This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: ethernet initialization error
On Thu, 2005-04-07 at 11:44 +0100, Gonçalo Antunes wrote:
> Hello!
>
> I'm doing some tests with my eCos application that will run with network
> support on a i386 pc with a Realtek PCI network adapter.
> I've added the FreeBSD network stack and configured the Eth0 settings.
> When trying to get up the init_all_network_interfaces I get the following
> error.
> Can you help?
>
>
> BOOTP[eth0] op: REPLY
> >> htype: Ethernet
> >> hlen: 6
> >> hops: 0
> >> xid: 0x0
> >> secs: 0
> >> flags: 0x0
> >> hw_addr: ff:ff:ff:ff:ff:ff
> >> client IP: 192.168.0.200
> >> my IP: 192.168.0.200
> >> server IP: 192.168.0.1
> >> gateway IP: 192.168.0.1
> >>
> >> options:
> >> subnet mask: 255.255.255.0
> >> IP broadcast: 192.168.0.255
> >> gateway: 192.168.0.1
> >> SIOCIFADDR: Device not configured
> >> Network initialization failed for eth0
You've not told us enough to be able to comment.
How did you configure your system to achieve these settings?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss