This is the mail archive of the
ecos-discuss@sources.redhat.com
mailing list for the eCos project.
Re: CDL configuration question]
- From: surya prakash <suryaprakash at multitech dot co dot in>
- To: Ecos-Discuss <ecos-discuss at sources dot redhat dot com>
- Date: Fri, 07 Dec 2001 18:52:11 +0530
- Subject: Re: [ECOS] CDL configuration question]
- Organization: MTSS
- References: <3C1048C4.5C5D5193@multitech.co.in>
> ------------------------------------------------------------------------
>
> > I have a doubt regarding the CDL configuration options.
> > The background is this. We are trying to port Redboot to MC68360 (QUICC)
> >
> > Based board. I am planning to use the already available MBX board's
> > port ( PowerPC-MPC860) for ease of porting.
> >
> > Basically I want to use the HAL header files generated using the ecos
> > config tool for powerpc mbx target and later changing them according to
> > my target specifications. I will compile and link the files using my own
> >
> > make file. Will this generate the correct bin for my target ??
> >
> > I was thinking that .cdl files are used only for generating some
> > #defines in the header files and these header files are used later for
> > compiling source files. Are the .cdl files are used directly during
> > compilation also ?? What is ecos.ecc file ?? Is this file used by the
> > ecos config tool while
> > compiling and linking the source files or only while generating header
> > files ?? Can I edit this file suitably for my target and build the
> > sources ??
> >
> > or ecos.ecc is used for compilaton/linking ??
> >
>
> The CDL files are used to create configuration information, in the form
> of the various ".h" files in <pkgconf/XXX.h> This step happens when you
> run 'ecosconfig tree' (or it's equivalent in the ConfigTool).
>
> The 'ecos.ecc' file is actually a database (CDL description) which
> totally describes the current configuration. It is only used by the CDL
> tools (ecosconfig, ConfigTool)
>
> The best (i.e. most proper) way for you to create a new configuration
> would be to clone an existing one, starting with the CDL files. For
> your system, the 'mbx' is probably a reasonable starting point. Here
> are the steps I follow when making a new configuration like this:
> * Duplicate the HAL hierarchy.
> This [typically] involves some renaming of files, e.g.
> hal/powerpc/mbx/currnet/cdl/hal_powerpc_mbx.cdl
> becomes
> hal/powerpc/mbx/currnet/cdl/hal_powerpc_XYZ.cdl
> whatever XYZ is. Note that this should be the name of your
> platform, not necessarily x68360, etc.
> * Modify platform specific details (in the same HAL hierarchy)
> * Add CDL records to the master database, ecos.db
>
Thanks Gary. As per your suggestions today I could successfully create a new
configuration for my target by copying the mbx targets cdl files. Now I have
to concentrate on changing the source and header files.
>
> A good example to see how this was done would be to compare two
> platforms which are very similar. On the PowerPC, look at 'mbx'
> and 'viper'.
>
> The worst thing to do would be to try and simply modify an existing
> platform in place, with #ifdefs, etc. This would make the code very
> hard to manage and/or keep up to date with our CVS sources.
>
> Good luck. Feel free to ask questions - in this forum, please.
Thanks again Gary..
Regards
Surya