This is the mail archive of the
gdb-patches@sourceware.org
mailing list for the GDB project.
Re: [non-stop] 07/10 non-stop inferior control
- From: Pedro Alves <pedro at codesourcery dot com>
- To: Daniel Jacobowitz <drow at false dot org>
- Cc: gdb-patches at sourceware dot org
- Date: Wed, 2 Jul 2008 04:33:52 +0100
- Subject: Re: [non-stop] 07/10 non-stop inferior control
- References: <200806152205.16824.pedro@codesourcery.com> <20080625194409.GF25575@caradoc.them.org>
A Wednesday 25 June 2008 20:44:09, Daniel Jacobowitz wrote:
> On Sun, Jun 15, 2008 at 10:05:16PM +0100, Pedro Alves wrote:
> > It is also needed to have support to interrupt/suspend a simple
> > thread so a new target_stop_ptid method was added to request
> > the target to interrupt a single thread.
>
> How about adding a ptid argument to to_stop instead? I think the code
> will be shared in most cases.
Here it is, then.
>
> > @@ -1810,11 +1847,16 @@ handle_inferior_event (struct execution_
> > && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED &&
> > ecs->new_thread_event) add_thread (ecs->ptid);
> >
> > - /* Mark all threads as not-executing. In non-stop, this should be
> > - adjusted to only mark ecs->ptid. */
> > - if (ecs->ws.kind != TARGET_WAITKIND_IGNORE
> > - && stop_soon != STOP_QUIETLY)
> > - set_executing (pid_to_ptid (-1), 0);
> > + if (ecs->ws.kind != TARGET_WAITKIND_IGNORE)
> > + {
> > + /* Mark the stopped threads accordingly. */
> > + if (!non_stop
> > + || ecs->ws.kind == TARGET_WAITKIND_EXITED
> > + || ecs->ws.kind == TARGET_WAITKIND_SIGNALLED)
> > + set_executing (pid_to_ptid (-1), 0);
> > + else
> > + set_executing (ecs->ptid, 0);
> > + }
> >
> > switch (ecs->ws.kind)
> > {
>
> Are we going to miss the stop_soon check here?
AFAICT, we're not. I dropped it in the patch that was
introducing it.
> > - add_prefix_cmd ("thread", class_run, thread_command, _("\
> > + c = add_prefix_cmd ("thread", class_run, thread_command, _("\
> > Use this command to switch between threads.\n\
> > The new thread ID must be currently known."),
> > &thread_cmd_list, "thread ", 1, &cmdlist);
>
> Indentation on that last line.
>
> Otherwise OK.
Thanks. Updated patch adds a ptid_t argument to target_stop, and
fixes enough targets to build on linux. Patch to update all other
targets to the new target_stop interface comming up. Nothing else
changed.
Still OK, in combination with the next patch (7.2)?
--
Pedro Alves
2008-07-02 Pedro Alves <pedro@codesourcery.com>
Non-stop inferior control.
* infrun.c (resume): In non-stop mode, always resume just one
thread.
(proceed): Don't call prepare_to_proceed in non-stop mode.
(fetch_inferior_event): In non-stop mode, switch context before
handling the event.
(error_is_running, ensure_not_running): New.
(handle_inferior_event): In non-stop mode: Mark only the event
thread as stopped. Require that the target module manages adding
threads to the thread list. Assert that there isn't a
deferred_step_ptid set. Don't switch to infwait_thread_hop_state.
(normal_stop): Only mark not-running if inferior hasn't exited.
In non-stop mode, only mark the event thread.
* thread.c:Include "cli/cli-decode.h".
(print_thread_info): Don't read from a running thread.
Output "(running)" if thread is running.
(switch_to_thread): Don't read stop_pc if thread is executing.
(do_restore_current_thread_cleanup): Don't write to a running
thread.
(thread_apply_all_command): Don't read from a running thread. In
non-stop mode, do a full context-switch instead of just switching
threads.
(thread_apply_command): In non-stop mode, do a full context-switch
instead of just switching threads.
(do_captured_thread_select): Likewise. Inform user if selected
thread is running.
(_initialize_thread): Mark "info threads" and "thread" and
async_ok.
* inf-loop.c (inferior_event_handler): In non-stop mode, don't
unregister the target from the event loop.
* infcmd.c (continue_command, step_1, jump_command)
(signal_command): Ensure the selected thread isn't running.
(interrupt_target_command): In non-stop mode, interrupt only the
selected thread.
* inferior.h (error_is_running, ensure_not_running): Declare.
* target.h (struct target_ops): Add ptid argument to the to_stop
member.
(target_stop): Add ptid_t argument.
* target.c (update_current_target): Add ptid argument to to_stop's
type.
(debug_to_stop): Add ptid_t argument.
(debug_to_rcmd): Set to_stop_ptid.
* remote.c (remote_stop): Add ptid_t argument.
(async_remote_interrupt): Add inferior_ptid to target_stop.
* inf-ptrace.c (inf_ptrace_stop): Add ptid argument.
* Makefile.in (thread.o): Depend on $(cli_decode_h).
---
gdb/Makefile.in | 2
gdb/inf-loop.c | 14 ++++--
gdb/inf-ptrace.c | 2
gdb/infcmd.c | 7 ++-
gdb/inferior.h | 6 ++
gdb/infrun.c | 123 ++++++++++++++++++++++++++++++++++++++++++-------------
gdb/remote.c | 6 +-
gdb/target.c | 11 ++--
gdb/target.h | 4 -
gdb/thread.c | 99 ++++++++++++++++++++++++++++++++------------
10 files changed, 201 insertions(+), 73 deletions(-)
Index: src/gdb/infrun.c
===================================================================
--- src.orig/gdb/infrun.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/infrun.c 2008-07-01 23:03:37.000000000 +0100
@@ -1052,9 +1052,15 @@ a command like `return' or `jump' to con
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on)
- || (scheduler_mode == schedlock_step
- && (step || singlestep_breakpoints_inserted_p)))
+ if (non_stop)
+ {
+ /* With non-stop mode on, threads are always handled
+ individually. */
+ resume_ptid = inferior_ptid;
+ }
+ else if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
@@ -1215,19 +1221,27 @@ proceed (CORE_ADDR addr, enum target_sig
"infrun: proceed (addr=0x%s, signal=%d, step=%d)\n",
paddr_nz (addr), siggnal, step);
- /* In a multi-threaded task we may select another thread
- and then continue or step.
+ if (non_stop)
+ /* In non-stop, each thread is handled individually. The context
+ must already be set to the right thread here. */
+ ;
+ else
+ {
+ /* In a multi-threaded task we may select another thread and
+ then continue or step.
- But if the old thread was stopped at a breakpoint, it
- will immediately cause another breakpoint stop without
- any execution (i.e. it will report a breakpoint hit
- incorrectly). So we must step over it first.
-
- prepare_to_proceed checks the current thread against the thread
- that reported the most recent event. If a step-over is required
- it returns TRUE and sets the current thread to the old thread. */
- if (prepare_to_proceed (step))
- oneproc = 1;
+ But if the old thread was stopped at a breakpoint, it will
+ immediately cause another breakpoint stop without any
+ execution (i.e. it will report a breakpoint hit incorrectly).
+ So we must step over it first.
+
+ prepare_to_proceed checks the current thread against the
+ thread that reported the most recent event. If a step-over
+ is required it returns TRUE and sets the current thread to
+ the old thread. */
+ if (prepare_to_proceed (step))
+ oneproc = 1;
+ }
if (oneproc)
{
@@ -1531,6 +1545,15 @@ fetch_inferior_event (void *client_data)
else
ecs->ptid = target_wait (waiton_ptid, &ecs->ws);
+ if (non_stop
+ && ecs->ws.kind != TARGET_WAITKIND_IGNORE
+ && ecs->ws.kind != TARGET_WAITKIND_EXITED
+ && ecs->ws.kind != TARGET_WAITKIND_SIGNALLED)
+ /* In non-stop mode, each thread is handled individually. Switch
+ early, so the global state is set correctly for this
+ thread. */
+ context_switch (ecs->ptid);
+
/* Now figure out what to do with the result of the result. */
handle_inferior_event (ecs);
@@ -1741,6 +1764,20 @@ init_infwait_state (void)
infwait_state = infwait_normal_state;
}
+void
+error_is_running (void)
+{
+ error (_("\
+Cannot execute this command while the selected thread is running."));
+}
+
+void
+ensure_not_running (void)
+{
+ if (is_running (inferior_ptid))
+ error_is_running ();
+}
+
/* Given an execution control state that has been freshly filled in
by an event from the inferior, figure out what it means and take
appropriate action. */
@@ -1814,10 +1851,16 @@ handle_inferior_event (struct execution_
&& ecs->ws.kind != TARGET_WAITKIND_SIGNALLED && ecs->new_thread_event)
add_thread (ecs->ptid);
- /* Mark all threads as not-executing. In non-stop, this should be
- adjusted to only mark ecs->ptid. */
if (ecs->ws.kind != TARGET_WAITKIND_IGNORE)
- set_executing (pid_to_ptid (-1), 0);
+ {
+ /* Mark the non-executing threads accordingly. */
+ if (!non_stop
+ || ecs->ws.kind == TARGET_WAITKIND_EXITED
+ || ecs->ws.kind == TARGET_WAITKIND_SIGNALLED)
+ set_executing (pid_to_ptid (-1), 0);
+ else
+ set_executing (ecs->ptid, 0);
+ }
switch (ecs->ws.kind)
{
@@ -2055,15 +2098,22 @@ handle_inferior_event (struct execution_
return;
}
- /* We may want to consider not doing a resume here in order to give
- the user a chance to play with the new thread. It might be good
- to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens automatically in
- either the OS or the native code). Therefore we need to continue
- all threads in order to make progress. */
if (ecs->new_thread_event)
{
+ if (non_stop)
+ /* Non-stop assumes that the target handles adding new threads
+ to the thread list. */
+ internal_error (__FILE__, __LINE__, "\
+targets should add new threads to the thread list themselves in non-stop mode.");
+
+ /* We may want to consider not doing a resume here in order to
+ give the user a chance to play with the new thread. It might
+ be good to make that a user-settable option. */
+
+ /* At this point, all threads are stopped (happens automatically
+ in either the OS or the native code). Therefore we need to
+ continue all threads in order to make progress. */
+
target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
prepare_to_wait (ecs);
return;
@@ -2130,6 +2180,9 @@ handle_inferior_event (struct execution_
if (!ptid_equal (deferred_step_ptid, null_ptid))
{
+ /* In non-stop mode, there's never a deferred_step_ptid set. */
+ gdb_assert (!non_stop);
+
/* If we stopped for some other reason than single-stepping, ignore
the fact that we were supposed to switch back. */
if (stop_signal == TARGET_SIGNAL_TRAP)
@@ -2278,8 +2331,13 @@ handle_inferior_event (struct execution_
if (!ptid_equal (inferior_ptid, ecs->ptid))
context_switch (ecs->ptid);
- waiton_ptid = ecs->ptid;
- infwait_state = infwait_thread_hop_state;
+ if (!non_stop)
+ {
+ /* Only need to require the next event from this
+ thread in all-stop mode. */
+ waiton_ptid = ecs->ptid;
+ infwait_state = infwait_thread_hop_state;
+ }
tss->stepping_over_breakpoint = 1;
keep_going (ecs);
@@ -3834,7 +3892,16 @@ done:
/* Delete the breakpoint we stopped at, if it wants to be deleted.
Delete any breakpoint that is to be deleted at the next stop. */
breakpoint_auto_delete (stop_bpstat);
- set_running (pid_to_ptid (-1), 0);
+
+ if (target_has_execution
+ && last.kind != TARGET_WAITKIND_SIGNALLED
+ && last.kind != TARGET_WAITKIND_EXITED)
+ {
+ if (!non_stop)
+ set_running (pid_to_ptid (-1), 0);
+ else
+ set_running (inferior_ptid, 0);
+ }
}
static int
Index: src/gdb/thread.c
===================================================================
--- src.orig/gdb/thread.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/thread.c 2008-07-01 23:03:37.000000000 +0100
@@ -42,6 +42,8 @@
#include "observer.h"
#include "annotate.h"
+#include "cli/cli-decode.h"
+
/* Definition of struct thread_info exported to gdbthread.h */
/* Prototypes for exported functions. */
@@ -625,9 +627,12 @@ print_thread_info (struct ui_out *uiout,
int current_thread = -1;
/* Backup current thread and selected frame. */
- saved_frame_id = get_frame_id (get_selected_frame (NULL));
- old_chain = make_cleanup_restore_current_thread (inferior_ptid, saved_frame_id);
+ if (!is_running (inferior_ptid))
+ saved_frame_id = get_frame_id (get_selected_frame (NULL));
+ else
+ saved_frame_id = null_frame_id;
+ old_chain = make_cleanup_restore_current_thread (inferior_ptid, saved_frame_id);
make_cleanup_ui_out_list_begin_end (uiout, "threads");
prune_threads ();
@@ -662,12 +667,18 @@ print_thread_info (struct ui_out *uiout,
ui_out_text (uiout, ")");
}
ui_out_text (uiout, " ");
- /* That switch put us at the top of the stack (leaf frame). */
- switch_to_thread (tp->ptid);
- print_stack_frame (get_selected_frame (NULL),
- /* For MI output, print frame level. */
- ui_out_is_mi_like_p (uiout),
- LOCATION);
+ if (tp->running_)
+ ui_out_text (uiout, "(running)\n");
+ else
+ {
+ /* The switch below puts us at the top of the stack (leaf
+ frame). */
+ switch_to_thread (tp->ptid);
+ print_stack_frame (get_selected_frame (NULL),
+ /* For MI output, print frame level. */
+ ui_out_is_mi_like_p (uiout),
+ LOCATION);
+ }
do_cleanups (chain2);
}
@@ -683,6 +694,9 @@ print_thread_info (struct ui_out *uiout,
ui_out_field_int (uiout, "current-thread-id", current_thread);
}
+ if (is_running (inferior_ptid))
+ return;
+
/* If case we were not able to find the original frame, print the
new selected frame. */
if (frame_find_by_id (saved_frame_id) == NULL)
@@ -721,7 +735,11 @@ switch_to_thread (ptid_t ptid)
inferior_ptid = ptid;
reinit_frame_cache ();
registers_changed ();
- stop_pc = read_pc ();
+
+ if (!is_executing (ptid))
+ stop_pc = read_pc ();
+ else
+ stop_pc = ~(CORE_ADDR) 0;
}
static void
@@ -758,7 +776,12 @@ do_restore_current_thread_cleanup (void
{
struct current_thread_cleanup *old = arg;
restore_current_thread (old->inferior_ptid);
- restore_selected_frame (old->selected_frame_id);
+
+ /* A command like 'thread apply all $exec_command&' may change the
+ running state of the originally selected thread, so we have to
+ recheck it here. */
+ if (!is_running (old->inferior_ptid))
+ restore_selected_frame (old->selected_frame_id);
xfree (old);
}
@@ -786,8 +809,7 @@ static void
thread_apply_all_command (char *cmd, int from_tty)
{
struct thread_info *tp;
- struct cleanup *old_chain;
- struct cleanup *saved_cmd_cleanup_chain;
+ struct cleanup *old_chain = make_cleanup (null_cleanup, 0);
char *saved_cmd;
struct frame_id saved_frame_id;
ptid_t current_ptid;
@@ -797,8 +819,12 @@ thread_apply_all_command (char *cmd, int
error (_("Please specify a command following the thread ID list"));
current_ptid = inferior_ptid;
- saved_frame_id = get_frame_id (get_selected_frame (NULL));
- old_chain = make_cleanup_restore_current_thread (inferior_ptid, saved_frame_id);
+
+ if (!is_running (inferior_ptid))
+ saved_frame_id = get_frame_id (get_selected_frame (NULL));
+ else
+ saved_frame_id = null_frame_id;
+ make_cleanup_restore_current_thread (inferior_ptid, saved_frame_id);
/* It is safe to update the thread list now, before
traversing it for "thread apply all". MVS */
@@ -807,11 +833,15 @@ thread_apply_all_command (char *cmd, int
/* Save a copy of the command in case it is clobbered by
execute_command */
saved_cmd = xstrdup (cmd);
- saved_cmd_cleanup_chain = make_cleanup (xfree, (void *) saved_cmd);
+ make_cleanup (xfree, saved_cmd);
for (tp = thread_list; tp; tp = tp->next)
if (thread_alive (tp))
{
- switch_to_thread (tp->ptid);
+ if (non_stop)
+ context_switch_to (tp->ptid);
+ else
+ switch_to_thread (tp->ptid);
+
printf_filtered (_("\nThread %d (%s):\n"),
tp->num, target_tid_to_str (inferior_ptid));
execute_command (cmd, from_tty);
@@ -821,12 +851,10 @@ thread_apply_all_command (char *cmd, int
if (!ptid_equal (current_ptid, inferior_ptid))
thread_has_changed = 1;
- do_cleanups (saved_cmd_cleanup_chain);
do_cleanups (old_chain);
/* Print stack frame only if we changed thread. */
- if (thread_has_changed)
+ if (thread_has_changed && !is_running (inferior_ptid))
print_stack_frame (get_current_frame (), 1, SRC_LINE);
-
}
static void
@@ -850,7 +878,11 @@ thread_apply_command (char *tidlist, int
error (_("Please specify a command following the thread ID list"));
current_ptid = inferior_ptid;
- saved_frame_id = get_frame_id (get_selected_frame (NULL));
+
+ if (!is_running (inferior_ptid))
+ saved_frame_id = get_frame_id (get_selected_frame (NULL));
+ else
+ saved_frame_id = null_frame_id;
old_chain = make_cleanup_restore_current_thread (inferior_ptid, saved_frame_id);
/* Save a copy of the command in case it is clobbered by
@@ -894,7 +926,10 @@ thread_apply_command (char *tidlist, int
warning (_("Thread %d has terminated."), start);
else
{
- switch_to_thread (tp->ptid);
+ if (non_stop)
+ context_switch_to (tp->ptid);
+ else
+ switch_to_thread (tp->ptid);
printf_filtered (_("\nThread %d (%s):\n"), tp->num,
target_tid_to_str (inferior_ptid));
execute_command (cmd, from_tty);
@@ -962,7 +997,10 @@ do_captured_thread_select (struct ui_out
if (!thread_alive (tp))
error (_("Thread ID %d has terminated."), num);
- switch_to_thread (tp->ptid);
+ if (non_stop)
+ context_switch_to (tp->ptid);
+ else
+ switch_to_thread (tp->ptid);
ui_out_text (uiout, "[Switching to thread ");
ui_out_field_int (uiout, "new-thread-id", pid_to_thread_id (inferior_ptid));
@@ -970,7 +1008,11 @@ do_captured_thread_select (struct ui_out
ui_out_text (uiout, target_tid_to_str (inferior_ptid));
ui_out_text (uiout, ")]");
- print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
+ if (!tp->running_)
+ print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
+ else
+ ui_out_text (uiout, "(running)\n");
+
return GDB_RC_OK;
}
@@ -990,14 +1032,17 @@ void
_initialize_thread (void)
{
static struct cmd_list_element *thread_apply_list = NULL;
+ struct cmd_list_element *c;
- add_info ("threads", info_threads_command,
- _("IDs of currently known threads."));
+ c = add_info ("threads", info_threads_command,
+ _("IDs of currently known threads."));
+ set_cmd_async_ok (c);
- add_prefix_cmd ("thread", class_run, thread_command, _("\
+ c = add_prefix_cmd ("thread", class_run, thread_command, _("\
Use this command to switch between threads.\n\
The new thread ID must be currently known."),
- &thread_cmd_list, "thread ", 1, &cmdlist);
+ &thread_cmd_list, "thread ", 1, &cmdlist);
+ set_cmd_async_ok (c);
add_prefix_cmd ("apply", class_run, thread_apply_command,
_("Apply a command to a list of threads."),
Index: src/gdb/inf-loop.c
===================================================================
--- src.orig/gdb/inf-loop.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/inf-loop.c 2008-07-01 23:03:37.000000000 +0100
@@ -73,11 +73,15 @@ inferior_event_handler (enum inferior_ev
break;
case INF_EXEC_COMPLETE:
- /* Unregister the inferior from the event loop. This is done so that
- when the inferior is not running we don't get distracted by
- spurious inferior output. */
- if (target_has_execution)
- target_async (NULL, 0);
+
+ if (!non_stop)
+ {
+ /* Unregister the inferior from the event loop. This is done
+ so that when the inferior is not running we don't get
+ distracted by spurious inferior output. */
+ if (target_has_execution)
+ target_async (NULL, 0);
+ }
/* The call to async_enable_stdin below resets 'sync_execution'.
However, if sync_execution is 1 now, we also need to show the
Index: src/gdb/infcmd.c
===================================================================
--- src.orig/gdb/infcmd.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/infcmd.c 2008-07-01 23:03:37.000000000 +0100
@@ -613,6 +613,7 @@ continue_command (char *proc_count_exp,
{
int async_exec = 0;
ERROR_NO_INFERIOR;
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (proc_count_exp != NULL)
@@ -714,6 +715,7 @@ step_1 (int skip_subroutines, int single
int thread = -1;
ERROR_NO_INFERIOR;
+ ensure_not_running ();
if (count_string)
async_exec = strip_bg_char (&count_string);
@@ -936,6 +938,7 @@ jump_command (char *arg, int from_tty)
int async_exec = 0;
ERROR_NO_INFERIOR;
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (arg != NULL)
@@ -1036,6 +1039,7 @@ signal_command (char *signum_exp, int fr
dont_repeat (); /* Too dangerous. */
ERROR_NO_INFERIOR;
+ ensure_not_running ();
/* Find out whether we must run in the background. */
if (signum_exp != NULL)
@@ -2100,7 +2104,8 @@ interrupt_target_command (char *args, in
if (target_can_async_p ())
{
dont_repeat (); /* Not for the faint of heart */
- target_stop ();
+
+ target_stop (inferior_ptid);
}
}
Index: src/gdb/inferior.h
===================================================================
--- src.orig/gdb/inferior.h 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/inferior.h 2008-07-01 23:03:37.000000000 +0100
@@ -245,6 +245,12 @@ extern void get_last_target_status(ptid_
extern void follow_inferior_reset_breakpoints (void);
+/* Throw an error indicating the current thread is running. */
+extern void error_is_running (void);
+
+/* Calls error_is_running if the current thread is running. */
+extern void ensure_not_running (void);
+
/* From infcmd.c */
extern void tty_command (char *, int);
Index: src/gdb/target.h
===================================================================
--- src.orig/gdb/target.h 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/target.h 2008-07-01 23:03:37.000000000 +0100
@@ -401,7 +401,7 @@ struct target_ops
void (*to_find_new_threads) (void);
char *(*to_pid_to_str) (ptid_t);
char *(*to_extra_thread_info) (struct thread_info *);
- void (*to_stop) (void);
+ void (*to_stop) (ptid_t);
void (*to_rcmd) (char *command, struct ui_file *output);
char *(*to_pid_to_exec_file) (int pid);
void (*to_log_command) (const char *);
@@ -898,7 +898,7 @@ int target_follow_fork (int follow_child
Unix, this should act like SIGSTOP). This function is normally
used by GUIs to implement a stop button. */
-#define target_stop current_target.to_stop
+#define target_stop(ptid) (*current_target.to_stop) (ptid)
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
Index: src/gdb/target.c
===================================================================
--- src.orig/gdb/target.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/target.c 2008-07-01 23:03:37.000000000 +0100
@@ -165,7 +165,7 @@ static void debug_to_notice_signals (pti
static int debug_to_thread_alive (ptid_t);
-static void debug_to_stop (void);
+static void debug_to_stop (ptid_t);
/* NOTE: cagney/2004-09-29: Many targets reference this variable in
wierd and mysterious ways. Putting the variable here lets those
@@ -629,7 +629,7 @@ update_current_target (void)
(char *(*) (struct thread_info *))
return_zero);
de_fault (to_stop,
- (void (*) (void))
+ (void (*) (ptid_t))
target_ignore);
current_target.to_xfer_partial = current_xfer_partial;
de_fault (to_rcmd,
@@ -2996,11 +2996,12 @@ debug_to_find_new_threads (void)
}
static void
-debug_to_stop (void)
+debug_to_stop (ptid_t ptid)
{
- debug_target.to_stop ();
+ debug_target.to_stop (ptid);
- fprintf_unfiltered (gdb_stdlog, "target_stop ()\n");
+ fprintf_unfiltered (gdb_stdlog, "target_stop (%s)\n",
+ target_pid_to_str (ptid));
}
static void
Index: src/gdb/Makefile.in
===================================================================
--- src.orig/gdb/Makefile.in 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/Makefile.in 2008-07-01 23:03:37.000000000 +0100
@@ -2921,7 +2921,7 @@ target-memory.o: target-memory.c $(defs_
thread.o: thread.c $(defs_h) $(symtab_h) $(frame_h) $(inferior_h) \
$(environ_h) $(value_h) $(target_h) $(gdbthread_h) $(exceptions_h) \
$(command_h) $(gdbcmd_h) $(regcache_h) $(gdb_h) $(gdb_string_h) \
- $(ui_out_h) $(observer_h) $(annotate_h)
+ $(ui_out_h) $(observer_h) $(annotate_h) $(cli_decode_h)
top.o: top.c $(defs_h) $(gdbcmd_h) $(call_cmds_h) $(cli_cmds_h) \
$(cli_script_h) $(cli_setshow_h) $(cli_decode_h) $(symtab_h) \
$(inferior_h) $(exceptions_h) $(target_h) $(breakpoint_h) \
Index: src/gdb/inf-ptrace.c
===================================================================
--- src.orig/gdb/inf-ptrace.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/inf-ptrace.c 2008-07-01 23:03:37.000000000 +0100
@@ -297,7 +297,7 @@ inf_ptrace_kill (void)
/* Stop the inferior. */
static void
-inf_ptrace_stop (void)
+inf_ptrace_stop (ptid_t ptid)
{
/* Send a SIGINT to the process group. This acts just like the user
typed a ^C on the controlling terminal. Note that using a
Index: src/gdb/remote.c
===================================================================
--- src.orig/gdb/remote.c 2008-07-01 23:03:30.000000000 +0100
+++ src/gdb/remote.c 2008-07-01 23:03:37.000000000 +0100
@@ -155,7 +155,7 @@ static void init_remote_ops (void);
static void init_extended_remote_ops (void);
-static void remote_stop (void);
+static void remote_stop (ptid_t);
static int ishex (int ch, int *val);
@@ -3269,7 +3269,7 @@ async_remote_interrupt (gdb_client_data
if (remote_debug)
fprintf_unfiltered (gdb_stdlog, "remote_interrupt called\n");
- target_stop ();
+ target_stop (inferior_ptid);
}
/* Perform interrupt, if the first attempt did not succeed. Just give
@@ -3323,7 +3323,7 @@ remote_interrupt_twice (int signo)
interrupt is requested, either by the command line or the GUI, we
will eventually end up here. */
static void
-remote_stop (void)
+remote_stop (ptid_t ptid)
{
/* Send a break or a ^C, depending on user preference. */
if (remote_debug)