This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: problem with i-paq h3870 redboot install
- From: Gary Thomas <gthomas at redhat dot com>
- To: hopeful <Jared dot W dot Alessandroni at Dartmouth dot EDU>
- Cc: eCos Discussion <ecos-discuss at sources dot redhat dot com>,ecos-maintainers at redhat dot com
- Date: 24 Mar 2002 12:53:26 -0700
- Subject: Re: [ECOS] problem with i-paq h3870 redboot install
- References: <57246478@vixen.Dartmouth.EDU>
On Sun, 2002-03-24 at 12:32, Jared W. Alessandroni wrote:
> It loads the ram Red-boot, flashes some lines I can't read for a second, and then goes to calibrate, but even when I catch it, the calibrate mode only stays for a second [the keyboard stays on the screen] and then I get
>
> FLASH: 0x00000000 - 0x52000000
> FLASH configuration checksum e [this is the end of the screen]
This is just a warning which you can ignore for now.
> ... waiting for network card:
>
> RedBoot(tm) bootstrap and debu
>
> Platform: Compaq Ipaq Pocket P
> Copyright (C) 2000, 2001, Red
>
> RAM: 0x00000000-0x02000000, 0x
> RedBoot> [non-blinking cursor]
>
> [The redboot and ecos logos are on the bottom, the keyboard is above them, and neither the terminal, the keys [including scroll] nor the touch-screen are responsive.
>
> I've tried this many times, even flashing the system, reinstalling the bin and the OSLoader, and trying to catch the calibrate mode before it flashed off.
>
> Any recommendations?
> I'm really excited about getting RedHat on here!
What version of RedBoot have you installed? Where did you get it?
You should be able to connect via a serial port at this point at
38400/8N1. Have you tried that?
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss