This is the mail archive of the gdb-testers@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Failures on Debian-s390x-native-extended-gdbserver-m64, branch master


Buildslave:
	debian-wheezy-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/1539>

Commit(s) tested:
	651657fa61aa0a2946d56063295a7ce8d73f803b

Author(s) (in the same order as the commits):
	Matthew Wahab <matthew.wahab@arm.com>

Subject:
	[AArch64] Fix missing architecture checks for ARMv8.2 system registers.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 651657fa61aa0a2946d56063295a7ce8d73f803b>

*** Failed to compiled GDB.  ***
============================

+++ The full log is too big to be posted here.
+++ These are the last 100 lines of it.

touch bfdio.stamp
touch libbfd.stamp
./chew -f ../../../binutils-gdb/bfd/doc/doc.str < ../../../binutils-gdb/bfd/doc/../init.c >init.tmp
./chew -f ../../../binutils-gdb/bfd/doc/doc.str < ../../../binutils-gdb/bfd/doc/../hash.c >hash.tmp
test -e syms.texi || test ! -f ../../../binutils-gdb/bfd/doc/syms.texi || cp -p ../../../binutils-gdb/bfd/doc/syms.texi .
./chew -f ../../../binutils-gdb/bfd/doc/doc.str < ../../../binutils-gdb/bfd/doc/../linker.c >linker.tmp
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change syms.tmp syms.texi
touch reloc.stamp
test -e hash.texi || test ! -f ../../../binutils-gdb/bfd/doc/hash.texi || cp -p ../../../binutils-gdb/bfd/doc/hash.texi .
touch opncls.stamp
test -e init.texi || test ! -f ../../../binutils-gdb/bfd/doc/init.texi || cp -p ../../../binutils-gdb/bfd/doc/init.texi .
test -e targets.texi || test ! -f ../../../binutils-gdb/bfd/doc/targets.texi || cp -p ../../../binutils-gdb/bfd/doc/targets.texi .
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change hash.tmp hash.texi
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change targets.tmp targets.texi
test -e linker.texi || test ! -f ../../../binutils-gdb/bfd/doc/linker.texi || cp -p ../../../binutils-gdb/bfd/doc/linker.texi .
./chew -f ../../../binutils-gdb/bfd/doc/doc.str < ../../../binutils-gdb/bfd/doc/../mmo.c >mmo.tmp
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change init.tmp init.texi
touch section.stamp
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change linker.tmp linker.texi
touch syms.stamp
touch hash.stamp
test -e mmo.texi || test ! -f ../../../binutils-gdb/bfd/doc/mmo.texi || cp -p ../../../binutils-gdb/bfd/doc/mmo.texi .
touch targets.stamp
touch init.stamp
/bin/bash ../../../binutils-gdb/bfd/doc/../../move-if-change mmo.tmp mmo.texi
touch mmo.stamp
touch linker.stamp
restore=: && backupdir=".am$$" && \
rm -rf $backupdir && mkdir $backupdir && \
if (/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/binutils-gdb/missing makeinfo --split-size=5000000 --split-size=5000000 --version) >/dev/null 2>&1; then \
  for f in bfd.info bfd.info-[0-9] bfd.info-[0-9][0-9] bfd.i[0-9] bfd.i[0-9][0-9]; do \
    if test -f $f; then mv $f $backupdir; restore=mv; else :; fi; \
  done; \
else :; fi && \
if /home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/binutils-gdb/missing makeinfo --split-size=5000000 --split-size=5000000   -I ../../../binutils-gdb/bfd/doc \
 -o bfd.info `test -f 'bfd.texinfo' || echo '../../../binutils-gdb/bfd/doc/'`bfd.texinfo; \
then \
  rc=0; \
else \
  rc=$?; \
  $restore $backupdir/* `echo "./bfd.info" | sed 's|[^/]*$||'`; \
fi; \
rm -rf $backupdir; exit $rc
/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/binutils-gdb/missing: 81: /home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/binutils-gdb/missing: makeinfo: not found
WARNING: 'makeinfo' is missing on your system.
         You should only need it if you modified a '.texi' file, or
         any other file indirectly affecting the aspect of the manual.
         You might want to install the Texinfo package:
         <http://www.gnu.org/software/texinfo/>
         The spurious makeinfo call might also be the consequence of
         using a buggy 'make' (AIX, DU, IRIX), in which case you might
         want to install GNU make:
         <http://www.gnu.org/software/make/>
Makefile:443: recipe for target 'bfd.info' failed
make[3]: *** [bfd.info] Error 127
make[3]: Leaving directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd/doc'
Making info in po
make[3]: Entering directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd/po'
( if test 'x../../../binutils-gdb/bfd/po' != 'x.'; then \
    posrcprefix='../../../binutils-gdb/bfd/'; \
  else \
    posrcprefix="../"; \
  fi; \
  rm -f SRC-POTFILES-t SRC-POTFILES \
    && (sed -e '/^#/d' \
            -e '/^[ 	]*$/d' \
	    -e "s@.*@	$posrcprefix& \\\\@" < ../../../binutils-gdb/bfd/po/SRC-POTFILES.in \
	| sed -e '$s/\\$//') > SRC-POTFILES-t \
    && chmod a-w SRC-POTFILES-t \
    && mv SRC-POTFILES-t SRC-POTFILES )
( rm -f BLD-POTFILES-t BLD-POTFILES \
    && (sed -e '/^#/d' \
            -e '/^[ 	]*$/d' \
	    -e "s@.*@	../& \\\\@" < ../../../binutils-gdb/bfd/po/BLD-POTFILES.in \
	| sed -e '$s/\\$//') > BLD-POTFILES-t \
    && chmod a-w BLD-POTFILES-t \
    && mv BLD-POTFILES-t BLD-POTFILES )
cd .. \
  && CONFIG_FILES=po/Makefile.in:po/Make-in \
     CONFIG_HEADERS= /bin/bash ./config.status
config.status: creating po/Makefile.in
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: executing bfd_stdint.h commands
config.status: executing default commands
make[3]: Nothing to be done for 'info'.
make[3]: Leaving directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd/po'
make[3]: Entering directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd'
make[3]: Nothing to be done for 'info-am'.
make[3]: Leaving directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd'
Makefile:1679: recipe for target 'info-recursive' failed
make[2]: *** [info-recursive] Error 1
make[2]: Leaving directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/bfd'
Makefile:2719: recipe for target 'all-bfd' failed
make[1]: Leaving directory '/home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build'
make[1]: *** [all-bfd] Error 2
make: *** [all] Error 2
Makefile:846: recipe for target 'all' failed
============================




Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]