This is the mail archive of the gdb-patches@sources.redhat.com mailing list for the GDB project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

[commit/PA] Delete -Wunused-function et.al.


Hello,

This deletes "one or two" unused functions and macros from the PA code. One minor bit of fall-out - some #ifdef code in infrun.c also gets to be deleted.

committed to mainline,
Andrew
2004-03-07  Andrew Cagney  <cagney@redhat.com>

	* infcall.c (legacy_push_dummy_code): Delete #ifdef
	GDB_TARGET_IS_HPPA code.
	* config/pa/tm-hppa.h (DEPRECATED_FIX_CALL_DUMMY)
	(hppa_fix_call_dummy, DEPRECATED_CALL_DUMMY_HAS_COMPLETED) 
	(DEPRECATED_DUMMY_WRITE_SP, CALL_DUMMY): Delete.
	* config/pa/tm-hppa64.h (CALL_DUMMY): Delete.
	* hppa-tdep.c (hppa_frame_chain, hppa_frame_chain_valid) 
	(hppa_push_dummy_frame, hppa_pop_frame, hppa_push_arguments) 
	(hppa_fix_call_dummy, hppa64_stack_align, hppa_frame_saved_pc) 
	(hppa_init_extra_frame_info, hppa_saved_pc_after_call)
	(hppa64_call_dummy_breakpoint_offset, hppa_frame_init_saved_regs) 
	(hppa_frameless_function_invocation, hppa64_store_return_value) 
	(hppa_store_struct_return, hppa64_extract_return_value) 
	(hppa64_use_struct_convention, hppa_frame_find_saved_regs)
	(hppa32_call_dummy_length, hppa64_call_dummy_length) 
	(find_dummy_frame_regs, FUNC_LDIL_OFFSET, FUNC_LDO_OFFSET)
	(find_proc_framesize, deposit_21, restore_pc_queue) 
	(find_return_regnum, pc_in_interrupt_handler, deposit_14) 
	(rp_saved, pc_in_linker_stub): 

Index: hppa-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/hppa-tdep.c,v
retrieving revision 1.132
diff -u -r1.132 hppa-tdep.c
--- hppa-tdep.c	7 Mar 2004 17:19:26 -0000	1.132
+++ hppa-tdep.c	7 Mar 2004 18:04:56 -0000
@@ -76,26 +76,12 @@
 static const int hppa32_num_regs = 128;
 static const int hppa64_num_regs = 96;
 
-static const int hppa64_call_dummy_breakpoint_offset = 22 * 4;
-
-/* DEPRECATED_CALL_DUMMY_LENGTH is computed based on the size of a
-   word on the target machine, not the size of an instruction.  Since
-   a word on this target holds two instructions we have to divide the
-   instruction size by two to get the word size of the dummy.  */
-static const int hppa32_call_dummy_length = INSTRUCTION_SIZE * 28;
-static const int hppa64_call_dummy_length = INSTRUCTION_SIZE * 26 / 2;
-
 /* Get at various relevent fields of an instruction word. */
 #define MASK_5 0x1f
 #define MASK_11 0x7ff
 #define MASK_14 0x3fff
 #define MASK_21 0x1fffff
 
-/* Define offsets into the call dummy for the target function address.
-   See comments related to CALL_DUMMY for more info.  */
-#define FUNC_LDIL_OFFSET (INSTRUCTION_SIZE * 9)
-#define FUNC_LDO_OFFSET (INSTRUCTION_SIZE * 10)
-
 /* Define offsets into the call dummy for the _sr4export address.
    See comments related to CALL_DUMMY for more info.  */
 #define SR4EXPORT_LDIL_OFFSET (INSTRUCTION_SIZE * 12)
@@ -118,24 +104,12 @@
 
 static unsigned extract_5r_store (unsigned int);
 
-static void hppa_frame_init_saved_regs (struct frame_info *frame);
-
-static void find_dummy_frame_regs (struct frame_info *, CORE_ADDR *);
-
-static int find_proc_framesize (CORE_ADDR);
-
-static int find_return_regnum (CORE_ADDR);
-
 struct unwind_table_entry *find_unwind_entry (CORE_ADDR);
 
 static int extract_17 (unsigned int);
 
-static unsigned deposit_21 (unsigned int, unsigned int);
-
 static int extract_21 (unsigned);
 
-static unsigned deposit_14 (int, unsigned int);
-
 static int extract_14 (unsigned);
 
 static void unwind_command (char *, int);
@@ -144,8 +118,6 @@
 
 static int sign_extend (unsigned int, unsigned int);
 
-static int restore_pc_queue (CORE_ADDR *);
-
 static int hppa_alignof (struct type *);
 
 static int prologue_inst_adjust_sp (unsigned long);
@@ -156,10 +128,6 @@
 
 static int inst_saves_fr (unsigned long);
 
-static int pc_in_interrupt_handler (CORE_ADDR);
-
-static int pc_in_linker_stub (CORE_ADDR);
-
 static int compare_unwind_entries (const void *, const void *);
 
 static void read_unwind_info (struct objfile *);
@@ -181,35 +149,14 @@
 CORE_ADDR hppa_skip_trampoline_code (CORE_ADDR pc);
 int hppa_in_solib_call_trampoline (CORE_ADDR pc, char *name);
 int hppa_in_solib_return_trampoline (CORE_ADDR pc, char *name);
-CORE_ADDR hppa_saved_pc_after_call (struct frame_info *frame);
 int hppa_inner_than (CORE_ADDR lhs, CORE_ADDR rhs);
-CORE_ADDR hppa64_stack_align (CORE_ADDR sp);
 int hppa_pc_requires_run_before_use (CORE_ADDR pc);
 int hppa_instruction_nullified (void);
 int hppa_register_raw_size (int reg_nr);
 int hppa_register_byte (int reg_nr);
 struct type * hppa32_register_virtual_type (int reg_nr);
 struct type * hppa64_register_virtual_type (int reg_nr);
-void hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp);
-void hppa64_extract_return_value (struct type *type, char *regbuf,
-                                  char *valbuf);
-int hppa64_use_struct_convention (int gcc_p, struct type *type);
-void hppa64_store_return_value (struct type *type, char *valbuf);
 int hppa_cannot_store_register (int regnum);
-void hppa_init_extra_frame_info (int fromleaf, struct frame_info *frame);
-CORE_ADDR hppa_frame_chain (struct frame_info *frame);
-int hppa_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe);
-int hppa_frameless_function_invocation (struct frame_info *frame);
-CORE_ADDR hppa_frame_saved_pc (struct frame_info *frame);
-CORE_ADDR hppa_frame_args_address (struct frame_info *fi);
-int hppa_frame_num_args (struct frame_info *frame);
-void hppa_push_dummy_frame (void);
-void hppa_pop_frame (void);
-CORE_ADDR hppa_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun,
-                               int nargs, struct value **args,
-                               struct type *type, int gcc_p);
-CORE_ADDR hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
-		               int struct_return, CORE_ADDR struct_addr);
 CORE_ADDR hppa_smash_text_address (CORE_ADDR addr);
 CORE_ADDR hppa_target_read_pc (ptid_t ptid);
 void hppa_target_write_pc (CORE_ADDR v, ptid_t ptid);
@@ -233,15 +180,6 @@
 /* In breakpoint.c */
 extern int exception_catchpoints_are_fragile;
 
-/* Should call_function allocate stack space for a struct return?  */
-
-int
-hppa64_use_struct_convention (int gcc_p, struct type *type)
-{
-  /* RM: struct upto 128 bits are returned in registers */
-  return TYPE_LENGTH (type) > 16;
-}
-
 /* Handle 32/64-bit struct return conventions.  */
 
 static enum return_value_convention
@@ -409,16 +347,6 @@
   return low_sign_extend (word & MASK_14, 14);
 }
 
-/* deposit a 14 bit constant in a word */
-
-static unsigned
-deposit_14 (int opnd, unsigned word)
-{
-  unsigned sign = (opnd < 0 ? 1 : 0);
-
-  return word | ((unsigned) opnd << 1 & MASK_14) | sign;
-}
-
 /* extract a 21 bit constant */
 
 static int
@@ -440,27 +368,6 @@
   return sign_extend (val, 21) << 11;
 }
 
-/* deposit a 21 bit constant in a word. Although 21 bit constants are
-   usually the top 21 bits of a 32 bit constant, we assume that only
-   the low 21 bits of opnd are relevant */
-
-static unsigned
-deposit_21 (unsigned opnd, unsigned word)
-{
-  unsigned val = 0;
-
-  val |= get_field (opnd, 11 + 14, 11 + 18);
-  val <<= 2;
-  val |= get_field (opnd, 11 + 12, 11 + 13);
-  val <<= 2;
-  val |= get_field (opnd, 11 + 19, 11 + 20);
-  val <<= 11;
-  val |= get_field (opnd, 11 + 1, 11 + 11);
-  val <<= 1;
-  val |= get_field (opnd, 11 + 0, 11 + 0);
-  return word | val;
-}
-
 /* extract a 17 bit constant from branch instructions, returning the
    19 bit signed value. */
 
@@ -871,1294 +778,38 @@
     "fpsr",    "fpe1",   "fpe2",   "fpe3",
     "fr4",    "fr5",     "fr6",    "fr7",
     "fr8",     "fr9",    "fr10",   "fr11",
-    "fr12",   "fr13",    "fr14",   "fr15",
-    "fr16",    "fr17",   "fr18",   "fr19",
-    "fr20",   "fr21",    "fr22",   "fr23",
-    "fr24",    "fr25",   "fr26",   "fr27",
-    "fr28",  "fr29",    "fr30",   "fr31"
-  };
-  if (i < 0 || i >= (sizeof (names) / sizeof (*names)))
-    return NULL;
-  else
-    return names[i];
-}
-
-
-
-/* Return the adjustment necessary to make for addresses on the stack
-   as presented by hpread.c.
-
-   This is necessary because of the stack direction on the PA and the
-   bizarre way in which someone (?) decided they wanted to handle
-   frame pointerless code in GDB.  */
-int
-hpread_adjust_stack_address (CORE_ADDR func_addr)
-{
-  struct unwind_table_entry *u;
-
-  u = find_unwind_entry (func_addr);
-  if (!u)
-    return 0;
-  else
-    return u->Total_frame_size << 3;
-}
-
-/* Called to determine if PC is in an interrupt handler of some
-   kind.  */
-
-static int
-pc_in_interrupt_handler (CORE_ADDR pc)
-{
-  struct unwind_table_entry *u;
-  struct minimal_symbol *msym_us;
-
-  u = find_unwind_entry (pc);
-  if (!u)
-    return 0;
-
-  /* Oh joys.  HPUX sets the interrupt bit for _sigreturn even though
-     its frame isn't a pure interrupt frame.  Deal with this.  */
-  msym_us = lookup_minimal_symbol_by_pc (pc);
-
-  return (u->HP_UX_interrupt_marker
-	  && !PC_IN_SIGTRAMP (pc, DEPRECATED_SYMBOL_NAME (msym_us)));
-}
-
-/* Called when no unwind descriptor was found for PC.  Returns 1 if it
-   appears that PC is in a linker stub.
-
-   ?!? Need to handle stubs which appear in PA64 code.  */
-
-static int
-pc_in_linker_stub (CORE_ADDR pc)
-{
-  int found_magic_instruction = 0;
-  int i;
-  char buf[4];
-
-  /* If unable to read memory, assume pc is not in a linker stub.  */
-  if (target_read_memory (pc, buf, 4) != 0)
-    return 0;
-
-  /* We are looking for something like
-
-     ; $$dyncall jams RP into this special spot in the frame (RP')
-     ; before calling the "call stub"
-     ldw     -18(sp),rp
-
-     ldsid   (rp),r1         ; Get space associated with RP into r1
-     mtsp    r1,sp           ; Move it into space register 0
-     be,n    0(sr0),rp)      ; back to your regularly scheduled program */
-
-  /* Maximum known linker stub size is 4 instructions.  Search forward
-     from the given PC, then backward.  */
-  for (i = 0; i < 4; i++)
-    {
-      /* If we hit something with an unwind, stop searching this direction.  */
-
-      if (find_unwind_entry (pc + i * 4) != 0)
-	break;
-
-      /* Check for ldsid (rp),r1 which is the magic instruction for a 
-         return from a cross-space function call.  */
-      if (read_memory_integer (pc + i * 4, 4) == 0x004010a1)
-	{
-	  found_magic_instruction = 1;
-	  break;
-	}
-      /* Add code to handle long call/branch and argument relocation stubs
-         here.  */
-    }
-
-  if (found_magic_instruction != 0)
-    return 1;
-
-  /* Now look backward.  */
-  for (i = 0; i < 4; i++)
-    {
-      /* If we hit something with an unwind, stop searching this direction.  */
-
-      if (find_unwind_entry (pc - i * 4) != 0)
-	break;
-
-      /* Check for ldsid (rp),r1 which is the magic instruction for a 
-         return from a cross-space function call.  */
-      if (read_memory_integer (pc - i * 4, 4) == 0x004010a1)
-	{
-	  found_magic_instruction = 1;
-	  break;
-	}
-      /* Add code to handle long call/branch and argument relocation stubs
-         here.  */
-    }
-  return found_magic_instruction;
-}
-
-static int
-find_return_regnum (CORE_ADDR pc)
-{
-  struct unwind_table_entry *u;
-
-  u = find_unwind_entry (pc);
-
-  if (!u)
-    return RP_REGNUM;
-
-  if (u->Millicode)
-    return 31;
-
-  return RP_REGNUM;
-}
-
-/* Return size of frame, or -1 if we should use a frame pointer.  */
-static int
-find_proc_framesize (CORE_ADDR pc)
-{
-  struct unwind_table_entry *u;
-  struct minimal_symbol *msym_us;
-
-  /* This may indicate a bug in our callers... */
-  if (pc == (CORE_ADDR) 0)
-    return -1;
-
-  u = find_unwind_entry (pc);
-
-  if (!u)
-    {
-      if (pc_in_linker_stub (pc))
-	/* Linker stubs have a zero size frame.  */
-	return 0;
-      else
-	return -1;
-    }
-
-  msym_us = lookup_minimal_symbol_by_pc (pc);
-
-  /* If Save_SP is set, and we're not in an interrupt or signal caller,
-     then we have a frame pointer.  Use it.  */
-  if (u->Save_SP
-      && !pc_in_interrupt_handler (pc)
-      && msym_us
-      && !PC_IN_SIGTRAMP (pc, DEPRECATED_SYMBOL_NAME (msym_us)))
-    return -1;
-
-  return u->Total_frame_size << 3;
-}
-
-/* Return offset from sp at which rp is saved, or 0 if not saved.  */
-static int rp_saved (CORE_ADDR);
-
-static int
-rp_saved (CORE_ADDR pc)
-{
-  struct unwind_table_entry *u;
-
-  /* A function at, and thus a return PC from, address 0?  Not in HP-UX! */
-  if (pc == (CORE_ADDR) 0)
-    return 0;
-
-  u = find_unwind_entry (pc);
-
-  if (!u)
-    {
-      if (pc_in_linker_stub (pc))
-	/* This is the so-called RP'.  */
-	return -24;
-      else
-	return 0;
-    }
-
-  if (u->Save_RP)
-    return (TARGET_PTR_BIT == 64 ? -16 : -20);
-  else if (u->stub_unwind.stub_type != 0)
-    {
-      switch (u->stub_unwind.stub_type)
-	{
-	case EXPORT:
-	case IMPORT:
-	  return -24;
-	case PARAMETER_RELOCATION:
-	  return -8;
-	default:
-	  return 0;
-	}
-    }
-  else
-    return 0;
-}
-
-int
-hppa_frameless_function_invocation (struct frame_info *frame)
-{
-  struct unwind_table_entry *u;
-
-  u = find_unwind_entry (get_frame_pc (frame));
-
-  if (u == 0)
-    return 0;
-
-  return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0);
-}
-
-/* Immediately after a function call, return the saved pc.
-   Can't go through the frames for this because on some machines
-   the new frame is not set up until the new function executes
-   some instructions.  */
-
-CORE_ADDR
-hppa_saved_pc_after_call (struct frame_info *frame)
-{
-  int ret_regnum;
-  CORE_ADDR pc;
-  struct unwind_table_entry *u;
-
-  ret_regnum = find_return_regnum (get_frame_pc (frame));
-  pc = read_register (ret_regnum) & ~0x3;
-
-  /* If PC is in a linker stub, then we need to dig the address
-     the stub will return to out of the stack.  */
-  u = find_unwind_entry (pc);
-  if (u && u->stub_unwind.stub_type != 0)
-    return DEPRECATED_FRAME_SAVED_PC (frame);
-  else
-    return pc;
-}
-
-CORE_ADDR
-hppa_frame_saved_pc (struct frame_info *frame)
-{
-  CORE_ADDR pc = get_frame_pc (frame);
-  struct unwind_table_entry *u;
-  CORE_ADDR old_pc = 0;
-  int spun_around_loop = 0;
-  int rp_offset = 0;
-
-  /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner
-     at the base of the frame in an interrupt handler.  Registers within
-     are saved in the exact same order as GDB numbers registers.  How
-     convienent.  */
-  if (pc_in_interrupt_handler (pc))
-    return read_memory_integer (get_frame_base (frame) + PCOQ_HEAD_REGNUM * 4,
-				TARGET_PTR_BIT / 8) & ~0x3;
-
-  if ((get_frame_pc (frame) >= get_frame_base (frame)
-       && (get_frame_pc (frame)
-	   <= (get_frame_base (frame)
-	       /* A call dummy is sized in words, but it is actually a
-		  series of instructions.  Account for that scaling
-		  factor.  */
-	       + ((DEPRECATED_REGISTER_SIZE / INSTRUCTION_SIZE)
-		  * DEPRECATED_CALL_DUMMY_LENGTH)
-	       /* Similarly we have to account for 64bit wide register
-		  saves.  */
-	       + (32 * DEPRECATED_REGISTER_SIZE)
-	       /* We always consider FP regs 8 bytes long.  */
-	       + (NUM_REGS - FP0_REGNUM) * 8
-	       /* Similarly we have to account for 64bit wide register
-		  saves.  */
-	       + (6 * DEPRECATED_REGISTER_SIZE)))))
-    {
-      return read_memory_integer ((get_frame_base (frame)
-				   + (TARGET_PTR_BIT == 64 ? -16 : -20)),
-				  TARGET_PTR_BIT / 8) & ~0x3;
-    }
-
-#ifdef FRAME_SAVED_PC_IN_SIGTRAMP
-  /* Deal with signal handler caller frames too.  */
-  if ((get_frame_type (frame) == SIGTRAMP_FRAME))
-    {
-      CORE_ADDR rp;
-      FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp);
-      return rp & ~0x3;
-    }
-#endif
-
-  if (hppa_frameless_function_invocation (frame))
-    {
-      int ret_regnum;
-
-      ret_regnum = find_return_regnum (pc);
-
-      /* If the next frame is an interrupt frame or a signal
-         handler caller, then we need to look in the saved
-         register area to get the return pointer (the values
-         in the registers may not correspond to anything useful).  */
-      if (get_next_frame (frame)
-	  && ((get_frame_type (get_next_frame (frame)) == SIGTRAMP_FRAME)
-	      || pc_in_interrupt_handler (get_frame_pc (get_next_frame (frame)))))
-	{
-	  CORE_ADDR *saved_regs;
-	  hppa_frame_init_saved_regs (get_next_frame (frame));
-	  saved_regs = deprecated_get_frame_saved_regs (get_next_frame (frame));
-	  if (read_memory_integer (saved_regs[FLAGS_REGNUM],
-				   TARGET_PTR_BIT / 8) & 0x2)
-	    {
-	      pc = read_memory_integer (saved_regs[31],
-					TARGET_PTR_BIT / 8) & ~0x3;
-
-	      /* Syscalls are really two frames.  The syscall stub itself
-	         with a return pointer in %rp and the kernel call with
-	         a return pointer in %r31.  We return the %rp variant
-	         if %r31 is the same as frame->pc.  */
-	      if (pc == get_frame_pc (frame))
-		pc = read_memory_integer (saved_regs[RP_REGNUM],
-					  TARGET_PTR_BIT / 8) & ~0x3;
-	    }
-	  else
-	    pc = read_memory_integer (saved_regs[RP_REGNUM],
-				      TARGET_PTR_BIT / 8) & ~0x3;
-	}
-      else
-	pc = read_register (ret_regnum) & ~0x3;
-    }
-  else
-    {
-      spun_around_loop = 0;
-      old_pc = pc;
-
-    restart:
-      rp_offset = rp_saved (pc);
-
-      /* Similar to code in frameless function case.  If the next
-         frame is a signal or interrupt handler, then dig the right
-         information out of the saved register info.  */
-      if (rp_offset == 0
-	  && get_next_frame (frame)
-	  && ((get_frame_type (get_next_frame (frame)) == SIGTRAMP_FRAME)
-	      || pc_in_interrupt_handler (get_frame_pc (get_next_frame (frame)))))
-	{
-	  CORE_ADDR *saved_regs;
-	  hppa_frame_init_saved_regs (get_next_frame (frame));
-	  saved_regs = deprecated_get_frame_saved_regs (get_next_frame (frame));
-	  if (read_memory_integer (saved_regs[FLAGS_REGNUM],
-				   TARGET_PTR_BIT / 8) & 0x2)
-	    {
-	      pc = read_memory_integer (saved_regs[31],
-					TARGET_PTR_BIT / 8) & ~0x3;
-
-	      /* Syscalls are really two frames.  The syscall stub itself
-	         with a return pointer in %rp and the kernel call with
-	         a return pointer in %r31.  We return the %rp variant
-	         if %r31 is the same as frame->pc.  */
-	      if (pc == get_frame_pc (frame))
-		pc = read_memory_integer (saved_regs[RP_REGNUM],
-					  TARGET_PTR_BIT / 8) & ~0x3;
-	    }
-	  else
-	    pc = read_memory_integer (saved_regs[RP_REGNUM],
-				      TARGET_PTR_BIT / 8) & ~0x3;
-	}
-      else if (rp_offset == 0)
-	{
-	  old_pc = pc;
-	  pc = read_register (RP_REGNUM) & ~0x3;
-	}
-      else
-	{
-	  old_pc = pc;
-	  pc = read_memory_integer (get_frame_base (frame) + rp_offset,
-				    TARGET_PTR_BIT / 8) & ~0x3;
-	}
-    }
-
-  /* If PC is inside a linker stub, then dig out the address the stub
-     will return to. 
-
-     Don't do this for long branch stubs.  Why?  For some unknown reason
-     _start is marked as a long branch stub in hpux10.  */
-  u = find_unwind_entry (pc);
-  if (u && u->stub_unwind.stub_type != 0
-      && u->stub_unwind.stub_type != LONG_BRANCH)
-    {
-      unsigned int insn;
-
-      /* If this is a dynamic executable, and we're in a signal handler,
-         then the call chain will eventually point us into the stub for
-         _sigreturn.  Unlike most cases, we'll be pointed to the branch
-         to the real sigreturn rather than the code after the real branch!. 
-
-         Else, try to dig the address the stub will return to in the normal
-         fashion.  */
-      insn = read_memory_integer (pc, 4);
-      if ((insn & 0xfc00e000) == 0xe8000000)
-	return (pc + extract_17 (insn) + 8) & ~0x3;
-      else
-	{
-	  if (old_pc == pc)
-	    spun_around_loop++;
-
-	  if (spun_around_loop > 1)
-	    {
-	      /* We're just about to go around the loop again with
-	         no more hope of success.  Die. */
-	      error ("Unable to find return pc for this frame");
-	    }
-	  else
-	    goto restart;
-	}
-    }
-
-  return pc;
-}
-
-/* We need to correct the PC and the FP for the outermost frame when we are
-   in a system call.  */
-
-void
-hppa_init_extra_frame_info (int fromleaf, struct frame_info *frame)
-{
-  int flags;
-  int framesize;
-
-  if (get_next_frame (frame) && !fromleaf)
-    return;
-
-  /* If the next frame represents a frameless function invocation then
-     we have to do some adjustments that are normally done by
-     DEPRECATED_FRAME_CHAIN.  (DEPRECATED_FRAME_CHAIN is not called in
-     this case.)  */
-  if (fromleaf)
-    {
-      /* Find the framesize of *this* frame without peeking at the PC
-         in the current frame structure (it isn't set yet).  */
-      framesize = find_proc_framesize (DEPRECATED_FRAME_SAVED_PC (get_next_frame (frame)));
-
-      /* Now adjust our base frame accordingly.  If we have a frame pointer
-         use it, else subtract the size of this frame from the current
-         frame.  (we always want frame->frame to point at the lowest address
-         in the frame).  */
-      if (framesize == -1)
-	deprecated_update_frame_base_hack (frame, deprecated_read_fp ());
-      else
-	deprecated_update_frame_base_hack (frame, get_frame_base (frame) - framesize);
-      return;
-    }
-
-  flags = read_register (FLAGS_REGNUM);
-  if (flags & 2)		/* In system call? */
-    deprecated_update_frame_pc_hack (frame, read_register (31) & ~0x3);
-
-  /* The outermost frame is always derived from PC-framesize
-
-     One might think frameless innermost frames should have
-     a frame->frame that is the same as the parent's frame->frame.
-     That is wrong; frame->frame in that case should be the *high*
-     address of the parent's frame.  It's complicated as hell to
-     explain, but the parent *always* creates some stack space for
-     the child.  So the child actually does have a frame of some
-     sorts, and its base is the high address in its parent's frame.  */
-  framesize = find_proc_framesize (get_frame_pc (frame));
-  if (framesize == -1)
-    deprecated_update_frame_base_hack (frame, deprecated_read_fp ());
-  else
-    deprecated_update_frame_base_hack (frame, read_register (SP_REGNUM) - framesize);
-}
-
-/* Given a GDB frame, determine the address of the calling function's
-   frame.  This will be used to create a new GDB frame struct, and
-   then DEPRECATED_INIT_EXTRA_FRAME_INFO and DEPRECATED_INIT_FRAME_PC
-   will be called for the new frame.
-
-   This may involve searching through prologues for several functions
-   at boundaries where GCC calls HP C code, or where code which has
-   a frame pointer calls code without a frame pointer.  */
-
-CORE_ADDR
-hppa_frame_chain (struct frame_info *frame)
-{
-  int my_framesize, caller_framesize;
-  struct unwind_table_entry *u;
-  CORE_ADDR frame_base;
-  struct frame_info *tmp_frame;
-
-  /* A frame in the current frame list, or zero.  */
-  struct frame_info *saved_regs_frame = 0;
-  /* Where the registers were saved in saved_regs_frame.  If
-     saved_regs_frame is zero, this is garbage.  */
-  CORE_ADDR *saved_regs = NULL;
-
-  CORE_ADDR caller_pc;
-
-  struct minimal_symbol *min_frame_symbol;
-  struct symbol *frame_symbol;
-  char *frame_symbol_name;
-
-  /* If this is a threaded application, and we see the
-     routine "__pthread_exit", treat it as the stack root
-     for this thread. */
-  min_frame_symbol = lookup_minimal_symbol_by_pc (get_frame_pc (frame));
-  frame_symbol = find_pc_function (get_frame_pc (frame));
-
-  if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */ )
-    {
-      /* The test above for "no user function name" would defend
-         against the slim likelihood that a user might define a
-         routine named "__pthread_exit" and then try to debug it.
-
-         If it weren't commented out, and you tried to debug the
-         pthread library itself, you'd get errors.
-
-         So for today, we don't make that check. */
-      frame_symbol_name = DEPRECATED_SYMBOL_NAME (min_frame_symbol);
-      if (frame_symbol_name != 0)
-	{
-	  if (0 == strncmp (frame_symbol_name,
-			    THREAD_INITIAL_FRAME_SYMBOL,
-			    THREAD_INITIAL_FRAME_SYM_LEN))
-	    {
-	      /* Pretend we've reached the bottom of the stack. */
-	      return (CORE_ADDR) 0;
-	    }
-	}
-    }				/* End of hacky code for threads. */
-
-  /* Handle HPUX, BSD, and OSF1 style interrupt frames first.  These
-     are easy; at *sp we have a full save state strucutre which we can
-     pull the old stack pointer from.  Also see frame_saved_pc for
-     code to dig a saved PC out of the save state structure.  */
-  if (pc_in_interrupt_handler (get_frame_pc (frame)))
-    frame_base = read_memory_integer (get_frame_base (frame) + SP_REGNUM * 4,
-				      TARGET_PTR_BIT / 8);
-#ifdef FRAME_BASE_BEFORE_SIGTRAMP
-  else if ((get_frame_type (frame) == SIGTRAMP_FRAME))
-    {
-      FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base);
-    }
-#endif
-  else
-    frame_base = get_frame_base (frame);
-
-  /* Get frame sizes for the current frame and the frame of the 
-     caller.  */
-  my_framesize = find_proc_framesize (get_frame_pc (frame));
-  caller_pc = DEPRECATED_FRAME_SAVED_PC (frame);
-
-  /* If we can't determine the caller's PC, then it's not likely we can
-     really determine anything meaningful about its frame.  We'll consider
-     this to be stack bottom. */
-  if (caller_pc == (CORE_ADDR) 0)
-    return (CORE_ADDR) 0;
-
-  caller_framesize = find_proc_framesize (DEPRECATED_FRAME_SAVED_PC (frame));
-
-  /* If caller does not have a frame pointer, then its frame
-     can be found at current_frame - caller_framesize.  */
-  if (caller_framesize != -1)
-    {
-      return frame_base - caller_framesize;
-    }
-  /* Both caller and callee have frame pointers and are GCC compiled
-     (SAVE_SP bit in unwind descriptor is on for both functions.
-     The previous frame pointer is found at the top of the current frame.  */
-  if (caller_framesize == -1 && my_framesize == -1)
-    {
-      return read_memory_integer (frame_base, TARGET_PTR_BIT / 8);
-    }
-  /* Caller has a frame pointer, but callee does not.  This is a little
-     more difficult as GCC and HP C lay out locals and callee register save
-     areas very differently.
-
-     The previous frame pointer could be in a register, or in one of 
-     several areas on the stack.
-
-     Walk from the current frame to the innermost frame examining 
-     unwind descriptors to determine if %r3 ever gets saved into the
-     stack.  If so return whatever value got saved into the stack.
-     If it was never saved in the stack, then the value in %r3 is still
-     valid, so use it. 
-
-     We use information from unwind descriptors to determine if %r3
-     is saved into the stack (Entry_GR field has this information).  */
-
-  for (tmp_frame = frame; tmp_frame; tmp_frame = get_next_frame (tmp_frame))
-    {
-      u = find_unwind_entry (get_frame_pc (tmp_frame));
-
-      if (!u)
-	{
-	  /* We could find this information by examining prologues.  I don't
-	     think anyone has actually written any tools (not even "strip")
-	     which leave them out of an executable, so maybe this is a moot
-	     point.  */
-	  /* ??rehrauer: Actually, it's quite possible to stepi your way into
-	     code that doesn't have unwind entries.  For example, stepping into
-	     the dynamic linker will give you a PC that has none.  Thus, I've
-	     disabled this warning. */
-#if 0
-	  warning ("Unable to find unwind for PC 0x%x -- Help!", get_frame_pc (tmp_frame));
-#endif
-	  return (CORE_ADDR) 0;
-	}
-
-      if (u->Save_SP
-	  || (get_frame_type (tmp_frame) == SIGTRAMP_FRAME)
-	  || pc_in_interrupt_handler (get_frame_pc (tmp_frame)))
-	break;
-
-      /* Entry_GR specifies the number of callee-saved general registers
-         saved in the stack.  It starts at %r3, so %r3 would be 1.  */
-      if (u->Entry_GR >= 1)
-	{
-	  /* The unwind entry claims that r3 is saved here.  However,
-	     in optimized code, GCC often doesn't actually save r3.
-	     We'll discover this if we look at the prologue.  */
-	  hppa_frame_init_saved_regs (tmp_frame);
-	  saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
-	  saved_regs_frame = tmp_frame;
-
-	  /* If we have an address for r3, that's good.  */
-	  if (saved_regs[DEPRECATED_FP_REGNUM])
-	    break;
-	}
-    }
-
-  if (tmp_frame)
-    {
-      /* We may have walked down the chain into a function with a frame
-         pointer.  */
-      if (u->Save_SP
-	  && !(get_frame_type (tmp_frame) == SIGTRAMP_FRAME)
-	  && !pc_in_interrupt_handler (get_frame_pc (tmp_frame)))
-	{
-	  return read_memory_integer (get_frame_base (tmp_frame), TARGET_PTR_BIT / 8);
-	}
-      /* %r3 was saved somewhere in the stack.  Dig it out.  */
-      else
-	{
-	  /* Sick.
-
-	     For optimization purposes many kernels don't have the
-	     callee saved registers into the save_state structure upon
-	     entry into the kernel for a syscall; the optimization
-	     is usually turned off if the process is being traced so
-	     that the debugger can get full register state for the
-	     process.
-
-	     This scheme works well except for two cases:
-
-	     * Attaching to a process when the process is in the
-	     kernel performing a system call (debugger can't get
-	     full register state for the inferior process since
-	     the process wasn't being traced when it entered the
-	     system call).
-
-	     * Register state is not complete if the system call
-	     causes the process to core dump.
-
-
-	     The following heinous code is an attempt to deal with
-	     the lack of register state in a core dump.  It will
-	     fail miserably if the function which performs the
-	     system call has a variable sized stack frame.  */
-
-	  if (tmp_frame != saved_regs_frame)
-	    {
-	      hppa_frame_init_saved_regs (tmp_frame);
-	      saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
-	    }
-
-	  /* Abominable hack.  */
-	  if (current_target.to_has_execution == 0
-	      && ((saved_regs[FLAGS_REGNUM]
-		   && (read_memory_integer (saved_regs[FLAGS_REGNUM],
-					    TARGET_PTR_BIT / 8)
-		       & 0x2))
-		  || (saved_regs[FLAGS_REGNUM] == 0
-		      && read_register (FLAGS_REGNUM) & 0x2)))
-	    {
-	      u = find_unwind_entry (DEPRECATED_FRAME_SAVED_PC (frame));
-	      if (!u)
-		{
-		  return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
-					      TARGET_PTR_BIT / 8);
-		}
-	      else
-		{
-		  return frame_base - (u->Total_frame_size << 3);
-		}
-	    }
-
-	  return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
-				      TARGET_PTR_BIT / 8);
-	}
-    }
-  else
-    {
-      /* Get the innermost frame.  */
-      tmp_frame = frame;
-      while (get_next_frame (tmp_frame) != NULL)
-	tmp_frame = get_next_frame (tmp_frame);
-
-      if (tmp_frame != saved_regs_frame)
-	{
-	  hppa_frame_init_saved_regs (tmp_frame);
-	  saved_regs = deprecated_get_frame_saved_regs (tmp_frame);
-	}
-
-      /* Abominable hack.  See above.  */
-      if (current_target.to_has_execution == 0
-	  && ((saved_regs[FLAGS_REGNUM]
-	       && (read_memory_integer (saved_regs[FLAGS_REGNUM],
-					TARGET_PTR_BIT / 8)
-		   & 0x2))
-	      || (saved_regs[FLAGS_REGNUM] == 0
-		  && read_register (FLAGS_REGNUM) & 0x2)))
-	{
-	  u = find_unwind_entry (DEPRECATED_FRAME_SAVED_PC (frame));
-	  if (!u)
-	    {
-	      return read_memory_integer (saved_regs[DEPRECATED_FP_REGNUM],
-					  TARGET_PTR_BIT / 8);
-	    }
-	  else
-	    {
-	      return frame_base - (u->Total_frame_size << 3);
-	    }
-	}
-
-      /* The value in %r3 was never saved into the stack (thus %r3 still
-         holds the value of the previous frame pointer).  */
-      return deprecated_read_fp ();
-    }
-}
-
-
-/* To see if a frame chain is valid, see if the caller looks like it
-   was compiled with gcc. */
-
-int
-hppa_frame_chain_valid (CORE_ADDR chain, struct frame_info *thisframe)
-{
-  struct minimal_symbol *msym_us;
-  struct minimal_symbol *msym_start;
-  struct unwind_table_entry *u, *next_u = NULL;
-  struct frame_info *next;
-
-  u = find_unwind_entry (get_frame_pc (thisframe));
-
-  if (u == NULL)
-    return 1;
-
-  /* We can't just check that the same of msym_us is "_start", because
-     someone idiotically decided that they were going to make a Ltext_end
-     symbol with the same address.  This Ltext_end symbol is totally
-     indistinguishable (as nearly as I can tell) from the symbol for a function
-     which is (legitimately, since it is in the user's namespace)
-     named Ltext_end, so we can't just ignore it.  */
-  msym_us = lookup_minimal_symbol_by_pc (DEPRECATED_FRAME_SAVED_PC (thisframe));
-  msym_start = lookup_minimal_symbol ("_start", NULL, NULL);
-  if (msym_us
-      && msym_start
-      && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
-    return 0;
-
-  /* Grrrr.  Some new idiot decided that they don't want _start for the
-     PRO configurations; $START$ calls main directly....  Deal with it.  */
-  msym_start = lookup_minimal_symbol ("$START$", NULL, NULL);
-  if (msym_us
-      && msym_start
-      && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start))
-    return 0;
-
-  next = get_next_frame (thisframe);
-  if (next)
-    next_u = find_unwind_entry (get_frame_pc (next));
-
-  /* If this frame does not save SP, has no stack, isn't a stub,
-     and doesn't "call" an interrupt routine or signal handler caller,
-     then its not valid.  */
-  if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0
-      || (get_next_frame (thisframe) && (get_frame_type (get_next_frame (thisframe)) == SIGTRAMP_FRAME))
-      || (next_u && next_u->HP_UX_interrupt_marker))
-    return 1;
-
-  if (pc_in_linker_stub (get_frame_pc (thisframe)))
-    return 1;
-
-  return 0;
-}
-
-/* These functions deal with saving and restoring register state
-   around a function call in the inferior.  They keep the stack
-   double-word aligned;  eventually, on an hp700, the stack will have
-   to be aligned to a 64-byte boundary.  */
-
-void
-hppa_push_dummy_frame (void)
-{
-  CORE_ADDR sp, pc, pcspace;
-  int regnum;
-  CORE_ADDR int_buffer;
-  double freg_buffer;
-
-  pc = hppa_target_read_pc (inferior_ptid);
-  int_buffer = read_register (FLAGS_REGNUM);
-  if (int_buffer & 0x2)
-    {
-      const unsigned int sid = (pc >> 30) & 0x3;
-      if (sid == 0)
-	pcspace = read_register (SR4_REGNUM);
-      else
-	pcspace = read_register (SR4_REGNUM + 4 + sid);
-    }
-  else
-    pcspace = read_register (PCSQ_HEAD_REGNUM);
-
-  /* Space for "arguments"; the RP goes in here. */
-  sp = read_register (SP_REGNUM) + 48;
-  int_buffer = read_register (RP_REGNUM) | 0x3;
-
-  /* The 32bit and 64bit ABIs save the return pointer into different
-     stack slots.  */
-  if (DEPRECATED_REGISTER_SIZE == 8)
-    write_memory (sp - 16, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
-  else
-    write_memory (sp - 20, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
-
-  int_buffer = deprecated_read_fp ();
-  write_memory (sp, (char *) &int_buffer, DEPRECATED_REGISTER_SIZE);
-
-  write_register (DEPRECATED_FP_REGNUM, sp);
-
-  sp += 2 * DEPRECATED_REGISTER_SIZE;
-
-  for (regnum = 1; regnum < 32; regnum++)
-    if (regnum != RP_REGNUM && regnum != DEPRECATED_FP_REGNUM)
-      sp = push_word (sp, read_register (regnum));
-
-  /* This is not necessary for the 64bit ABI.  In fact it is dangerous.  */
-  if (DEPRECATED_REGISTER_SIZE != 8)
-    sp += 4;
-
-  for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++)
-    {
-      deprecated_read_register_bytes (DEPRECATED_REGISTER_BYTE (regnum),
-				      (char *) &freg_buffer, 8);
-      sp = push_bytes (sp, (char *) &freg_buffer, 8);
-    }
-  sp = push_word (sp, read_register (IPSW_REGNUM));
-  sp = push_word (sp, read_register (SAR_REGNUM));
-  sp = push_word (sp, pc);
-  sp = push_word (sp, pcspace);
-  sp = push_word (sp, pc + 4);
-  sp = push_word (sp, pcspace);
-  write_register (SP_REGNUM, sp);
-}
-
-static void
-find_dummy_frame_regs (struct frame_info *frame,
-		       CORE_ADDR frame_saved_regs[])
-{
-  CORE_ADDR fp = get_frame_base (frame);
-  int i;
-
-  /* The 32bit and 64bit ABIs save RP into different locations.  */
-  if (DEPRECATED_REGISTER_SIZE == 8)
-    frame_saved_regs[RP_REGNUM] = (fp - 16) & ~0x3;
-  else
-    frame_saved_regs[RP_REGNUM] = (fp - 20) & ~0x3;
-
-  frame_saved_regs[DEPRECATED_FP_REGNUM] = fp;
-
-  frame_saved_regs[1] = fp + (2 * DEPRECATED_REGISTER_SIZE);
-
-  for (fp += 3 * DEPRECATED_REGISTER_SIZE, i = 3; i < 32; i++)
-    {
-      if (i != DEPRECATED_FP_REGNUM)
-	{
-	  frame_saved_regs[i] = fp;
-	  fp += DEPRECATED_REGISTER_SIZE;
-	}
-    }
-
-  /* This is not necessary or desirable for the 64bit ABI.  */
-  if (DEPRECATED_REGISTER_SIZE != 8)
-    fp += 4;
-
-  for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8)
-    frame_saved_regs[i] = fp;
-
-  frame_saved_regs[IPSW_REGNUM] = fp;
-  frame_saved_regs[SAR_REGNUM] = fp + DEPRECATED_REGISTER_SIZE;
-  frame_saved_regs[PCOQ_HEAD_REGNUM] = fp + 2 * DEPRECATED_REGISTER_SIZE;
-  frame_saved_regs[PCSQ_HEAD_REGNUM] = fp + 3 * DEPRECATED_REGISTER_SIZE;
-  frame_saved_regs[PCOQ_TAIL_REGNUM] = fp + 4 * DEPRECATED_REGISTER_SIZE;
-  frame_saved_regs[PCSQ_TAIL_REGNUM] = fp + 5 * DEPRECATED_REGISTER_SIZE;
-}
-
-void
-hppa_pop_frame (void)
-{
-  struct frame_info *frame = get_current_frame ();
-  CORE_ADDR fp, npc, target_pc;
-  int regnum;
-  CORE_ADDR *fsr;
-  double freg_buffer;
-
-  fp = get_frame_base (frame);
-  hppa_frame_init_saved_regs (frame);
-  fsr = deprecated_get_frame_saved_regs (frame);
-
-#ifndef NO_PC_SPACE_QUEUE_RESTORE
-  if (fsr[IPSW_REGNUM])	/* Restoring a call dummy frame */
-    restore_pc_queue (fsr);
-#endif
-
-  for (regnum = 31; regnum > 0; regnum--)
-    if (fsr[regnum])
-      write_register (regnum, read_memory_integer (fsr[regnum],
-						   DEPRECATED_REGISTER_SIZE));
-
-  for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM; regnum--)
-    if (fsr[regnum])
-      {
-	read_memory (fsr[regnum], (char *) &freg_buffer, 8);
-	deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (regnum),
-					 (char *) &freg_buffer, 8);
-      }
-
-  if (fsr[IPSW_REGNUM])
-    write_register (IPSW_REGNUM,
-		    read_memory_integer (fsr[IPSW_REGNUM],
-					 DEPRECATED_REGISTER_SIZE));
-
-  if (fsr[SAR_REGNUM])
-    write_register (SAR_REGNUM,
-		    read_memory_integer (fsr[SAR_REGNUM],
-					 DEPRECATED_REGISTER_SIZE));
-
-  /* If the PC was explicitly saved, then just restore it.  */
-  if (fsr[PCOQ_TAIL_REGNUM])
-    {
-      npc = read_memory_integer (fsr[PCOQ_TAIL_REGNUM],
-				 DEPRECATED_REGISTER_SIZE);
-      write_register (PCOQ_TAIL_REGNUM, npc);
-    }
-  /* Else use the value in %rp to set the new PC.  */
-  else
-    {
-      npc = read_register (RP_REGNUM);
-      write_pc (npc);
-    }
-
-  write_register (DEPRECATED_FP_REGNUM, read_memory_integer (fp, DEPRECATED_REGISTER_SIZE));
-
-  if (fsr[IPSW_REGNUM])	/* call dummy */
-    write_register (SP_REGNUM, fp - 48);
-  else
-    write_register (SP_REGNUM, fp);
-
-  /* The PC we just restored may be inside a return trampoline.  If so
-     we want to restart the inferior and run it through the trampoline.
-
-     Do this by setting a momentary breakpoint at the location the
-     trampoline returns to. 
-
-     Don't skip through the trampoline if we're popping a dummy frame.  */
-  target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3;
-  if (target_pc && !fsr[IPSW_REGNUM])
-    {
-      struct symtab_and_line sal;
-      struct breakpoint *breakpoint;
-      struct cleanup *old_chain;
-
-      /* Set up our breakpoint.   Set it to be silent as the MI code
-         for "return_command" will print the frame we returned to.  */
-      sal = find_pc_line (target_pc, 0);
-      sal.pc = target_pc;
-      breakpoint = set_momentary_breakpoint (sal, null_frame_id, bp_finish);
-      breakpoint->silent = 1;
-
-      /* So we can clean things up.  */
-      old_chain = make_cleanup_delete_breakpoint (breakpoint);
-
-      /* Start up the inferior.  */
-      clear_proceed_status ();
-      proceed_to_finish = 1;
-      proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0);
-
-      /* Perform our cleanups.  */
-      do_cleanups (old_chain);
-    }
-  flush_cached_frames ();
-}
-
-/* After returning to a dummy on the stack, restore the instruction
-   queue space registers. */
-
-static int
-restore_pc_queue (CORE_ADDR *fsr)
-{
-  CORE_ADDR pc = read_pc ();
-  CORE_ADDR new_pc = read_memory_integer (fsr[PCOQ_HEAD_REGNUM],
-					  TARGET_PTR_BIT / 8);
-  struct target_waitstatus w;
-  int insn_count;
-
-  /* Advance past break instruction in the call dummy. */
-  write_register (PCOQ_HEAD_REGNUM, pc + 4);
-  write_register (PCOQ_TAIL_REGNUM, pc + 8);
-
-  /* HPUX doesn't let us set the space registers or the space
-     registers of the PC queue through ptrace. Boo, hiss.
-     Conveniently, the call dummy has this sequence of instructions
-     after the break:
-     mtsp r21, sr0
-     ble,n 0(sr0, r22)
-
-     So, load up the registers and single step until we are in the
-     right place. */
-
-  write_register (21, read_memory_integer (fsr[PCSQ_HEAD_REGNUM],
-					   DEPRECATED_REGISTER_SIZE));
-  write_register (22, new_pc);
-
-  for (insn_count = 0; insn_count < 3; insn_count++)
-    {
-      /* FIXME: What if the inferior gets a signal right now?  Want to
-         merge this into wait_for_inferior (as a special kind of
-         watchpoint?  By setting a breakpoint at the end?  Is there
-         any other choice?  Is there *any* way to do this stuff with
-         ptrace() or some equivalent?).  */
-      resume (1, 0);
-      target_wait (inferior_ptid, &w);
-
-      if (w.kind == TARGET_WAITKIND_SIGNALLED)
-	{
-	  stop_signal = w.value.sig;
-	  terminal_ours_for_output ();
-	  printf_unfiltered ("\nProgram terminated with signal %s, %s.\n",
-			     target_signal_to_name (stop_signal),
-			     target_signal_to_string (stop_signal));
-	  gdb_flush (gdb_stdout);
-	  return 0;
-	}
-    }
-  target_terminal_ours ();
-  target_fetch_registers (-1);
-  return 1;
-}
-
-
-#ifdef PA20W_CALLING_CONVENTIONS
-
-/* This function pushes a stack frame with arguments as part of the
-   inferior function calling mechanism.
-
-   This is the version for the PA64, in which later arguments appear
-   at higher addresses.  (The stack always grows towards higher
-   addresses.)
-
-   We simply allocate the appropriate amount of stack space and put
-   arguments into their proper slots.  The call dummy code will copy
-   arguments into registers as needed by the ABI.
-
-   This ABI also requires that the caller provide an argument pointer
-   to the callee, so we do that too.  */
-   
-CORE_ADDR
-hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
-		     int struct_return, CORE_ADDR struct_addr)
-{
-  /* array of arguments' offsets */
-  int *offset = (int *) alloca (nargs * sizeof (int));
-
-  /* array of arguments' lengths: real lengths in bytes, not aligned to
-     word size */
-  int *lengths = (int *) alloca (nargs * sizeof (int));
-
-  /* The value of SP as it was passed into this function after
-     aligning.  */
-  CORE_ADDR orig_sp = DEPRECATED_STACK_ALIGN (sp);
-
-  /* The number of stack bytes occupied by the current argument.  */
-  int bytes_reserved;
-
-  /* The total number of bytes reserved for the arguments.  */
-  int cum_bytes_reserved = 0;
-
-  /* Similarly, but aligned.  */
-  int cum_bytes_aligned = 0;
-  int i;
-
-  /* Iterate over each argument provided by the user.  */
-  for (i = 0; i < nargs; i++)
-    {
-      struct type *arg_type = VALUE_TYPE (args[i]);
-
-      /* Integral scalar values smaller than a register are padded on
-         the left.  We do this by promoting them to full-width,
-         although the ABI says to pad them with garbage.  */
-      if (is_integral_type (arg_type)
-	  && TYPE_LENGTH (arg_type) < DEPRECATED_REGISTER_SIZE)
-	{
-	  args[i] = value_cast ((TYPE_UNSIGNED (arg_type)
-				 ? builtin_type_unsigned_long
-				 : builtin_type_long),
-				args[i]);
-	  arg_type = VALUE_TYPE (args[i]);
-	}
-
-      lengths[i] = TYPE_LENGTH (arg_type);
-
-      /* Align the size of the argument to the word size for this
-	 target.  */
-      bytes_reserved = (lengths[i] + DEPRECATED_REGISTER_SIZE - 1) & -DEPRECATED_REGISTER_SIZE;
-
-      offset[i] = cum_bytes_reserved;
-
-      /* Aggregates larger than eight bytes (the only types larger
-         than eight bytes we have) are aligned on a 16-byte boundary,
-         possibly padded on the right with garbage.  This may leave an
-         empty word on the stack, and thus an unused register, as per
-         the ABI.  */
-      if (bytes_reserved > 8)
-	{
-	  /* Round up the offset to a multiple of two slots.  */
-	  int new_offset = ((offset[i] + 2*DEPRECATED_REGISTER_SIZE-1)
-			    & -(2*DEPRECATED_REGISTER_SIZE));
-
-	  /* Note the space we've wasted, if any.  */
-	  bytes_reserved += new_offset - offset[i];
-	  offset[i] = new_offset;
-	}
-
-      cum_bytes_reserved += bytes_reserved;
-    }
-
-  /* CUM_BYTES_RESERVED already accounts for all the arguments
-     passed by the user.  However, the ABIs mandate minimum stack space
-     allocations for outgoing arguments.
-
-     The ABIs also mandate minimum stack alignments which we must
-     preserve.  */
-  cum_bytes_aligned = DEPRECATED_STACK_ALIGN (cum_bytes_reserved);
-  sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
-
-  /* Now write each of the args at the proper offset down the stack.  */
-  for (i = 0; i < nargs; i++)
-    write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
-
-  /* If a structure has to be returned, set up register 28 to hold its
-     address */
-  if (struct_return)
-    write_register (28, struct_addr);
-
-  /* For the PA64 we must pass a pointer to the outgoing argument list.
-     The ABI mandates that the pointer should point to the first byte of
-     storage beyond the register flushback area.
-
-     However, the call dummy expects the outgoing argument pointer to
-     be passed in register %r4.  */
-  write_register (4, orig_sp + REG_PARM_STACK_SPACE);
-
-  /* ?!? This needs further work.  We need to set up the global data
-     pointer for this procedure.  This assumes the same global pointer
-     for every procedure.   The call dummy expects the dp value to
-     be passed in register %r6.  */
-  write_register (6, read_register (27));
-  
-  /* The stack will have 64 bytes of additional space for a frame marker.  */
-  return sp + 64;
-}
-
-#else
-
-/* This function pushes a stack frame with arguments as part of the
-   inferior function calling mechanism.
-
-   This is the version of the function for the 32-bit PA machines, in
-   which later arguments appear at lower addresses.  (The stack always
-   grows towards higher addresses.)
-
-   We simply allocate the appropriate amount of stack space and put
-   arguments into their proper slots.  The call dummy code will copy
-   arguments into registers as needed by the ABI. */
-   
-CORE_ADDR
-hppa_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
-		     int struct_return, CORE_ADDR struct_addr)
-{
-  /* array of arguments' offsets */
-  int *offset = (int *) alloca (nargs * sizeof (int));
-
-  /* array of arguments' lengths: real lengths in bytes, not aligned to
-     word size */
-  int *lengths = (int *) alloca (nargs * sizeof (int));
-
-  /* The number of stack bytes occupied by the current argument.  */
-  int bytes_reserved;
-
-  /* The total number of bytes reserved for the arguments.  */
-  int cum_bytes_reserved = 0;
-
-  /* Similarly, but aligned.  */
-  int cum_bytes_aligned = 0;
-  int i;
-
-  /* Iterate over each argument provided by the user.  */
-  for (i = 0; i < nargs; i++)
-    {
-      lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i]));
-
-      /* Align the size of the argument to the word size for this
-	 target.  */
-      bytes_reserved = (lengths[i] + DEPRECATED_REGISTER_SIZE - 1) & -DEPRECATED_REGISTER_SIZE;
-
-      offset[i] = (cum_bytes_reserved
-		   + (lengths[i] > 4 ? bytes_reserved : lengths[i]));
-
-      /* If the argument is a double word argument, then it needs to be
-	 double word aligned.  */
-      if ((bytes_reserved == 2 * DEPRECATED_REGISTER_SIZE)
-	  && (offset[i] % 2 * DEPRECATED_REGISTER_SIZE))
-	{
-	  int new_offset = 0;
-	  /* BYTES_RESERVED is already aligned to the word, so we put
-	     the argument at one word more down the stack.
-
-	     This will leave one empty word on the stack, and one unused
-	     register as mandated by the ABI.  */
-	  new_offset = ((offset[i] + 2 * DEPRECATED_REGISTER_SIZE - 1)
-			& -(2 * DEPRECATED_REGISTER_SIZE));
-
-	  if ((new_offset - offset[i]) >= 2 * DEPRECATED_REGISTER_SIZE)
-	    {
-	      bytes_reserved += DEPRECATED_REGISTER_SIZE;
-	      offset[i] += DEPRECATED_REGISTER_SIZE;
-	    }
-	}
-
-      cum_bytes_reserved += bytes_reserved;
-
-    }
+    "fr12",   "fr13",    "fr14",   "fr15",
+    "fr16",    "fr17",   "fr18",   "fr19",
+    "fr20",   "fr21",    "fr22",   "fr23",
+    "fr24",    "fr25",   "fr26",   "fr27",
+    "fr28",  "fr29",    "fr30",   "fr31"
+  };
+  if (i < 0 || i >= (sizeof (names) / sizeof (*names)))
+    return NULL;
+  else
+    return names[i];
+}
 
-  /* CUM_BYTES_RESERVED already accounts for all the arguments passed
-     by the user.  However, the ABI mandates minimum stack space
-     allocations for outgoing arguments.
 
-     The ABI also mandates minimum stack alignments which we must
-     preserve.  */
-  cum_bytes_aligned = DEPRECATED_STACK_ALIGN (cum_bytes_reserved);
-  sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE);
 
-  /* Now write each of the args at the proper offset down the stack.
-     ?!? We need to promote values to a full register instead of skipping
-     words in the stack.  */
-  for (i = 0; i < nargs; i++)
-    write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]);
+/* Return the adjustment necessary to make for addresses on the stack
+   as presented by hpread.c.
 
-  /* If a structure has to be returned, set up register 28 to hold its
-     address */
-  if (struct_return)
-    write_register (28, struct_addr);
+   This is necessary because of the stack direction on the PA and the
+   bizarre way in which someone (?) decided they wanted to handle
+   frame pointerless code in GDB.  */
+int
+hpread_adjust_stack_address (CORE_ADDR func_addr)
+{
+  struct unwind_table_entry *u;
 
-  /* The stack will have 32 bytes of additional space for a frame marker.  */
-  return sp + 32;
+  u = find_unwind_entry (func_addr);
+  if (!u)
+    return 0;
+  else
+    return u->Total_frame_size << 3;
 }
 
-#endif
-
 /* This function pushes a stack frame with arguments as part of the
    inferior function calling mechanism.
 
@@ -2509,400 +1160,6 @@
   return 0;
 }
 
-/* Insert the specified number of args and function address
-   into a call sequence of the above form stored at DUMMYNAME.
-
-   On the hppa we need to call the stack dummy through $$dyncall.
-   Therefore our version of DEPRECATED_FIX_CALL_DUMMY takes an extra
-   argument, real_pc, which is the location where gdb should start up
-   the inferior to do the function call.
-
-   This has to work across several versions of hpux, bsd, osf1.  It has to
-   work regardless of what compiler was used to build the inferior program.
-   It should work regardless of whether or not end.o is available.  It has
-   to work even if gdb can not call into the dynamic loader in the inferior
-   to query it for symbol names and addresses.
-
-   Yes, all those cases should work.  Luckily code exists to handle most
-   of them.  The complexity is in selecting exactly what scheme should
-   be used to perform the inferior call.
-
-   At the current time this routine is known not to handle cases where
-   the program was linked with HP's compiler without including end.o.
-
-   Please contact Jeff Law (law@cygnus.com) before changing this code.  */
-
-CORE_ADDR
-hppa_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
-		     struct value **args, struct type *type, int gcc_p)
-{
-  CORE_ADDR dyncall_addr;
-  struct minimal_symbol *msymbol;
-  struct minimal_symbol *trampoline;
-  int flags = read_register (FLAGS_REGNUM);
-  struct unwind_table_entry *u = NULL;
-  CORE_ADDR new_stub = 0;
-  CORE_ADDR solib_handle = 0;
-
-  /* Nonzero if we will use GCC's PLT call routine.  This routine must be
-     passed an import stub, not a PLABEL.  It is also necessary to set %r19
-     (the PIC register) before performing the call.
-
-     If zero, then we are using __d_plt_call (HP's PLT call routine) or we
-     are calling the target directly.  When using __d_plt_call we want to
-     use a PLABEL instead of an import stub.  */
-  int using_gcc_plt_call = 1;
-
-#ifdef GDB_TARGET_IS_HPPA_20W
-  /* We currently use completely different code for the PA2.0W inferior
-     function call sequences.  This needs to be cleaned up.  */
-  {
-    CORE_ADDR pcsqh, pcsqt, pcoqh, pcoqt, sr5;
-    struct target_waitstatus w;
-    int inst1, inst2;
-    char buf[4];
-    int status;
-    struct objfile *objfile;
-
-    /* We can not modify the PC space queues directly, so we start
-       up the inferior and execute a couple instructions to set the
-       space queues so that they point to the call dummy in the stack.  */
-    pcsqh = read_register (PCSQ_HEAD_REGNUM);
-    sr5 = read_register (SR5_REGNUM);
-    if (1)
-      {
-        pcoqh = read_register (PCOQ_HEAD_REGNUM);
-        pcoqt = read_register (PCOQ_TAIL_REGNUM);
-        if (target_read_memory (pcoqh, buf, 4) != 0)
-          error ("Couldn't modify space queue\n");
-        inst1 = extract_unsigned_integer (buf, 4);
-
-        if (target_read_memory (pcoqt, buf, 4) != 0)
-          error ("Couldn't modify space queue\n");
-        inst2 = extract_unsigned_integer (buf, 4);
-
-        /* BVE (r1) */
-        *((int *) buf) = 0xe820d000;
-        if (target_write_memory (pcoqh, buf, 4) != 0)
-          error ("Couldn't modify space queue\n");
-
-        /* NOP */
-        *((int *) buf) = 0x08000240;
-        if (target_write_memory (pcoqt, buf, 4) != 0)
-          {
-            *((int *) buf) = inst1;
-            target_write_memory (pcoqh, buf, 4);
-            error ("Couldn't modify space queue\n");
-          }
-
-        write_register (1, pc);
-
-        /* Single step twice, the BVE instruction will set the space queue
-	   such that it points to the PC value written immediately above
-	   (ie the call dummy).  */
-        resume (1, 0);
-        target_wait (inferior_ptid, &w);
-        resume (1, 0);
-        target_wait (inferior_ptid, &w);
-
-	/* Restore the two instructions at the old PC locations.  */
-        *((int *) buf) = inst1;
-        target_write_memory (pcoqh, buf, 4);
-        *((int *) buf) = inst2;
-        target_write_memory (pcoqt, buf, 4);
-      }
-
-    /* The call dummy wants the ultimate destination address initially
-       in register %r5.  */
-    write_register (5, fun);
-
-    /* We need to see if this objfile has a different DP value than our
-       own (it could be a shared library for example).  */
-    ALL_OBJFILES (objfile)
-      {
-	struct obj_section *s;
-	obj_private_data_t *obj_private;
-
-	/* See if FUN is in any section within this shared library.  */
-	for (s = objfile->sections; s < objfile->sections_end; s++)
-	  if (s->addr <= fun && fun < s->endaddr)
-	    break;
-
-        if (s >= objfile->sections_end)
-	  continue;
-
-	obj_private = (obj_private_data_t *) objfile->obj_private;
-	
-	/* The DP value may be different for each objfile.  But within an
-	   objfile each function uses the same dp value.  Thus we do not need
-	   to grope around the opd section looking for dp values.
-
-	   ?!? This is not strictly correct since we may be in a shared library
-	   and want to call back into the main program.  To make that case
-	   work correctly we need to set obj_private->dp for the main program's
-	   objfile, then remove this conditional.  */
-	if (obj_private->dp)
-	  write_register (27, obj_private->dp);
-	break;
-      }
-    return pc;
-  }
-#endif
-
-#ifndef GDB_TARGET_IS_HPPA_20W
-  /* Prefer __gcc_plt_call over the HP supplied routine because
-     __gcc_plt_call works for any number of arguments.  */
-  trampoline = NULL;
-  if (lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL) == NULL)
-    using_gcc_plt_call = 0;
-
-  msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL);
-  if (msymbol == NULL)
-    error ("Can't find an address for $$dyncall trampoline");
-
-  dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol);
-
-  /* FUN could be a procedure label, in which case we have to get
-     its real address and the value of its GOT/DP if we plan to
-     call the routine via gcc_plt_call.  */
-  if ((fun & 0x2) && using_gcc_plt_call)
-    {
-      /* Get the GOT/DP value for the target function.  It's
-         at *(fun+4).  Note the call dummy is *NOT* allowed to
-         trash %r19 before calling the target function.  */
-      write_register (19, read_memory_integer ((fun & ~0x3) + 4,
-					       DEPRECATED_REGISTER_SIZE));
-
-      /* Now get the real address for the function we are calling, it's
-         at *fun.  */
-      fun = (CORE_ADDR) read_memory_integer (fun & ~0x3,
-					     TARGET_PTR_BIT / 8);
-    }
-  else
-    {
-
-#ifndef GDB_TARGET_IS_PA_ELF
-      /* FUN could be an export stub, the real address of a function, or
-         a PLABEL.  When using gcc's PLT call routine we must call an import
-         stub rather than the export stub or real function for lazy binding
-         to work correctly
-
-         If we are using the gcc PLT call routine, then we need to
-         get the import stub for the target function.  */
-      if (using_gcc_plt_call && som_solib_get_got_by_pc (fun))
-	{
-	  struct objfile *objfile;
-	  struct minimal_symbol *funsymbol, *stub_symbol;
-	  CORE_ADDR newfun = 0;
-
-	  funsymbol = lookup_minimal_symbol_by_pc (fun);
-	  if (!funsymbol)
-	    error ("Unable to find minimal symbol for target function.\n");
-
-	  /* Search all the object files for an import symbol with the
-	     right name. */
-	  ALL_OBJFILES (objfile)
-	  {
-	    stub_symbol
-	      = lookup_minimal_symbol_solib_trampoline
-	      (DEPRECATED_SYMBOL_NAME (funsymbol), objfile);
-
-	    if (!stub_symbol)
-	      stub_symbol = lookup_minimal_symbol (DEPRECATED_SYMBOL_NAME (funsymbol),
-						   NULL, objfile);
-
-	    /* Found a symbol with the right name.  */
-	    if (stub_symbol)
-	      {
-		struct unwind_table_entry *u;
-		/* It must be a shared library trampoline.  */
-		if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline)
-		  continue;
-
-		/* It must also be an import stub.  */
-		u = find_unwind_entry (SYMBOL_VALUE (stub_symbol));
-		if (u == NULL
-		    || (u->stub_unwind.stub_type != IMPORT
-#ifdef GDB_NATIVE_HPUX_11
-			/* Sigh.  The hpux 10.20 dynamic linker will blow
-			   chunks if we perform a call to an unbound function
-			   via the IMPORT_SHLIB stub.  The hpux 11.00 dynamic
-			   linker will blow chunks if we do not call the
-			   unbound function via the IMPORT_SHLIB stub.
-
-			   We currently have no way to select bevahior on just
-			   the target.  However, we only support HPUX/SOM in
-			   native mode.  So we conditinalize on a native
-			   #ifdef.  Ugly.  Ugly.  Ugly  */
-			&& u->stub_unwind.stub_type != IMPORT_SHLIB
-#endif
-			))
-		  continue;
-
-		/* OK.  Looks like the correct import stub.  */
-		newfun = SYMBOL_VALUE (stub_symbol);
-		fun = newfun;
-
-		/* If we found an IMPORT stub, then we want to stop
-		   searching now.  If we found an IMPORT_SHLIB, we want
-		   to continue the search in the hopes that we will find
-		   an IMPORT stub.  */
-		if (u->stub_unwind.stub_type == IMPORT)
-		  break;
-	      }
-	  }
-
-	  /* Ouch.  We did not find an import stub.  Make an attempt to
-	     do the right thing instead of just croaking.  Most of the
-	     time this will actually work.  */
-	  if (newfun == 0)
-	    write_register (19, som_solib_get_got_by_pc (fun));
-
-	  u = find_unwind_entry (fun);
-	  if (u
-	      && (u->stub_unwind.stub_type == IMPORT
-		  || u->stub_unwind.stub_type == IMPORT_SHLIB))
-	    trampoline = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL);
-
-	  /* If we found the import stub in the shared library, then we have
-	     to set %r19 before we call the stub.  */
-	  if (u && u->stub_unwind.stub_type == IMPORT_SHLIB)
-	    write_register (19, som_solib_get_got_by_pc (fun));
-	}
-#endif
-    }
-
-  /* If we are calling into another load module then have sr4export call the
-     magic __d_plt_call routine which is linked in from end.o.
-
-     You can't use _sr4export to make the call as the value in sp-24 will get
-     fried and you end up returning to the wrong location.  You can't call the
-     target as the code to bind the PLT entry to a function can't return to a
-     stack address.
-
-     Also, query the dynamic linker in the inferior to provide a suitable
-     PLABEL for the target function.  */
-  if (!using_gcc_plt_call)
-    {
-      CORE_ADDR new_fun;
-
-      /* Get a handle for the shared library containing FUN.  Given the
-         handle we can query the shared library for a PLABEL.  */
-      solib_handle = som_solib_get_solib_by_pc (fun);
-
-      if (solib_handle)
-	{
-	  struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc (fun);
-
-	  trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL);
-
-	  if (trampoline == NULL)
-	    {
-	      error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g or compiling with gcc.");
-	    }
-
-	  /* This is where sr4export will jump to.  */
-	  new_fun = SYMBOL_VALUE_ADDRESS (trampoline);
-
-	  /* If the function is in a shared library, then call __d_shl_get to
-	     get a PLABEL for the target function.  */
-	  new_stub = find_stub_with_shl_get (fmsymbol, solib_handle);
-
-	  if (new_stub == 0)
-	    error ("Can't find an import stub for %s", DEPRECATED_SYMBOL_NAME (fmsymbol));
-
-	  /* We have to store the address of the stub in __shlib_funcptr.  */
-	  msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL,
-					   (struct objfile *) NULL);
-
-	  if (msymbol == NULL)
-	    error ("Can't find an address for __shlib_funcptr");
-	  target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol),
-			       (char *) &new_stub, 4);
-
-	  /* We want sr4export to call __d_plt_call, so we claim it is
-	     the final target.  Clear trampoline.  */
-	  fun = new_fun;
-	  trampoline = NULL;
-	}
-    }
-
-  /* Store upper 21 bits of function address into ldil.  fun will either be
-     the final target (most cases) or __d_plt_call when calling into a shared
-     library and __gcc_plt_call is not available.  */
-  store_unsigned_integer
-    (&dummy[FUNC_LDIL_OFFSET],
-     INSTRUCTION_SIZE,
-     deposit_21 (fun >> 11,
-		 extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET],
-					   INSTRUCTION_SIZE)));
-
-  /* Store lower 11 bits of function address into ldo */
-  store_unsigned_integer
-    (&dummy[FUNC_LDO_OFFSET],
-     INSTRUCTION_SIZE,
-     deposit_14 (fun & MASK_11,
-		 extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET],
-					   INSTRUCTION_SIZE)));
-#ifdef SR4EXPORT_LDIL_OFFSET
-
-  {
-    CORE_ADDR trampoline_addr;
-
-    /* We may still need sr4export's address too.  */
-
-    if (trampoline == NULL)
-      {
-	msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL);
-	if (msymbol == NULL)
-	  error ("Can't find an address for _sr4export trampoline");
-
-	trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol);
-      }
-    else
-      trampoline_addr = SYMBOL_VALUE_ADDRESS (trampoline);
-
-
-    /* Store upper 21 bits of trampoline's address into ldil */
-    store_unsigned_integer
-      (&dummy[SR4EXPORT_LDIL_OFFSET],
-       INSTRUCTION_SIZE,
-       deposit_21 (trampoline_addr >> 11,
-		   extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET],
-					     INSTRUCTION_SIZE)));
-
-    /* Store lower 11 bits of trampoline's address into ldo */
-    store_unsigned_integer
-      (&dummy[SR4EXPORT_LDO_OFFSET],
-       INSTRUCTION_SIZE,
-       deposit_14 (trampoline_addr & MASK_11,
-		   extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET],
-					     INSTRUCTION_SIZE)));
-  }
-#endif
-
-  write_register (22, pc);
-
-  /* If we are in a syscall, then we should call the stack dummy
-     directly.  $$dyncall is not needed as the kernel sets up the
-     space id registers properly based on the value in %r31.  In
-     fact calling $$dyncall will not work because the value in %r22
-     will be clobbered on the syscall exit path. 
-
-     Similarly if the current PC is in a shared library.  Note however,
-     this scheme won't work if the shared library isn't mapped into
-     the same space as the stack.  */
-  if (flags & 2)
-    return pc;
-#ifndef GDB_TARGET_IS_PA_ELF
-  else if (som_solib_get_got_by_pc (hppa_target_read_pc (inferior_ptid)))
-    return pc;
-#endif
-  else
-    return dyncall_addr;
-#endif
-}
-
 /* If the pid is in a syscall, then the FP register is not readable.
    We'll return zero in that case, rather than attempting to read it
    and cause a warning. */
@@ -4331,262 +2588,6 @@
     return (skip_prologue_hard_way (pc));
 }
 
-/* Put here the code to store, into the SAVED_REGS, the addresses of
-   the saved registers of frame described by FRAME_INFO.  This
-   includes special registers such as pc and fp saved in special ways
-   in the stack frame.  sp is even more special: the address we return
-   for it IS the sp for the next frame.  */
-
-void
-hppa_frame_find_saved_regs (struct frame_info *frame_info,
-			    CORE_ADDR frame_saved_regs[])
-{
-  CORE_ADDR pc;
-  struct unwind_table_entry *u;
-  unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp;
-  int status, i, reg;
-  char buf[4];
-  int fp_loc = -1;
-  int final_iteration;
-
-  /* Zero out everything.  */
-  memset (frame_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS);
-
-  /* Call dummy frames always look the same, so there's no need to
-     examine the dummy code to determine locations of saved registers;
-     instead, let find_dummy_frame_regs fill in the correct offsets
-     for the saved registers.  */
-  if ((get_frame_pc (frame_info) >= get_frame_base (frame_info)
-       && (get_frame_pc (frame_info)
-	   <= (get_frame_base (frame_info)
-	       /* A call dummy is sized in words, but it is actually a
-		  series of instructions.  Account for that scaling
-		  factor.  */
-	       + ((DEPRECATED_REGISTER_SIZE / INSTRUCTION_SIZE)
-		  * DEPRECATED_CALL_DUMMY_LENGTH)
-	       /* Similarly we have to account for 64bit wide register
-		  saves.  */
-	       + (32 * DEPRECATED_REGISTER_SIZE)
-	       /* We always consider FP regs 8 bytes long.  */
-	       + (NUM_REGS - FP0_REGNUM) * 8
-	       /* Similarly we have to account for 64bit wide register
-		  saves.  */
-	       + (6 * DEPRECATED_REGISTER_SIZE)))))
-    find_dummy_frame_regs (frame_info, frame_saved_regs);
-
-  /* Interrupt handlers are special too.  They lay out the register
-     state in the exact same order as the register numbers in GDB.  */
-  if (pc_in_interrupt_handler (get_frame_pc (frame_info)))
-    {
-      for (i = 0; i < NUM_REGS; i++)
-	{
-	  /* SP is a little special.  */
-	  if (i == SP_REGNUM)
-	    frame_saved_regs[SP_REGNUM]
-	      = read_memory_integer (get_frame_base (frame_info) + SP_REGNUM * 4,
-				     TARGET_PTR_BIT / 8);
-	  else
-	    frame_saved_regs[i] = get_frame_base (frame_info) + i * 4;
-	}
-      return;
-    }
-
-#ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP
-  /* Handle signal handler callers.  */
-  if ((get_frame_type (frame_info) == SIGTRAMP_FRAME))
-    {
-      FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs);
-      return;
-    }
-#endif
-
-  /* Get the starting address of the function referred to by the PC
-     saved in frame.  */
-  pc = get_frame_func (frame_info);
-
-  /* Yow! */
-  u = find_unwind_entry (pc);
-  if (!u)
-    return;
-
-  /* This is how much of a frame adjustment we need to account for.  */
-  stack_remaining = u->Total_frame_size << 3;
-
-  /* Magic register saves we want to know about.  */
-  save_rp = u->Save_RP;
-  save_sp = u->Save_SP;
-
-  /* Turn the Entry_GR field into a bitmask.  */
-  save_gr = 0;
-  for (i = 3; i < u->Entry_GR + 3; i++)
-    {
-      /* Frame pointer gets saved into a special location.  */
-      if (u->Save_SP && i == DEPRECATED_FP_REGNUM)
-	continue;
-
-      save_gr |= (1 << i);
-    }
-
-  /* Turn the Entry_FR field into a bitmask too.  */
-  save_fr = 0;
-  for (i = 12; i < u->Entry_FR + 12; i++)
-    save_fr |= (1 << i);
-
-  /* The frame always represents the value of %sp at entry to the
-     current function (and is thus equivalent to the "saved" stack
-     pointer.  */
-  frame_saved_regs[SP_REGNUM] = get_frame_base (frame_info);
-
-  /* Loop until we find everything of interest or hit a branch.
-
-     For unoptimized GCC code and for any HP CC code this will never ever
-     examine any user instructions.
-
-     For optimized GCC code we're faced with problems.  GCC will schedule
-     its prologue and make prologue instructions available for delay slot
-     filling.  The end result is user code gets mixed in with the prologue
-     and a prologue instruction may be in the delay slot of the first branch
-     or call.
-
-     Some unexpected things are expected with debugging optimized code, so
-     we allow this routine to walk past user instructions in optimized
-     GCC code.  */
-  final_iteration = 0;
-  while ((save_gr || save_fr || save_rp || save_sp || stack_remaining > 0)
-	 && pc <= get_frame_pc (frame_info))
-    {
-      status = target_read_memory (pc, buf, 4);
-      inst = extract_unsigned_integer (buf, 4);
-
-      /* Yow! */
-      if (status != 0)
-	return;
-
-      /* Note the interesting effects of this instruction.  */
-      stack_remaining -= prologue_inst_adjust_sp (inst);
-
-      /* There are limited ways to store the return pointer into the
-	 stack.  */
-      if (inst == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */
-	{
-	  save_rp = 0;
-	  frame_saved_regs[RP_REGNUM] = get_frame_base (frame_info) - 20;
-	}
-      else if (inst == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */
-	{
-	  save_rp = 0;
-	  frame_saved_regs[RP_REGNUM] = get_frame_base (frame_info) - 16;
-	}
-
-      /* Note if we saved SP into the stack.  This also happens to indicate
-	 the location of the saved frame pointer.  */
-      if (   (inst & 0xffffc000) == 0x6fc10000  /* stw,ma r1,N(sr0,sp) */
-          || (inst & 0xffffc00c) == 0x73c10008) /* std,ma r1,N(sr0,sp) */
-	{
-	  frame_saved_regs[DEPRECATED_FP_REGNUM] = get_frame_base (frame_info);
-	  save_sp = 0;
-	}
-
-      /* Account for general and floating-point register saves.  */
-      reg = inst_saves_gr (inst);
-      if (reg >= 3 && reg <= 18
-	  && (!u->Save_SP || reg != DEPRECATED_FP_REGNUM))
-	{
-	  save_gr &= ~(1 << reg);
-
-	  /* stwm with a positive displacement is a *post modify*.  */
-	  if ((inst >> 26) == 0x1b
-	      && extract_14 (inst) >= 0)
-	    frame_saved_regs[reg] = get_frame_base (frame_info);
-	  /* A std has explicit post_modify forms.  */
-	  else if ((inst & 0xfc00000c) == 0x70000008)
-	    frame_saved_regs[reg] = get_frame_base (frame_info);
-	  else
-	    {
-	      CORE_ADDR offset;
-
-	      if ((inst >> 26) == 0x1c)
-		offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3);
-	      else if ((inst >> 26) == 0x03)
-		offset = low_sign_extend (inst & 0x1f, 5);
-	      else
-		offset = extract_14 (inst);
-
-	      /* Handle code with and without frame pointers.  */
-	      if (u->Save_SP)
-		frame_saved_regs[reg]
-		  = get_frame_base (frame_info) + offset;
-	      else
-		frame_saved_regs[reg]
-		  = (get_frame_base (frame_info) + (u->Total_frame_size << 3)
-		     + offset);
-	    }
-	}
-
-
-      /* GCC handles callee saved FP regs a little differently.  
-
-         It emits an instruction to put the value of the start of
-         the FP store area into %r1.  It then uses fstds,ma with
-         a basereg of %r1 for the stores.
-
-         HP CC emits them at the current stack pointer modifying
-         the stack pointer as it stores each register.  */
-
-      /* ldo X(%r3),%r1 or ldo X(%r30),%r1.  */
-      if ((inst & 0xffffc000) == 0x34610000
-	  || (inst & 0xffffc000) == 0x37c10000)
-	fp_loc = extract_14 (inst);
-
-      reg = inst_saves_fr (inst);
-      if (reg >= 12 && reg <= 21)
-	{
-	  /* Note +4 braindamage below is necessary because the FP status
-	     registers are internally 8 registers rather than the expected
-	     4 registers.  */
-	  save_fr &= ~(1 << reg);
-	  if (fp_loc == -1)
-	    {
-	      /* 1st HP CC FP register store.  After this instruction
-	         we've set enough state that the GCC and HPCC code are
-	         both handled in the same manner.  */
-	      frame_saved_regs[reg + FP4_REGNUM + 4] = get_frame_base (frame_info);
-	      fp_loc = 8;
-	    }
-	  else
-	    {
-	      frame_saved_regs[reg + FP0_REGNUM + 4]
-		= get_frame_base (frame_info) + fp_loc;
-	      fp_loc += 8;
-	    }
-	}
-
-      /* Quit if we hit any kind of branch the previous iteration. */
-      if (final_iteration)
-	break;
-
-      /* We want to look precisely one instruction beyond the branch
-	 if we have not found everything yet.  */
-      if (is_branch (inst))
-	final_iteration = 1;
-
-      /* Bump the PC.  */
-      pc += 4;
-    }
-}
-
-/* XXX - deprecated.  This is a compatibility function for targets
-   that do not yet implement DEPRECATED_FRAME_INIT_SAVED_REGS.  */
-/* Find the addresses in which registers are saved in FRAME.  */
-
-static void
-hppa_frame_init_saved_regs (struct frame_info *frame)
-{
-  if (deprecated_get_frame_saved_regs (frame) == NULL)
-    frame_saved_regs_zalloc (frame);
-  hppa_frame_find_saved_regs (frame, deprecated_get_frame_saved_regs (frame));
-}
-
 struct hppa_frame_cache
 {
   CORE_ADDR base;
@@ -5458,62 +3459,6 @@
   /* We can leave the tail's space the same, since there's no jump.  */
 }
 
-/* Same as hppa32_store_return_value(), but for the PA64 ABI.  */
-
-void
-hppa64_store_return_value (struct type *type, char *valbuf)
-{
-  if (TYPE_CODE (type) == TYPE_CODE_FLT)
-    deprecated_write_register_bytes
-      (DEPRECATED_REGISTER_BYTE (FP4_REGNUM)
-        + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
-       valbuf, TYPE_LENGTH (type));
-  else if (is_integral_type(type))
-    deprecated_write_register_bytes
-      (DEPRECATED_REGISTER_BYTE (28)
-        + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
-       valbuf, TYPE_LENGTH (type));
-  else if (TYPE_LENGTH (type) <= 8)
-    deprecated_write_register_bytes
-      (DEPRECATED_REGISTER_BYTE (28),valbuf, TYPE_LENGTH (type));
-  else if (TYPE_LENGTH (type) <= 16)
-    {
-      deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (28),valbuf, 8);
-      deprecated_write_register_bytes
-        (DEPRECATED_REGISTER_BYTE (29), valbuf + 8, TYPE_LENGTH (type) - 8);
-    }
-}
-
-/* Same as hppa32_extract_return_value but for the PA64 ABI case.  */
-
-void
-hppa64_extract_return_value (struct type *type, char *regbuf, char *valbuf)
-{
-  /* RM: Floats are returned in FR4R, doubles in FR4.
-         Integral values are in r28, padded on the left.
-         Aggregates less that 65 bits are in r28, right padded.
-         Aggregates upto 128 bits are in r28 and r29, right padded.  */ 
-  if (TYPE_CODE (type) == TYPE_CODE_FLT)
-    memcpy (valbuf,
-            regbuf + DEPRECATED_REGISTER_BYTE (FP4_REGNUM)
-             + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
-            TYPE_LENGTH (type));
-  else if (is_integral_type(type))
-    memcpy (valbuf,
-            regbuf + DEPRECATED_REGISTER_BYTE (28)
-             + DEPRECATED_REGISTER_SIZE - TYPE_LENGTH (type),
-            TYPE_LENGTH (type));
-  else if (TYPE_LENGTH (type) <= 8)
-    memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (28),
-	    TYPE_LENGTH (type));
-  else if (TYPE_LENGTH (type) <= 16)
-    {
-      memcpy (valbuf, regbuf + DEPRECATED_REGISTER_BYTE (28), 8);
-      memcpy (valbuf + 8, regbuf + DEPRECATED_REGISTER_BYTE (29),
-	      TYPE_LENGTH (type) - 8);
-    }
-}
-
 int
 hppa_reg_struct_has_addr (int gcc_p, struct type *type)
 {
@@ -5529,13 +3474,6 @@
   return (lhs > rhs);
 }
 
-CORE_ADDR
-hppa64_stack_align (CORE_ADDR sp)
-{
-  /* The PA64 ABI mandates a 16 byte stack alignment.  */
-  return ((sp % 16) ? (sp + 15) & -16 : sp);
-}
-
 int
 hppa_pc_requires_run_before_use (CORE_ADDR pc)
 {
@@ -5618,14 +3556,6 @@
      return builtin_type_double;
 }
 
-/* Store the address of the place in which to copy the structure the
-   subroutine will return.  This is called from call_function.  */
-
-void
-hppa_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
-{
-  write_register (28, addr);
-}
 /* Return True if REGNUM is not a register available to the user
    through ptrace().  */
 
Index: infcall.c
===================================================================
RCS file: /cvs/src/src/gdb/infcall.c,v
retrieving revision 1.39
diff -u -r1.39 infcall.c
--- infcall.c	23 Feb 2004 16:27:40 -0000	1.39
+++ infcall.c	7 Mar 2004 18:04:57 -0000
@@ -277,10 +277,6 @@
      (PUSH_DUMMY_BREAKPOINT?) should just do everything.  */
   if (!gdbarch_push_dummy_call_p (current_gdbarch))
     {
-#ifdef GDB_TARGET_IS_HPPA
-      (*real_pc) = DEPRECATED_FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs,
-					      args, value_type, using_gcc);
-#else
       if (DEPRECATED_FIX_CALL_DUMMY_P ())
 	{
 	  /* gdb_assert (CALL_DUMMY_LOCATION == ON_STACK) true?  */
@@ -288,7 +284,6 @@
 				     value_type, using_gcc);
 	}
       (*real_pc) = start_sp;
-#endif
     }
   /* Yes, the offset is applied to the real_pc and not the dummy addr.
      Ulgh!  Blame the HP/UX target.  */
Index: config/pa/tm-hppa.h
===================================================================
RCS file: /cvs/src/src/gdb/config/pa/tm-hppa.h,v
retrieving revision 1.63
diff -u -r1.63 tm-hppa.h
--- config/pa/tm-hppa.h	23 Feb 2004 00:06:40 -0000	1.63
+++ config/pa/tm-hppa.h	7 Mar 2004 18:05:03 -0000
@@ -26,9 +26,6 @@
 
 #include "regcache.h"
 
-/* Wonder if this is correct?  Should be using push_dummy_call().  */
-#define DEPRECATED_DUMMY_WRITE_SP(SP) deprecated_write_sp (SP)
-
 #define GDB_MULTI_ARCH 1
 
 /* Hack, get around problem with including "arch-utils.h".  */
@@ -107,101 +104,7 @@
 
 #define INSTRUCTION_SIZE 4
 
-/* This sequence of words is the instructions
-
-   ; Call stack frame has already been built by gdb. Since we could be calling 
-   ; a varargs function, and we do not have the benefit of a stub to put things in
-   ; the right place, we load the first 4 word of arguments into both the general
-   ; and fp registers.
-   call_dummy
-   ldw -36(sp), arg0
-   ldw -40(sp), arg1
-   ldw -44(sp), arg2
-   ldw -48(sp), arg3
-   ldo -36(sp), r1
-   fldws 0(0, r1), fr4
-   fldds -4(0, r1), fr5
-   fldws -8(0, r1), fr6
-   fldds -12(0, r1), fr7
-   ldil 0, r22                  ; FUNC_LDIL_OFFSET must point here
-   ldo 0(r22), r22                      ; FUNC_LDO_OFFSET must point here
-   ldsid (0,r22), r4
-   ldil 0, r1                   ; SR4EXPORT_LDIL_OFFSET must point here
-   ldo 0(r1), r1                        ; SR4EXPORT_LDO_OFFSET must point here
-   ldsid (0,r1), r20
-   combt,=,n r4, r20, text_space        ; If target is in data space, do a
-   ble 0(sr5, r22)                      ; "normal" procedure call
-   copy r31, r2
-   break 4, 8 
-   mtsp r21, sr0
-   ble,n 0(sr0, r22)
-   text_space                           ; Otherwise, go through _sr4export,
-   ble (sr4, r1)                        ; which will return back here.
-   stw r31,-24(r30)
-   break 4, 8
-   mtsp r21, sr0
-   ble,n 0(sr0, r22)
-   nop                          ; To avoid kernel bugs 
-   nop                          ; and keep the dummy 8 byte aligned
-
-   The dummy decides if the target is in text space or data space. If
-   it's in data space, there's no problem because the target can
-   return back to the dummy. However, if the target is in text space,
-   the dummy calls the secret, undocumented routine _sr4export, which
-   calls a function in text space and can return to any space. Instead
-   of including fake instructions to represent saved registers, we
-   know that the frame is associated with the call dummy and treat it
-   specially.
-
-   The trailing NOPs are needed to avoid a bug in HPUX, BSD and OSF1 
-   kernels.   If the memory at the location pointed to by the PC is
-   0xffffffff then a ptrace step call will fail (even if the instruction
-   is nullified).
-
-   The code to pop a dummy frame single steps three instructions
-   starting with the last mtsp.  This includes the nullified "instruction"
-   following the ble (which is uninitialized junk).  If the 
-   "instruction" following the last BLE is 0xffffffff, then the ptrace
-   will fail and the dummy frame is not correctly popped.
-
-   By placing a NOP in the delay slot of the BLE instruction we can be 
-   sure that we never try to execute a 0xffffffff instruction and
-   avoid the kernel bug.  The second NOP is needed to keep the call
-   dummy 8 byte aligned.  */
-
-#define CALL_DUMMY {0x4BDA3FB9, 0x4BD93FB1, 0x4BD83FA9, 0x4BD73FA1,\
-                    0x37C13FB9, 0x24201004, 0x2C391005, 0x24311006,\
-                    0x2C291007, 0x22C00000, 0x36D60000, 0x02C010A4,\
-                    0x20200000, 0x34210000, 0x002010b4, 0x82842022,\
-                    0xe6c06000, 0x081f0242, 0x00010004, 0x00151820,\
-                    0xe6c00002, 0xe4202000, 0x6bdf3fd1, 0x00010004,\
-                    0x00151820, 0xe6c00002, 0x08000240, 0x08000240}
-
 #define REG_PARM_STACK_SPACE 16
-
-/* If we've reached a trap instruction within the call dummy, then
-   we'll consider that to mean that we've reached the call dummy's
-   end after its successful completion. */
-#define DEPRECATED_CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
-  (DEPRECATED_PC_IN_CALL_DUMMY((pc), (sp), (frame_address)) && \
-   (read_memory_integer((pc), 4) == BREAKPOINT32))
-
-/* Insert the specified number of args and function address into a
-   call sequence of the above form stored at DUMMYNAME.
-
-   On the hppa we need to call the stack dummy through $$dyncall.
-   Therefore our version of DEPRECATED_FIX_CALL_DUMMY takes an extra
-   argument, real_pc, which is the location where gdb should start up
-   the inferior to do the function call.  */
-
-/* FIXME: brobecker 2002-12-26.  This macro is going to cause us some
-   problems before we can go to multiarch partial as it has been
-   diverted on HPUX to return the value of the PC!  */
-/* NOTE: cagney/2003-05-03: This has been replaced by push_dummy_code.
-   Hopefully that has all the parameters HP/UX needs.  */
-#define DEPRECATED_FIX_CALL_DUMMY hppa_fix_call_dummy
-extern CORE_ADDR hppa_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, int,
-		                      struct value **, struct type *, int);
 
 #define	GDB_TARGET_IS_HPPA
 
Index: config/pa/tm-hppa64.h
===================================================================
RCS file: /cvs/src/src/gdb/config/pa/tm-hppa64.h,v
retrieving revision 1.30
diff -u -r1.30 tm-hppa64.h
--- config/pa/tm-hppa64.h	14 Sep 2003 02:04:44 -0000	1.30
+++ config/pa/tm-hppa64.h	7 Mar 2004 18:05:03 -0000
@@ -57,52 +57,6 @@
 
 /* jimb: omitted dynamic linking stuff here */
 
-/* This sequence of words is the instructions
-
-; Call stack frame has already been built by gdb. Since we could be calling
-; a varargs function, and we do not have the benefit of a stub to put things in
-; the right place, we load the first 8 word of arguments into both the general
-; and fp registers.
-call_dummy
-	nop
-        copy %r4,%r29
-        copy %r5,%r22
-        copy %r6,%r27
-        fldd -64(0,%r29),%fr4
-        fldd -56(0,%r29),%fr5
-        fldd -48(0,%r29),%fr6
-        fldd -40(0,%r29),%fr7
-        fldd -32(0,%r29),%fr8
-        fldd -24(0,%r29),%fr9
-        fldd -16(0,%r29),%fr10
-        fldd -8(0,%r29),%fr11
-        copy %r22,%r1
-        ldd -64(%r29), %r26
-        ldd -56(%r29), %r25
-        ldd -48(%r29), %r24
-        ldd -40(%r29), %r23
-        ldd -32(%r29), %r22
-        ldd -24(%r29), %r21
-        ldd -16(%r29), %r20
-        bve,l (%r1),%r2
-        ldd -8(%r29), %r19
-        break 4, 8
-	mtsp %r21, %sr0
-	ble 0(%sr0, %r22)
-        nop
-*/
-
-/* Call dummys are sized and written out in word sized hunks.  So we have
-   to pack the instructions into words.  Ugh.  */
-#undef CALL_DUMMY
-#define CALL_DUMMY {0x08000240349d0000LL, 0x34b6000034db0000LL, \
-                    0x53a43f8353a53f93LL, 0x53a63fa353a73fb3LL,\
-                    0x53a83fc353a93fd3LL, 0x2fa1100a2fb1100bLL,\
-                    0x36c1000053ba3f81LL, 0x53b93f9153b83fa1LL,\
-                    0x53b73fb153b63fc1LL, 0x53b53fd10fa110d4LL,\
-                    0xe820f0000fb110d3LL, 0x0001000400151820LL,\
-                    0xe6c0000008000240LL}
-
 /* The PA64 ABI reserves 64 bytes of stack space for outgoing register
    parameters.  */
 #undef REG_PARM_STACK_SPACE

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]