This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Debug terminal port selection
- From: Tzahi <tzahi at terasync dot net>
- To: Posting To <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 02 Dec 2004 13:52:59 +0200
- Subject: [ECOS] Debug terminal port selection
Hi all
I'm using A&M's AdderII (MPC852T) board.
I've seen that the selection of the debug port (SMC1 or SCC3) is dependent
of user inputs durng startup.
Does anyone know how can I inactivate this option so the debug port
(printf's) would always be SMC1?
Best regards
=========================================
Tzahi Manistersky mailto:tzahi@terasync.net
Software Engineer
TeraSync LTD. http://www.terasync.net/
Tel: +972(3)5360202 ext:1222 Fax: +972(3)5360020
9 Altalef St., Industrial Zone - Yehud
P.O.Box. 160, Yehud, 56000 Israel
=========================================
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss