);
!   .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
!   .rodata1        : { *(.rodata1) }
!   .sdata2         :
!   {
!     *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
!   }
!   .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
!   .eh_frame_hdr : { *(.eh_frame_hdr) }
!   .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   /* Exception handling  */
!   .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
!   /* Thread Local Storage sections  */
!   .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
!   .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
!   .preinit_array     :
!   {
!     PROVIDE_HIDDEN (__preinit_array_start = .);
!     KEEP (*(.preinit_array))
!     PROVIDE_HIDDEN (__preinit_array_end = .);
!   }
!   .init_array     :
!   {
!      PROVIDE_HIDDEN (__init_array_start = .);
!      KEEP (*(SORT(.init_array.*)))
!      KEEP (*(.init_array))
!      PROVIDE_HIDDEN (__init_array_end = .);
!   }
!   .fini_array     :
    {
!     PROVIDE_HIDDEN (__fini_array_start = .);
!     KEEP (*(.fini_array))
!     KEEP (*(SORT(.fini_array.*)))
!     PROVIDE_HIDDEN (__fini_array_end = .);
    }
!   .ctors          :
    {
      ___ctors = .;
!     /* gcc uses crtbegin.o to find the start of
!        the constructors, so we make sure it is
!        first.  Because this is a wildcard, it
!        doesn't matter if the user does not
!        actually link against crtbegin.o; the
!        linker won't look for a file to match a
!        wildcard.  The wildcard also means that it
!        doesn't matter which directory crtbegin.o
!        is in.  */
!     KEEP (*crtbegin.o(.ctors))
!     KEEP (*crtbegin?.o(.ctors))
!     /* We don't want to include the .ctor section from
!        the crtend.o file until after the sorted ctors.
!        The .ctor section from the crtend file contains the
!        end of ctors marker and it must be last */
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
!     KEEP (*(SORT(.ctors.*)))
!     KEEP (*(.ctors))
      ___ctors_end = .;
    }
!   .dtors          :
    {
      ___dtors = .;
!     KEEP (*crtbegin.o(.dtors))
!     KEEP (*crtbegin?.o(.dtors))
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
!     KEEP (*(SORT(.dtors.*)))
!     KEEP (*(.dtors))
      ___dtors_end = .;
    }
!   .jcr            : { KEEP (*(.jcr)) }
!   .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
!   .dynamic        : { *(.dynamic) }
!   .data           :
!   {
!     *(.data .data.* .gnu.linkonce.d.*)
!     SORT(CONSTRUCTORS)
!   }
!   .data1          : { *(.data1) }
!   .got            : { *(.got.plt) *(.got) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata          :
!   {
!     *(.sdata .sdata.* .gnu.linkonce.s.*)
!   }
!   _edata = .; PROVIDE (edata = .);
    __bss_start = .;
!   .sbss           :
!   {
!     *(.dynsbss)
!     *(.sbss .sbss.* .gnu.linkonce.sb.*)
!     *(.scommon)
!   }
!   .bss            :
    {
     *(.dynbss)
!    *(.bss .bss.* .gnu.linkonce.b.*)
     *(COMMON)
+    /* Align here to ensure that the .bss section occupies space up to
+       _end.  Align after .bss to ensure correct alignment even if the
+       .bss section disappears because there are no input sections.
+       FIXME: Why do we need it? When there is no .bss section, we don't
+       pad the .data section.  */
+    . = ALIGN(. != 0 ? 32 / 8 : 1);
    }
!   . = ALIGN(32 / 8);
!   . = ALIGN(32 / 8);
!   _end = .; PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab          0 : { *(.stab) }
!   .stabstr       0 : { *(.stabstr) }
!   .stab.excl     0 : { *(.stab.excl) }
!   .stab.exclstr  0 : { *(.stab.exclstr) }
!   .stab.index    0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment       0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
***************
*** 130,151 ****
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
-   .debug_ranges   0 : { *(.debug_ranges) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
! 
!    /* Top of RAM is 0x48100000, but Cygmon uses the top 4K for its stack.  */
!   .stack 0x480ff000 : { _stack = .; *(.stack) *(._stack) }
! 
!   /* These must appear regardless of  .  */
  }
--- 208,235 ----
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
!   /* DWARF 3 */
!   .debug_pubtypes 0 : { *(.debug_pubtypes) }
!   .debug_ranges   0 : { *(.debug_ranges) }
!   /* Top of RAM is 0x48100000, but Cygmon uses the top 4K for its stack.  */
!   .stack         0x480ff000 :
!   {
!     _stack = .;
!     *(.stack)
!     *(._stack)
!   }
!   .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
!   /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }
  }
Index: sim.ld
===================================================================
RCS file: /cvs/src/src/libgloss/mn10300/sim.ld,v
retrieving revision 1.3
diff -c -r1.3 sim.ld
*** sim.ld	20 May 2005 15:45:43 -0000	1.3
--- sim.ld	2 Sep 2008 15:25:00 -0000
***************
*** 6,120 ****
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -leval -lgcc)
!  SEARCH_DIR(.);
! /* Do we need any of these for elf?
!    __DYNAMIC = 0;    */
  SECTIONS
  {
-   /* Read-only sections, merged into text segment: */
-   /* Start of RAM (leaving room for Cygmon data) */
    . = 4;
! 
!   .interp     : { *(.interp) 	}
!   .hash          : { *(.hash)		}
!   .dynsym        : { *(.dynsym)		}
!   .dynstr        : { *(.dynstr)		}
!   .gnu.version   : { *(.gnu.version)	}
!   .gnu.version_d   : { *(.gnu.version_d)	}
!   .gnu.version_r   : { *(.gnu.version_r)	}
!   .rel.text      :
!     { *(.rel.text) *(.rel.gnu.linkonce.t*) }
!   .rela.text     :
!     { *(.rela.text) *(.rela.gnu.linkonce.t*) }
!   .rel.data      :
!     { *(.rel.data) *(.rel.gnu.linkonce.d*) }
!   .rela.data     :
!     { *(.rela.data) *(.rela.gnu.linkonce.d*) }
!   .rel.rodata    :
!     { *(.rel.rodata) *(.rel.gnu.linkonce.r*) }
!   .rela.rodata   :
!     { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
!   .rel.got       : { *(.rel.got)		}
!   .rela.got      : { *(.rela.got)		}
!   .rel.ctors     : { *(.rel.ctors)	}
!   .rela.ctors    : { *(.rela.ctors)	}
!   .rel.dtors     : { *(.rel.dtors)	}
!   .rela.dtors    : { *(.rela.dtors)	}
!   .rel.init      : { *(.rel.init)	}
!   .rela.init     : { *(.rela.init)	}
!   .rel.fini      : { *(.rel.fini)	}
!   .rela.fini     : { *(.rela.fini)	}
!   .rel.bss       : { *(.rel.bss)		}
!   .rela.bss      : { *(.rela.bss)		}
!   .rel.plt       : { *(.rel.plt)		}
!   .rela.plt      : { *(.rela.plt)		}
!   .init          : { *(.init)	} =0
!   .plt      : { *(.plt)	}
!   .text      :
    {
!     *(.text)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
-     *(.gnu.linkonce.t*)
-     *(.gcc_except_table)
    } =0
!   _etext = .;
    PROVIDE (etext = .);
!   .fini      : { *(.fini)    } =0
!   .rodata    : { *(.rodata) *(.gnu.linkonce.r*) }
!   .rodata1   : { *(.rodata1) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   .data    :
    {
!     *(.data)
!     *(.gnu.linkonce.d*)
!     CONSTRUCTORS
    }
!   .data1   : { *(.data1) }
!   .ctors         :
    {
      ___ctors = .;
!     KEEP(*crtbegin.o(.ctors))
!     KEEP(*(SORT(.ctors.*)))
!     KEEP(*(.ctors))
      ___ctors_end = .;
    }
!   .dtors         :
    {
      ___dtors = .;
!     KEEP(*crtbegin.o(.dtors))
!     KEEP(*(SORT(.dtors.*)))
!     KEEP(*(.dtors))
      ___dtors_end = .;
    }
!   .got           : { *(.got.plt) *(.got) }
!   .dynamic       : { *(.dynamic) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata     : { *(.sdata) }
!   _edata  =  .;
!   PROVIDE (edata = .);
    __bss_start = .;
!   .sbss      : { *(.sbss) *(.scommon) }
!   .bss       :
    {
     *(.dynbss)
!    *(.bss)
     *(COMMON)
    }
!   _end = . ;
!   PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab 0 : { *(.stab) }
!   .stabstr 0 : { *(.stabstr) }
!   .stab.excl 0 : { *(.stab.excl) }
!   .stab.exclstr 0 : { *(.stab.exclstr) }
!   .stab.index 0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment 0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
--- 6,198 ----
  OUTPUT_ARCH(mn10300)
  ENTRY(_start)
  GROUP(-lc -leval -lgcc)
! SEARCH_DIR(.);
  SECTIONS
  {
    . = 4;
!   /* Read-only sections, merged into text segment: */
!   PROVIDE (__executable_start = 0x0); . = 0x0;
!   .interp         : { *(.interp) }
!   .note.gnu.build-id : { *(.note.gnu.build-id) }
!   .hash           : { *(.hash) }
!   .gnu.hash       : { *(.gnu.hash) }
!   .dynsym         : { *(.dynsym) }
!   .dynstr         : { *(.dynstr) }
!   .gnu.version    : { *(.gnu.version) }
!   .gnu.version_d  : { *(.gnu.version_d) }
!   .gnu.version_r  : { *(.gnu.version_r) }
!   .rel.init       : { *(.rel.init) }
!   .rela.init      : { *(.rela.init) }
!   .rel.text       : { *(.rel.text .rel.text.* .rel.gnu.linkonce.t.*) }
!   .rela.text      : { *(.rela.text .rela.text.* .rela.gnu.linkonce.t.*) }
!   .rel.fini       : { *(.rel.fini) }
!   .rela.fini      : { *(.rela.fini) }
!   .rel.rodata     : { *(.rel.rodata .rel.rodata.* .rel.gnu.linkonce.r.*) }
!   .rela.rodata    : { *(.rela.rodata .rela.rodata.* .rela.gnu.linkonce.r.*) }
!   .rel.data.rel.ro   : { *(.rel.data.rel.ro* .rel.gnu.linkonce.d.rel.ro.*) }
!   .rela.data.rel.ro   : { *(.rela.data.rel.ro* .rela.gnu.linkonce.d.rel.ro.*) }
!   .rel.data       : { *(.rel.data .rel.data.* .rel.gnu.linkonce.d.*) }
!   .rela.data      : { *(.rela.data .rela.data.* .rela.gnu.linkonce.d.*) }
!   .rel.tdata	  : { *(.rel.tdata .rel.tdata.* .rel.gnu.linkonce.td.*) }
!   .rela.tdata	  : { *(.rela.tdata .rela.tdata.* .rela.gnu.linkonce.td.*) }
!   .rel.tbss	  : { *(.rel.tbss .rel.tbss.* .rel.gnu.linkonce.tb.*) }
!   .rela.tbss	  : { *(.rela.tbss .rela.tbss.* .rela.gnu.linkonce.tb.*) }
!   .rel.ctors      : { *(.rel.ctors) }
!   .rela.ctors     : { *(.rela.ctors) }
!   .rel.dtors      : { *(.rel.dtors) }
!   .rela.dtors     : { *(.rela.dtors) }
!   .rel.got        : { *(.rel.got) }
!   .rela.got       : { *(.rela.got) }
!   .rel.sdata      : { *(.rel.sdata .rel.sdata.* .rel.gnu.linkonce.s.*) }
!   .rela.sdata     : { *(.rela.sdata .rela.sdata.* .rela.gnu.linkonce.s.*) }
!   .rel.sbss       : { *(.rel.sbss .rel.sbss.* .rel.gnu.linkonce.sb.*) }
!   .rela.sbss      : { *(.rela.sbss .rela.sbss.* .rela.gnu.linkonce.sb.*) }
!   .rel.sdata2     : { *(.rel.sdata2 .rel.sdata2.* .rel.gnu.linkonce.s2.*) }
!   .rela.sdata2    : { *(.rela.sdata2 .rela.sdata2.* .rela.gnu.linkonce.s2.*) }
!   .rel.sbss2      : { *(.rel.sbss2 .rel.sbss2.* .rel.gnu.linkonce.sb2.*) }
!   .rela.sbss2     : { *(.rela.sbss2 .rela.sbss2.* .rela.gnu.linkonce.sb2.*) }
!   .rel.bss        : { *(.rel.bss .rel.bss.* .rel.gnu.linkonce.b.*) }
!   .rela.bss       : { *(.rela.bss .rela.bss.* .rela.gnu.linkonce.b.*) }
!   .rel.plt        : { *(.rel.plt) }
!   .rela.plt       : { *(.rela.plt) }
!   .init           :
!   {
!     KEEP (*(.init))
!   } =0
!   .plt            : { *(.plt) }
!   .text           :
    {
!     *(.text .stub .text.* .gnu.linkonce.t.*)
      /* .gnu.warning sections are handled specially by elf32.em.  */
      *(.gnu.warning)
    } =0
!   .fini           :
!   {
!     KEEP (*(.fini))
!   } =0
!   PROVIDE (__etext = .);
!   PROVIDE (_etext = .);
    PROVIDE (etext = .);
!   .rodata         : { *(.rodata .rodata.* .gnu.linkonce.r.*) }
!   .rodata1        : { *(.rodata1) }
!   .sdata2         :
!   {
!     *(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
!   }
!   .sbss2          : { *(.sbss2 .sbss2.* .gnu.linkonce.sb2.*) }
!   .eh_frame_hdr : { *(.eh_frame_hdr) }
!   .eh_frame       : ONLY_IF_RO { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
    /* Adjust the address for the data segment.  We want to adjust up to
       the same address within the page on the next page up.  */
    . = ALIGN(1) + (. & (1 - 1));
!   /* Exception handling  */
!   .eh_frame       : ONLY_IF_RW { KEEP (*(.eh_frame)) }
!   .gcc_except_table   : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
!   /* Thread Local Storage sections  */
!   .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
!   .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
!   .preinit_array     :
!   {
!     PROVIDE_HIDDEN (__preinit_array_start = .);
!     KEEP (*(.preinit_array))
!     PROVIDE_HIDDEN (__preinit_array_end = .);
!   }
!   .init_array     :
!   {
!      PROVIDE_HIDDEN (__init_array_start = .);
!      KEEP (*(SORT(.init_array.*)))
!      KEEP (*(.init_array))
!      PROVIDE_HIDDEN (__init_array_end = .);
!   }
!   .fini_array     :
    {
!     PROVIDE_HIDDEN (__fini_array_start = .);
!     KEEP (*(.fini_array))
!     KEEP (*(SORT(.fini_array.*)))
!     PROVIDE_HIDDEN (__fini_array_end = .);
    }
!   .ctors          :
    {
      ___ctors = .;
!     /* gcc uses crtbegin.o to find the start of
!        the constructors, so we make sure it is
!        first.  Because this is a wildcard, it
!        doesn't matter if the user does not
!        actually link against crtbegin.o; the
!        linker won't look for a file to match a
!        wildcard.  The wildcard also means that it
!        doesn't matter which directory crtbegin.o
!        is in.  */
!     KEEP (*crtbegin.o(.ctors))
!     KEEP (*crtbegin?.o(.ctors))
!     /* We don't want to include the .ctor section from
!        the crtend.o file until after the sorted ctors.
!        The .ctor section from the crtend file contains the
!        end of ctors marker and it must be last */
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .ctors))
!     KEEP (*(SORT(.ctors.*)))
!     KEEP (*(.ctors))
      ___ctors_end = .;
    }
!   .dtors          :
    {
      ___dtors = .;
!     KEEP (*crtbegin.o(.dtors))
!     KEEP (*crtbegin?.o(.dtors))
!     KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o ) .dtors))
!     KEEP (*(SORT(.dtors.*)))
!     KEEP (*(.dtors))
      ___dtors_end = .;
    }
!   .jcr            : { KEEP (*(.jcr)) }
!   .data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }
!   .dynamic        : { *(.dynamic) }
!   .data           :
!   {
!     *(.data .data.* .gnu.linkonce.d.*)
!     SORT(CONSTRUCTORS)
!   }
!   .data1          : { *(.data1) }
!   .got            : { *(.got.plt) *(.got) }
    /* We want the small data sections together, so single-instruction offsets
       can access them all, and initialized data all before uninitialized, so
       we can shorten the on-disk segment size.  */
!   .sdata          :
!   {
!     *(.sdata .sdata.* .gnu.linkonce.s.*)
!   }
!   _edata = .; PROVIDE (edata = .);
    __bss_start = .;
!   .sbss           :
!   {
!     *(.dynsbss)
!     *(.sbss .sbss.* .gnu.linkonce.sb.*)
!     *(.scommon)
!   }
!   .bss            :
    {
     *(.dynbss)
!    *(.bss .bss.* .gnu.linkonce.b.*)
     *(COMMON)
+    /* Align here to ensure that the .bss section occupies space up to
+       _end.  Align after .bss to ensure correct alignment even if the
+       .bss section disappears because there are no input sections.
+       FIXME: Why do we need it? When there is no .bss section, we don't
+       pad the .data section.  */
+    . = ALIGN(. != 0 ? 32 / 8 : 1);
    }
!   . = ALIGN(32 / 8);
!   . = ALIGN(32 / 8);
!   _end = .; PROVIDE (end = .);
    /* Stabs debugging sections.  */
!   .stab          0 : { *(.stab) }
!   .stabstr       0 : { *(.stabstr) }
!   .stab.excl     0 : { *(.stab.excl) }
!   .stab.exclstr  0 : { *(.stab.exclstr) }
!   .stab.index    0 : { *(.stab.index) }
    .stab.indexstr 0 : { *(.stab.indexstr) }
!   .comment       0 : { *(.comment) }
    /* DWARF debug sections.
       Symbols in the DWARF debugging sections are relative to the beginning
       of the section so we begin them at 0.  */
***************
*** 128,148 ****
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
-   .debug_ranges   0 : { *(.debug_ranges) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
! 
!   .stack 0x80000 : { _stack = .; *(.stack) *(._stack) }
! 
!   /* These must appear regardless of  .  */
  }
--- 206,231 ----
    .debug_aranges  0 : { *(.debug_aranges) }
    .debug_pubnames 0 : { *(.debug_pubnames) }
    /* DWARF 2 */
!   .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
    .debug_abbrev   0 : { *(.debug_abbrev) }
    .debug_line     0 : { *(.debug_line) }
    .debug_frame    0 : { *(.debug_frame) }
    .debug_str      0 : { *(.debug_str) }
    .debug_loc      0 : { *(.debug_loc) }
    .debug_macinfo  0 : { *(.debug_macinfo) }
    /* SGI/MIPS DWARF 2 extensions */
    .debug_weaknames 0 : { *(.debug_weaknames) }
    .debug_funcnames 0 : { *(.debug_funcnames) }
    .debug_typenames 0 : { *(.debug_typenames) }
    .debug_varnames  0 : { *(.debug_varnames) }
!   /* DWARF 3 */
!   .debug_pubtypes 0 : { *(.debug_pubtypes) }
!   .debug_ranges   0 : { *(.debug_ranges) }
!     .stack         0x80000 :
!   {
!     _stack = .;
!     *(.stack)
!   }
!   .gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }
!   /DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }
  }