This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: IXDP425 Redboot error code


Hi again,

I have found that in h'0080 0000 is not RedBoot who is running. It is Win CE
Boot Loader who waits for a tftp conection.
But in h'0000 0000 (redboot ROM flash address), nothing happens.

As WinCE BootLoader works, I must deduce the IXP425 processor's screws are
ok. So i can't figure what is happening.

Thanks

Alex

> -----Mensaje original-----
> De:	Bastos Fernandez  Alexandre 
> Enviado el:	jueves, 13 de mayo de 2004 14:48
> Para:	'ecos-discuss@sources.redhat.com'
> Asunto:	IXDP425 Redboot error code
> 
> Hi,
> 
> I have connected my PC to the IXDP425 Board and I have configured minicom
> as it is showed in the Quick start guide, and i have powered-on the
> supply.
> Booting from h'0000 0000 nothings happens in the terminal, and the hex
> leds stands 0000. I have tried to push a little the processor, as in a
> previous mail in this list, but i doesn't work. Any other idea?
> 
> I have then tried to boot from h'0080 0000 an then the leds show the
> sequence: 0009 - 000A - 0010 and then stops. Here the serial terminal
> receives no-sense values.
> 
> Have anyone idea of what could be happening?  What means the code 0010?
> 
> Thanks
> 
> Alex Bastos

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]