This is the mail archive of the
ecos-discuss@sourceware.org
mailing list for the eCos project.
Re: running ecos 2.0 on Excalibur
- From: Fernando Herrera <fherrera at teisa dot unican dot es>
- To: ecos-discuss at sources dot redhat dot com
- Date: Tue, 28 Feb 2006 14:22:02 +0100
- Subject: Re: [ECOS] running ecos 2.0 on Excalibur
- References: <43FD9A51.6050103@teisa.unican.es> <43FF37D1.1070004@moonman.me.uk>
Warwick Brown wrote:
Fernando Herrera wrote:
Hi,
I am trying to run eCos 2.0 example applications over excalibur EPXA1.
I made a default configuration and compiled the examples to generate
the .elf file. I tried to load and run it through the arm-elf-gdb
provided
with the arm gnu pre-compiled toolchain provided in the ecos site.
This was
in a Linux PC.
I connect arm-elf-gdb remotely to the gdbstub aplication running on a
Windows PC. This PC is connected through the Byteblaster II cable to the
Excalibur. It seems that the elf file loads right, but when I run
it, i obtain
swi 0x50 error appearing at the hyperterminal. It is a problem with this
arm-elf -gdb? (The configuration of the stripe that I use is that by
default with the getting started example).
I have read the past posts, but it did not gave me clues enough to
solve this.
If somebody already ran eCos on excalibur board, is there some tricky
points to keep into account (maybe variables to modify, memory map,
compilation swichtes, toolchain versions,...)
Thanks in advance for your help
regards!
Hi Fernando,
I saw from your post to the eCos mailing lists that you are trying to
get eCos working on the Altera EPXA1 board. I am also doing this but
am yet to get the machine to boot. Could I ask you how far you have
got in terms of running eCos and redboot on the board, and how you did
it, eg. did you use Quang Huang's patch (
http://sources.redhat.com/ml/ecos-patches/2003-07/msg00060.html ) or
did you make the port from scratch?
Hi again Warwick!
I tried to install this package but i got a window with the next message:
"Command Execution Error:
Invalid argument and "
Any idea?
Thanks in advance again!
kind regards
I am using the patch, which was against the cvs source tree as of
around february 2003, and am currently stuck with my programs being
loaded at 0x40000h, rather than at 0x0h. Any information you could
give would be greatly appreciated, and likewise if I can answer any of
your questions, i'd be happy to help.
Kind regards,
Warwick Brown
--
-----------------------------------------------------
Fernando Herrera
Microelectronics Engineering Group
E.T.S.I.Industriales y Telecom. TEISA Dpt.
University of Cantabria
Avda. Los Castros s/n, 39005
Santander, Spain
fherrera@teisa.unican.es
Tel. +34 942 200878
Fax. +34 942 201873
-----------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss