This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
PATCH: Restore "sp" and support "ah", "bh", "ch", "dh" in amd64
- From: "H.J. Lu" <hongjiu dot lu at intel dot com>
- To: GDB <gdb-patches at sourceware dot org>
- Date: Thu, 11 Mar 2010 22:06:36 -0800
- Subject: PATCH: Restore "sp" and support "ah", "bh", "ch", "dh" in amd64
- References: <20100303205313.GA25695@intel.com>
- Reply-to: "H.J. Lu" <hjl dot tools at gmail dot com>
On Wed, Mar 03, 2010 at 12:53:13PM -0800, H.J. Lu wrote:
> Hi,
>
> AMD64 can access "ah", "bh", "ch", "dh". I missed them in my x86
> pseudo register support. This patch adds them. OK to install?
>
This patch also restores the old "sp" for x86. OK to install?
Thanks.
H.J.
---
gdb/
2010-03-11 H.J. Lu <hongjiu.lu@intel.com>
* amd64-tdep.c (amd64_byte_names): Add "ah", "bh", "ch", "dh".
(amd64_word_names): Replace "sp" with "".
(amd64_pseudo_register_read): Handle "ah", "bh", "ch", "dh".
(amd64_pseudo_register_write): Likewise.
(amd64_init_abi): Set num_byte_regs to 20.
* i386-tdep.c (i386_word_names): Replace "sp" with "".
gdb/testsuite/
2010-03-11 H.J. Lu <hongjiu.lu@intel.com>
* gdb.arch/amd64-byte.exp: Check "ah", "bh", "ch", "dh".
diff --git a/gdb/amd64-tdep.c b/gdb/amd64-tdep.c
index 8c41a8a..e929967 100644
--- a/gdb/amd64-tdep.c
+++ b/gdb/amd64-tdep.c
@@ -215,14 +215,15 @@ amd64_arch_reg_to_regnum (int reg)
static const char *amd64_byte_names[] =
{
"al", "bl", "cl", "dl", "sil", "dil", "bpl", "spl",
- "r8l", "r9l", "r10l", "r11l", "r12l", "r13l", "r14l", "r15l"
+ "r8l", "r9l", "r10l", "r11l", "r12l", "r13l", "r14l", "r15l",
+ "ah", "bh", "ch", "dh"
};
/* Register names for word pseudo-registers. */
static const char *amd64_word_names[] =
{
- "ax", "bx", "cx", "dx", "si", "di", "bp", "sp",
+ "ax", "bx", "cx", "dx", "si", "di", "bp", "",
"r8w", "r9w", "r10w", "r11w", "r12w", "r13w", "r14w", "r15w"
};
@@ -263,8 +264,17 @@ amd64_pseudo_register_read (struct gdbarch *gdbarch,
int gpnum = regnum - tdep->al_regnum;
/* Extract (always little endian). */
- regcache_raw_read (regcache, gpnum, raw_buf);
- memcpy (buf, raw_buf, 1);
+ if (gpnum >= 16)
+ {
+ /* Special handling for AH, BH, CH, DH. */
+ regcache_raw_read (regcache, gpnum - 16, raw_buf);
+ memcpy (buf, raw_buf + 1, 1);
+ }
+ else
+ {
+ regcache_raw_read (regcache, gpnum, raw_buf);
+ memcpy (buf, raw_buf, 1);
+ }
}
else if (i386_dword_regnum_p (gdbarch, regnum))
{
@@ -289,12 +299,24 @@ amd64_pseudo_register_write (struct gdbarch *gdbarch,
{
int gpnum = regnum - tdep->al_regnum;
- /* Read ... */
- regcache_raw_read (regcache, gpnum, raw_buf);
- /* ... Modify ... (always little endian). */
- memcpy (raw_buf, buf, 1);
- /* ... Write. */
- regcache_raw_write (regcache, gpnum, raw_buf);
+ if (gpnum >= 16)
+ {
+ /* Read ... AH, BH, CH, DH. */
+ regcache_raw_read (regcache, gpnum - 16, raw_buf);
+ /* ... Modify ... (always little endian). */
+ memcpy (raw_buf + 1, buf, 1);
+ /* ... Write. */
+ regcache_raw_write (regcache, gpnum - 16, raw_buf);
+ }
+ else
+ {
+ /* Read ... */
+ regcache_raw_read (regcache, gpnum, raw_buf);
+ /* ... Modify ... (always little endian). */
+ memcpy (raw_buf, buf, 1);
+ /* ... Write. */
+ regcache_raw_write (regcache, gpnum, raw_buf);
+ }
}
else if (i386_dword_regnum_p (gdbarch, regnum))
{
@@ -2228,7 +2250,7 @@ amd64_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
tdep->num_core_regs = AMD64_NUM_GREGS + I387_NUM_REGS;
tdep->register_names = amd64_register_names;
- tdep->num_byte_regs = 16;
+ tdep->num_byte_regs = 20;
tdep->num_word_regs = 16;
tdep->num_dword_regs = 16;
/* Avoid wiring in the MMX registers for now. */
diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
index f386237..83275ac 100644
--- a/gdb/i386-tdep.c
+++ b/gdb/i386-tdep.c
@@ -94,7 +94,7 @@ static const char *i386_byte_names[] =
static const char *i386_word_names[] =
{
"ax", "cx", "dx", "bx",
- "sp", "bp", "si", "di"
+ "", "bp", "si", "di"
};
/* MMX register? */
diff --git a/gdb/testsuite/gdb.arch/amd64-byte.exp b/gdb/testsuite/gdb.arch/amd64-byte.exp
index 9a14099..c76876b 100644
--- a/gdb/testsuite/gdb.arch/amd64-byte.exp
+++ b/gdb/testsuite/gdb.arch/amd64-byte.exp
@@ -52,7 +52,6 @@ if ![runto_main] then {
gdb_suppress_tests
}
-set nr_regs 14
set byte_regs(1) al
set byte_regs(2) bl
set byte_regs(3) cl
@@ -67,6 +66,10 @@ set byte_regs(11) r12l
set byte_regs(12) r13l
set byte_regs(13) r14l
set byte_regs(14) r15l
+set byte_regs(15) ah
+set byte_regs(16) bh
+set byte_regs(17) ch
+set byte_regs(18) dh
gdb_test "break [gdb_get_line_number "first breakpoint here"]" \
"Breakpoint .* at .*${srcfile}.*" \
@@ -79,12 +82,19 @@ for { set r 1 } { $r <= 6 } { incr r } {
"check contents of %$byte_regs($r)"
}
+for { set r 1 } { $r <= 4 } { incr r } {
+ set h [expr $r + 14]
+ gdb_test "print/x \$$byte_regs($h)" \
+ ".. = 0x[format %x $r]2" \
+ "check contents of %$byte_regs($h)"
+}
+
gdb_test "break [gdb_get_line_number "second breakpoint here"]" \
"Breakpoint .* at .*${srcfile}.*" \
"set second breakpoint in main"
gdb_continue_to_breakpoint "continue to second breakpoint in main"
-for { set r 7 } { $r <= $nr_regs } { incr r } {
+for { set r 7 } { $r <= 14 } { incr r } {
gdb_test "print/x \$$byte_regs($r)" \
".. = 0x[format %x $r]1" \
"check contents of %$byte_regs($r)"
@@ -94,6 +104,11 @@ for { set r 1 } { $r <= 6 } { incr r } {
gdb_test "set var \$$byte_regs($r) = $r" "" "set %$byte_regs($r)"
}
+for { set r 1 } { $r <= 4 } { incr r } {
+ set h [expr $r + 14]
+ gdb_test "set var \$$byte_regs($h) = $h" "" "set %$byte_regs($h)"
+}
+
gdb_test "break [gdb_get_line_number "third breakpoint here"]" \
"Breakpoint .* at .*${srcfile}.*" \
"set third breakpoint in main"
@@ -105,7 +120,14 @@ for { set r 1 } { $r <= 6 } { incr r } {
"check contents of %$byte_regs($r)"
}
-for { set r 7 } { $r <= $nr_regs } { incr r } {
+for { set r 1 } { $r <= 4 } { incr r } {
+ set h [expr $r + 14]
+ gdb_test "print \$$byte_regs($h)" \
+ ".. = $h" \
+ "check contents of %$byte_regs($h)"
+}
+
+for { set r 7 } { $r <= 14 } { incr r } {
gdb_test "set var \$$byte_regs($r) = $r" "" "set %$byte_regs($r)"
}
@@ -114,7 +136,7 @@ gdb_test "break [gdb_get_line_number "forth breakpoint here"]" \
"set forth breakpoint in main"
gdb_continue_to_breakpoint "continue to forth breakpoint in main"
-for { set r 7 } { $r <= $nr_regs } { incr r } {
+for { set r 7 } { $r <= 14 } { incr r } {
gdb_test "print \$$byte_regs($r)" \
".. = $r" \
"check contents of %$byte_regs($r)"