This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: cannot input under C-kermit


Hi, Andrew

I can input now by your advice. Thank you very much.

Xiangxian

----- Original Message ----- From: "Andrew Lunn" <andrew@lunn.ch>
To: "xxchen" <xxchen@spherenet.co.jp>
Cc: "eCos Disuss" <ecos-discuss@ecos.sourceware.org>
Sent: Friday, January 07, 2005 5:37 PM
Subject: Re: [ECOS] cannot input under C-kermit



On Fri, Jan 07, 2005 at 10:54:57AM +0900, xxchen wrote:
I have porting redboot into my board. By Termpro under windows-xp, when I
boot my board, I get redboot output message on termpro. I can also input
command on prompt.
But when I change the host to linux (red-hat 9.0), and then use C-kermit as
a console, I can get redboot output message, but I cannnot input anything
on prompt.
The setting of kermit is following:


$kermit
$set line /dev/ttyS0
$set carrier-watch off
$set speed 38400
$c

should I do any further setting for kermit? should I do any further porting
to my redboot? Could you please give me any advice?

Try disabling flow control.


Andrew






-- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]