This is the mail archive of the
newlib-cvs@sourceware.org
mailing list for the newlib project.
[newlib-cygwin] Regenerate files for newlib 2.3.0.
- From: Jeff Johnston <jjohnstn at sourceware dot org>
- To: newlib-cvs at sourceware dot org
- Date: 22 Dec 2015 02:32:39 -0000
- Subject: [newlib-cygwin] Regenerate files for newlib 2.3.0.
https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;h=ad7b3cde9c157f2c34a6a1296e0bda1ad0975bda
commit ad7b3cde9c157f2c34a6a1296e0bda1ad0975bda
Author: Jeff Johnston <jjohnstn@redhat.com>
Date: Mon Dec 21 21:03:25 2015 -0500
Regenerate files for newlib 2.3.0.
Diff:
---
newlib/NEWS | 14 +
newlib/README | 18 +-
newlib/acinclude.m4 | 2 +-
newlib/configure | 5124 ++++++++++++--------
newlib/doc/configure | 20 +-
newlib/iconvdata/configure | 20 +-
newlib/libc/aclocal.m4 | 943 ----
newlib/libc/configure | 2179 +--------
newlib/libc/machine/a29k/configure | 20 +-
newlib/libc/machine/aarch64/configure | 20 +-
newlib/libc/machine/arc/Makefile.in | 45 +-
newlib/libc/machine/arc/aclocal.m4 | 78 +-
newlib/libc/machine/arc/configure | 448 +-
newlib/libc/machine/arm/configure | 20 +-
newlib/libc/machine/bfin/configure | 20 +-
newlib/libc/machine/configure | 24 +-
newlib/libc/machine/cr16/configure | 20 +-
newlib/libc/machine/cris/configure | 20 +-
newlib/libc/machine/crx/configure | 20 +-
newlib/libc/machine/d10v/configure | 20 +-
newlib/libc/machine/d30v/configure | 20 +-
newlib/libc/machine/epiphany/configure | 20 +-
newlib/libc/machine/fr30/configure | 20 +-
newlib/libc/machine/frv/configure | 20 +-
newlib/libc/machine/ft32/configure | 20 +-
newlib/libc/machine/h8300/configure | 20 +-
newlib/libc/machine/h8500/configure | 20 +-
newlib/libc/machine/hppa/configure | 20 +-
newlib/libc/machine/i386/configure | 20 +-
newlib/libc/machine/i960/configure | 20 +-
newlib/libc/machine/iq2000/configure | 20 +-
newlib/libc/machine/lm32/configure | 20 +-
newlib/libc/machine/m32c/configure | 20 +-
newlib/libc/machine/m32r/configure | 20 +-
newlib/libc/machine/m68hc11/configure | 20 +-
newlib/libc/machine/m68k/configure | 20 +-
newlib/libc/machine/m88k/configure | 20 +-
newlib/libc/machine/mep/configure | 20 +-
newlib/libc/machine/microblaze/configure | 20 +-
newlib/libc/machine/mips/configure | 20 +-
newlib/libc/machine/mn10200/configure | 20 +-
newlib/libc/machine/mn10300/configure | 20 +-
newlib/libc/machine/moxie/configure | 20 +-
newlib/libc/machine/msp430/configure | 20 +-
newlib/libc/machine/mt/configure | 20 +-
newlib/libc/machine/nds32/configure | 20 +-
newlib/libc/machine/necv70/configure | 20 +-
newlib/libc/machine/nios2/configure | 20 +-
newlib/libc/machine/or1k/configure | 20 +-
newlib/libc/machine/powerpc/configure | 20 +-
newlib/libc/machine/rl78/configure | 20 +-
newlib/libc/machine/rx/configure | 20 +-
newlib/libc/machine/sh/configure | 20 +-
newlib/libc/machine/sparc/configure | 20 +-
newlib/libc/machine/spu/configure | 20 +-
newlib/libc/machine/tic4x/configure | 20 +-
newlib/libc/machine/tic6x/configure | 20 +-
newlib/libc/machine/tic80/configure | 20 +-
newlib/libc/machine/v850/configure | 20 +-
newlib/libc/machine/visium/configure | 20 +-
newlib/libc/machine/w65/configure | 20 +-
newlib/libc/machine/x86_64/configure | 20 +-
newlib/libc/machine/xc16x/configure | 20 +-
newlib/libc/machine/xscale/configure | 20 +-
newlib/libc/machine/xstormy16/configure | 20 +-
newlib/libc/machine/z8k/configure | 20 +-
newlib/libc/sys/a29khif/configure | 20 +-
newlib/libc/sys/arm/configure | 20 +-
newlib/libc/sys/configure | 20 +-
newlib/libc/sys/d10v/configure | 20 +-
newlib/libc/sys/decstation/configure | 20 +-
newlib/libc/sys/epiphany/configure | 20 +-
newlib/libc/sys/h8300hms/configure | 20 +-
newlib/libc/sys/h8500hms/configure | 20 +-
newlib/libc/sys/linux/configure | 20 +-
newlib/libc/sys/linux/linuxthreads/configure | 20 +-
.../libc/sys/linux/linuxthreads/machine/configure | 20 +-
.../sys/linux/linuxthreads/machine/i386/configure | 20 +-
newlib/libc/sys/linux/machine/configure | 20 +-
newlib/libc/sys/linux/machine/i386/configure | 20 +-
newlib/libc/sys/m88kbug/configure | 20 +-
newlib/libc/sys/mmixware/configure | 20 +-
newlib/libc/sys/netware/configure | 20 +-
newlib/libc/sys/or1k/configure | 20 +-
newlib/libc/sys/rdos/configure | 20 +-
newlib/libc/sys/rtems/configure | 20 +-
newlib/libc/sys/sh/configure | 20 +-
newlib/libc/sys/sparc64/configure | 20 +-
newlib/libc/sys/sun4/configure | 20 +-
newlib/libc/sys/sysmec/configure | 20 +-
newlib/libc/sys/sysnec810/configure | 20 +-
newlib/libc/sys/sysnecv850/configure | 20 +-
newlib/libc/sys/sysvi386/configure | 20 +-
newlib/libc/sys/sysvnecv70/configure | 20 +-
newlib/libc/sys/tic80/configure | 20 +-
newlib/libc/sys/tirtos/configure | 20 +-
newlib/libc/sys/w65/configure | 20 +-
newlib/libc/sys/z8ksim/configure | 20 +-
newlib/libm/complex/Makefile.in | 91 +-
newlib/libm/configure | 20 +-
newlib/libm/machine/arm/configure | 20 +-
newlib/libm/machine/configure | 20 +-
newlib/libm/machine/i386/configure | 20 +-
newlib/libm/machine/nds32/configure | 20 +-
newlib/libm/machine/spu/configure | 20 +-
105 files changed, 4639 insertions(+), 6207 deletions(-)
diff --git a/newlib/NEWS b/newlib/NEWS
index 040950b..b4e7e3c 100644
--- a/newlib/NEWS
+++ b/newlib/NEWS
@@ -1,3 +1,17 @@
+*** Major changes in newlib version 2.3.0:
+
+- dynamic atexit logic fixed
+- various arm performance enhancements
+- new version of strtold
+- doc improvements
+- arc platform support redone
+- strftime improvements/enhancements
+- imported logic from FreeBSD
+- locking fixes
+- complex math enhancements
+- visium platform support added
+- or1k platform support added
+
*** Major changes in newlib version 2.2.0:
- multiple functional/performance enhancements for arm/aarch64
diff --git a/newlib/README b/newlib/README
index 6d860d7..bcabfba 100644
--- a/newlib/README
+++ b/newlib/README
@@ -1,4 +1,4 @@
- README for newlib-2.2.0 release
+ README for newlib-2.3.0 release
(mostly cribbed from the README in the gdb-4.13 release)
This is `newlib', a simple ANSI C library, math library, and collection
@@ -17,8 +17,8 @@ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Unpacking and Installation -- quick overview
==========================
-When you unpack the newlib-2.2.0.tar.gz file, you'll find a directory
-called `newlib-2.2.0', which contains:
+When you unpack the newlib-2.3.0.tar.gz file, you'll find a directory
+called `newlib-2.3.0', which contains:
COPYING config/ install-sh* mpw-configure
COPYING.LIB config-ml.in libgloss/ mpw-install
@@ -94,13 +94,13 @@ directory. If the path to `configure' would be the same as the
argument to `--srcdir', you can leave out the `--srcdir' option; it
will be assumed.)
- For example, with version 2.2.0, you can build NEWLIB in a separate
+ For example, with version 2.3.0, you can build NEWLIB in a separate
directory for a Sun 4 cross m68k-aout environment like this:
- cd newlib-2.2.0
+ cd newlib-2.3.0
mkdir ../newlib-m68k-aout
cd ../newlib-m68k-aout
- ../newlib-2.2.0/configure --host=sun4 --target=m68k-aout
+ ../newlib-2.3.0/configure --host=sun4 --target=m68k-aout
make
When `configure' builds a configuration using a remote source
@@ -116,8 +116,8 @@ called `configure' (or one of its subdirectories).
The `Makefile' that `configure' generates in each source directory
also runs recursively. If you type `make' in a source directory such
-as `newlib-2.2.0' (or in a separate configured directory configured with
-`--srcdir=PATH/newlib-2.2.0'), you will build all the required libraries.
+as `newlib-2.3.0' (or in a separate configured directory configured with
+`--srcdir=PATH/newlib-2.3.0'), you will build all the required libraries.
When you have multiple hosts or targets configured in separate
directories, you can run `make' on them in parallel (for example, if
@@ -586,7 +586,7 @@ Reporting Bugs
The correct address for reporting bugs found in NEWLIB is
"newlib@sourceware.org". Please email all bug reports to that
-address. Please include the NEWLIB version number (e.g., newlib-2.2.0),
+address. Please include the NEWLIB version number (e.g., newlib-2.3.0),
and how you configured it (e.g., "sun4 host and m68k-aout target").
Since NEWLIB supports many different configurations, it is important
that you be precise about this.
diff --git a/newlib/acinclude.m4 b/newlib/acinclude.m4
index c46f7fb..9fefa32 100644
--- a/newlib/acinclude.m4
+++ b/newlib/acinclude.m4
@@ -2,7 +2,7 @@ dnl This provides configure definitions used by all the newlib
dnl configure.in files.
AC_DEFUN([DEF_NEWLIB_VERSION],
-m4_define([NEWLIB_VERSION],[2.2.0]))
+m4_define([NEWLIB_VERSION],[2.3.0]))
dnl Basic newlib configury. This calls basic introductory stuff,
dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs
diff --git a/newlib/configure b/newlib/configure
index 19cf1d9..99f9200 100755
--- a/newlib/configure
+++ b/newlib/configure
@@ -1,22 +1,18 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for newlib 2.2.0.
-#
+# Generated by GNU Autoconf 2.63 for newlib 2.3.0.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
-#
-#
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -24,15 +20,23 @@ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
esac
+
fi
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
as_nl='
'
export as_nl
@@ -40,13 +44,7 @@ export as_nl
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
as_echo='printf %s\n'
as_echo_n='printf %s'
else
@@ -57,7 +55,7 @@ else
as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
as_echo_n_body='eval
arg=$1;
- case $arg in #(
+ case $arg in
*"$as_nl"*)
expr "X$arg" : "X\\(.*\\)$as_nl";
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,6 +78,13 @@ if test "${PATH_SEPARATOR+set}" != set; then
}
fi
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
@@ -89,16 +94,15 @@ fi
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
+case $0 in
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
IFS=$as_save_IFS
;;
@@ -110,16 +114,12 @@ if test "x$as_myself" = x; then
fi
if test ! -f "$as_myself"; then
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
+ { (exit 1); exit 1; }
fi
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
@@ -131,314 +131,348 @@ export LC_ALL
LANGUAGE=C
export LANGUAGE
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+$as_unset CDPATH
+
if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
+ as_have_required=no
fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
else
- exitcode=1; echo positional parameters were not saved.
+ exitcode=1
+ echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+
+(
test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
PATH=/empty FPATH=/empty; export PATH FPATH
test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
- || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" )) || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
+ as_candidate_shells=
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
+ case $as_dir in
/*)
for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
done;;
esac
- as_found=false
done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
IFS=$as_save_IFS
- if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
-fi
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
}
-as_unset=as_fn_unset
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
+if as_func_ret_success; then
+ :
else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+test $exitcode = 0) || { (exit 1); exit 1; }
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
+(
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
+(
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )) || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
else
- as_expr=false
+ exitcode=1
+ echo as_func_success failed.
fi
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
else
- as_basename=false
+ exitcode=1
+ echo as_func_ret_success failed.
fi
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
else
- as_dirname=false
+ exitcode=1
+ echo positional parameters were not saved.
fi
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell bug-autoconf@gnu.org about your system,
+ echo including any error possibly output before this message.
+ echo This can help us improve future autoconf versions.
+ echo Configuration will now proceed without shell functions.
+}
+
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
@@ -455,7 +489,8 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
@@ -465,18 +500,29 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
exit
}
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
+case `echo -n x` in
-n*)
- case `echo 'xy\c'` in
+ case `echo 'x\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
+ *) ECHO_C='\c';;
esac;;
*)
ECHO_N='-n';;
esac
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
@@ -506,7 +552,7 @@ rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
+ as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
@@ -525,10 +571,10 @@ else
if test -d "$1"; then
test -d "$1/.";
else
- case $1 in #(
+ case $1 in
-*)set "./$1";;
esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
@@ -541,14 +587,14 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
SHELL=${CONFIG_SHELL-/bin/sh}
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
+exec 7<&0 </dev/null 6>&1
# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
@@ -563,14 +609,14 @@ cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME='newlib'
PACKAGE_TARNAME='newlib'
-PACKAGE_VERSION='2.2.0'
-PACKAGE_STRING='newlib 2.2.0'
+PACKAGE_VERSION='2.3.0'
+PACKAGE_STRING='newlib 2.3.0'
PACKAGE_BUGREPORT=''
-PACKAGE_URL=''
ac_unique_file="libc"
# Factoring default headers for most tests.
@@ -767,7 +813,6 @@ bindir
program_transform_name
prefix
exec_prefix
-PACKAGE_URL
PACKAGE_BUGREPORT
PACKAGE_STRING
PACKAGE_VERSION
@@ -891,9 +936,8 @@ do
fi
case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
@@ -938,7 +982,8 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -964,7 +1009,8 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
+ { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1168,7 +1214,8 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1184,7 +1231,8 @@ do
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
+ { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
+ { (exit 1); exit 1; }; }
ac_useropt_orig=$ac_useropt
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
case $ac_user_opts in
@@ -1214,17 +1262,17 @@ do
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
+ -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
@@ -1233,7 +1281,7 @@ Try \`$0 --help' for more information"
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
@@ -1241,13 +1289,15 @@ done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
+ { $as_echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
fi
if test -n "$ac_unrecognized_opts"; then
case $enable_option_checking in
no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
+ { (exit 1); exit 1; }; } ;;
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
esac
fi
@@ -1270,7 +1320,8 @@ do
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+ { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
@@ -1284,8 +1335,8 @@ target=$target_alias
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
@@ -1300,9 +1351,11 @@ test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
+ { $as_echo "$as_me: error: working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
+ { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
# Find the source files, if location was not specified.
@@ -1341,11 +1394,13 @@ else
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+ { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1371,7 +1426,7 @@ if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures newlib 2.2.0 to adapt to many kinds of systems.
+\`configure' configures newlib 2.3.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1385,7 +1440,7 @@ Configuration:
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
+ -q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
@@ -1441,7 +1496,7 @@ fi
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of newlib 2.2.0:";;
+ short | recursive ) echo "Configuration of newlib 2.3.0:";;
esac
cat <<\_ACEOF
@@ -1502,14 +1557,13 @@ Some influential environment variables:
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
-Report bugs to the package provider.
_ACEOF
ac_status=$?
fi
@@ -1572,286 +1626,22 @@ fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-newlib configure 2.2.0
-generated by GNU Autoconf 2.68
+newlib configure 2.3.0
+generated by GNU Autoconf 2.63
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by newlib $as_me 2.2.0, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+It was created by newlib $as_me 2.3.0, which was
+generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -1887,8 +1677,8 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
+ $as_echo "PATH: $as_dir"
+done
IFS=$as_save_IFS
} >&5
@@ -1925,9 +1715,9 @@ do
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
@@ -1943,13 +1733,13 @@ do
-* ) ac_must_keep_next=true ;;
esac
fi
- as_fn_append ac_configure_args " '$ac_arg'"
+ ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
@@ -1961,9 +1751,11 @@ trap 'exit_status=$?
{
echo
- $as_echo "## ---------------- ##
+ cat <<\_ASBOX
+## ---------------- ##
## Cache variables. ##
-## ---------------- ##"
+## ---------------- ##
+_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
(
@@ -1972,13 +1764,13 @@ trap 'exit_status=$?
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+ *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
+ *) $as_unset $ac_var ;;
esac ;;
esac
done
@@ -1997,9 +1789,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
)
echo
- $as_echo "## ----------------- ##
+ cat <<\_ASBOX
+## ----------------- ##
## Output variables. ##
-## ----------------- ##"
+## ----------------- ##
+_ASBOX
echo
for ac_var in $ac_subst_vars
do
@@ -2012,9 +1806,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
echo
if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
+ cat <<\_ASBOX
+## ------------------- ##
## File substitutions. ##
-## ------------------- ##"
+## ------------------- ##
+_ASBOX
echo
for ac_var in $ac_subst_files
do
@@ -2028,9 +1824,11 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
fi
if test -s confdefs.h; then
- $as_echo "## ----------- ##
+ cat <<\_ASBOX
+## ----------- ##
## confdefs.h. ##
-## ----------- ##"
+## ----------- ##
+_ASBOX
echo
cat confdefs.h
echo
@@ -2044,39 +1842,37 @@ $as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
-$as_echo "/* confdefs.h */" > confdefs.h
-
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
+
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
@@ -2085,12 +1881,7 @@ _ACEOF
ac_site_file1=NONE
ac_site_file2=NONE
if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
+ ac_site_file1=$CONFIG_SITE
elif test "x$prefix" != xNONE; then
ac_site_file1=$prefix/share/config.site
ac_site_file2=$prefix/etc/config.site
@@ -2101,23 +1892,19 @@ fi
for ac_site_file in "$ac_site_file1" "$ac_site_file2"
do
test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+ if test -r "$ac_site_file"; then
+ { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
$as_echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
+ . "$ac_site_file"
fi
done
if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
$as_echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
@@ -2125,7 +1912,7 @@ $as_echo "$as_me: loading cache $cache_file" >&6;}
esac
fi
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+ { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
$as_echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
@@ -2140,11 +1927,11 @@ for ac_var in $ac_precious_vars; do
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
@@ -2154,17 +1941,17 @@ $as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_old_val_w=`echo x $ac_old_val`
ac_new_val_w=`echo x $ac_new_val`
if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+ { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
ac_cache_corrupted=:
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+ { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
eval $ac_var=\$ac_old_val
fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+ { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+ { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
fi;;
esac
@@ -2176,20 +1963,43 @@ $as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+ { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -2219,7 +2029,9 @@ for ac_dir in .. "$srcdir"/..; do
fi
done
if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&5
+$as_echo "$as_me: error: cannot find install-sh or install.sh in .. \"$srcdir\"/.." >&2;}
+ { (exit 1); exit 1; }; }
fi
# These three variables are undocumented and unsupported,
@@ -2233,75 +2045,89 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
# Check whether --enable-newlib-io-pos-args was given.
-if test "${enable_newlib_io_pos_args+set}" = set; then :
+if test "${enable_newlib_io_pos_args+set}" = set; then
enableval=$enable_newlib_io_pos_args; case "${enableval}" in
yes) newlib_io_pos_args=yes ;;
no) newlib_io_pos_args=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-pos-args option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-pos-args option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-io-pos-args option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_io_pos_args=
fi
# Check whether --enable-newlib-io-c99-formats was given.
-if test "${enable_newlib_io_c99_formats+set}" = set; then :
+if test "${enable_newlib_io_c99_formats+set}" = set; then
enableval=$enable_newlib_io_c99_formats; case "${enableval}" in
yes) newlib_io_c99_formats=yes;;
no) newlib_io_c99_formats=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-c99-formats option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-c99-formats option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-io-c99-formats option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_io_c99_formats=
fi
# Check whether --enable-newlib-register-fini was given.
-if test "${enable_newlib_register_fini+set}" = set; then :
+if test "${enable_newlib_register_fini+set}" = set; then
enableval=$enable_newlib_register_fini; case "${enableval}" in
yes) newlib_register_fini=yes;;
no) newlib_register_fini=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-register-fini option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-register-fini option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-register-fini option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_register_fini=
fi
# Check whether --enable-newlib-io-long-long was given.
-if test "${enable_newlib_io_long_long+set}" = set; then :
+if test "${enable_newlib_io_long_long+set}" = set; then
enableval=$enable_newlib_io_long_long; case "${enableval}" in
yes) newlib_io_long_long=yes;;
no) newlib_io_long_long=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-long-long option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-long-long option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-io-long-long option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_io_long_long=
fi
# Check whether --enable-newlib-io-long-double was given.
-if test "${enable_newlib_io_long_double+set}" = set; then :
+if test "${enable_newlib_io_long_double+set}" = set; then
enableval=$enable_newlib_io_long_double; case "${enableval}" in
yes) newlib_io_long_double=yes;;
no) newlib_io_long_double=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-long-double option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-long-double option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-io-long-double option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_io_long_double=
fi
# Check whether --enable-newlib-mb was given.
-if test "${enable_newlib_mb+set}" = set; then :
+if test "${enable_newlib_mb+set}" = set; then
enableval=$enable_newlib_mb; case "${enableval}" in
yes) newlib_mb=yes;;
no) newlib_mb=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-mb option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-mb option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-mb option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_mb=
fi
# Check whether --enable-newlib-iconv-encodings was given.
-if test "${enable_newlib_iconv_encodings+set}" = set; then :
+if test "${enable_newlib_iconv_encodings+set}" = set; then
enableval=$enable_newlib_iconv_encodings; if test x${enableval} = x; then
- as_fn_error $? "bad value ${enableval} for newlib-iconv-encodings option - use comma-separated encodings list" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv-encodings option - use comma-separated encodings list" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv-encodings option - use comma-separated encodings list" >&2;}
+ { (exit 1); exit 1; }; }
fi
iconv_encodings=${enableval}
@@ -2310,9 +2136,11 @@ else
fi
# Check whether --enable-newlib-iconv-from-encodings was given.
-if test "${enable_newlib_iconv_from_encodings+set}" = set; then :
+if test "${enable_newlib_iconv_from_encodings+set}" = set; then
enableval=$enable_newlib_iconv_from_encodings; if test x${enableval} = x; then
- as_fn_error $? "bad value ${enableval} for newlib-iconv-from-encodings option - use comma-separated encodings list" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv-from-encodings option - use comma-separated encodings list" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv-from-encodings option - use comma-separated encodings list" >&2;}
+ { (exit 1); exit 1; }; }
fi
iconv_from_encodings=${enableval}
@@ -2321,9 +2149,11 @@ else
fi
# Check whether --enable-newlib-iconv-to-encodings was given.
-if test "${enable_newlib_iconv_to_encodings+set}" = set; then :
+if test "${enable_newlib_iconv_to_encodings+set}" = set; then
enableval=$enable_newlib_iconv_to_encodings; if test x${enableval} = x; then
- as_fn_error $? "bad value ${enableval} for newlib-iconv-to-encodings option - use comma-separated encodings list" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv-to-encodings option - use comma-separated encodings list" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv-to-encodings option - use comma-separated encodings list" >&2;}
+ { (exit 1); exit 1; }; }
fi
iconv_to_encodings=${enableval}
@@ -2332,12 +2162,14 @@ else
fi
# Check whether --enable-newlib-iconv-external-ccs was given.
-if test "${enable_newlib_iconv_external_ccs+set}" = set; then :
+if test "${enable_newlib_iconv_external_ccs+set}" = set; then
enableval=$enable_newlib_iconv_external_ccs; if test "${newlib_iconv_external_ccs+set}" != set; then
case "${enableval}" in
yes) newlib_iconv_external_ccs=yes ;;
no) newlib_iconv_external_ccs=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-iconv-external-ccs option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv-external-ccs option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv-external-ccs option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2345,12 +2177,14 @@ else
fi
# Check whether --enable-newlib-atexit-dynamic-alloc was given.
-if test "${enable_newlib_atexit_dynamic_alloc+set}" = set; then :
+if test "${enable_newlib_atexit_dynamic_alloc+set}" = set; then
enableval=$enable_newlib_atexit_dynamic_alloc; if test "${newlib_atexit_dynamic_alloc+set}" != set; then
case "${enableval}" in
yes) newlib_atexit_dynamic_alloc=yes ;;
no) newlib_atexit_dynamic_alloc=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-atexit-dynamic-alloc option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-atexit-dynamic-alloc option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-atexit-dynamic-alloc option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2358,12 +2192,14 @@ else
fi
# Check whether --enable-newlib-global-atexit was given.
-if test "${enable_newlib_global_atexit+set}" = set; then :
+if test "${enable_newlib_global_atexit+set}" = set; then
enableval=$enable_newlib_global_atexit; if test "${newlib_global_atexit+set}" != set; then
case "${enableval}" in
yes) newlib_global_atexit=yes ;;
no) newlib_global_atexit=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-global-atexit option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-global-atexit option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-global-atexit option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2371,23 +2207,27 @@ else
fi
# Check whether --enable-newlib-reent-small was given.
-if test "${enable_newlib_reent_small+set}" = set; then :
+if test "${enable_newlib_reent_small+set}" = set; then
enableval=$enable_newlib_reent_small; case "${enableval}" in
yes) newlib_reent_small=yes;;
no) newlib_reent_small=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-reent-small option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-reent-small option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-reent-small option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_reent_small=
fi
# Check whether --enable-newlib-fvwrite-in-streamio was given.
-if test "${enable_newlib_fvwrite_in_streamio+set}" = set; then :
+if test "${enable_newlib_fvwrite_in_streamio+set}" = set; then
enableval=$enable_newlib_fvwrite_in_streamio; if test "${newlib_fvwrite_in_streamio+set}" != set; then
case "${enableval}" in
yes) newlib_fvwrite_in_streamio=yes ;;
no) newlib_fvwrite_in_streamio=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-fvwrite-in-streamio option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-fvwrite-in-streamio option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-fvwrite-in-streamio option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2395,12 +2235,14 @@ else
fi
# Check whether --enable-newlib-fseek-optimization was given.
-if test "${enable_newlib_fseek_optimization+set}" = set; then :
+if test "${enable_newlib_fseek_optimization+set}" = set; then
enableval=$enable_newlib_fseek_optimization; if test "${newlib_fseek_optimization+set}" != set; then
case "${enableval}" in
yes) newlib_fseek_optimization=yes ;;
no) newlib_fseek_optimization=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-fseek-optimization option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-fseek-optimization option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-fseek-optimization option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2408,11 +2250,13 @@ else
fi
# Check whether --enable-newlib_wide_orient was given.
-if test "${enable_newlib_wide_orient+set}" = set; then :
+if test "${enable_newlib_wide_orient+set}" = set; then
enableval=$enable_newlib_wide_orient; case "${enableval}" in
yes) newlib_wide_orient=yes ;;
no) newlib_wide_orient=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-wide-orient" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-wide-orient" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-wide-orient" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_wide_orient=yes
@@ -2420,12 +2264,14 @@ fi
# Check whether --enable-newlib-nano-malloc was given.
-if test "${enable_newlib_nano_malloc+set}" = set; then :
+if test "${enable_newlib_nano_malloc+set}" = set; then
enableval=$enable_newlib_nano_malloc; if test "${newlib_nano_malloc+set}" != set; then
case "${enableval}" in
yes) newlib_nano_malloc=yes ;;
no) newlib_nano_malloc=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-nano-malloc option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-nano-malloc option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-nano-malloc option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2433,12 +2279,14 @@ else
fi
# Check whether --enable-newlib-unbuf-stream-opt was given.
-if test "${enable_newlib_unbuf_stream_opt+set}" = set; then :
+if test "${enable_newlib_unbuf_stream_opt+set}" = set; then
enableval=$enable_newlib_unbuf_stream_opt; if test "${newlib_unbuf_stream_opt+set}" != set; then
case "${enableval}" in
yes) newlib_unbuf_stream_opt=yes ;;
no) newlib_unbuf_stream_opt=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-unbuf-stream-opt option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-unbuf-stream-opt option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-unbuf-stream-opt option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2446,12 +2294,14 @@ else
fi
# Check whether --enable-lite-exit was given.
-if test "${enable_lite_exit+set}" = set; then :
+if test "${enable_lite_exit+set}" = set; then
enableval=$enable_lite_exit; if test "${lite_exit+set}" != set; then
case "${enableval}" in
yes) lite_exit=yes ;;
no) lite_exit=no ;;
- *) as_fn_error $? "bad value ${enableval} for lite-exit option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for lite-exit option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for lite-exit option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -2459,11 +2309,13 @@ else
fi
# Check whether --enable-newlib_nano_formatted_io was given.
-if test "${enable_newlib_nano_formatted_io+set}" = set; then :
+if test "${enable_newlib_nano_formatted_io+set}" = set; then
enableval=$enable_newlib_nano_formatted_io; case "${enableval}" in
yes) newlib_nano_formatted_io=yes ;;
no) newlib_nano_formatted_io=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-nano-formatted-io" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-nano-formatted-io" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-nano-formatted-io" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_nano_formatted_io=no
@@ -2473,27 +2325,35 @@ fi
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
+ { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+{ $as_echo "$as_me:$LINENO: checking build system type" >&5
$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
+if test "${ac_cv_build+set}" = set; then
$as_echo_n "(cached) " >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
$as_echo "$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+$as_echo "$as_me: error: invalid value of canonical build" >&2;}
+ { (exit 1); exit 1; }; };;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
@@ -2509,39 +2369,6 @@ IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
am__api_version='1.11'
# Find a good install program. We prefer a C program (faster),
@@ -2558,10 +2385,10 @@ am__api_version='1.11'
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
$as_echo_n "checking for a BSD-compatible install... " >&6; }
if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
+if test "${ac_cv_path_install+set}" = set; then
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2569,11 +2396,11 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
@@ -2610,7 +2437,7 @@ case $as_dir/ in #((
;;
esac
- done
+done
IFS=$as_save_IFS
rm -rf conftest.one conftest.two conftest.dir
@@ -2626,7 +2453,7 @@ fi
INSTALL=$ac_install_sh
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
$as_echo "$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -2637,7 +2464,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
# Just in case
sleep 1
@@ -2648,11 +2475,15 @@ am_lf='
'
case `pwd` in
*[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+ { { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5
+$as_echo "$as_me: error: unsafe absolute working directory name" >&2;}
+ { (exit 1); exit 1; }; };;
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ { { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5
+$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;}
+ { (exit 1); exit 1; }; };;
esac
# Do `set' in a subshell so we don't clobber the current shell's
@@ -2674,8 +2505,11 @@ if (
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
fi
test "$2" = conftest.file
@@ -2684,10 +2518,13 @@ then
# Ok.
:
else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+$as_echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+{ $as_echo "$as_me:$LINENO: result: yes" >&5
$as_echo "yes" >&6; }
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2715,7 +2552,7 @@ if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+ { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
@@ -2736,9 +2573,9 @@ if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
+if test "${ac_cv_prog_STRIP+set}" = set; then
$as_echo_n "(cached) " >&6
else
if test -n "$STRIP"; then
@@ -2749,24 +2586,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
- done
+done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+ { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
$as_echo "$STRIP" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:$LINENO: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2776,9 +2613,9 @@ if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
$as_echo_n "(cached) " >&6
else
if test -n "$ac_ct_STRIP"; then
@@ -2789,24 +2626,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
- done
+done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+ { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
$as_echo "$ac_ct_STRIP" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:$LINENO: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2815,7 +2652,7 @@ fi
else
case $cross_compiling:$ac_tool_warned in
yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
ac_tool_warned=yes ;;
esac
@@ -2828,10 +2665,10 @@ fi
fi
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
+ if test "${ac_cv_path_mkdir+set}" = set; then
$as_echo_n "(cached) " >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2839,7 +2676,7 @@ for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
+ for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
{ test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2851,12 +2688,11 @@ do
esac
done
done
- done
+done
IFS=$as_save_IFS
fi
- test -d ./--version && rmdir ./--version
if test "${ac_cv_path_mkdir+set}" = set; then
MKDIR_P="$ac_cv_path_mkdir -p"
else
@@ -2864,10 +2700,11 @@ fi
# value for MKDIR_P within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
MKDIR_P="$ac_install_sh -d"
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
mkdir_p="$MKDIR_P"
@@ -2880,9 +2717,9 @@ for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
+if test "${ac_cv_prog_AWK+set}" = set; then
$as_echo_n "(cached) " >&6
else
if test -n "$AWK"; then
@@ -2893,24 +2730,24 @@ for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
- done
+done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+ { $as_echo "$as_me:$LINENO: result: $AWK" >&5
$as_echo "$AWK" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:$LINENO: result: no" >&5
$as_echo "no" >&6; }
fi
@@ -2918,11 +2755,11 @@ fi
test -n "$AWK" && break
done
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
set x ${MAKE-make}
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
$as_echo_n "(cached) " >&6
else
cat >conftest.make <<\_ACEOF
@@ -2930,7 +2767,7 @@ SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
@@ -2940,11 +2777,11 @@ esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ { $as_echo "$as_me:$LINENO: result: yes" >&5
$as_echo "yes" >&6; }
SET_MAKE=
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:$LINENO: result: no" >&5
$as_echo "no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
@@ -2970,7 +2807,7 @@ am__doit:
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
@@ -2998,12 +2835,12 @@ if test "$am__include" = "#"; then
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
$as_echo "$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
+if test "${enable_dependency_tracking+set}" = set; then
enableval=$enable_dependency_tracking;
fi
@@ -3023,56 +2860,66 @@ fi
# Check whether --enable-multilib was given.
-if test "${enable_multilib+set}" = set; then :
+if test "${enable_multilib+set}" = set; then
enableval=$enable_multilib; case "${enableval}" in
yes) multilib=yes ;;
no) multilib=no ;;
- *) as_fn_error $? "bad value ${enableval} for multilib option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for multilib option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
multilib=yes
fi
# Check whether --enable-target-optspace was given.
-if test "${enable_target_optspace+set}" = set; then :
+if test "${enable_target_optspace+set}" = set; then
enableval=$enable_target_optspace; case "${enableval}" in
yes) target_optspace=yes ;;
no) target_optspace=no ;;
- *) as_fn_error $? "bad value ${enableval} for target-optspace option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
target_optspace=
fi
# Check whether --enable-malloc-debugging was given.
-if test "${enable_malloc_debugging+set}" = set; then :
+if test "${enable_malloc_debugging+set}" = set; then
enableval=$enable_malloc_debugging; case "${enableval}" in
yes) malloc_debugging=yes ;;
no) malloc_debugging=no ;;
- *) as_fn_error $? "bad value ${enableval} for malloc-debugging option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
malloc_debugging=
fi
# Check whether --enable-newlib-multithread was given.
-if test "${enable_newlib_multithread+set}" = set; then :
+if test "${enable_newlib_multithread+set}" = set; then
enableval=$enable_newlib_multithread; case "${enableval}" in
yes) newlib_multithread=yes ;;
no) newlib_multithread=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-multithread option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_multithread=yes
fi
# Check whether --enable-newlib-iconv was given.
-if test "${enable_newlib_iconv+set}" = set; then :
+if test "${enable_newlib_iconv+set}" = set; then
enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then
case "${enableval}" in
yes) newlib_iconv=yes ;;
no) newlib_iconv=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-iconv option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
fi
else
@@ -3080,36 +2927,42 @@ else
fi
# Check whether --enable-newlib-elix-level was given.
-if test "${enable_newlib_elix_level+set}" = set; then :
+if test "${enable_newlib_elix_level+set}" = set; then
enableval=$enable_newlib_elix_level; case "${enableval}" in
0) newlib_elix_level=0 ;;
1) newlib_elix_level=1 ;;
2) newlib_elix_level=2 ;;
3) newlib_elix_level=3 ;;
4) newlib_elix_level=4 ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-elix-level option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_elix_level=0
fi
# Check whether --enable-newlib-io-float was given.
-if test "${enable_newlib_io_float+set}" = set; then :
+if test "${enable_newlib_io_float+set}" = set; then
enableval=$enable_newlib_io_float; case "${enableval}" in
yes) newlib_io_float=yes ;;
no) newlib_io_float=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-io-float option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_io_float=yes
fi
# Check whether --enable-newlib-supplied-syscalls was given.
-if test "${enable_newlib_supplied_syscalls+set}" = set; then :
+if test "${enable_newlib_supplied_syscalls+set}" = set; then
enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in
yes) newlib_may_supply_syscalls=yes ;;
no) newlib_may_supply_syscalls=no ;;
- *) as_fn_error $? "bad value ${enableval} for newlib-supplied-syscalls option" "$LINENO" 5 ;;
+ *) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5
+$as_echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;}
+ { (exit 1); exit 1; }; } ;;
esac
else
newlib_may_supply_syscalls=yes
@@ -3138,6 +2991,42 @@ else
fi
+{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+fi
+{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+$as_echo "$as_me: error: invalid value of canonical host" >&2;}
+ { (exit 1); exit 1; }; };;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
@@ -3146,7 +3035,9 @@ if test "`cd $srcdir && pwd`" != "`pwd`"; then
am__isrc=' -I$(srcdir)'
# test to see if srcdir already configured
if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+$as_echo "$as_me: error: source directory alre[...]
[diff truncated at 100000 bytes]