This is the mail archive of the
mailing list for the eCos project.
eCos xscale problem
- From: Saurabh Kadekodi <saurabhkadekodi at gmail dot com>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 4 Aug 2009 17:23:09 +0530
- Subject: [ECOS] eCos xscale problem
I am running redboot on a board called eurotech titan which has intel
pxa270 xscale arm processor. The ethernet controller that I have is
For running it successfully I have had to increase the chip select
timings (CS) and thus modify MSC0 register (meant for ethernet).
I have done the modification in :
(base directory being that of ecos)
as that is the only place where MSC register settings can be modified for titan.
Unfortunately on building redboot; that file isn't recompiled at all.
Thus the value of the register MSC0 remains same after booting.
I would be glad if someone could assist me in this problem.
Thanks and Regards,
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss