This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: delete from fis directory
- From: "David Lewin" <david dot lewin at europe-technologies dot com>
- To: <fazio at planetek dot it>, <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 29 Jul 2004 11:59:30 +0200
- Subject: Re: [ECOS] delete from fis directory
- References: <4108E1F1.4744.7EE5A8@localhost>
Did I understood well :
- you need to update the new config by erasing the old.
- the old is in use
A solution could be to load the application executed in flash in RAM, just
during the update time.
----- Original Message -----
From: <fazio@planetek.it>
To: "David Lewin" <david.lewin@europe-technologies.com>;
<ecos-discuss@sources.redhat.com>
Sent: Thursday, July 29, 2004 11:39 AM
Subject: Re: [ECOS] delete from fis directory
> Thanks for your reply,
> My platform is a nec v850.
> I wrote a server application able to listen for a connection from a client
that can send
> a file to upload on the board. After receiving the file and copying it in
flash and
> changing the fconfig, it reboots the platform executing the new
application that must
> delete the old.
> It can delete the flash, but when it has to delete the image from fis
directory, the
> flash_program gives an error ("Driver timed out waiting for device").
> My problem is: I would to delete the piece of fis directory containing the
old apllication
> info (flash_base, lenght, checksum,...) but I'm executing another
application in the
> flash.
> I cannot erase the fis dir block because I'm executing another
application, so how can
> I delete only a piece of the fis dir?
> Thanks
>
> On 29 Jul 2004 at 11:24, David Lewin wrote:
>
> > >From my point of view , an Atmel-like flash I mean,
> > you can't as the minimum is a sector (or a block for some others)
> >
> > What is your device ?
> > Why doing so ? even if you could, I'm not sure that you'll gain some
time or
> > lifecycle
> >
> >
> > ----- Original Message -----
> > From: <fazio@planetek.it>
> > To: <ecos-discuss@sources.redhat.com>
> > Sent: Thursday, July 29, 2004 10:58 AM
> > Subject: [ECOS] delete from fis directory
> >
> >
> > > Hi,
> > > it is possible to delete an image from fis directory using only
> > > flash_program to set the image to 0xff without erasing the entire
> > > block with flash_erase?
> > > Thanks
> > >
> > > --
> > > Before posting, please read the FAQ:
http://ecos.sourceware.org/fom/ecos
> > > and search the list archive:
http://ecos.sourceware.org/ml/ecos-discuss
> >
> >
> > --
> > Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> > and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss