This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Video mode code / eCos demo
- From: "Kumanan" <kumanan at mindless dot com>
- To: "David N. Welton" <davidw at dedasys dot com>
- Cc: <ecos-discuss at sources dot redhat dot com>
- Date: Sat, 23 Aug 2003 20:52:54 -0400
- Subject: Re: [ECOS] Video mode code / eCos demo
- References: <87he4rapd9.fsf@dedasys.com> <m37k5keblb.fsf@miso.calivar.com><87llu01dka.fsf@dedasys.com> <005001c36017$94a9dbe0$302aa8c0@Kummuter> <871xvsyx7z.fsf@dedasys.com>
Hello,
So, I found the gfxmode.c test app and ran it after telling RedBoot to use
video mode 0x110 (not that that should matter).
Here's the output I got, which leads to suspect that either I messed
something up, or the board does not support VBE for VESA mode setting. Can
someone clarify for me?
(For those who care, I am trying to work with a STB3036N from GCT Allwell
technologies, which is a Geode x86 platform using the TVIA CyberPro 5005
chip for graphics & video.)
-----8<----------
RedBoot> load -v -m yMODEM
CCEntry point: 0x00108000, address range: 0x00108000-0x001201e0
xyzModem - CRC mode, 2(SOH)/278(STX)/0(CAN) packets, 5 retries
RedBoot> go
VESA info:
version ffff
OEM Òç
total memory 4194240K
oem software rev ffff
OEM vendor Òç
OEM product name Òç
OEM product revision Òç
Capabilities: ff, ff, ff, ff
$T0bthread:00000002;08:dc861000;04:843d1200;#c7
--------------------------
Regards,
Kumanan
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss