This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: gdb:stepi/continue problem
- From: Yoshinori Sato <ysato at users dot sourceforge dot jp>
- To: Heiko Panther <heiko dot panther at web dot de>
- Cc: ecos-discuss at sources dot redhat dot com
- Date: Thu, 15 Jan 2004 17:59:30 +0900
- Subject: Re: [ECOS] gdb:stepi/continue problem
- References: <1073527115.14448.ezmlm@sources.redhat.com><400149B7.1080009@web.de>
At Sun, 11 Jan 2004 14:03:51 +0100,
Heiko Panther wrote:
>
> Yoshinorisan,
>
> >>$ h8300-elf-gdb -nw a.out
> >>(gdb) set remotebaud 38400
> >>(gdb) target remote /dev/ttyS0
> >>Remote debugging using /dev/ttyS0
> >>0x000060f2 in ?? ()
> >>(gdb) load
> >>Loading section .text, size 0xfbaa lma 0x204000
> >>Loading section .rodata, size 0x985 lma 0x213baa
> >>Loading section .data, size 0x6e0 lma 0x214530
> >>Loading section .int_hook_table, size 0x100 lma 0x214c10
> >>Start address 0x204000, load size 68879
> >>Transfer rate: 17219 bits/sec, 63 bytes/write.
> >>(gdb) stepi
> >>
> >>
> >>Nothing is displayed. It is same for "continue" also. What might be
> >>the problem?
>
> > There is the problem that some instruction cannot trace normally.
> > It is signed off, but cannot prepare a patch.
>
> sorry, i don't understand that. Could you explain the last sentece more,
> and where I would have to look to fix the problem?
>
Please test this patch.
http://ysato.dip.jp/~ysato/h8300hal.diff.gz
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss