This is the mail archive of the newlib-cvs@sourceware.org mailing list for the newlib project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[newlib-cygwin] Load balance sockets with new SO_REUSEPORT_LB option.


https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=b40c48e0572623aac199962d1c78907a9aa82cd6

commit b40c48e0572623aac199962d1c78907a9aa82cd6
Author: sbruno <sbruno@FreeBSD.org>
Date:   Wed Jun 6 15:45:57 2018 +0000

    Load balance sockets with new SO_REUSEPORT_LB option.
    
    This patch adds a new socket option, SO_REUSEPORT_LB, which allow multiple
    programs or threads to bind to the same port and incoming connections will be
    load balanced using a hash function.
    
    Most of the code was copied from a similar patch for DragonflyBSD.
    
    However, in DragonflyBSD, load balancing is a global on/off setting and can not
    be set per socket. This patch allows for simultaneous use of both the current
    SO_REUSEPORT and the new SO_REUSEPORT_LB options on the same system.
    
    Required changes to structures:
    Globally change so_options from 16 to 32 bit value to allow for more options.
    Add hashtable in pcbinfo to hold all SO_REUSEPORT_LB sockets.
    
    Limitations:
    As DragonflyBSD, a load balance group is limited to 256 pcbs (256 programs or
    threads sharing the same socket).
    
    This is a substantially different contribution as compared to its original
    incarnation at svn r332894 and reverted at svn r332967.  Thanks to rwatson@
    for the substantive feedback that is included in this commit.
    
    Submitted by:	Johannes Lundberg <johalun0@gmail.com>
    Obtained from:	DragonflyBSD
    Relnotes:	Yes
    Sponsored by:	Limelight Networks
    Differential Revision:	https://reviews.freebsd.org/D11003

Diff:
---
 newlib/libc/sys/rtems/include/sys/socket.h | 35 +++++++++++++++---------------
 1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/newlib/libc/sys/rtems/include/sys/socket.h b/newlib/libc/sys/rtems/include/sys/socket.h
index 345eaa8..a1ffbbd 100644
--- a/newlib/libc/sys/rtems/include/sys/socket.h
+++ b/newlib/libc/sys/rtems/include/sys/socket.h
@@ -126,26 +126,27 @@ typedef	__uintptr_t	uintptr_t;
 /*
  * Option flags per-socket.
  */
-#define	SO_DEBUG	0x0001		/* turn on debugging info recording */
-#define	SO_ACCEPTCONN	0x0002		/* socket has had listen() */
-#define	SO_REUSEADDR	0x0004		/* allow local address reuse */
-#define	SO_KEEPALIVE	0x0008		/* keep connections alive */
-#define	SO_DONTROUTE	0x0010		/* just use interface addresses */
-#define	SO_BROADCAST	0x0020		/* permit sending of broadcast msgs */
+#define	SO_DEBUG	0x00000001	/* turn on debugging info recording */
+#define	SO_ACCEPTCONN	0x00000002	/* socket has had listen() */
+#define	SO_REUSEADDR	0x00000004	/* allow local address reuse */
+#define	SO_KEEPALIVE	0x00000008	/* keep connections alive */
+#define	SO_DONTROUTE	0x00000010	/* just use interface addresses */
+#define	SO_BROADCAST	0x00000020	/* permit sending of broadcast msgs */
 #if __BSD_VISIBLE
-#define	SO_USELOOPBACK	0x0040		/* bypass hardware when possible */
+#define	SO_USELOOPBACK	0x00000040	/* bypass hardware when possible */
 #endif
-#define	SO_LINGER	0x0080		/* linger on close if data present */
-#define	SO_OOBINLINE	0x0100		/* leave received OOB data in line */
+#define	SO_LINGER	0x00000080	/* linger on close if data present */
+#define	SO_OOBINLINE	0x00000100	/* leave received OOB data in line */
 #if __BSD_VISIBLE
-#define	SO_REUSEPORT	0x0200		/* allow local address & port reuse */
-#define	SO_TIMESTAMP	0x0400		/* timestamp received dgram traffic */
-#define	SO_NOSIGPIPE	0x0800		/* no SIGPIPE from EPIPE */
-#define	SO_ACCEPTFILTER	0x1000		/* there is an accept filter */
-#define	SO_BINTIME	0x2000		/* timestamp received dgram traffic */
-#endif
-#define	SO_NO_OFFLOAD	0x4000		/* socket cannot be offloaded */
-#define	SO_NO_DDP	0x8000		/* disable direct data placement */
+#define	SO_REUSEPORT	0x00000200	/* allow local address & port reuse */
+#define	SO_TIMESTAMP	0x00000400	/* timestamp received dgram traffic */
+#define	SO_NOSIGPIPE	0x00000800	/* no SIGPIPE from EPIPE */
+#define	SO_ACCEPTFILTER	0x00001000	/* there is an accept filter */
+#define	SO_BINTIME	0x00002000	/* timestamp received dgram traffic */
+#endif
+#define	SO_NO_OFFLOAD	0x00004000	/* socket cannot be offloaded */
+#define	SO_NO_DDP	0x00008000	/* disable direct data placement */
+#define	SO_REUSEPORT_LB	0x00010000	/* reuse with load balancing */
 
 /*
  * Additional options, not kept in so_options.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]