This is the mail archive of the
ecos-patches@sourceware.org
mailing list for the eCos project.
Re: MPC8xx SMC serial fix
- From: Gary Thomas <gary at mlbassoc dot com>
- To: Will Wagner <will_wagner at carallon dot com>
- Cc: eCos patches <ecos-patches at ecos dot sourceware dot org>
- Date: Mon, 30 Jan 2006 16:29:50 -0700
- Subject: Re: MPC8xx SMC serial fix
- Organization: MLB Associates
- References: <43DA57AD.6090209@carallon.com>
On Fri, 2006-01-27 at 17:26 +0000, Will Wagner wrote:
> Attached patch fixes errors with SMC config on an 866. If you tried to
> use the SMC in any setting other than 8, none, 1 the CLEN field in SMCMR
> was set incorrectly.
>
> Also added the beginnings of some basic error detection when the SMC
> reports a frame or parity error.
>
> Tested on MPC866P hardware, all serial combinations with even/odd
> parity, 1 or 2 stop bits, 7 or 8 data bits (had no hardware to test 5 & 6).
>
Applied, thanks (indentation slightly reformatted)
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------