This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]
Other format:	[Raw text]

Re: gdb over Ethernet

From: Gary Thomas <gthomas at redhat dot com>
To: Ecos Temp <ecos1 at sorensontech dot com>
Cc: "Ecos-List (E-mail)" <ecos-discuss at sources dot redhat dot com>
Date: 14 Apr 2002 05:43:18 -0600
Subject: Re: [ECOS] gdb over Ethernet
References: <6E031E06378BD311AEF20090273CE1BAF69D31@el-postino.s-vision.com>

On Fri, 2002-04-12 at 16:52, Ecos Temp wrote:
> 
> All,
> 
> if I connect gdb over the ethernet port and set a break point and once the
> break point is reached the gdb output goes to the serial port why is this
> so?

What are you using for the GDB stubs?  

RedBoot does not behave like this, so I'd suspect that you might 
investigate using RedBoot on your target.


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

References:
- gdb over Ethernet
  - From: Ecos Temp

Index Nav:	[Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav:	[Date Prev] [Date Next]	[Thread Prev] [Thread Next]