This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: PowerPC FEC doesn't ping
On 7/27/07, Tales Toledo <toledo.tales@gmail.com> wrote:
> Hi,
>
> is there some additional special cdl_option for FEC?
>
> I can get ** FEC Info: PHY LINK already UP \n message from redboot
> boot, configure ip_addresses, but I can get a reply from host or even
> reply its requests because FEC can't send packages (I have checked
> with wireshark).
I also check TXD0 close to phy with an oscilloscope and seems that
PowerPC FEC (hw is fine because it works with another sw) doesn't
transmit any package.
I can see the debug messages at redboot console
RedBoot> ping -h 192.168.1.100
Ethernet send:
0000545C: FF FF FF FF FF FF 7C 71 43 A6 7C 92 08 06 |......|qC.|... |
Ethernet send:
0000545C: FF FF FF FF FF FF 7C 71 43 A6 7C 92 08 06 |......|qC.|... |
Ethernet send:
0000545C: FF FF FF FF FF FF 7C 71 43 A6 7C 92 08 06 |......|qC.|... |
Is there some low level debug for FEC driver to address this issue?
>
> Thx,
> TT
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss