This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
RE: Configtool setting for a prebuilt gnu toolchain
- From: "Sangeeta Ghangam" <sghangam at marvell dot com>
- To: "Chris Zimman" <czimman at bloomberg dot com>, <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 15 May 2008 09:33:29 -0700
- Subject: RE: [ECOS] Configtool setting for a prebuilt gnu toolchain
I was not aware of that, my target has a cortex core , where can I get the patches for EABI ?...I am assuming here that the patches is for the target and not ecos
-----Original Message-----
From: Chris Zimman [mailto:czimman@bloomberg.com]
Sent: Thursday, May 15, 2008 9:30 AM
To: Sangeeta Ghangam; ecos-discuss@sources.redhat.com
Subject: RE: [ECOS] Configtool setting for a prebuilt gnu toolchain
You are aware that without patches, EABI will not work, right?
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Sangeeta Ghangam
Sent: Thursday, May 15, 2008 5:15 PM
To: ecos-discuss@sources.redhat.com
Subject: [ECOS] Configtool setting for a prebuilt gnu toolchain
Hello;
I am using a prebuilt gnu toolchain for arm , based on gcc4.2.3, I downloaded
it from codesourcery.com ( for general arm-eabi target, and the tools are
running on a windows host). This toolchain is not dependent on cygwin, I set
the path in the configtool as C:\armtools\bin. Codesourcery? suggested using
cygpath for conversion, even though I set the correct variables, the .deps
file that gets generated during build calls the std library routines as
'C:\armtools\bin../lib/gcc/4.2.3/include/stddef.h' instead of
'/ecos-c/armtools/bin../lib/gcc/4.2.3/include/stddef.h', as a result I get an
error saying 'Multiple target pattern error' which indicates to the former
line. Please let me know of any way to convert the windows path to the posix
path, is there any setting that I am missing?
Thanks
Sangeeta
Sangeeta Ghangam
SoC -Virtual Platform Modeling Group
MARVELL SEMICONDUCTOR INC.
Chandler, AZ.
phone: (480)612-9708
email: sghangam@marvell.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss