This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
RE: Problem opening second serial port on EB40A
- From: "Sidharth Jandhyala" <sidharth at clarinox dot com>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Thu, 4 Mar 2004 11:36:24 +1100
- Subject: RE: [ECOS] Problem opening second serial port on EB40A
- Organization: Clarinox Pty Ltd
- Reply-to: <sidharth at clarinox dot com>
Thanks Andrew. Its working now.
Regards,
Sidharth
> -----Original Message-----
> From: Andrew Lunn [mailto:andrew@lunn.ch]
> Sent: Tuesday, 2 March 2004 7:14 PM
> To: Sidharth Jandhyala
> Cc: ecos-discuss@sources.redhat.com
> Subject: Re: [ECOS] Problem opening second serial port on EB40A
>
> On Tue, Mar 02, 2004 at 03:33:22PM +1100, Sidharth Jandhyala wrote:
> > Hello,
> > When I run the program I see the message "serial A is working
> > correctly" on the console and all the LEDs flash on and
> off. However,
> > I see no message of any kind in hyperterminal.
> >
> >
> >
> > Debugging reveals that errB = -2 ("No such entity" as described by
> > codes.h").
>
> Have you enabled
>
> CYGPKG_IO_SERIAL_DEVICES
>
> Without this the serial drivers will not be compiled.
>
> Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss