This is the mail archive of the
gdb@sourceware.cygnus.com
mailing list for the GDB project.
GDB and Dragonball EZ.
- To: "'gdb mail list'" <gdb at sourceware dot cygnus dot com>
- Subject: GDB and Dragonball EZ.
- From: David Williams <davidwilliams at ozemail dot com dot au>
- Date: Mon, 22 Nov 1999 22:30:45 +1100
- Organization: DLC software P/L
- Reply-To: "davidwilliams at ozemail dot com dot au" <davidwilliams at ozemail dot com dot au>
Hi All,
I need some help to get started in modifying the appropriate parts of GDB
so that I can remotely debug my system.
I am using the Motorola MC68EZ328 (Dragonball EZ). It has a hardware
breakpoint capability built in (not BDM as Dragonball is a 68000 core not
CPU32). The hardware breakpoint capability would seem to be peculiar to
this processor so I believe I will have to modify some parts(drivers etc)
of GDB to use it. The processors breakpoint facility allows you to define a
single address (and mask for ranges) to set a break-point on for either
instruction or data accesses - read or write. This is great as can then set
break-points in code without having to have code in RAM! A small problem is
it only allows one hardware breakpoint to be set at a time.
Another "small" problem is that I don't have a spare RS-232 port to
communicate to GDB with. I have only one on my system. I have two options,
as I see it. Firstly I could share the serial port between GDB and my
application. One problem with this approach is will make debugging the IrDA
part of my application more difficult. Secondly I could try and implement a
software UART using the handshaking lines. Currently I think this second
option may be better as long as a simple half duplex software UART can be
implemented and provide adequate communications.
Anyway what I would like to know is which parts of GDB to look at and what
existing drivers/stubs etc I should use as templates for modification? Are
DLDT drivers appropriate? Is GDB stub ("remote target") appropriate?
Please point me in the right direction I am currently lost in a sea of
documentation and source code with no maps!
Note: I am currenty using ECGS 1.1.2 and have downloaded GDB 4.18
distribution.
TIA
David Williams
davidwilliams@ozemail.com.au