This is the mail archive of the ecos-discuss@sourceware.org mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Problem executing anything on IXP425 based board, redboot is the bootloader


Ihave a board with total RAM of 32 MB, 2 chips of 16  MB each. It has
8 MB flash.
It has redboot bootloader and platform is IXP425 processor

Booting is fine. I am able to load the program fine to memory but
executing gives me an error grabage output on serial output after
executing go or exec command like this
"$T050f:01000000;0d:01fc0fec;#d6". I think memory/interrupt of
the board is bad. How to test RAM.

If suppose RAM is bad. Is it possible to modify redboot and burn it again and
then use only 16MB RAM.If yes how to do that or how to troubleshoot.

Thanks

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]