This is the mail archive of the gdb-patches@sourceware.org mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: [PATCH 2/2] gdbserver: Move detach code to its own function


On 2017-09-15 15:35, Simon Marchi wrote:
The code required to handle the 'D' packet is non trivial, so move it
out to its own function.

The moved out code is identical, except for the call to strtol and some
breaks that became returns.

Tested manually, and by running gdb.base/*detach*.exp with
native-gdbserver and native-extended-gdbserver.

gdb/gdbserver/ChangeLog:

	* server.c (handle_detach): New function.
	(process_serial_event): Move code out, call handle_detach.
---
gdb/gdbserver/server.c | 179 +++++++++++++++++++++++++------------------------
 1 file changed, 93 insertions(+), 86 deletions(-)

diff --git a/gdb/gdbserver/server.c b/gdb/gdbserver/server.c
index 8e0bf5b..59d648d 100644
--- a/gdb/gdbserver/server.c
+++ b/gdb/gdbserver/server.c
@@ -1157,6 +1157,98 @@ handle_search_memory (char *own_buf, int packet_len)
   free (pattern);
 }

+static void
+handle_detach (char *own_buf)
+{
+  require_running_or_return (own_buf);
+
+  int pid;
+
+  if (multi_process)
+    {
+      /* skip 'D;' */
+      pid = strtol (&own_buf[2], NULL, 16);
+    }
+  else
+    pid = ptid_get_pid (current_ptid);
+
+  if ((tracing && disconnected_tracing) || any_persistent_commands ())
+    {
+      struct process_info *process = find_process_pid (pid);
+
+      if (process == NULL)
+	{
+	  write_enn (own_buf);
+	  return;
+	}
+
+      if (tracing && disconnected_tracing)
+	fprintf (stderr,
+		 "Disconnected tracing in effect, "
+		 "leaving gdbserver attached to the process\n");
+
+      if (any_persistent_commands ())
+	fprintf (stderr,
+		 "Persistent commands are present, "
+		 "leaving gdbserver attached to the process\n");
+
+      /* Make sure we're in non-stop/async mode, so we we can both
+	 wait for an async socket accept, and handle async target
+	 events simultaneously.  There's also no point either in
+	 having the target stop all threads, when we're going to
+	 pass signals down without informing GDB.  */
+      if (!non_stop)
+	{
+	  if (debug_threads)
+	    debug_printf ("Forcing non-stop mode\n");
+
+	  non_stop = 1;
+	  start_non_stop (1);
+	}
+
+      process->gdb_detached = 1;
+
+      /* Detaching implicitly resumes all threads.  */
+      target_continue_no_signal (minus_one_ptid);
+
+      write_ok (own_buf);
+      return;
+    }
+
+  fprintf (stderr, "Detaching from process %d\n", pid);
+  stop_tracing ();
+  if (detach_inferior (pid) != 0)
+    write_enn (own_buf);
+  else
+    {
+      discard_queued_stop_replies (pid_to_ptid (pid));
+      write_ok (own_buf);
+
+      if (extended_protocol || target_running ())
+	{
+	  /* There is still at least one inferior remaining or
+	     we are in extended mode, so don't terminate gdbserver,
+	     and instead treat this like a normal program exit.  */
+	  last_status.kind = TARGET_WAITKIND_EXITED;
+	  last_status.value.integer = 0;
+	  last_ptid = pid_to_ptid (pid);
+
+	  current_thread = NULL;
+	}
+      else
+	{
+	  putpkt (own_buf);
+	  remote_close ();
+
+	  /* If we are attached, then we can exit.  Otherwise, we
+	     need to hang around doing nothing, until the child is
+	     gone.  */
+	  join_inferior (pid);
+	  exit (0);
+	}
+    }
+}
+
 /* Parse options to --debug-format= and "monitor set debug-format".
ARG is the text after "--debug-format=" or "monitor set debug-format". IS_MONITOR is non-zero if we're invoked via "monitor set debug-format".
@@ -4009,7 +4101,6 @@ process_serial_event (void)
   unsigned int len;
   int res;
   CORE_ADDR mem_addr;
-  int pid;
   unsigned char sig;
   int packet_len;
   int new_packet_len = -1;
@@ -4037,91 +4128,7 @@ process_serial_event (void)
       handle_general_set (own_buf);
       break;
     case 'D':
-      require_running_or_break (own_buf);
-
-      if (multi_process)
-	{
-	  i++; /* skip ';' */
-	  pid = strtol (&own_buf[i], NULL, 16);
-	}
-      else
-	pid = ptid_get_pid (current_ptid);
-
- if ((tracing && disconnected_tracing) || any_persistent_commands ())
-	{
-	  struct process_info *process = find_process_pid (pid);
-
-	  if (process == NULL)
-	    {
-	      write_enn (own_buf);
-	      break;
-	    }
-
-	  if (tracing && disconnected_tracing)
-	    fprintf (stderr,
-		     "Disconnected tracing in effect, "
-		     "leaving gdbserver attached to the process\n");
-
-	  if (any_persistent_commands ())
-	    fprintf (stderr,
-		     "Persistent commands are present, "
-		     "leaving gdbserver attached to the process\n");
-
-	  /* Make sure we're in non-stop/async mode, so we we can both
-	     wait for an async socket accept, and handle async target
-	     events simultaneously.  There's also no point either in
-	     having the target stop all threads, when we're going to
-	     pass signals down without informing GDB.  */
-	  if (!non_stop)
-	    {
-	      if (debug_threads)
-		debug_printf ("Forcing non-stop mode\n");
-
-	      non_stop = 1;
-	      start_non_stop (1);
-	    }
-
-	  process->gdb_detached = 1;
-
-	  /* Detaching implicitly resumes all threads.  */
-	  target_continue_no_signal (minus_one_ptid);
-
-	  write_ok (own_buf);
-	  break; /* from switch/case */
-	}
-
-      fprintf (stderr, "Detaching from process %d\n", pid);
-      stop_tracing ();
-      if (detach_inferior (pid) != 0)
-	write_enn (own_buf);
-      else
-	{
-	  discard_queued_stop_replies (pid_to_ptid (pid));
-	  write_ok (own_buf);
-
-	  if (extended_protocol || target_running ())
-	    {
-	      /* There is still at least one inferior remaining or
-		 we are in extended mode, so don't terminate gdbserver,
-		 and instead treat this like a normal program exit.  */
-	      last_status.kind = TARGET_WAITKIND_EXITED;
-	      last_status.value.integer = 0;
-	      last_ptid = pid_to_ptid (pid);
-
-	      current_thread = NULL;
-	    }
-	  else
-	    {
-	      putpkt (own_buf);
-	      remote_close ();
-
-	      /* If we are attached, then we can exit.  Otherwise, we
-		 need to hang around doing nothing, until the child is
-		 gone.  */
-	      join_inferior (pid);
-	      exit (0);
-	    }
-	}
+      handle_detach (own_buf);
       break;
     case '!':
       extended_protocol = 1;

Self-comment: the variable i in process_serial_event becomes useless, I'll remove it before pushing.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]