This is the mail archive of the ecos-patches@sourceware.org mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

AT91-USB EP0 enable with slaves

From: Andrew Lunn <andrew at lunn dot ch>
To: eCos Patches <ecos-patches at ecos dot sourceware dot org>
Date: Tue, 6 Jun 2006 15:34:04 +0200
Subject: AT91-USB EP0 enable with slaves

Hi Folks

I little patch for the AT91 USB driver. It was not possible to
configure the driver for use /dev/ entries unless you had a slave
client enabled. This is wrong. The patch fix this.

       Andrew

Attachment: at91_no_slaves.diff
Description: Text document

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]