This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: What functions should I call in ethernet drv ?
Hello Gary and others,
Sorry I missed 10/16/2007 20:08 mail,
I will prepare tar file and send you soon.
Before that,
Some points became cleared and also arose other question
and I rely on your suggestion.
I think the trouble is not my amendment or coding,rather how I 'use' eCos
application.
Let me explain.
I debugged on the next premise.
[premise]
There are no assingments to function
pointers(e.g.ng_ether_attach_p,ng_ether_input_p) in coding,
so their inside values(=function addresses) are settled at the time of
loading binary into RAM.
They are initially defined in
\packages\net\bsd_tcpip\current\include\sys\param.h like next
#define ng_ether_attach_p cyg_ng_ether_attach_p
.
On the above premise I decided to check on sampled
Hitachi SE77x9 Template that I used as protocol to develop my target
template.
Source is CVS current version ,so it must work correctly.
I just only amended memory layout as same as my target template.
I built 'RAM' Start Mode and linked to nc_test_slave test.
I loaded elf file on RAM using ICE,and dumped memory addresses.
Result was just as same as my template.
--from memory map
COMMON 0x000000008c0c0208 0x18
/ecos-c/cygwin/home/LINK/ecoscvs_se-net-SE7709-2/untitled_install/lib/libtarget.a(net_bsd_tcpip_if_ethersubr.o)
0x0 (size before relaxing)
0x000000008c0c0208 _cyg_ng_ether_input_p
0x000000008c0c020c _cyg_ng_ether_detach_p
0x000000008c0c0210
_sysctl__net_link_ether_children
0x000000008c0c0214 _cyg_ng_ether_attach_p
0x000000008c0c0218 _cyg_ng_ether_output_p
0x000000008c0c021c
_cyg_ng_ether_input_orphan_p
COMMON 0x000000008c0c0220 0xe8
/ecos-c/cygwin/home/LINK/ecoscvs_se-net-SE7709-2/untitled_install/lib/libtarget.a(net_bsd_tcpip_if_loop.o)
and memory dump after loading.
URAM 8C0C0214 cyg_ng_ether_attach_p 00 00 00 00 00 00 00 00
........
URAM 8C0C021C cyg_ng_ether_input_orphan_p 00 00 00 00 00 00 00 00
........
URAM 8C0C0224 cyg_loif+4 00 00 00 00 00 00 00 00
........
URAM 8C0C022C cyg_loif+c 00 00 00 00 00 00 00 00
........
URAM 8C0C0234 cyg_loif+14 00 00 00 00 00 00 00 00
........
URAM 8C0C023C cyg_loif+1c 00 00 00 00 00 00 00 00
........
URAM 8C0C0244 cyg_loif+24 00 00 00 00 00 00 00 00
........
URAM 8C0C024C cyg_loif+2c 00 00 00 00 00 00 00 00
........
URAM 8C0C0254 cyg_loif+34 00 00 00 00 00 00 00 00
........
URAM 8C0C025C cyg_loif+3c 00 00 00 00 00 00 00 00
........
URAM 8C0C0264 cyg_loif+44 00 00 00 00 00 00 00 00
........
URAM 8C0C026C cyg_loif+4c 00 00 00 00 00 00 00 00
........
URAM 8C0C0274 cyg_loif+54 00 00 00 00 00 00 00 00
........
URAM 8C0C027C cyg_loif+5c 00 00 00 00 00 00 00 00
........
I put on my target's memory layout files.
\packages\hal\sh\inserter\current\include\pkgconf\mlt_sh_sh77x9_inserter_ram.ldi
--- begin
#include <cyg/infra/cyg_type.inc>
MEMORY
{
ram : ORIGIN = 0x8c000000, LENGTH = 0x4000000
}
SECTIONS
{
SECTIONS_BEGIN
SECTION_vectors (ram, 0x8c010000, LMA_EQ_VMA)
SECTION_text (ram, ALIGN (0x4), LMA_EQ_VMA)
SECTION_fini (ram, ALIGN (0x4), LMA_EQ_VMA)
SECTION_rodata1 (ram, ALIGN (0x8), LMA_EQ_VMA)
SECTION_rodata (ram, ALIGN (0x8), LMA_EQ_VMA)
SECTION_fixup (ram, ALIGN (0x4), LMA_EQ_VMA)
SECTION_gcc_except_table (ram, ALIGN (0x1), LMA_EQ_VMA)
SECTION_data (ram, ALIGN (0x8), LMA_EQ_VMA)
SECTION_bss (ram, ALIGN (0x10), LMA_EQ_VMA)
CYG_LABEL_DEFN(__heap1) = ALIGN (0x8);
SECTIONS_END
}
--- end
\packages\hal\sh\inserter\current\include\pkgconf\mlt_sh_sh77x9_inserter_ram.h
--- begin
#ifndef __ASSEMBLER__
#include <cyg/infra/cyg_type.h>
#include <stddef.h>
#endif
#define CYGMEM_REGION_ram (0x8c000000)
#define CYGMEM_REGION_ram_SIZE (0x4000000)
#define CYGMEM_REGION_ram_ATTR (CYGMEM_REGION_ATTR_R | CYGMEM_REGION_ATTR_W)
#ifndef __ASSEMBLER__
extern char CYG_LABEL_NAME (__heap1) [];
#endif
#define CYGMEM_SECTION_heap1 (CYG_LABEL_NAME (__heap1))
#define CYGMEM_SECTION_heap1_SIZE (0x90000000 - (size_t) CYG_LABEL_NAME
(__heap1))
#ifndef __ASSEMBLER__
extern char CYG_LABEL_NAME (__pci_window) [];
#endif
--- end
and application makefile
--- begin
export PREFIX :=
/ecos-c/cygwin/home/LINK/ecoscvs_l_net_20071015/unnamed2_install
export COMMAND_PREFIX := sh-elf-
export CC := $(COMMAND_PREFIX)gcc
export OBJCOPY := $(COMMAND_PREFIX)objcopy
export HOST := CYGWIN
export AR := $(COMMAND_PREFIX)ar
XCC = sh-elf-gcc
## Build flags.
CFLAGS = -g -Wall -I$(PREFIX)/include -ffunction-sections -fdata-sections
LDFLAGS
= -nostartfiles -L$(PREFIX)/lib -Wl,--gc-sections -Wl,--Map -Wl,nc_test_slave.map
LIBS = -Ttarget.ld -nostdlib
LD = $(XCC)
## Build rules.
all: nc_test_slave
nc_test_slave.o: nc_test_slave.c
$(XCC) -c -o $*.o $(CFLAGS) $<
nc_test_slave: nc_test_slave.o
$(LD) $(LDFLAGS) -o $@ $@.o $(LIBS)
clean:
-rm -f nc_test_slave.exe nc_test_slave.o nc_test_slave.map
--- end
From above result I suppose I must do 'something' to make LAN91C111 driver
work,
or my environments lack somthing ?
If you could elicit any conclusion from above accounts
please enligten me.
I look foward to any suggestion.
Thank you in advance.
Sincerely,
Masahiro Ariga
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss