This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
EDOSK2674 serial tests
- From: "Uwe Kindler" <ukindler at htwm dot de>
- To: <ecos-discuss at sources dot redhat dot com>
- Date: Wed, 5 Nov 2003 09:18:22 +0100
- Subject: [ECOS] EDOSK2674 serial tests
Hello,
i finished serial driver development for the the new EDOSK2674 board and
would like to know
if I have to change somethin within ser_test_protocol.inl in order to run
the serial tests on the
EDOSK2674 board. And do I have to care about the device name if I would like
to run the serial
tests? At the moment I use"/dev/ser2".
At the moment i get the following results:
serial1 - works fine
serial2 - works fine only if ser_filter is used (but should work without
filter according to documentation)
serial3 - "NOT APPLICABLE: no host side harness dectect"
So do I have do change something in ser_test_protocol.inl or do I have to
use a special device name?
Best Regards, Uwe
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss