This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: Building Error in Redboot (Samsung SNDS)
The problem is with the Redboot command used to boot linux. Assuming
you don't want to do this, you can disable this command. Disable the
option
CYGBLD_BUILD_REDBOOT_WITH_EXEC
and it should at least get past that problem.
Andrew
On Mon, Sep 23, 2002 at 06:25:51PM +0800, Y. P. Yen wrote:
> Dear Andrew,
>
> Yes, I had imported these two files, but the result is the same, do you have
> any idea about this?
> thank you for your help again, thank you.
>
> ----- Original Message -----
> From: "Andrew Lunn" <andrew.lunn@ascom.ch>
> To: "Y. P. Yen" <yp@mis.mgt.ncu.edu.tw>
> Cc: <ecos-discuss@sources.redhat.com>
> Sent: Monday, September 23, 2002 5:16 PM
> Subject: Re: [ECOS] Building Error in Redboot (Samsung SNDS)
>
>
> > On Mon, Sep 23, 2002 at 04:56:59PM +0800, Y. P. Yen wrote:
> > > Hello all,
> > >
> > > When I build the Redboot with configure tool 2.11, select template as
> > > Samsung SNDS target,
> > > I had the following error message :
> > >
> > >
> /ecos-c/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src/redboot_lin
> > > ux_exec.c:75:3: #error
> >
> > Did you remember to import the redboot .ecm file from
> > packages/hal/arm/snds/current/misc/redboot_ROM.ecm or
> > packages/hal/arm/snds/current/misc/redboot_RAM.ecm?
> >
> > Andrew
> >
> > --
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss