[newlib-cygwin] Initialize SVE system registers.

[Richard Earnshaw <rearnsha at sourceware dot org>]

https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=9a7f131e0e4dcb4833c4b5eb8c04643a05c3c7e3

commit 9a7f131e0e4dcb4833c4b5eb8c04643a05c3c7e3
Author: Tamar Christina <tamar.christina@arm.com>
Date:   Fri Oct 26 10:18:17 2018 +0100

    Initialize SVE system registers.
    
    This patch initializes the SVE system registers if available
    and initializes the vector length to the maximum supported.
    
    This is done according to the SVE specification [1].
    
    [1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a

Diff:
---
 libgloss/aarch64/cpu-init/rdimon-aem-el3.S | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/libgloss/aarch64/cpu-init/rdimon-aem-el3.S b/libgloss/aarch64/cpu-init/rdimon-aem-el3.S
index 9edbccd..e00f0b2 100644
--- a/libgloss/aarch64/cpu-init/rdimon-aem-el3.S
+++ b/libgloss/aarch64/cpu-init/rdimon-aem-el3.S
@@ -145,6 +145,33 @@ _flat_map:
 	dsb	sy
 	msr	sctlr_el3, x0
 	isb
+
+	/* Determine if SVE is available.  */
+       mrs      x0, id_aa64pfr0_el1
+       tbz      x0, 32, .Lnosve
+
+       /* set up CPTR_EL3.TZ to 1.  */
+       mrs     x0, cptr_el3
+
+       /* TZ is bit 8 of CPTR_EL3.  */
+       orr     x0, x0, #0x100
+       msr     cptr_el3, x0
+       isb
+
+       /* set up vector lenght in ZCR_EL3 (4 LSB).  */
+       mov     x2, #0xF
+
+       /* Try to set the maximum value supported by the architecture (2048).
+	  SVE Arch.
+
+	    "If this field is set to a value that is not supported by the
+	    implementation then reading the register must return the highest
+	    supported vector length that is less than the value written."  */
+       mrs     x1, s3_6_c1_c2_0                /* mrs  x1, zcr_el3.  */
+       bfi     x1, x2, 0, 4
+       msr     s3_6_c1_c2_0, x1                /* msr  zcr_el3, x1.  */
+       isb
+.Lnosve:
 	ret
 
 	.data