[PATCH v3] Ensure mktime sets errno on error (bug 23789)

["Albert ARIBAUD (3ADEV)" <albert dot aribaud at 3adev dot fr>]

Posix mandates that mktime set errno to EOVERFLOW
on error, but the glibc mktime wasn't doing it so
far.

Fix this and add a test to prevent regressions.
The fix also fixes the same issue in timegm.

The test was run through 'make check' on i686-linux-gnu,
then the fix was added and 'make check' run again.

        * time/Makefile: Add bug-mktime4.
	* time/bug-mktime4.c: New file.
	* time/mktime.c
	(__mktime_internal): Set errno to EOVERFLOW on error.
	(mktime): Move call to __tzset inside conditional.
---
History:
- v3:
  - time/tst-mktime4.c: switch to support/test-driver.
  - time/mktime: remove useless errno handling and move call to __tzset
    insde conditional.
- v2:
  - __mktime_internal: set errno to EOVERFLOW upon failure.
  - mktime: detect failure from __tzset and __mktime_internal by clearing
    errno before call and checking it after. Final errno is as follows:
    - errno set by __mktime_internal if there was one;
    - otherwise, 0 if __mktime_internal returned a non-failure -1;
    - otherwise, errno set by __tzset if there was one;
    - otherwise, value of errno on entry in mktime.
- v1:
  - mktime: set errno to EOVERFLOW if __mktime_internal returns -1

Notes:
- v1 erroneously took any return value of -1 as a sign of error, regardless
  to whether errno was 0 or not; v2 handles the case where __mktime_internal
  return -1 as a correct value.
- an alternative design was considered where every function called,
  directly or indirectly, from mktime would have been made to return a
  failure status but not change errno (and wrappers created to provide
  these function's original behavior). The change was too extensive, and
  had a high risk of breaking some behavior.
- timegm() automatically benefits from this change too, i.e., it now
  reports failures properly with errno=EOVERFLOW.
- __tzset may set errno (e.g. to ENOENT) and then __mktime may overwrite
  this with errno=EOVERFLOW (when failing) or errno=0 (when return valid
  -1). However, that was already the case also before the patch.

 time/Makefile      |  2 +-
 time/bug-mktime4.c | 27 +++++++++++++++++++++++++++
 time/mktime.c      | 16 +++++++++++-----
 3 files changed, 39 insertions(+), 6 deletions(-)
 create mode 100644 time/bug-mktime4.c

diff --git a/time/Makefile b/time/Makefile
index ec3e39dcea..743bd99f18 100644
--- a/time/Makefile
+++ b/time/Makefile
@@ -43,7 +43,7 @@ tests	:= test_time clocktest tst-posixtz tst-strptime tst_wcsftime \
 	   tst-getdate tst-mktime tst-mktime2 tst-ftime_l tst-strftime \
 	   tst-mktime3 tst-strptime2 bug-asctime bug-asctime_r bug-mktime1 \
 	   tst-strptime3 bug-getdate1 tst-strptime-whitespace tst-ftime \
-	   tst-tzname tst-y2039
+	   tst-tzname tst-y2039 bug-mktime4
 
 include ../Rules
 
diff --git a/time/bug-mktime4.c b/time/bug-mktime4.c
new file mode 100644
index 0000000000..14d04c669b
--- /dev/null
+++ b/time/bug-mktime4.c
@@ -0,0 +1,27 @@
+#include <time.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdio.h>
+#include <string.h>
+
+static int
+do_test (void)
+{
+  struct tm tm = { .tm_year = INT_MIN, .tm_mon = INT_MIN, .tm_mday = INT_MIN,
+		    .tm_hour = INT_MIN, .tm_min = INT_MIN, .tm_sec = INT_MIN };
+  errno = 0;
+  time_t tt = mktime (&tm);
+  if (tt != -1)
+    {
+      printf ("mktime() should have returned -1, returned %ld\n", (long int) tt);
+      return 1;
+    }
+  if (errno != EOVERFLOW)
+    {
+      printf ("mktime() returned -1, errno should be %d (EOVERFLOW) but is %d (%s)\n", EOVERFLOW, errno, strerror(errno));
+      return 1;
+    }
+  return 0;
+}
+
+#include "support/test-driver.c"
diff --git a/time/mktime.c b/time/mktime.c
index 00f0dec6b4..2e0c467147 100644
--- a/time/mktime.c
+++ b/time/mktime.c
@@ -49,6 +49,7 @@
 # define LEAP_SECONDS_POSSIBLE 1
 #endif
 
+#include <errno.h>
 #include <time.h>
 
 #include <limits.h>
@@ -435,7 +436,10 @@ __mktime_internal (struct tm *tp,
 	 useful than returning -1.  */
       goto offset_found;
     else if (--remaining_probes == 0)
-      return -1;
+      {
+	__set_errno (EOVERFLOW);
+	return -1;
+      }
 
   /* We have a match.  Check whether tm.tm_isdst has the requested
      value, if any.  */
@@ -507,7 +511,10 @@ __mktime_internal (struct tm *tp,
       if (INT_ADD_WRAPV (t, sec_adjustment, &t)
 	  || ! (mktime_min <= t && t <= mktime_max)
 	  || ! convert_time (convert, t, &tm))
-	return -1;
+	{
+	  __set_errno (EOVERFLOW);
+	  return -1;
+	}
     }
 
   *tp = tm;
@@ -522,13 +529,12 @@ __mktime_internal (struct tm *tp,
 time_t
 mktime (struct tm *tp)
 {
+# if defined _LIBC || NEED_MKTIME_WORKING
+  static mktime_offset_t localtime_offset;
   /* POSIX.1 8.1.1 requires that whenever mktime() is called, the
      time zone names contained in the external variable 'tzname' shall
      be set as if the tzset() function had been called.  */
   __tzset ();
-
-# if defined _LIBC || NEED_MKTIME_WORKING
-  static mktime_offset_t localtime_offset;
   return __mktime_internal (tp, __localtime_r, &localtime_offset);
 # else
 #  undef mktime
-- 
2.17.1