This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: does not support interworking, whereas main does
- From: Jesper Jensen <jjen01 at kom dot auc dot dk>
- To: Andrew Lunn <andrew at lunn dot ch>
- Cc: eCos Discussion <ecos-discuss at ecos dot sourceware dot org>
- Date: Thu, 18 Nov 2004 12:04:43 +0100
- Subject: Re: [ECOS] does not support interworking, whereas main does
- References: <419C74CD.5000202@kom.auc.dk> <20041118110032.GF2180@lunn.ch>
Thanks for the respons!
You are right! It was some wrong thumb interworking settings in the new
ecos configuration.
Andrew Lunn wrote:
-L/home/jjen01/master/code/atmel/939/ecos-rom/install/lib -Ttarget.ld
-nostdlib
/opt/ecos/gnutools/arm-elf/bin/../lib/gcc-lib/arm-elf/3.2.1/../../../../arm-elf/bin/ld:
Warning: table.o does not support interworking, whereas table does
Probably something to do with thumb interworking. Check you build both
eCos and your application software with the same thumb interworking
options.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss