This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
AW: Fwd: New features required on Cortex-M platform
- From: "Richard Rauch" <rrauch at itrgmbh dot de>
- To: "'Jerzy Dyrda'" <jerzdy at gmail dot com>, "'eCos Discussion'" <ecos-discuss at ecos dot sourceware dot org>
- Date: Fri, 13 Jun 2014 17:33:39 +0200
- Subject: AW: Fwd: New features required on Cortex-M platform
- Authentication-results: sourceware.org; auth=none
- References: <5752197 dot rmWza1iyYx at inteldesktop dot site>
> Von: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-
> owner@ecos.sourceware.org] Im Auftrag von Jerzy Dyrda
> Gesendet: Freitag, 13. Juni 2014 17:15
> An: eCos Discussion
> Betreff: [ECOS] Fwd: New features required on Cortex-M platform
>
> Hello all,
>
> During developing some application on Cortex-M controller I realized that
is
> missing some vital components in current version of eCos system (from my
> point of view) i.e :
>
> 1) HTTP server - AHTTPD doesn't support lwIP stack what causes that it's
> useless.
> I'm planing to modify it thus any kind of advises are welcome.
>
> 2) Small embedded GUI working directly on display. From my side I propose
> uGFX -> http://ugfx.org/ License seems to be compatible and due its nature
> porting on new platform shouldn't be complicated even for me :) I'm also
> planning to add support and again any kind of comments advices or warnings
> are expecting.
>
> 3) SD bus support. I know that I can use SD card in SPI mode but on some
board
> like STM32F4DISCOVERY SD card i only available on SD bus.
> It's high time to add this miss part of system.
>
> Best regards,
> jerzy
>
A few comments and questions from my side:
- what is the advantage of uGFX? Are there applications available, which are
based on uGFX? What do you think about support for QT (
http://qt-project.org/ )?
- SD card interface. Unfortunately this is very processor specific. Each
Microcontroller has its own IP for accessing SD card. We have made it e.g.
for Xilinx Zynq
(http://tiprom.itrgmbh.com/projects/ecos-on-zynq/wiki/ECosOnZynq-Wiki ), but
I assume it is not re-usable for other platforms!
Best Regards
Richard
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss