[PATCH] Add micromips support to the MIPS simulator

[Andrew Bennett <Andrew dot Bennett at imgtec dot com>]

Hi,

This patch adds support for micromips to the MIPS simulator.  For more
information on micromips ASE please refer to the following URL:
http://www.imgtec.com/mips/architectures/mips32.asp, which also contains links to
the ISA documentation.

I have refactored the exisiting MIPS backend to place common instruction code
into functions.  I have then added the micromips instruction definitions.  Finally 
I have added the build system and testsuite support.

To test the new backend I have extended the current MIPS tests to support
micromips.  I have also run it through the GCC testsuite.  

The patch is attached to this email, and the ChangeLog entry is below:

Ok to commit?

Many thanks,


Andrew


2015-01-21  Andrew Bennett  <andrew.bennett@imgtec.com>
 	      Ali Lown  <ali.lown@imgtec.com>

	sim/common/
	* sim-bits.h (EXTEND6): New macro.
	(EXTEND12): New macro. 
	(EXTEND25): New macro.

	sim/mips/
	* Makefile.in (tmp-micromips): New rule.	
	(tmp-mach-multi): Add support for micromips.	
	* configure.ac (mips*-sde-elf* | mips*-mti-elf*): Made a multi sim
	that works for both mips64 and micromips64.
	(mipsisa32r2*-*-*): Made a multi sim that works for mips32 and
	micromips32.
	Add build support for micromips.
	* dsp.igen (do_ph_s_absq, do_w_s_absq, do_qb_s_absq, do_addsc, 
	do_addwc, do_bitrev, do_extpv, do_extrv, do_extrv_s_h, do_insv, 
	do_lxx do_modsub, do_mthlip, do_mulsaq_s_w_ph, do_ph_packrl, do_qb_pick
	do_ph_pick, do_qb_ph_precequ, do_qb_ph_preceu, do_w_preceq
	do_w_ph_precrq, do_ph_qb_precrq, do_w_ph_rs_precrq do_qb_w_raddu, 
	do_rddsp, do_repl, do_shilov, do_ph_shl, do_qb_shl do_w_s_shllv, 
	do_ph_shrlv, do_w_r_shrav, do_wrdsp, do_qb_shrav, do_append, 
	do_balign, do_ph_w_mulsa, do_ph_qb_precr, do_prepend): New functions.
	Refactored instruction code to use these functions.
	* dsp2.igen: Refactored instruction code to use the new functions.
	* interp.c (decode_coproc): Refactored to work with any instruction
	encoding.
	(isa_mode): New variable 
	(RSVD_INSTRUCTION): Changed to 0x00000039.
	* m16.igen (BREAK16): Refactored instruction to use do_break16.
	(JALX32): Add mips32, mips64, mips32r2 and mips64r2 models.
	* micromips.dc: New file.
	* micromips.igen: New file. 
	* micromips16.dc: New file.
	* micromipsdsp.igen: New file.
	* micromipsrun.c: New file.
	* mips.igen (do_swc1): Changed to work with any instruction encoding.
	(do_add do_addi do_andi do_dadd do_daddi do_dsll32 do_dsra32
	do_dsrl32, do_dsub, do_break, do_break16, do_clo, do_clz, do_dclo
	do_dclz, do_lb, do_lh, do_lwr, do_lwl, do_lwc, do_lw, do_lwu, do_lhu
	do_ldc, do_lbu, do_ll, do_lld, do_lui, do_madd, do_dsp_madd, do_maddu
	do_dsp_maddu, do_dsp_mfhi, do_dsp_mflo, do_movn, do_movz, do_msub
	do_dsp_msub, do_msubu, do_dsp_msubu, do_mthi, do_dsp_mthi, do_mtlo
	do_dsp_mtlo, do_mul, do_dsp_mult, do_dsp_multu, do_pref, do_sc, do_scd
	do_sub, do_sw, do_teq, do_teqi, do_tge, do_tgei, do_tgeiu, do_tgeu, do_tlt
	do_tlti, do_tltiu, do_tltu, do_tne, do_tnei, do_abs_fmt, do_add_fmt
	do_alnv_ps, do_c_cond_fmt, do_ceil_fmt, do_cfc1, do_ctc1, do_cvt_d_fmt
	do_cvt_l_fmt, do_cvt_ps_s, do_cvt_s_fmt, do_cvt_s_pl, do_cvt_s_pu
	do_cvt_w_fmt, do_div_fmt, do_dmfc1b, do_dmtc1b, do_floor_fmt, do_luxc1_32
	do_luxc1_64, do_lwc1, do_lwxc1, do_madd_fmt, do_mfc1b, do_mov_fmt, do_movtf
	do_movtf_fmt, do_movn_fmt, do_movz_fmt, do_msub_fmt, do_mtc1b, do_mul_fmt
	do_neg_fmt, do_nmadd_fmt, do_nmsub_fmt, do_pll_ps, do_plu_ps, do_pul_ps
	do_puu_ps, do_recip_fmt, do_round_fmt, do_rsqrt_fmt, do_prefx, do_sdc1
	do_suxc1_32, do_suxc1_64, do_sqrt_fmt, do_sub_fmt, do_swc1, do_swxc1
	do_trunc_fmt): New functions, refactored from existing instructions.
	Refactored instruction code to use these functions.
	(RSVD): Changed to use new reserved instruction.
	(loadstore_ea, not_word_value, unpredictable, check_mt_hilo, check_mf_hilo, 
	check_mult_hilo, check_div_hilo, check_u64, do_luxc1_32, do_sdc1, do_suxc1_32, 
	check_fmt_p, check_fpu, do_load_double, do_store_double):  Added micromips32 
	and micromips64 models.
	Added include for micromips.igen and micromipsdsp.igen
	Add micromips32 and micromips64 models.
	(DecodeCoproc): Updated to use new macro definition.
	* mips3264r2.igen (do_dsbh, do_dshd, do_dext, do_dextm, do_dextu, do_di, 
	do_dins, do_dinsm, do_ei, do_ext, do_mfhc1, do_mthc1, do_ins, do_dinsu, 
	do_seb, do_seh do_rdhwr, do_wsbh): New functions.
	Refactored instruction code to use these functions.
	* sim-main.h (CP0_operation): New enum.
	(DecodeCoproc): Updated macro.
	(IMEM32_MICROMIPS, IMEM16_MICROMIPS, MICROMIPS_MINOR_OPCODE, 
	MICROMIPS_DELAYSLOT_SIZE_ANY, MICROMIPS_DELAYSLOT_SIZE_16, MICROMIPS_DELAYSLOT_SIZE_32,
	ISA_MODE_MIPS32 and ISA_MODE_MICROMIPS): New defines.

	sim/testsuite/sim/mips/
       * basic.exp (run_micromips_test, run_sim_tests): New functions
	Add support for micromips tests. 
	* hilo-hazard-4.s: New file.
	* testutils.inc (_dowrite): Changed reserved instruction encoding.
	(writemsg): Moved the la and li instructions before the data they are 
	assigned to, which prevents a bug where MIPS32 relocations are used instead 
	of micromips relocations when building for micromips.


Andrew Bennett
Software Design Engineer, MIPS Processor IP
Imagination Technologies Limited
t: +44 (0)113 2429814
www.imgtec.com

Attachment: Add-micromips-support-to-MIPS-simulator.patch.gz
Description: Add-micromips-support-to-MIPS-simulator.patch.gz