This is the mail archive of the ecos-discuss@sources.redhat.com mailing list for the eCos project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

答复: [ECOS] The redboot's network interface on i386 main board


Jifl:
    Thank you very much for tell me that no one ported pcmcia to the pc target .that's true.but I still have a question,you say I donot use the net package with redboot,but I looked at the redboot package's  subdirectory,the "net"directory is already exist.and I download the newly ecos from "source.redhat.com"
 but after I make the "redboot.bin",and 'dd' it to the floppy,then boot my pc target ,the screen display still is No Network interface found,the command fconfig still unavailable.this maters actually make me confusion!
                                      thanks a lot
                                                   BEST REGARD 
                                                              2001.8.15
                                                                                       chang

-----原始邮件-----
发件人: ecos-discuss-owner@sources.redhat.com [mailto:ecos-discuss-owner@sources.redhat.com]代表 Jonathan Larmour
发送时间: 2001年8月14日 22:14
收件人: jwchang@iwncomm.com
抄送: ecos-discuss@sources.redhat.com
主题: Re: [ECOS] The redboot's network interface on i386 main board


jwchang wrote:
> 
> Hello !all
>      I  am working on the i386 main board,with redboot/ecos,when I make the redboot.bin file,the compiler cannot go through,following is the summary what I have done:
>          1>I have get the current version of ecos packages via "CVS",ecosconfig with version 1.3.1.4
>           2>i type the following in redhat linux 6.2
>               $ ecosconfig new pc redboot
>              the following is some  message of some new referred values and interface
>                I add the packages about ethernet card via typing following
>              $ecosconfig add pcmcia
>              $ecosconfig add net_drivers
>              $ecosconfig tree
>              $make
>          following is the message of making,in the end throw out two error,Say the package pcmcia have not hardware io support.

No-one has ported PCMCIA to the PC target. 
 
>           I have following questions:
>               I wander if something is wrong with my package repository,but it is downloaded just before I do that?
>              I tried to add the package net to the work but the screen displayed there are 8 conflicts,what's wrong?

You don't use the net package with redboot.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine

Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]